Centrifuges

RECERTIFIED ITEM

£ 13,000.00 (ex. VAT) 1 in stock

Beckman Coulter Optima MAX-XP Ultracentrifuge Lab

ITEM-39906

Beckman Coulter Optima MAX-XP Ultracentrifuge

This item was removed from a university where it was surplus to requirement.

This unit has been professionally serviced and is in full working order.

It is in excellent cosmetic condition with minor marks.

There is no rotor included.

£ 12,500.00 (ex. VAT) 1 in stock

Beckman Coulter Optima L-100 XP UltraCentrifuge w/ 45 Ti Rotor 45000rpm Lab

ITEM-46443

Beckman Coulter Optima L-100 XP UltraCentrifuge Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in complete working order.

Included;

1 x Beckman 45 Ti Rotor

Max RPM - 45,000.
Max RCF - 235,000 x g.
k Factor - 133.
Tube Number / Volume / Size / Dimensions: 6 x 94 mL. 1 ½ x 4 in. 38 x 102 mm.
Rotor Capacity - 564 mL.

£ 10,000.00 (ex. VAT) 1 in stock

Beckman Optima XL100K Ultracentrifuge w/ Sorvall AH-629 & RPS40T-832 Lab

ITEM-41835

Beckman Optima XL100K Ultracentrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Also includes the following:

Sorvall AH-629 Rotor

RPS40T-832 Rotor

Neither rotor includes the vial buckets.

£ 9,850.00 (ex. VAT) 1 in stock

Beckman Optima XL-100K Ultracentrifuge & 70 ti Rotor Lab

ITEM-37205

Beckman Optima XL-100K Ultracentrifuge Lab

CAT no. 365669

Serial no. COX97D02

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order when tested on-site, the previous client has also stated it was in working order prior to removal.

There is no rotor included.

SPARES/REPAIR ITEM

£ 8,000.00 (ex. VAT) 1 in stock

Cepa Z-41 High Speed Centrifuge

ITEM-41154

Cepa Z-41 High Speed Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. It runs on a timer delay so takes a few moments to start working.

It is in good cosmetic condition.

£ 6,750.00 (ex. VAT) 1 in stock

Thermo Scientific Sorvall Legend XFR Centrifuge With 4700rpm Rotor ab

ITEM-38127

Thermo Scientific Sorvall Legend XFR Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition both internally and externally.

The item powers on and works as intended, it has been temperature-tested. (Thermometer not included)

Also includes the following:

Thermo Scientific 75003607 TX-750 Rotor & 75003608 750mL Round Buckets (set of 4)

Max Speed: 4700 rpm

Max RCF:4816 x g

£ 4,500.00 (ex. VAT) 1 in stock

Sorvall Evolution RC Floor Standing Centrifuge w/ Sorvall SLA-1500 Lab

ITEM-45551

Sorvall Evolution RC Floor Standing Centrifuge w/ Sorvall SLA-1500 Super-Lite Autoclavable Rotor

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge powers on and is in good cosmetic condition. Temperature and RPM testing were conducted successfully.

Temperature Testing :

Set to -20.0ºC, stabilized at -18.0ºC
Set to 37.0ºC, stabilized at 37.0ºC
Set to 40.0ºC (max), stabilized at 40.0ºC

RPM Testing:

Held steady at 15,000 RPM

Included Rotor:

Sorvall SLA-1500 Super-Lite Autoclavable Rotor (max 121ºC)
In good cosmetic condition

RECERTIFIED ITEM

£ 4,500.00 (ex. VAT) 1 in stock

Beckman Optima L-90K Ultracentrifuge Lab

ITEM-35050

Beckman Optima L-90K Ultracentrifuge Lab

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced, it is in full working order, and the full report is available on request.

It is in good cosmetic condition with minor marks.

A rotor is not included.

£ 4,000.00 (ex. VAT) 1 in stock

Thermo Scientific Legend X1R Centrifuge with 5000rpm Rotor Lab

ITEM-45152

Thermo Scientific Legend X1R Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge is in very good used cosmetic condition, showing signs of general use. It has been tested and operates as expected.

The unit powers up and is in good working order.

Includes:

User manual

Rotor - 75003629 - 5000rpm with 4 x 75003655 Buckets

£ 3,820.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-E Centrifuge

ITEM-35784

This Beckman Coulter Avanti J-E Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further as we do not have a compatible rotor in stock. We think it requires a rotor with a magnet fitted.

It is in good cosmetic condition with minor marks.

£ 3,000.00 (ex. VAT) 1 in stock

Sorvall Discovery 90 SE Floor-Standing Centrifuge Lab

ITEM-37194

Sorvall Discovery 90 SE Floor-Standing Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, it has been tested at 70,000rpm using a Beckman 70.1Ti rotor.

The rotor is not included.

SPARES/REPAIR ITEM

£ 3,000.00 (ex. VAT) 1 in stock

Sorvall RC 5C Plus RC-5C+ Centrifuge Lab

ITEM-37328

Sorvall RC 5C Plus Centrifuge Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on.

However, during testing, the item produced the following code: Error Code 4 - indicating a 'Drive system failure'.

Which prevented further testing from being conducted.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 3,000.00 (ex. VAT) 1 in stock

Beckman Coulter Optima L-100 XP Ultra Centrifuge Spares/Repair Lab

ITEM-45138

Beckman Coulter Optima L-100 XP Ultra Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge is in good cosmetic condition with minimal signs of use.

However, there is an issue with the screen staying black during boot, indicating a potential PC graphics fault.

It also has a vacuum error

For the above-listed reasons, it is listed as Spares/Repair.

£ 2,950.00 (ex. VAT) 1 in stock

Sigma 3-16KL Refrigerated Benchtop Centrifuge Lab

ITEM-45154

Sigma 3-16KL Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge is in very good used cosmetic condition, showing signs of general use. The rubber boot around the motor shaft is perished and torn due to age and wear but can be easily replaced and does not affect the unit's operation.

Functionality:

Powers up and runs as intended.
Tested at -10ºC and 37ºC, with temperatures reached as expected.

Included Accessories:

Rotor - Sigma 11180 4700rpm Rotor with Sigma 13190 Buckets

Bucket Adapters:
4 x Sigma 17355
4 x Sigma 17356
8 x Sigma 17358
4 x Sigma 17359
4 x Sigma 17362
4 x Sigma 17377
3 x Sigma 17190 lids for the buckets

Also Included:

Instruction manual

£ 2,625.00 (ex. VAT) 1 in stock

Thermo Electron Heraeus Multifuge 4 KR Refrigerated Centrifuge with Rotor Lab

ITEM-31126

Thermo Electron Heraeus Multifuge 4 KR Refrigerated Centrifuge with Rotor

This was removed from a lab where it was surplus to requirements.

The unit has been fully tested and is in full working order up to 4400rpm.

It is in good cosmetic condition but has a crack in the lid viewing window. It does not affect the operation.

Included with it are;

Sorvall Heraeus Rotor

75006476

Max 4400 rpm

4 x Sorvall Heraeus Buckets

75006477 F

Max 4400 rpm

£ 2,500.00 (ex. VAT) 1 in stock

Thermo Scientific Heraeus Biofuge Primo R Centrifuge Lab

ITEM-37243

Thermo Scientific Heraeus Biofuge Primo R Centrifuge

This item was removed from a university where it was surplus to requirements.

The centrifuge is in very good cosmetic condition and has been tested to confirm functionality.

Specifications:

Model: Heraeus Biofuge Primo R

Included:

Swing-Bucket Rotor 7591
4 x 7555 Buckets with clear adaptors, each holding 3 x 5ml tubes.

£ 2,500.00 (ex. VAT) 1 in stock

Eppendorf Refrigerated Laboratory Centrifuge 5804 R Lab

ITEM-20284

This Eppendorf Refrigerated Laboratory Centrifuge 5804-R was removed from a university lab where it was surplus to requirements

The unit has had a replacement actuator and gas strut fitted by a service engineer who then fully tested the unit.

Speed tested to 3600rpm (rotor not included).

It was then temperature tested with a digital thermometer (not included)

37ºC our thermometer showed 34ºC.

4ºC our thermometer showed 1.0ºC.

-9ºC(min) our thermometer showed -5.0ºC.

We would suggest that it was the probe placement that caused the temp readings to be a bit inaccurate.

£ 2,490.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-25 Centrifuge Lab

ITEM-41342

Beckman Coulter Avanti J-25 Centrifuge Lab

This was removed from a lab where it was surplus to requirements.

The unit has been tested and is in full working order up to 18,000 RPM.

It is in good cosmetic condition internally and externally.

This item has been tested using an in-house JA 18.1 rotor, not included.

£ 2,490.00 (ex. VAT) 1 in stock

Thermo Scientific Model Heraeus Biofuge Primo R Centrifuge Lab

ITEM-37242

Thermo Scientific Heraeus Biofuge Primo R Centrifuge

This item was removed from a university where it was surplus to requirements.

The centrifuge is in very good cosmetic condition and has been tested to confirm functionality.

Specifications:

Model: Heraeus Biofuge Primo R
Included:
Swing-Bucket Rotor - 7591
4 x Buckets with clear adaptors, each holding 3 x 5ml tubes.

£ 2,250.00 (ex. VAT) 1 in stock

Hettich Rotina 380 R w/ 1760 & 1798 Rotors Lab

ITEM-38125

Hettich Rotina 380 R

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition both internally and externally.

The item powers on and works as intended, it has been temperature-tested. (Thermometer not included)

The Unit comes with the following Rotors:

Hettich 1760 Rotor

2 x 500 g

4000 RPM

S/N - 007162

Hettich 1798 Rotor

4 x 300 g

4000 RPM

S/N 006337

Buckets - 4 x Hettich 5092 005159

£ 2,000.00 (ex. VAT) 1 in stock

Hettich Universal 32 R Centrifuge with 4000rpm Rotor Lab

ITEM-45197

Hettich Universal 32 R Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge powers on and is in fair cosmetic condition. It has been tested for Temperature and RPM functionality and is in good working order.

Testing Summary:

RPM: Successfully reached 2000 RPM and 4000 RPM.

Specifications:

Model: Universal 32 R
Serial No.: 0003465-01-10

£ 2,000.00 (ex. VAT) 1 in stock

Sorvall Discovery M150 SE Centrifuge w/ S140-AT Fixed Angle Titanium Rotor Lab

ITEM-44516

Sorvall Discovery M150 SE Centrifuge w/ S140-AT Fixed Angle 35º Titanium Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and good working order.

This unit is currently on wheels but also includes 4 x replacement feet.

Also included:

S140-AT Fixed Angle 35º Titanium Rotor.

10 x 2mL
140,000rpm
K factor: 5
Max tube length 34mm
Max tube diameter 11mm

£ 1,750.00 (ex. VAT) 1 in stock

Jouan MR22i Refrigerated Centrifuge With 2 x AM50.14 Rotors Lab

ITEM-46258

Jouan MR22i Refrigerated Centrifuge With 2 x AM50.14 Rotors Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good working order and in reasonably good cosmetic condition.

Includes;

2 x Jouan AM50.14 Rotors

£ 1,750.00 (ex. VAT) 1 in stock

Sigma 4K10 Refrigerated Centrifuge with 3 x Rotors Lab

ITEM-38131

Sigma 4K10 Refrigerated Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition internally and externally.

It powers on and is in good working order when set to low temperatures, it did however remain at 26˚c when set to 37ºc.

The Unit comes with 3 Different Rotors

No. 1: Sigma Rotor Swing-out rotor Nr. 11140

-G=960 g

-5500/min

-4 x 284 Bucket

-12 x sample holders (3 sets of 4 )

No. 2: Sigma Rotor Nr. 12167

-13000/min

-G=86g

No. 3: Sigma Angle Rotor 12166

-No info.

£ 1,500.00 (ex. VAT) 1 in stock

Fisher Scientific AccuSpin 1 Centrifuge Lab

ITEM-38130

Fisher Scientific AccuSpin 1 Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and good working order, it has been tested to 4000 RPM. The rotor is rated at 6000rpm, but the machine is limited to 4000.

Also included:

Fisher Scientific 75003454 Sealed Rotor

-Maximum permissible load 4 x 510

-Maximum speed max (rpm) 6000

-Maximum RCF value at max 6238

£ 1,500.00 (ex. VAT) 1 in stock

Beckman GS-6R Benchtop Laboratory Centrifuge with 3750rpm Rotor Lab

ITEM-36817

Beckman GS-6R Benchtop Laboratory Centrifuge with 3750rpm Rotor Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order.

It is in good cosmetic condition with minor marks from use.

Rotor;

Beckman GH3.8 Rotor. 2 buckets have 349950 inserts. 14 x 15mL, 18mm tubes.

£ 1,375.00 (ex. VAT) 1 in stock

Thermo IEC Centra CL3-R Refrigerated Centrifuge - 4600rpm Lab

ITEM-18032

This Thermo IEC Centra CL3-R Refrigerated Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested. It is in good working order.

It is in reasonably good cosmetic condition with some marks from use.

The unit comes with;

1 x IEC 243 Rotor.

4 x 12-04 Thermo 51138 271.0G Buckets.

2 x Thermo Electron IEC 6562 140.0 GMS 02-06 Adaptors.

2 x Thermo Electron IEC 6566E 156.0G Adaptors.

The 6562 Adaptors have 8 wells that are 17.5mm in diameter and 100mm deep. The 6566E Adaptors have 58.5mm deep tube wells but extend to the top of the adapter making them 99mm deep.

£ 1,250.00 (ex. VAT) 1 in stock

Heraeus Labofuge 400R Refrigerated Centrifuge With Swing Rotor Lab

ITEM-41466

Heraeus Labofuge 400R Refrigerated Centrifuge With Swing Rotor Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Also includes the following:

1 x Heraeus 8179 Swingout Rotor 4 x 180ml

1 x Round Bucket 180ml

75008172

8 x Bucket Insert

SPARES/REPAIR ITEM

£ 1,250.00 (ex. VAT) 1 in stock

Sorvall Discovery 100SE Refrigerated Floor Standing Centrifuge Lab Spares/Repair

ITEM-29790

Sorvall Discovery 100SE

This was removed from a university lab where it was surplus to requirements.

The unit is missing the power switch and the cable is split. It looks like some other parts have been removed and cables have been disconnected inside.

It is in otherwise reasonable cosmetic condition with minor marks from use. The rear panel is showing signs of damage.

It is sold for spares/repairs.

£ 1,235.00 (ex. VAT) 1 in stock

Heraeus Megafuge 1.0R Refrigerated Centrifuge With 2800RPM Rotor

ITEM-39094

Heraeus Megafuge 1.0R Refrigerated Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. The refrigeration was tested at 4˚C and worked well.

It is in good cosmetic condition with marks from use.

Rotor max RPM- 2800

The rotor holds 24 x 15ml tubes

RECERTIFIED ITEM

£ 1,150.00 (ex. VAT) 1 in stock

Heraeus Function Line Labofuge 400R Centrifuge Lab

ITEM-45134

Heraeus Function Line Labofuge 400R Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge powers on and is in fair cosmetic condition. It includes a swinging bucket rotor with four buckets and has been tested for temperature stability at high speed.

The rotor is locked in place and cannot be removed, but is fully functional.

Testing:

Successfully set to 4ºC and held for 30 minutes at, 4500RPM
Successfully set to 37ºC and held for 30 minutes at, 4500RPM

Specifications:

Model: 400R
Serial No.: 75008162

Included:

Swinging bucket rotor with 4 x buckets (75008172)

£ 1,100.00 (ex. VAT) 1 in stock

IEC CL3-R Bench Top Centrifuge with 4800rpm Rotor IEC 243 Lab

ITEM-37356

IEC CL3-R Bench Top Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition, however we were unable to remove the rotor from inside.

Includes:

IEC 243 Four-Place Swinging-Bucket Rotor (includes 4 Buckets).

Max. Force: 3200xG
Capacity: 4 x 250mL
Max. Speed: 4000rpm.

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Coulter Bench-top Optima TLX Ultracentrifuge Lab

ITEM-37453

Beckman Coulter Bench-top Optima TLX Ultracentrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up but does not run. The door locking vacuum and temperature features work, but it does not spin. We tested it with a TL series rotor (not included).

It is in good cosmetic condition, with marks from age & use.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-HC Centrifuge Lab Spares/Repairs

ITEM-31551

Beckman Coulter Avanti J-HC Centrifuge

This item was removed from a university lab where it was surplus to requirements.

The centrifuge is in good cosmetic condition and powers on. However, due to an imbalance issue, no further testing could be conducted.

The spindle is bent.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm Lab Spares/Repairs

ITEM-34798

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm

This was removed from a university lab where it was surplus to requirements.

The unit powers up but half of the keypad no longer works. It is sold for spares/repairs.

£ 805.00 (ex. VAT) 1 in stock

ALC Multispeed Refrigerated Centrifuge PK 121 R + T515 4300rpm Rotor Lab

ITEM-16480

This ALC Multispeed Refrigerated Centrifuge PK 121 R was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition but has been previously used. The start button is damaged but still works.

The unit powers on and has been tested. It spins up to 4100rpm, but the rotor is rated at 4300rpm. When set to its lowest which is -10 degrees it got down as low as -12. When set to its max which is 40 degrees it displayed 39 and was at 37.

The Rotor number displayed T515.

The Buckets Serial number is 0306/01.

The buckets Cat Number is 11210335.

The number on the bottom of the buckets is Ch. 007027 S.303.

The bucket adaptors inside the buckets were numbered ALC R2035 & the Cat Number is 11172435.

The ALC 2035 Adapter is for 50ml tubes.

SPARES/REPAIR ITEM

£ 800.00 (ex. VAT) 1 in stock

Thermo Scientific Sorvall Discovery M120 SE Centrifuge Spares/Repairs

ITEM-35813

This was removed from a university lab where it was surplus to requirements

THe unit powers up but shows error 48 which is a door lock error. It seems like the door solenoid is not being sent a signal.

It is sold for spares/repairs.

No rotor included.

£ 800.00 (ex. VAT) 1 in stock

Beckman GS-6KR Centrifuge with PTS-2000 Rotor Lab

ITEM-37244

Beckman GS-6KR Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order.

During tested, the item reached a maximum temperature of 32ºc, but successfully chilled to a minimum of -10ºc. It was tested at the rotors top speed of: 3250 RPM.

Includes:-

Beckman PTS-2000 Swinging Bucket Rotor Centrifuge
4 x Buckets, the cover for one of the baskets is not included.

£ 760.00 (ex. VAT) 1 in stock

Heraeus Labofuge 400 Function Line Benchtop Centrifuge 3500rpm Max Lab

ITEM-36950

Heraeus Labofuge 400 Function Line Benchtop Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs smoothly up to 3500rpm.

It is in reasonable cosmetic condition with light marks and rusting.

Heraeus Rotor #8179

4 x Buckets #8172 Ch.003515

£ 750.00 (ex. VAT) 1 in stock

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge with 6000rpm Rotor Lab

ITEM-40061

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs well to 6000rpm. It also cools and incubates as it should.

It is in good cosmetic condition with minor marks.

It is supplied with;

MSE Rotor 43124-141

SN - 7962

Max RPM - 6000

4 x Buckets

4 x Beige Adaptors hold 1 x 50ml tube each

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Beckman Optima LE-80K Centrifuge Spares/Repair Lab

ITEM-46445

Beckman Optima LE-80K Centrifuge Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but encounters issues when attempting to reach set speeds; the machine beeps and displays messages about microns and speed, then slows down.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Sorvall RC-5C+ Plus Floorstanding Centrifuge Lab Spares/Repairs

ITEM-41038

This Sorvall RC-5C Plus Floor-Standing Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up, but shortly after running it produces error code 7 preventing it from being tested, therefore this item is sold as Spares or Repairs.

Error 7 = REFRIGERATION SYSTEM FAILURE There was no apparent drop in chamber temperature thirty seconds after the refrigeration system started to cool. Notify your Thermo Field Service Engineer.

£ 750.00 (ex. VAT) 1 in stock

Eppendorf 5402 Refrigerated Centrifuge w/ Eppendorf F-45-18-11 Rotor Lab

ITEM-46193

Eppendorf 5402 Refrigerated Bench-top Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good working order, however the display screen backlight is slightly dim.

Includes;

Eppendorf F-45-18-11 fixed angle rotor
Capacity: 18 x 1.5/2.0mL

RECERTIFIED ITEM

£ 730.00 (ex. VAT) 1 in stock

Durafuge 100 Precision Centrifuge Cat no. 51231201 with SO-1X Rotor Lab

ITEM-26173

Durafuge 100 Precision Centrifuge Cat no. 51231201 with SO-1X Rotor

This was removed from a university lab where it was surplus to requirements.

It has been tested by a service engineer and is in full working order. It is in very good cosmetic condition with only minor marks from use. A brand new gas strut was fitted by the engineer.

Rotor - Precision SO-1X

Cat no. 51231203

4 x Swinging buckets - SO-1X

Cat no. 51231221

SN - 1302/01

4 x Adaptors to fit 15ml tubes

Cat no. 51231208

£ 700.00 (ex. VAT) 1 in stock

BECKMAN Model J2-21 Floor Standing Centrifuge Lab

ITEM-21249

This BECKMAN Model J2-21 Floor Standing Centrifuge was removed from a university lab where it was surplus to requirements.

The unit is in full working order but is not supplied with a rotor.

It is in reasonably good cosmetic condition but has cracks on the door hinge and latch.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Carl Padberg Zentrifugenbau Filter Centrifuge LE Lab Spares/Repairs

ITEM-36357

This Carl Padberg Zentrifugenbau LE was removed from a university lab where it was surplus to requirements.

The cosmetic condition of this item is fairly good and it has powered on.

We set the unit to 20,000rpm. It does ramp up quite slowly to speed. It reached 21,000+ and started to hold speed.

We're not sure how accurate the speed adjustment is. It didn't seem to fully hold at 20,000rpm, it kept slowly rising. The belt looks like it needs replacing too.

For this reason, It is sold for spare/repairs

The speed range is from 15000 to 40000 rpm.

Additionally included:

1x New Brunswick Scientific power supply switching/speed selection unit

1x Huber and Moser motor

£ 680.00 (ex. VAT) 1 in stock

Jouan BR3.11 Refrigerated Benchtop Centrifuge Lab

ITEM-29891

This Jouan BR3.11 Refrigerated Benchtop Centrifuge was removed from a university lab where it was surplus to requirements

The unit powers up and is in good working order, but the lid has to be opened manually. The automatic switch is broken

It is in good cosmetic condition with minor marks.

Rotor Arm:

Max Load 2.8kg

Max RPM 5150

Buckets x 2:

Dimensions L5.5cm x W5.5cm x H9.5cm

Rotor:

Part No. 803

6 Hole

Dimensions L2cm x W2cm x H4cm

SPARES/REPAIR ITEM

£ 600.00 (ex. VAT) 1 in stock

Sorvall Legend RT Centrifuge w/ 4600rpm Swinging Arm Rotor Lab Spares/Repairs

ITEM-36501

Sorvall Legend RT Centrifuge

This system was removed from a university lab where it was surplus to requirements.

The unit powers on, but it shows Error 21 when attempting to spin, causing the unit to cut out. The refrigeration system functions well, and the unit is in good cosmetic condition with minor marks.

Due to the error, this item is listed as Spares/Repair.

The unit is fitted with the following rotor:

Sorvall Rotor
P/N: 75006445
S/N: 004061

Includes:

4 x Sorvall Swinging Buckets
P/N: 75015679

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-E Centrifuge Lab Spares/Repairs

ITEM-29745

Beckman Coulter Avanti J-E Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has several faults. The unit requires a new board, flash card and cooling system.

It is in good cosmeti condition with minor marks.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman L8-80MW Ultracentrifuge Lab

ITEM-44394

Beckman L8-80 Ultracentrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition externally and powers on, however, when tested we attempted to run the unit with a 70Ti rotor (not included), but encountered cooling system and speed sensor errors.

Also, oil was discovered under the rotor and in the chamber/motor area, possibly due to a worn seal.

Due to the above faults, this item is listed as Spares/Repair.

The 3-phase plug has been removed and there is no rotor included in the sale.

Also included:

1 x Operation Key

1 x Original User Manual

Centrifuges

Filters