Medical
Items 1 to 22 of 22
£ 12,000.00 (ex. VAT) 1 in stock
Bruker Skyscan 1178 In Vivo Micro CT Fast X-RAY Microtomograph Lab
ITEM-46256
Bruker Skyscan 1178 In Vivo Micro CT Fast X-RAY Microtomograph
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further due to limitations at our facility.
According to information provided by the previous owner, the unit was last used approximately eight or more years ago. There were no known faults at the time of last use, however it is likely due to the extended period of inactivity, the x-ray tube may no longer be functional and may require replacement. We are unable to confirm this.
Disclaimer; Users should seek technical expertise before attempting to power on, as inactive tubes may present a risk of cracking due to uneven heating.
Includes:
- Manual
Max Sample Dimensions;
- 80mm diameter x 200mm height.
£ 10,000.00 (ex. VAT) 1 in stock
Renishaw Incise Dental Scanner Lab
ITEM-40985
Renishaw Incise Dental Scanner
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order, however the PSU is not included.
The software is not included.
Please note; The software required is no longer supported with this device.
£ 4,750.00 (ex. VAT) 1 in stock
Digital CR Reader CR30-XM With Cassettes Lab
ITEM-45011
Digital CR Reader With Cassettes
This item was removed from a university where it was surplus to requirement.
The item is in good cosmetic condition.
It powers on, we are unable to conduct further testing at our facility.
The previous client has stated it was in working order prior to removal.
No software is included.
S/N: 3985
£ 1,000.00 (ex. VAT) 1 in stock
12 x Laerdal Rususci Anne Torso Manikins w/ 5 x 20 Hypaguard Face Shields
ITEM-48643
Laerdal Resusci Anne Torso Manikins (x12) with Hypaguard Face Shields
These items were removed from a university where they were surplus to requirements.
The manikins are in good condition, showing typical cosmetic wear around the backs and heads consistent with previous use.
Includes:
- 12 x Laerdal Resusci Anne torso manikins (1 missing the torso panel)
- 5 x packs of 20 Hypaguard face shields with one-way valves
- 1 x open pack containing 7 Hypaguard face shields
£ 1,000.00 (ex. VAT) 1 in stock
CAE Healthcare METIman Patient Simulator Lab
ITEM-38698
CAE Healthcare METIman Patient Simulator Lab
This item was removed from a university lab where it was surplus to requirements.
It is in good clean condition, due to the power supply not being included we are unable to test it.
Operating System Support Minimum Requirements available on request.
This item includes a MacBook with the operation manual on it. Unfortunately, it seems like the software was deleted before we received the system.
This MacBook requires a plug-in connection to remain powered on, when the cable is removed it no longer powers on.
*Examination bed not Included*
No power leads supplied with the Item.
£ 650.00 (ex. VAT) 1 in stock
Chattanooga Group Hydrocollator Hot PackHeater SS-2
ITEM-43013
Chattanooga Group Hydrocollator Hot PackHeater SS-2
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and has been successfully temperature tested.
Includes;
- Hydropak Steam Pad
- Wooden Tongs
£ 500.00 (ex. VAT) 1 in stock
Sartorius YDP30 Thermal Transfer Printer Lab
ITEM-49898
Sartorius YDP30 Thermal Transfer Printer Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
Includes;
- Power Supply
- Serial Cable
£ 500.00 (ex. VAT) 1 in stock
Maternity Birthing Simulator Cervix Examination - Limbs & Things - Adam Rouilly
ITEM-38859
Maternity Birthing Simulator Cervix Examination - Limbs & Things - Adam Rouilly
They are in generally good cosmetic condition but some of the latex items have torn.
2 X Cervix Examination Set - ESP ( Only the 1 Unit to use them with However)
2 X Birthing Simulator with removable Bumps - Adam Rouilly
2 X Prompt Birthing Trainer - Limb & Things
2 X Basic Obstetric Models - no Branding
2 X Babies with detachable Placenta
1 X Anatomically Correct Baby (Very heavy and sounds like it has liquids inside)
1 X Childbirth Graphics Baby doll with realistic head
1 X Peritoneal Lavage Trainer - Limbs & Things
2 X Quick Setup Guide laminated Posters
£ 300.00 (ex. VAT) 1 in stock
Invacare Reliant 350 Stand Assist Max Capacity 159 kg Mobile Hoist
ITEM-47172
Invacare Reliant 350 Stand Assist
This item was removed from a university laboratory where it was surplus to requirements.
The unit and its battery charger both power on, and it is in good cosmetic condition. No further testing has been carried out.
Includes:
- Invacare Reliant 350 Stand Assist
- Battery charger
Model: Reliant 350
Maximum Weight Capacity: 159 kg (25 stone)
£ 260.00 (ex. VAT) 1 in stock
OXY-Gas Model ZY-5AC Oxygen Concentrator Lab
ITEM-48858
OXY-Gas Type ZY-5AC Oxygen Concentrator Lab
This item was removed from a university laboratory where it was surplus to requirements.
It is in good cosmetic condition and powers on. We are unable to test it further at our facility.
Run Hours: 310 hours
£ 255.00 (ex. VAT) 1 in stock
OXY-Gas ZY-5AC Oxygen Concentrator Lab
ITEM-48857
OXY-Gas Type ZY-5AC Oxygen Concentrator Lab
This item was removed from a university laboratory where it was surplus to requirements.
It is in good cosmetic condition and powers on. We are unable to test it further at our facility.
Run Hours: 1309 hours
£ 250.00 (ex. VAT) 1 in stock
OXY-Gas Type ZY-5AC Oxygen Concentrator Lab
ITEM-43023
OXY-Gas ZY-5AC Oxygen Concentrator
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition. No further testing has been carried out.
Includes:
- OXY-Gas ZY-5AC Oxygen Concentrator
Model: ZY-5AC
Serial No.: 0C1511007601
Run Hours: 2694
£ 250.00 (ex. VAT) 1 in stock
OXY-Gas Type ZY-5AC Oxygen Concentrator Lab
ITEM-48856
OXY-Gas Type ZY-5AC Oxygen Concentrator Lab
This item was removed from a university laboratory where it was surplus to requirements.
It is in good cosmetic condition and powers on. We are unable to test it further at our facility.
Run Hours: 978h
£ 250.00 (ex. VAT) 1 in stock
OXY-Gas Model ZY-5AC Oxygen Concentrator Lab
ITEM-43022
OXY-Gas ZY-5AC Oxygen Concentrator
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition. No further testing has been carried out.
Includes:
- OXY-Gas ZY-5AC Oxygen Concentrator
Model: ZY-5AC
Serial No.: 0C1511007612
Run Hours: 070
NEW ITEM
NEW ITEM
£ 250.00 (ex. VAT) 1 in stock
Brady BBP 11 Thermal Printer – Brand New
ITEM-47750
Brady BBP 11 Thermal Printer – New
This item was removed from a university where it was surplus to requirement.
It is brand new and was only taken out of its packaging for photography purposes.
Includes;
- Brady Soft Label Design Software Version 8
- Brady Software Quick Start Guide
- Thermal Transfer / direct thermal bar code printer
- EDAC PSU
- Brady R6000 65.0mm x 70M
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 250.00 (ex. VAT) 1 in stock
Dentsply TRIAD 2000 Dental Visible Light Curing System Lab
ITEM-12593
This Dentsply TRIAD 2000 Dental Visible Light Curing System was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition with minor marks.
£ 250.00 (ex. VAT) 1 in stock
Pair of Vitalograph Spirometers Model S PFT Printer Lab
ITEM-44760
2 x Vitalograph Spirometers Model S PFT Printer Lab
These items were removed from a university lab where they were surplus to requirement.
Both power on and are in fairly poor cosmetic condition, we are unable to test them further at our facility.
£ POA 1 in stock
Bruker AXS S2 RANGER X-Ray Fluorescence Spectrometer Lab
ITEM-51559
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Pari eFlow Rapid Nebuliser System Model 178B1007
ITEM-50928
eFlow Rapid Nebuliser System Model 178B1007
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ POA 1 in stock
METI HPS (Human Patient Simulator) System w/ Software x 2 Lab
ITEM-39990
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Varian 7T210 AS Preclinical MRI System with Chiller, PSU & Accessories
ITEM-52479
Varian 7T210 AS Preclinical MRI System with Chiller, PSU & Accessories
This system was removed from a facility where it was surplus to requirements.
The system is in good cosmetic condition with typical signs of previous laboratory use. We have been unable to power the MRI system on safely at our facility, therefore no functional testing has been carried out.
The previous owner stated the MRI system was operational prior to removal and was professionally shut down and decommissioned by engineers.
Main System
- Varian 7T210 AS Preclinical MRI System
- Model: 7T210 AS
- Serial Number: 17114
System Components
- Copley Controls Model 266 Power Supply Unit
- Model: 266
- Serial Number: 4507B001
- Neslab Merlin M150 Chiller
- Model: M150
- Serial Number: 107281043
- Varian RF Front End
- Model: RF Front End
- Varian MRI System Control Units (3 units)
- Model: MRI System
- Agilent E7012 Emergency Discharge Unit
- Model: E7012 Emergency Discharge Unit
- Serial Number: M07/082
- Powers on
- Rapid Active Decoupling Unit Power Supply
- Model: Active Decoupling Unit Power Supply
- Powers on
Accessories
- Various small parts and accessories
- Pallet of connecting cables
Software
- VnmrJ 4.0i Software Kit
- VMR-200, 2.4 GHz USB A230085 USB Drive
Manuals Included
- Copley Controls Corp Operating, Installation and Service Manual
- Magnet Technology Centre System Manual
- Rapid Instructions for Use – Animal Holder for Rats
- Thermo Neslab Merlin Recirculating Chiller Manual
- Varian NMR Spectroscopy User Guide
- Varian VnmrJ Installation and Administration
- Varian VnmrJ Imaging User’s Guide
- Varian Imaging Acceptance Test Procedures
- Varian 200–600 MHz High-Band High Power Amplifier Manual
- Varian Acceptance Tests and Specifications for MRI Systems
£ POA 1 in stock
Dune Medical Devices MarginProbe P/N SA059000 2015
ITEM-53804
Dune Medical Devices MarginProbe P/N SA059000
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
The previous owner stated it was in working order prior to removal.
Items 1 to 22 of 22