Advanced Analytical Fragment Analyzer Automated CE System

This was removed from a university lab where it was surplus to requirements.

The unit powers up but was supplied without software so we have been unable to test it further.

It is in good cosmetic condition with minor marks from use.

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in good cosmetic condition with minor marks.

Perkin Elmer Chemagic 360 DNA Extractor Magnetic Separator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Also includes the following:

1. Chemagic 96-rod head
2. Instruction manual
3. Dell Optiplex 3070 PC with Chemagic Software
4. Keyboard
5. Mouse
6. Touch-screen monitor
7. 18 x 96 well microplates/holders
8. 2 x Newland wired scanners with stands

Qiagen QIAcube Automated DNA / RNA Purification Robot Shaker and Centrifuge Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in excellent cosmetic condition.

Tests preformed:

Centrifuge.

Time 1: 60 sec

Speed 1: 6000 g

Acceleration: 9

Shaker.

Time: 60 sec

Temperature: 20ºc

Frequency: 2000 rpm

Software Version:

QIAcube batch

Mainboard firmware

Mainboard PLC

Mainboard bootloader

Mainboard CPLD

Ld board firmware

Ld board bootloader

Centrifuge firmware

Centrifuge parameter

U1

FIW-50-061-P

FIW-58-902-S

FIW-50-063-A

PLD-24-006-A

FIW-51-661-A

FIW-51-602-A

FIW-52-881-H

FIW-52-802-A

This Qiagen QIAcube Nucleic Acid Purification System was removed from a university lab where it was surplus to requirements.

The unit powered up and we were able to run some pre-set programs. It ran these tests well. The lab has confirmed that it was functional prior to removal.

We ran a centrifuge program for 3 minutes which ran smoothly and we ran a shaker program for 1 minute which ran smoothly.

It is in good cosmetic condition with minor marks from use.

It comes with;

4 Boxes Filter Tips 1000ul (1024)

10 Boxes Rotor Adaptors (10 x 24)

4 Boxes Filter Tips 1000ul Wide bore (1024)

This Qiagen QIAsymphony Nucleic Acid Purification System was removed from a university lab where it was surplus to requirements.

The unit powers up and we have run a series of maintenance programs on the unit. They all appeared to work exactly as they should.

As far as we can tell, the unit is in full working order.  The lab reported it was fully working prior to removal.

We are unsure of exact date of manufacture, but the first part maintenance was done in 2016, so it will be 2015-2016 age.

We have all the passwords to access it.

It is in very good cosmetic condition with only limited marks from use.

Unit dimensions - L126 W84 H183cm

Inside storage - D66 W64 H54cm

Adjustable shelf.

List of Consumables:-

22 x Packs of Sealed Filter-Tips 200ul B (4 x 32 per pack)

1 x Part used packs of Filter-Tips 200ul B (2 x 32)

Box of 8 Sealed Packs of Filter-Tips 200ul B (4 x 32 per pack) (box unsealed)

3 x Sealed boxes of Sample Prep Cartridges, 8-Well (QTY 336 per box)

2 x Unsealed but full box of Sample Prep Cartridges, 8-Well (QTY 336 per box)

9 x Unboxed Sample Prep Cartridges, 8-Well (QTY Unknown)

4 x Sealed Boxes of Filter-Tips, 1500ul (QTY 1024 per box)

5 x Sealed packs of unboxed Filter-Tips, 1500ul (4 x 32 per pack)

2 x Part used packs of Filter-Tips, 1500ul (QTY 174 altogether)

1 x Sealed Boxed DSP Circulating DNA Kit (ref. 937556)

2 x Sealed Boxes of 8-rod Covers (144 per box)

1 x unsealed Box of 8-Rod Covers (QTY 132)

2 x Unboxed packs of 8-Rod Covers (QTY 24)

4 x Bags of Accessory Troughs (3 x 5 Packs, 1 x 3 pack - QTY 18)

4 x Sealed boxes of RNA Kit (QTY 192 per box)

3 x Boxes of Insert D=13 (QTY Unknown)

5 x Boxes of Insert 2.0ml (QTY Unknown)

1 x Installation Cartridge kit (Boxed with other various pieces)

1 x Boxed O-ring Change Tool Set

4 x Blue Tube Racks

4 x Bags of 3.5ml Tubes (QTY 100 per bag)

1 x Part bag 3.5ml (QTY Unknown)

1 x Wasp Bar Code Reader

4 x SIC -01 Carrier Tubes Sample Track

Tub of mixed spares

1 x Grey unknown piece

Waste drawer safety lock parts

Waste Bags

Qiagen QIAcube HT QIAxtractor Nucleic Acid Purification System w/ VS04 Pump

This was removed from a university lab where it was surplus to requirements.

The system powers up and is in good working order. Both units are in good cosmetic condition.

System includes:

Qiagen QIAcube HT QIAxtractor

S/N: 009284

Qiagen Vacuum Pump Model - VS04

S/N: 009318

Chemagen Chemagic Separation Module I with Software & Accessories

This was removed from a university lab where it was surplus to requirements.

Included in the system are;

1 x Chemagic Magnetic Separation Module I

10 x Tube Racks :-

7 hold 12 x 50ml tubes

2 Hold 12 x 15ml tubes

1 holds 12 x 0.5ml tubes

1 x Chemagen Biopolymer

Vulkan Technic

Order no. 200 03 014

The unit powers on but not tested further.

1 x Compaq PC

Model - Presario S0000

Chemagen/Chemagic Software MSM (Release 5.1.0.6) Installed

1 x DGM Monitor

Model - L-1731W

1 x Compaq Keyboard

1 x IBM Mouse

All PC equipment powers up and seems to be in full working order.

Boxed Accessories:-

178 x Genetix Lids (opened)

100 x Sealed 96 well 2.2ml storage plates

6 x Sealed Nunclon Surface plates

10 x Rubber plates

5 x 384 well plates (S300RXFL)

9 x 96 well 0.1ml slots

8 x 100mm Tissue Culture Dishes

11 x Chemagen Tubes (PK-400500-036-080403)

18 x Microcon YM-100 Regenerated Cellulose

38 x 2ml vials

17 Packs of MicroAmp Optical Caps (8 caps per strip, 12 strips per pack)

25 x Thermo Scientific 0.2ml Skirtled 96 well PCR Plates

57 x fisherbrand Dispenser Tips 12.5ml

Promega SV96 Total RNA Isolation System

2 x Denletstor Metal racks size 38.5 x 15.5cm, 160 squares 1.5 x 15cm each

2 x Wash Buffer 6 Bottles (both full) Volume unknown.

Promega Vac-Man Laboratory Vacuum Manifold

This Promega Maxwell 16 Clinical Instruments Blood DNA Purification System was removed from a university lab where it was surplus to requirements.

The item is in good condition with minor use marks and missing front feet.

This item powered on and ran through a cycle without any issues, but hasn't been tested further.

Last recorded service date: 08:03:2016.

Internal dimensions: L14cm x W26cm x H17cm.

This Qiagen QIAxcel was removed from a university lab where it was surplus to requirements.

The item powers on and is in good used cosmetic condition with some minor marks. We were unable to test it at our facility. There is no software included.

The lab informed us it was working but has seen heavy use.

The block holds 96 x 0.2ml tubes

This item is new in stock. Please enquire for further details.