Items 1 to 20 of 32

Image of item

£ 9,490.00 (ex. VAT) 1 in stock

Genuine General Electric CF6-6 Jet Engine From DC10 Aircraft

ITEM-12357

This jet engine is being sold on behalf of a leading UK universities engineering and aerospace department.


The engine which would have originally cost around 1 million USD was owned by MyTravel Aircraft Engineering. It was designed for the DC10 aircraft.


In 2004, the engine type was retired as MyTravel retired the DC10 and moved to the Airbus Aircraft.


Rather than disposing of the engine, it was moved to this universities engineering department as a training resource for students.


This is a genuine full size jet engine.


Its an extremely rare opportunity to acquire a unit like this.


General Electric Model: CF6-6D1A Jet Engine

Removed from retired DC10-10 Aircraft

Has flown about 40 million miles in its 20-year working life.


Please note - whilst the engine was operational prior to going into storage, it is no longer in service and we can offer no warranties to its current performance. It is initially intended for sale for display / museum purposes only, and therefore we would need to discuss any intended flight of the engine or any of its parts.


There is some damage to the nose of the engine which occurred after the item was collected and is not shown in the original photo. We have got images of the damage.


It is a non negotiable of sale that we will need to diligence check the intended use of any prospective buyer. In most cases, a non-flight disclaimer will be required unless you are able to provide appropriate documentation / evidence to demonstrate that any intended use will meet the requirements of the Civil Aviation Authority or other relevant governing bodies. We can discuss this further with you prior to sale and then we would need to approve any proposed flight plans with our university client prior to sale.

Image of item

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 9,235.00 (ex. VAT) 1 in stock

Heidelberg DWL 200 Laser Lithography Pattern Generator System Faulty

ITEM-23967

This Heidelberg  DWL 200  Laser Lithography Pattern Generator System was removed from a university engineering department where it was surplus to requirements.


We have not carried out any testing of the system.


We were informed that the system does have a fault where it cannot write but it was used around 3-4 years ago, but not for writing or imaging. It can do structural analysis and capture images.


The system does have a vacuum pump in good working order. There is also an operation manual with it.


The unit is in very good cosmetic condition but has to be sold for spares/repairs due to the faults.


Image of item

£ 6,250.00 (ex. VAT) 1 in stock

Graphtec FC2250 Series Cutting Plotter Pro CAD/CAM with Accessories Lab

ITEM-27565

This Graphtec FC2250 Series Cutting Plotter Pro was removed from a university lab where it was surplus to requirements.


The university confirmed that the machine is designed to cut card/paper profiles from CAD files. It sits on castors and measures 1000mm x 1200 x 760mm high. It's only around 4 years old and has had limited use.  


The item powers on and appears to be in working order, the pump runs with suction and the start-up test ran ok. The item is also in good, used cosmetic condition.


Board size - 83 X 95.5cm


Box of small accessories including:-

Graphtec Type CB15U-K30-5 - Qty - 4

Graphtec Type CB15U-K30-5 - Qty - 2

Graphtec Oil Based Ballpoint pen - Qty - 8

2 x USB Cables

2 x Tools

4 x Unknown Red Plastic Parts

4 x Unknown Metal Parts

3 x Metal fittings




Image of item

£ 3,415.00 (ex. VAT) 1 in stock

Mega Electronics Process Conveyor Model - FAPC 3000

ITEM-24386

This Mega Electronics Process Conveyor  Model - FAPC 3000 was removed from a university lab where it was surplus to requirements.


The item powers on but displays the error code 'E1'. We referred to the manual which says this error displays when the system cuts power to prevent permanent damage if the liquid is low in level. We don't believe there is anything wrong with it.


It was not tested further.


The item is in reasonably good cosmetic condition but has some marks from use.


Image of item

£ 2,315.00 (ex. VAT) 1 in stock

GEN3 SYSTEMS DC 2001 Dip Spray Coater

ITEM-24171

This GEN3 SYSTEMS DC 2001 Dip Spray Coater was removed from a university lab where it was surplus to requirements.


The item is in good used condition but we were unable to operate it as it requires pressurised air. It uses 85 c.f.m to operate.


Internal Dimensions: L 56.5cm x D 34cm x H 45cm.


Clamping Bar Length: 46cm, Height Adjustable.


Spare Air Line & Stanhope-Seta 23770-0 Zahn No.3 Cup.


Image of item

£ 865.00 (ex. VAT) 1 in stock

Geotronics Geodolite Surveying Total Station GDL 506B 571 145 080 with Tripod

ITEM-25024

This Geodolite Surveying Total Station  Type: GDL 506B 571 145 080 with Tripod was removed from a university engineering department where it was surplus to requirements.


The item is in good cosmetic condition with marks from general use. The tripod works as intended, the legs can be adjusted easily.


The Unit doesn't power on. It's likely the battery has gone flat and we have no suitable charging dock.


The item also comes with:

1x Tripod

1x Spare Trimble battery unit

2x DE-9 cables

1x Calibration certificate, dated 05/11/09

1x Hard carry case


Image of item

£ 865.00 (ex. VAT) 1 in stock

Geotronics Geodolite Total Station GDL 506B 571 145 080 & Surveying Tripod

ITEM-25025

This Geotronics Geodolite Total Station Type: GDL 506B 571 145 080 & Surveying Tripod was removed from a university engineering department where it was surplus to requirements.


The item is in reasonable cosmetic condition but has some water marks on the larger lens. The hard case has stains and scuff marks from prior handling and the tripod has initials carved into it.


The tripod works as intended, the legs can be adjusted easily but the u doesn't power on.


It's likely the battery has gone flat and we have no suitable charging dock. We are unable to confirm the condition of the battery. It had a white substance on it and we think it may have leaked.


The item also comes with:

1x Tripod w/carry strap

1x Spare Trimble battery unit

2x DE-9 cables

1x Hard carry case


Image of item

£ 825.00 (ex. VAT) 1 in stock

Geodimeter 136 Distance Measuring Station & Carry Case Type No: 571 133 064

ITEM-25037

This Geodimeter 136 Distance Measuring Station & Carry Case  Type No: 571 133 064 was removed from a university engineering department where it was surplus to requirements.


The item is in reasonable cosmetic condition but the theodolite has scratches and chips on its exterior.


The carry case is very scratched and dented/cracked in places. The carry case does come with it a second strap, but it is damaged.


The item didn't power on. It didn't come with any additional cables or batteries. We were unable to test it further.





Image of item

£ 770.00 (ex. VAT) 1 in stock

Sokkisha Sokkia SET4B Surveying Total Station Lab

ITEM-27563

This Sokkisha Sokkia SET4B Surveying Total Station was removed from a university lab where it was surplus to requirements.


It comes in a case with a Manual, 2 x Batteries & Battery Charger.


The item powered on after charging the battery for a while and we were able to focus it around the room.


The item is in a reasonable, used cosmetic condition.


Image of item

£ 625.00 (ex. VAT) 1 in stock

3 x Sets of NC Brown Metal Drawer Component Small Parts Storage Units

ITEM-26284

3 x Sets of NC Brown Metal Drawer Component Small Parts Storage Units


These were removed from a university engineering department where they were surplus to requirements.


Dimensions - D30 W89.5 H107cm

Weight - 65kg approx


Drawer size - D28 W14 H7.5cm


1 - 54 Drawers

2 - 60 Drawers

3 - 46 Drawers


There are lots of dividers spread out amongst the drawers.


They are in reasonable, used condition but do have plenty of scratches, marks, and some rust.


Image of item

£ 615.00 (ex. VAT) 1 in stock

Vibrating Table For Concrete & Plaster with MGC Systems MMFCS63-11-2A Motor

ITEM-23274

Vibrating Table For Concrete & Plaster with MGC Systems MMFCS63-11-2A Motor


This was removed from a university lab where it was surplus to requirements.


The motos powers up and the table vibrates well. It is in reasonably good cosmetic condition but the removable wooden table cover has marks from paint and use.


Table size - L79 W54.5 H56cm


Motor fitted underneath:-

MGC Systems

Type - MMFCS63-11-2A





Image of item

£ 535.00 (ex. VAT) 1 in stock

Sokkisha Sokkia SET3C Surveying Total Station Lab

ITEM-27564

This Sokkisha Sokkia SET3C Surveying Total Station was removed from a university lab where it was surplus to requirements.


It comes in a case with a Manual, 2 x Batteries & Battery Charger.


The item powered on after charging the battery for a while and we were able to focus it.


Item is in a reasonable, used cosmetic condition.


Image of item

£ 520.00 (ex. VAT) 1 in stock

Mitsubishi Graphic Operation Terminal Panel GOT1000 Model - GT1275-VNBD

ITEM-28172

This Mitsubishi Graphic Operation Terminal Panel GOT1000  Model - GT1275-VNBD was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition but has a small scratch in the top right corner.


It has not been tested.

Image of item

£ 520.00 (ex. VAT) 1 in stock

Haskel AGD 1.5 Gas Booster Assembly no. 29605 Lab

ITEM-24366

This Haskel AGD 1.5 Gas Booster  Assembly no. 29605 was removed from a university lab where it was surplus to requirements.


It is in reasonably good cosmetic condition but has some marks from use.


It has not been tested.

Image of item

£ 485.00 (ex. VAT) 1 in stock

Pair of HANBAY MCM-050AB & MCL-050AB Valve Actuators

ITEM-28171

Pair of HANBAY MCM-050AB & MCL-050AB  Valve Actuators


These were removed from a university lab where they were surplus to requirements.


They were removed from a larger engineering rig, but have not been tested.



Image of item

£ 290.00 (ex. VAT) 1 in stock

Flamefast Technology DS200 Brazing Hearth w/ Accessories & Consumables Lab

ITEM-23269

This Flamefast Technology DS200 Brazing Hearth was removed from a university lab where it was surplus to requirements.


The unit is in reasonably good cosmetic condition with some marks from use. It has not been tested.


Assembled height - 200cm


Included with it are;

2 Packs of 1 x Shield (120828)

1 Pack containing 1 x Nozzle 40A (120826)

1 Pack containing 5 x Nozzle 40A (120826)

1 Pack containing 3 x Nozzle 40A (120826)

1 Pack containing 4 x Electrode (120573)

1 Pack containing 1 x Swirl Ring (120576)

1 Pack of 7 x 2% Thoriated Tungsten

2 x Clear bags of unknown pieces

2 x Reels of wire

4 x Tongs




Image of item

£ 285.00 (ex. VAT) 2 in stock

Actrea Pneumatic Actuator with Hindle Cockburns Type - MS

ITEM-24369

This Actrea Pneumatic Actuator was removed from a university lab where it was surplus to requirements.


The rig has several components attached.


Westlock Part no. 2165-00-00-2100-000


RGS Electro Pneumatics

AV6360BOOB


RGS Electro Pneumatics

NEPA125/18/M0/MK4


Hindle Cockburns

Type - MS

SN - S0020044


The unit has not been tested but is in reasonably good cosmetic condition with marks from use.

Image of item

£ 250.00 (ex. VAT) 1 in stock

Rapidor Manchester Powered Donkey Saw Horizontal Hacksaw

ITEM-20216

This Rapidor Manchester Powered Donkey Saw Horizontal Hacksaw was removed from a university engineering workshop where it was surplus to requirements.


The unit is in reasonable cosmetic condition but has general dirt and marks from use.


We were unable to power it up as it was previously hard-wired into the mains.


It has a spare hacksaw blade with it.


Some specs from the info plates;


AUTO-MEMOTA

Cat No. 24ADS

Series 4

Cycles 50


HIGGS Motors

Mac No. 4 0044 150


Saw Blade:

RS 1414-5

350 x 25mm

14" X 1" 

14 T


Please note this unit does not currently have an emergency stop button so the unit will require assessing to meet modern safety standards prior to use.

Image of item

£ 195.00 (ex. VAT) 1 in stock

Lebow Assoc. Inc Load Cell Model no. 3132 2000lbs Lab

ITEM-18442

This Lebow Assoc. Inc Load Cell Model no. 3132 was removed from a university lab where it was surplus to requirements.


The unit has not been tested but is in reasonably good cosmetic condition with marks from use. It comes inside a wooden box.

Image of item

£ 195.00 (ex. VAT) 1 in stock

EFD 1000 DVE Liquid / Epoxy Adhesive Fluid Dispenser

ITEM-24702

This EFD 1000 DVE Liquid / Epoxy Adhesive Fluid Dispenser was removed from a university engineering lab where it was surplus to requirements.


The unit powers on and is in good cosmetic condition.


Dual foot switch:

The unit is in good cosmetic condition.

The LHS foot switch does not appear to do anything.

The RHS foot switch lights up a red bulb on the Liquid dispenser


It was not tested with fluid.


Items 1 to 20 of 32

Filters

Price (£)

to

Condition

Brand