This Becton Dickinson BD LSRFortessa was removed from a university lab where it was surplus to requirements.

The lab informed us it was in full working order prior to removal.

Included are;

1x BD LSRFortessa Model No 649225B1

The unit powers on and is in good cosmetic condition. The fans are working and air can be felt blowing away from the unit.

1x ONEAC Power supply:

Model PCM1500U-CPBB

The unit powers the BD LSRFortessa unit. It is in good cosmetic condition. There are some light tape marks from general use.

1x BD High throughput Sampler:

Cat No. 647701

The unit powers on and is in good cosmetic condition.

1x BD FACSflow Supply System:

Ref, 349227

The unit powers on and is in good cosmetic condition.

1x Nalgene Bottle:

Volume, 2L

The unit is in good cosmetic condition.

1x BD Closed Waste Container:

The unit is in good cosmetic condition.

BD FACSAria II Cell Sorter w/ Fluids Cart PC & Accessories

This was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition but has not been tested as a system as there is no software on the PC.

Included are;

PC - HP Workstation xw4100

2 x NEC MultiSync LCD1970NX 19" Monitors

HP Keyboard

HP Mouse

2 x Rainbow Superflow Dongles

No software present

Parts/Accessories:-

Blue Part in bag Labelled 338505

Part No. 647207

Part No. 647206

2 x Belkin Cables

1 x IB6405 5m Patch Cable

5 x White Caps labelled 335916

8 x Waste Caps labelled 335917

3 x Sealed Caps Ref - 342372

7 x Loose Caps Ref - 342372

12 x Clear Caps

1 x BD Biosciences Adjustable Nozzle 70um (PN - 342908)

1 x 4.5ml Ethanol

1 x Pack of used 5ml tube caps

9 x 5ml Tubes with blue caps

1 x Supor DCF 0.2UM

1 x Red Cable

1 x Black & Yellow Cable

1 x Black Cable

2 x Black Tubing Labelled 334968

5 x Black O-rings labelled 337897

This BD FACSCanto II Cell Sorter w/ Fluidics Cart & PC was removed from a university lab where it was surplus to requirements.

The unit has been tested by a qualified service technician. The unit powers up and communicates with the PC using the supplies FACSDiva software. A message "HTS Sampler Coupler Not Attached" appeared but when they pressed ok, the fluidics started up and it runs as normal.

The HTS sampler looks like it has had some historic leaks inside. We were unable to get it to communicate.

Included are;

BD FACSCanto II Flow Cytometer

BD FACSCanto II Fluidics Cart

Waste Bottle

Shutdown Solution

Decontamination Solution

PC - HP xw4600 Workstation

Monitor - NEC MultiSync LCD2490WUXi 24"

HP Keyboard & Mouse

Applications;

FCAP Array V1.0.1

BD FACSDiva Software V.6.1.3

BD FACSCanto

BD FACS Data Manager

The item also comes with:-

BD FACSCanto II Training Manual

BD FACSCanto II Information Pack

ModFit LT Flow Cytometry Modeling Software 3.0

Pack of Sarstedt 13ml Tubes (Pack almost full - 250 in a full pack)

Tubing & Cables

Manuals/Guides & Software:-

BD Biosciences Software Users Guide

Norton Ghost 14.0

BD Application Handbook 2nd Edition

FCAP Array Software V1.0.1 (Guide,CD & Dongle)

BD FACSCanto II Instructions for use

BD HTS Customer Care Kits Users guide

BD High Throughput Sampler User Guide

BD Cytometer Set up & Tracking Application Guide

BD Getting Started Guide with BD FACSDiva Software

BD FACSCanto Safety & Limitations

BD High Throughput Sampler Safety & Limitations

FACS Academy Flow Cytometry & Immunology Basics Vol.1

2 x FACSCAN Boards

This ACCURI C6 Cell Sorter System was removed from a university lab where it was surplus to requirements.

The unit had previously been in use up until the day it was removed. It was replaced with a new system. It is fully working.

The unit powered on with no problems at our facility. It is in excellent cosmetic condition.

It comes supplied with the PSU, USB lead, software CD, manuals and data books.

This BD Biosciences ACCURI C6 Cell Sorter System was removed from a university lab where it was surplus to requirements.

The unit powers up but as there were no software discs or testing solutions with it we had our service engineer observe the system initialising without the cover on. They reported that it initialised as it should.

It is in very good cosmetic condition with only minor marks from use.

This Beckman Coulter Cytomics FC 500 Cell Sorter System was removed from a university lab where it was surplus to requirements.

We had a qualified service technician test this system. It powers on as normal and communicates with the PC using CXP Cytometer software. The front lid mechanism is loose which makes it difficult to lift it up and the transparent screen isn't on correctly. They required more testing equipment to test it further.

Included are;

1 x Beckman Coulter Cytomics FC 500

Assy no. 6707249

1 x Beckman Coulter FC 500 (Unit on Wheels)

Assy no. 6807323

1 x Beckman Coulter Part no. A98490

1 x Spare Carousel

1 x DTX PC with CXP Software

2 x Eizo 19" Monitors

RareCyte CyteFinder & CyteSealer Liquid Biopsy Analysis System

This system was removed from a laboratory where it was surplus to requirements.

Both units power up and are in good cosmetic condition with marks from use.

It comes with 8 x Trays (53.5 x 16cm). One tray has been labelled as 'Not moving'

This Millipore Guava EasyCyte 8HT Flow Cytometer was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition with only minor marks from use.

The unit has been tested with samples but was showing readings of 200-300 when it should be showing readings of around 50000. We were unable to diagnose the exact fault.

The unit has a Dell Optiplex 7010 PC paired with it. The PC includes a keyboard, mouse, monitor, USB and VGA Cable. It has had a brand new copy of 32bit Windows 7 installed.

Guavasoft 3.1 has also been installed, which includes:

ViaCount.

InCyte (This requires an unlock code from Millipore to run).

easyCheck.

Guava Clean 3.1.

We have been able to open and close the sample tray. This proves that the system is fully connected.

It is sold for spares/repairs.

This ILab 650 Automatic Biochemistry Analyzer Clinical Chemistry System was removed from a university lab where it was surplus to requirements.

The system is in full working order and was in use right up until its removal. We have a video of it working prior to removal.

It comes with the following parts/accessories/spares

PC Accessories include:-

PC - See photos of software working in attachments

ViewSonic 17" Monitor

Keyboard, Mouse & USB Cable

Power supply

PN - 241-03110

SN - 62R1753 6/8KD

Sample Wheel Holds 75 x 5ml tubes

2 x Cuvette Carousels

Bottle/Container

PN - 241-01000-51

SN - U00704000496C1

Other Accessories/Consumables:-

2 x Shimadzu Lamp - PG-64258/ME-MLP

2 x Reagent Probes - 0018470500

Box of 20 x RGT Bottle 25ml

Box of 10 x RGT Bottle 20ml

Bag of 6 x Brown 20ml Bottles

Bag of 10 x RGT Bottle 50ml

Bag of 19 x RGT Bottle 25ml

Bag of 4 x 25ml RGT Adaptors

Bag of 12 x 50ml RGT Adaptors

Box 3 x 5X5 Cuvettes

Box of 30+ Assorted size bottles

it is in reasonably good cosmetic condition but has some marks from use.

Izon Science Ltd - qViro Virus Viral  Particle Analysis System

This was removed from a university lab where it was surplus to requirements.

The item powers on and comes with a USB cable and power supply. It is in good used cosmetic condition.

This was removed from a laboratory where it was surplus to requirements.

The system powers up and is in reasonably good cosmetic condition with marks from use, though there is a plate/tray missing from the front of the XT-2000i

Included are;

1 x Sysmex XT-2000i Automated Hematology Analyzer

1 x Pneumatic Unit Model - PU-17

Software discs:-

Sysmex XT-2000iV Version 00-10

Sysmex SUIT Software Version 2.4.0.0 + USB Back up tool

Sysmex Recovery DVD-ROM XE XT XS IPU DC8000

Sysmex Sybase iAnywhere 5.5.04

Sysmex XT-2000i System Program Type 3XT21 Ver. 15979 (Floppy disk)

This BD Biosciences FACSCalibur was removed from a university lab where it was surplus to requirements.

The lab informed us that the system was in working order prior to being put into storage.

The units are all in reasonably good used cosmetic condition. Most components have various marks from use and writing on them.

The FACSCalibur powers up fine and appears to communicate with the Mac. We couldn't actually get it to run anything as it kept showing the following.

'The cytometer status is not 'ready' because the sheath fluid container is empty'. We think this is likely due to there being no reagents hooked up.

The system consists of:

1 x BD FACSCalibur Flow Cytometer (August 2005).

1 x BD FACSCalibur Training Manual.

1 x Transformer,

1 x Mac G5 1.8ghz PPC OSX 10.3.6.

With the following software installed:

BD CellQuest Pro 5.2.

FACSComp 5.2.

MultiSET 2.2.

Also includes mac keyboard, dell mouse and NEC monitor.

Cables to connect everything up.

The Flow Cytometer appears to have been service last 15/03/17.

It had:

2 x New Gas Springs C781010300

1 x Tubing Clamp C601003100

1 x Pm Kit Scan/Sort/Calib/LSR 343639.

Chemotec NucleoCounter A/S Type 900-0004 Cell Counter

This was removed from a lab where it was surplus to requirements.

The unit powers up and it is in good cosmetic condition with minor marks from use.

It is supplied with a stainless steel bottle holder and a Model LH60A12-P1J Power supply.

This Beckman Coulter Epics XL.MCL Cell Counter was removed from a university lab where it was surplus to requirements.

The system powers up but has not been tested further.

It is in good cosmetic condition but has some marks from use.

BD FACSCalibur System Flow Cytometer Cell Sorter System

This was removed from a university lab where it was surplus to requirements. Everything powers up but we could not get the system to communicate with the PC. It was not tested further.

It is in reasonable cosmetic condition with marks from use. Some parts of the system have quite a bit of rust.

1x BD FACSCalibur Flow Cytometer

Ref 342975

Manufacture date: May 2008

Ser no. E97501016

When opening the lid of the unit some washers are loose inside and an IEC connector is not attached to anything.

1x BD Power Supply;

Cat no. 34002910

Ser no. TE 3679

220V -117V 50-60Hz

1x Apple Mouse:

Model, M5769

1x Apple Keyboard

Model, A1243

1x Keyspan

Part no. USA-19HS

1x NEC Monitor:

Model LCD1970NXp-3

1x Mac Pro Tower:

Model A1186

Software:

There is no password required to open the programs

1x FLOWJO version 9.4.10

1x FLOWJO version 8.8.7

1x FLOWJO version 8.8.2

Cables:

1x VGA cable:

1x BD to Mac Controller cable:

1x Mac Pro power cable:

1x Metal Holder/Stand:

This Sympatec Helos/BF Laser Diffraction Particle Sizer System was removed from a university lab where it was surplus to requirements.

Included in the system are;

1 x SYMPATEC HELOS/BF Laser Diffraction Particle Sizer - The unit powers up but has not been tested further. It is in good cosmetic condition but has marks from use as well as flaking paint on the base. The key is included.

1 x RODOS T4.1. Not tested.

1 x Sympatec Cuvette. Type CUV-50. Not tested.

1 x Vibri. Not tested.

1 x Hard case with padding, marked 'SYMPATEC HELOS MAGIC'. Contains gloves, fuses, one spare piece and 2 Allen keys.

1 x Reference material set

2 x Operating manual folders.

2 x 50ml glass cuvettes.

All the units are in reasonably good cosmetic condition with some marks from use.

We do not have the software for this instrument so we have not been able to test all its functions.

This item is new in stock. Please enquire for further details.