Workshop

SPARES/REPAIR ITEM

£ 495.00 (ex. VAT) 1 in stock

JK Lasers Class 4 MS20 Laser & Accessories Lab

ITEM-18384

This JK Lasers Class 4 MS20 Laser was removed from a university lab where it was surplus to requirements.

The unit came to us with a warning notice on it saying it is strictly not to be used or powered up under any circumstances. We suspect the university was removing it from their facilities for H&S reasons.

It is in reasonably good cosmetic condition but has some glue residue on the top of it and the wheels are stiff. There was also no key for the unit so we could not open the cabinet.

Lot contains:

1 x JK Lasers Class 4 MS20 Laser.

1 x Metal Plate.

1 x Shutter/Fire Switch.

1 x YAG Laser Flashlamp/Q-Switch Controller Glued Together.

The unit is sold for spares/repairs. We can only accept business customers for this item and any potential customer will be required to sign a disclaimer during purchase.

All offers considered on the unit.

SPARES/REPAIR ITEM

£ 495.00 (ex. VAT) 1 in stock

Applied Biosystems 7900HT Fast Real-Time PCR System Spares/Repairs

ITEM-20178

This Applied Biosystems 7900HT Fast Real-Time PCR System was removed from a university lab where it was surplus to requirements. The lab assured us this system was in full working order prior to removal from the lab.

The unit no longer powers up as the PSU blew in testing.

The included PC has Applied Biosystems software on it and it connected with the PCR unit prior to the PSU blowing, but as there is no barcode reader and robot it did not initialise further than this.

It is in good cosmetic condition with only limited marks from use. Inside we found the keys to enable the laser.

There is an instrument log book and a serial cable included with it.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 495.00 (ex. VAT) 1 in stock

Sanyo MCO-17A CO2 Laboratory Incubator Lab Spares/Repairs

ITEM-21193

This Sanyo MCO-17A CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

We powered the unit on with no issues and checked the temperatures with a digital thermometer (not included).

When set to 37˚C the display showed 39˚C and the thermometer measured 41˚C.

When set to 56˚C the display showed 56˚C and the thermometer measured 49.9˚C.

The unit has issues with CO2 regulation and is sold for spares/repairs.

Internal sizes are 49 (L) x 50(W) x 66(H) cm with three shelves.

The item is in very good condition with minor age and usage marks. The door handle is broken but it still operates and does not stop the unit from operating correctly.

SPARES/REPAIR ITEM

£ 495.00 (ex. VAT) 1 in stock

Beckman Coulter Allegra 6R Centrifuge Lab Spares/Repairs

ITEM-36589

Beckman Coulter Allegra 6R Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up but does not operate. We believe it to have a faulty drive belt.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 495.00 (ex. VAT) 1 in stock

SCOTSMAN AF100 Ice Flaker Machine Lab Spares/Repairs

ITEM-38267

SCOTMAN AF100 Ice Flaker Machine

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has a fault with the evaporation temperature and/or an issue with the auger rotation. It is also leaking water.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 495.00 (ex. VAT) 1 in stock

Thermo Scientific HERA CELL 240i CO2 Incubator Spares/Repairs

ITEM-38700

This Thermo Scientific HERA CELL 240i CO2 Incubator was removed from a univerversity lab where it was surplus to requirements.

The unit powers up and the incubation functions works, but it is showing. CO2 Senor Breakage error. For this reason it is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 495.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova 4230 Refrigerated Incubator Shaker Spares/Repair

ITEM-39813

New Brunswick Scientific Innova 4230 Refrigerated Incubator Shaker Spares/Repair

This was removed from a university lab where it was surplus to requirements.

The unit powers up and the incubation function works, but the unit does not shake (the thermometer used for testing is not included).

It is in reasonably good cosmetic condition with minor marks.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 495.00 (ex. VAT) 1 in stock

DW Scientific Whitley Automated Spiral Plater (WASP) System Spares/Repairs

ITEM-39864

This DW Scientific Whitley Automated Spiral Plater was removed from a university lab where it was surplus to requirements.

The unit powers up but did not initiate any sort of self-test on start up. The lab advised us it was faulty.

It is sold for spares/repairs.

Additional items included:

Spiral Plater Tool Kit

Vacuum Sealed Pots x 2

SPARES/REPAIR ITEM

£ 490.00 (ex. VAT) 1 in stock

Luminex 200 Multiplex Assay System & Software Lab Spares/Repairs

ITEM-20618

Luminex 200 Multiplex Assay System

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has a faulty laser. The bead position readings are fine but the laser has a 0 reading.

It is in good cosmetic condition with minor marks.

It is sold for spares/repairs.

Model - Luminex XYP (Bottom)

SN - LXY07131101

Model - Luminex 200 (Top)

SN - LX10007129405

Model - Luminex SD

SN - LXSD07116004

Comes with:-

STarSystems User Information Manual/Binder

Luminex 200 Installation Manual

Tubing and Cables

Luminex XMAP Technology Automated Maintenence Plate

Box of Software including:-

Black Dongle - DK2 for use with STarBase Analysis Software

Purple Dongle - Soft Flow FCAP Array V1.0

STarBase 1.0 (SN 00035) with Dongle

WorklistEditor Software for STarStation V 2.0

STarCollate Software V 2.0 (C20040)

STarStation Software V 2.3 (S23089)

BD FCAP Array Software V 1.0.1

Luminex LX100/200 Verification Kit

Luminex LX100/200 Calibration Kit

XPonent 3.1 for Luminex 100/200

XPonent 3.1 for Luminex 100/200 (7129 Patch)

Luminex 200 Firmware Update V 2.6.1

Luminex 100 IS Software V 2.3 with Assay Developers Workbench

Luminex Manuals and Online Help for Luminex 200 with IS 2.3 Software and Developers Workbench.

Dell E1777FP LCD Monitor Drivers and user Documentation

Dell Drivers and Utillities

SPARES/REPAIR ITEM

£ 490.00 (ex. VAT) 1 in stock

Teledyne Isco CombiFlash Companion TS Personal Flash Chromatography System Lab

ITEM-24519

Teledyne Isco CombiFlash Companion TS Personal Flash Chromatography System Lab

This was removed from a university lab where it was surplus to requirements.

The system powers up but the tablet will not communicate with the PC. It is in other wise good cosmetic condition with minor marks, but is sold for spares/repairs.

Included are;

Teledyne Isco CombiFlash Companion

Model - Combiflash Companion

SN - 207B20161

3 Tube Racks:-

The one slotted in the unit holds 100 x 15ml tubes

One holds 144 x 5ml tubes and has 99 Glass 5ml tubes included

One holds 100 x 15ml tubes and has 32 Glass 15ml tubes included

Fujitsu Siemens Tablet:-

Model - Stylistic ST5010

Part no. CP183709

SN - YBKT011032

Comes with Protective case, mouse and cables/adaptor.

Tablet has CombiFlash Companion Software

SPARES/REPAIR ITEM

£ 490.00 (ex. VAT) 1 in stock

Beckman Coulter LS230 Particle Size Analyser w/ Fluid Module - Spares / Repairs

ITEM-25210

Beckman Coulter LS230 Particle Size Analyser w/ Variable Speed Fluid Module

This was removed from a university lab as it was reported to be faulty. We were not informed what the fault is.

Included in the system are;

1x LS230 Particle Size Analyser

The unit is in good condition but there seem to be quite a few parts taken from the unit. It powers up but was not tested further.

1x LS Variable Speed Fluid Module Plus

The unit is in good cosmetic condition. It powers up but was not tested further.

There is a manual included.

It is sold for spares/repairs due to the suggested fault.

SPARES/REPAIR ITEM

£ 490.00 (ex. VAT) 1 in stock

Beckman Coulter LS200 Particle Size Analyser Spares Repairs - Lab

ITEM-25211

Beckman Coulter LS200 Particle Size Analyser w/ Variable Speed Fluid Module

This was removed from a university lab as they reported it had developed a fault. We do not know what the fault is.

Included in the system are;

1x 1x LS200 Particle Size Analyser

The unit is in reasonable condition but there seem to be quite a few parts taken from the unit. We did not power on the unit due to safety precautions.

1x LS Variable Speed Fluid Module Plus

The unit is in good cosmetic condition. We did not power it up as it requires power to the LS200 but it was reported faulty by the lab.

Unit is sold as spares/repairs.

SPARES/REPAIR ITEM

£ 490.00 (ex. VAT) 1 in stock

Thermo Electron Holten LaminAir Microbiological Class 2 Safety Cabinet Faulty

ITEM-31222

This Thermo Electron Holten LaminAir Microbiological Class 2 Safety Cabinet was removed from a university lab where it was surplus to requirements.

The unit powers up and the airflow and lights work. There is no UV light fitted. The windows do not function as the cables that hold it up and damaged and not connected.

It is in otherwise good cosmetic condition with minor marks.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 490.00 (ex. VAT) 1 in stock

Pyrosequencing PSQ96 Pyrosequencer Lab Spares/Repairs

ITEM-31384

This Pyrosequencing PSQ96 Pyrosequencer was removed from a university lab where it was surplus to requirements.

The unit does not power up and fails a visual PAT test due to exposed wires at the back.

It is in reasonably good cosmetic condition with minor marks from use.

Block - 96 x 0.2ml

SPARES/REPAIR ITEM

£ 490.00 (ex. VAT) 1 in stock

Peak Scientific PH600-UK Lab Hydrogen Generator Spares/Repairs

ITEM-35386

This Peak Scientific PH600-UK Hydrogen Generator was removed from a university lab where it was surplus to requirements

Item is in good cosmetic condition with minor marks but is missing side panel screws and parts have been removed.

Since no tests have been conducted, we have listed this item as spares/repairs.

SPARES/REPAIR ITEM

£ 490.00 (ex. VAT) 1 in stock

Reichert Jung UltraCut Microtome 701701 Ultramicrotome + Controller Faulty

ITEM-35659

Reichert Jung UltraCut Microtome 701701 Ultramicrotome + Controller

This was removed from a university lab where tiwas surplus to requirements.

None of the units powered up in testing and are sold for spares/repairs.

It is in reasonably good cosmetic condition with marks from use.

Included are;

Reichert Jung UltraCut Microtome 701701 Ultramicrotome

Model: 701701

Serial#: 365615

10 x W.F. Cat. 145 Eyepiece (Qty 2)

Dust Cover

Reichart-Jung ULTRACUT Manual

Reichart Controller

Model: 65 11 01

Serial#: 69434

SPARES/REPAIR ITEM

£ 490.00 (ex. VAT) 1 in stock

Buchi Distillation Chiller Model B-741 Lab Spares/Repairs

ITEM-41105

Buchi Distillation Chiller Model B-741

This was removed from a university lab where it was surplus to requirements.

The unit failed a visual PAT as it is missing the side panel test and was not tested further.

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 490.00 (ex. VAT) 1 in stock

Applied Biosystems 7900HT Fast Real-Time PCR System Lab

ITEM-41278

Applied Biosystems 7900HT Fast Real-Time PCR System Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up, however it is unable to connect to a PC due to an issue with the communication port.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 490.00 (ex. VAT) 1 in stock

B.O.B Stevenson Type 355 BI/J Centrifugal Fume Extraction Fan

ITEM-41464

B.O.B Stevenson Type 355 BI/J Centrifugal Fume Extraction Fan

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

The unit has no cabling and is sold for spares/repairs

SPARES/REPAIR ITEM

£ 485.00 (ex. VAT) 1 in stock

6 x Laerdal Vitalsim Vital Signs Simulators

ITEM-29947

6 x Laerdal Vitalsim Vital Signs Simulators

These were removed from a university lab where they were surplus to requirements.

All main units power on and all of the parts are in reasonable cosmetic condition. Some units are missing parts from the bags, and one does have a broken power connection on the back of the main unit which is also labelled.

They are sold as a spares/repairs lot.

Workshop

Filters