3D Printers
Items 1 to 6 of 6
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 505.00 (ex. VAT) 1 in stock
Airwolf 3D NW3D HDX 3-D Printer Lab Spares/Repairs
ITEM-37979
Airwolf 3D NW3D HDX 3-D Printer Lab
This item was removed from a university where it was surplus to requirement.
The back panel is missing and, the wires are exposed, resulting in a visual PAT fail.
Due to the condition stated above, this item is listed as Spares/Repair.
Also included are the following:
- Power lead
- Data cable
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Z Corporation ZPrinter 450 3D Printer Spares/Repair Lab
ITEM-37485
Z Corporation ZPrinter 450 3D Printer
This item was removed from a university laboratory where it was surplus to requirements.
In good cosmetic condition. The printer failed to power on and did not pass the PAT test.
Therefore, it is listed as Spares/Repair.
Specifications;
- Build speed: between 2 to 4 layers per minute
Build volume:
- X-axis: 8 inches (203 mm)
- Y-axis: 10 inches (254 mm)
- Z-axis: 8 inches (203 mm)
- Build capacity: 640 cubic inches
- Layer thickness:
- Minimum: 0.0035 inches (0.089 mm)
- Maximum: 0.004 inches (0.102 mm)
- Color shell thickness: 0.025 inches
- Resolution: 300 x 450 dpi
- Materials:
- Powder: zp130
- Binder: zb59
- Print heads:
- HP11 (clear binder)
- HP57 (single tricolor CMY)
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Dimension BST 1200 3D Printer Spares/Repairs
ITEM-39272
Dimension BST 1200 3D Printer
This was removed from a university lab where it was surplus to requirements.
It is in good cosmetic condition, both internally and externally.
It does not power on, therefore it's sold as Spares or Repairs.
The main board, junction board, CCD board, lighting board, I/F board, laser board, and panel board all have been disassembled from the main unit.
£ 455.00 (ex. VAT) 1 in stock
MakerBot Replicator Model Z18 3D Printer 5th Gen
ITEM-37488
MakerBot Replicator Z18 3D Printer (5th Gen)
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in very good cosmetic condition. No further testing has been carried out, but the previous owner stated it was in full working order prior to removal.
No filament spool is included.
Usage:
- Print time: 188.12 hours
- Mass extruded: 3.1 kg
Specifications:
- Build volume: 25.2 x 19.9 x 15 cm (L x W x H)
- Layer resolution: 100 microns
- Filament type: 1.75 mm
- Nozzle diameter: 0.4 mm
Includes:
- MakerBot Replicator Z18 3D Printer (5th Generation)
£ 450.00 (ex. VAT) 1 in stock
MakerBot Replicator Z18 3D Printer 5th Gen
ITEM-37487
MakerBot Replicator Z18 3D Printer (5th Gen)
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in very good cosmetic condition. No further testing has been carried out, but the previous owner stated it was in full working order prior to removal. No filament spool is included.
Specifications:
- Build volume: 25.2 x 19.9 x 15 cm (L x W x H)
- Layer resolution: 100 microns
- Filament type: 1.75 mm
- Nozzle diameter: 0.4 mm
Includes:
- MakerBot Replicator Z18 3D Printer (5th Generation)
£ 200.00 (ex. VAT) 1 in stock
Gemini Cleaning Systems Genie 460 Glovebox Pressure Wash Cabinet 3D Printing
ITEM-37486
Gemini Cleaning Systems Genie 460 Glovebox Pressure Wash Cabinet
This item was removed from a facility where it was surplus to requirements.
It powers on, and the pressure pump activates when the foot pedal is depressed. The internal light illuminates, and the window wiper operates correctly. Limited testing was carried out with no water connected.
Please note: The glove sleeves are torn where they attach to the cabinet. Some fittings show localised surface rust.
The previous owner stated it is in working order but will require maintenance.
Includes:
- Internal lighting
- Window wiper
- Foot pedal control
Model: Genie 460
Serial No.: GI-04-12
Items 1 to 6 of 6