Barnstead Lab-Line MaxQ 4000 Incubator Shaker Model - SHKE4000-1CE
Item Code: ITEM-28143
Condition: Used
Brand: Thermo Scientific
Location: Wales
£ POA
Unfortunately this item is no longer available. However, we may have similar items available for sale. Please get in touch with us at , or by phone on +44 29 2086 4661.
Description
This Barnstead Lab-Line MaxQ 4000 Incubator Shaker Model - SHKE4000-1CE was removed from a university lab where it was surplus to requirements.
The unit powers up and is working. It has been assessed by an engineer who replaced the lid struts and fitted a new drive belt.
The only issue is the main power button on the front of the unit doesn't appear to work. This does not affect the operation of the unit at all. It just needs to be switched on and off at the main supply. \th button is stuck in the on position.
The incubator function was tested with a digital thermometer (not included).
The temperature was first set to 37°c. when reached temp the thermometer read 37.6°c.
The temperature was then set to its max temp of 60°c, when it reached temp, the thermometer read 58.8˚c.
Item Details
| Property | Value | Tested value |
|---|---|---|
| Electrical Supply | N/A | 1-Phase |
| Plug Included? (1-Phase) | N/A | Yes - Standard UK 3-Pin Mains Plug (BS 1363) |
| PAT Test Result | N/A | Pass |
| PAT Test Date | N/A | 23-07-2024 |
| Voltage | N/A | 240V |
| Type | Unspecified | |
| Refrigeration | No | |
| Minimum Temperature (ºC) | 10 Above Ambient | |
| Maximum Temperature | 60 | |
| CO2 Sensor Type | Unspecified | |
| Heating Method | Unspecified | |
| With Hot Air Sterilisation | Unspecified | |
| Humidifier | Unspecified | |
| With UV Lamp | Unspecified | No |
| General Quality Checks | ||
| Configuration | N/A | Single Unit |
Delivery
Free shipping is not available on this product. This item will be shipped by pallet delivery. Please contact us for a domestic or overseas shipping quote.
Additional terms and conditions
Incubators may be transported via a range of delivery methods, including palletised courier networks or direct delivery to the intended location of use. During transit, internal sensors, fans, or control systems may be affected by vibration or movement.
To ensure optimal performance and accurate environmental conditions, it is essential that all incubators are allowed to stabilise upon arrival and are professionally calibrated before first use. Calibration ensures the unit reaches and maintains the desired temperature, humidity, or CO₂ levels reliably.
Please ensure:
- The unit is left for a minimum of 12 hours upright and unpowered after delivery.
- Calibration is completed in accordance with manufacturer specifications before any use.
Failure to calibrate prior to use may result in inaccurate conditions and affect experimental integrity or compliance with laboratory standards.
Return policy
Buy with confidence. If you wish to return the item, for whatever reason, you may do so within 45 days subject to our terms and conditions. International buyers will have to pay return shipping.
NOTE: No cables, remotes, accessories, power supplies, consumables or any other items are included unless shown in the item photos or detailed above.