New Brunswick Innova 44R Refrigerated Shaking Incubator Lab
Item Code: ITEM-45165
Condition: Used
Brand: New Brunswick Scientific
Location: Wales
£ 7,500.00 exc. VAT (£ 9,000.00 inc. VAT)
If you are interested in this item or would like to place an order, please get in touch with us at , or by phone on +44 29 2086 4661.
Description
New Brunswick Innova 44R Shaking Incubator
This item was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition and in good working order.
The shaker operates up to a maximum speed of 400 rpm but exhibited instability at this speed. It was tested at 300 rpm without the tray and ran smoothly.
The client reported the following:
- Locked screws in the baseplate make the unit unserviceable.
- In working order prior to removal.
It is recommended that the incubator be calibrated onsite for optimal temperature performance.
Specifications:
- Model: New Brunswick Innova 44R
Item Details
Property | Value | Tested value |
---|---|---|
Electrical Supply | N/A | 1-Phase |
Plug Included? (1-Phase) | N/A | Yes - Standard UK 3-Pin Mains Plug (BS 1363) |
PAT Test Result | N/A | Pass |
PAT Test Date | N/A | 28-11-2024 |
Voltage | N/A | 240V |
Part / Catalogue Number | M1282-0006 | |
Type | Floorstanding | |
Refrigeration | Yes | |
Minimum Temperature (ºC) | 4.0 | |
Maximum Temperature | 80 | |
CO2 Sensor Type | No CO2 Sensor | |
Heating Method | Heated Air Blower | |
With Hot Air Sterilisation | No | |
Humidifier | N/A | |
With UV Lamp | No | No |
Shaker Plate Throw | N/A | 1" |
Shaker Mechanism Fitted | Yes | |
Shaker Maximum RPM | 400 | |
General Quality Checks | ||
Lock Fitted | N/A | N/A |
Configuration | N/A | Single Unit |
Physical Specifications | ||
Interior Volume (L) | 276 |
Delivery
Free shipping is not available on this product. This item will be shipped by pallet delivery. Please contact us for a domestic or overseas shipping quote.
Additional terms and conditions
Incubators may be transported via a range of delivery methods, including palletised courier networks or direct delivery to the intended location of use. During transit, internal sensors, fans, or control systems may be affected by vibration or movement.
To ensure optimal performance and accurate environmental conditions, it is essential that all incubators are allowed to stabilise upon arrival and are professionally calibrated before first use. Calibration ensures the unit reaches and maintains the desired temperature, humidity, or CO₂ levels reliably.
Please ensure:
- The unit is left for a minimum of 12 hours upright and unpowered after delivery.
- Calibration is completed in accordance with manufacturer specifications before any use.
Failure to calibrate prior to use may result in inaccurate conditions and affect experimental integrity or compliance with laboratory standards.
Return policy
Buy with confidence. If you wish to return the item, for whatever reason, you may do so within 45 days subject to our terms and conditions. International buyers will have to pay return shipping.
NOTE: No cables, remotes, accessories, power supplies, consumables or any other items are included unless shown in the item photos or detailed above.