Sartorius Certomat BS-1 Double Stack Shaking Incubator Lab Spares/Repairs
Item Code: ITEM-45555
Condition: Spares or Repairs
Brand: Sartorius
Location: Wales
NOTE - THIS IS A SPARES/REPAIRS ITEM
£ 1,000.00 exc. VAT (£ 1,200.00 inc. VAT)
If you are interested in this item or would like to place an order, please get in touch with us at , or by phone on +44 29 2086 4661.
Description
Sartorius Certomat BS-1 Double Stack Shaking Incubator
This item was removed from a university laboratory where it was surplus to requirements.
Both incubator units are in good used cosmetic condition and power on, but each has functional issues:
- Top Unit: Heats up as expected but does not shake.
- Bottom Unit: Powers up but displays an error message in German on startup and continuously loops the startup sequence.
Efforts to troubleshoot both units were unsuccessful, and therefore are sold as Spares/Repair.
Item Details
| Property | Value | Tested value |
|---|---|---|
| Electrical Supply | N/A | 1-Phase |
| Plug Included? (1-Phase) | N/A | Yes - Standard UK 3-Pin Mains Plug (BS 1363) |
| PAT Test Result | N/A | Pass |
| PAT Test Date | N/A | 11-11-2024 |
| Voltage | N/A | 240V |
| Year of Manufacture | N/A | 2006 |
| Part / Catalogue Number | 8865221 | |
| Last Service Date | N/A | N/A |
| Type | Floorstanding | |
| Refrigeration | Yes | |
| Minimum Temperature (ºC) | -10 Below Ambient | |
| Maximum Temperature | 70 | |
| CO2 Sensor Type | No CO2 Sensor | |
| Heating Method | Heated Air Blower | |
| With Hot Air Sterilisation | No | |
| Humidifier | N/A | |
| With UV Lamp | No | No |
| Shaker Plate Throw | N/A | 25mm |
| General Quality Checks | ||
| Lock Fitted | N/A | Yes |
| Keys Included | N/A | No |
| Configuration | N/A | Double Stack |
| Physical Specifications | ||
| Interior Volume (L) | 280 | |
Delivery
Free shipping is not available on this product. This item will be shipped by pallet delivery. Please contact us for a domestic or overseas shipping quote.
Additional terms and conditions
These items are for spares/repair only, may be defective/unsafe, and are not intended for use.
Incubators may be transported via a range of delivery methods, including palletised courier networks or direct delivery to the intended location of use. During transit, internal sensors, fans, or control systems may be affected by vibration or movement.
To ensure optimal performance and accurate environmental conditions, it is essential that all incubators are allowed to stabilise upon arrival and are professionally calibrated before first use. Calibration ensures the unit reaches and maintains the desired temperature, humidity, or CO₂ levels reliably.
Please ensure:
- The unit is left for a minimum of 12 hours upright and unpowered after delivery.
- Calibration is completed in accordance with manufacturer specifications before any use.
Failure to calibrate prior to use may result in inaccurate conditions and affect experimental integrity or compliance with laboratory standards.
Return policy
Buy with confidence. If you wish to return the item, for whatever reason, you may do so within 45 days subject to our terms and conditions. International buyers will have to pay return shipping.
NOTE: No cables, remotes, accessories, power supplies, consumables or any other items are included unless shown in the item photos or detailed above.