Our Incubators and Growth Chambers category provides a selection of high-quality, second-hand equipment designed for precise temperature, humidity, and environmental control in laboratory and research applications. Specializing in incubators and growth chambers for cell culture, microbiology, and plant studies, our range is ideal for laboratories and research facilities.


Equipment undergoes varying levels of testing, including temperature and CO2 performance assessments, ensuring reliable and consistent environmental conditions for your experimental needs.

Items 101 to 150 of 157

Image of Gallenkamp Shaking Incubator Cat no. IOX400.XX2.C Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Gallenkamp Shaking Incubator Cat no. IOX400.XX2.C Lab

ITEM-39183

This Gallenkamp Shaking Incubator, Cat no. IOX400.XX2. Cr was removed from a university lab where it was surplus to requirements.


The device starts up with the shaking component functioning properly, however, the heating component is not operational. Therefore, it is listed as Spares or Repairs.


It is in reasonably good cosmetic condition with minor marks.

Image of VWR Incu-Line Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

VWR Incu-Line Incubator Lab Spares/Repairs

ITEM-39196

This VWR Incu-Line Incubator was removed from a university lab where it was surplus to requirements.


The unit powers up and works, but the door mechanism is broken, and the door will not remain closed.


It is sold for spares/repairs.



Image of Sanyo C02 Incubator Model MC0-175 Lab

£ 500.00 (ex. VAT) 1 in stock

Sanyo C02 Incubator Model MC0-175 Lab

ITEM-37592

Sanyo C02 Incubator MC0175


This item was removed from a university where it was surplus to requirement.


The unit powers up and is in good working order (thermometer & co2 analyser not included).


It is in reasonably good cosmetic condition, however there is some rust visible and the control cover hinge has broken.


The door seal and latch are both in good cosmetic condition.


This item includes 4  x Shelves and a Humidity Pan.

Image of Sanyo MCO-175 CO2 Incubator Lab

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-175 CO2 Incubator Lab

ITEM-35162

Sanyo MCO-175 CO2 Incubator Lab


This item was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition and has been recertified. The CO2 and Heating features are working well.


This item is fixed with castors.

Image of Sanyo MIR-554 Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-554 Incubator Lab Spares/Repairs

ITEM-36213

This was removed from a university lab where it was surplus to requirements.


The unit does not power up.


It is sold for spares/repairs

Image of LEEC Compact Incubator Model K2N Lab

£ 500.00 (ex. VAT) 1 in stock

LEEC Compact Incubator Model K2N Lab

ITEM-41676

LEEC Compact Incubator Model-K2N Lab


This item was removed from a university where it was surplus to requirement.


The unit powers up and is in good working order (thermometer not included).


It is in reasonably good cosmetic condition internally and externally.

Image of Nuaire Model NU-5510E Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire Model NU-5510E Incubator Lab Spares/Repairs

ITEM-46173

Nuaire NU-5510E Incubator Lab


This item was removed from a university where it was surplus to requirement.


The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.


Therefore, it is listed as Spares/Repair.

Image of Nuaire NU-5510E Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5510E Incubator Lab Spares/Repairs

ITEM-46172

Nuaire NU-5510E Incubator Lab


This item was removed from a university where it was surplus to requirement.


The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.


Therefore, it is listed as Spares/Repair.

Image of LMS 400NP Cooled Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LMS 400NP Cooled Incubator Lab Spares/Repairs

ITEM-42191

LMS 400NP Cooled Incubator


This item was removed from a university where it was surplus to requirement.


The incubator is in excellent cosmetic condition and powers on.

However, the compressor did not start up during testing, so the unit is unable to reach its minimum temperature of -10°C.


Therefore, it is listed as Spares/Repair.


Specifications:


  • Serial No.: 12425/17PP
  • Capacity: 450 litres
  • Internal dimensions: 64 x 55 x 118 cm (l x w x h)
  • Temperature range: -10°C to 50°C
  • 4 height adjustable shelves (56 x 60 cm)
  • Factory set auto defrost system

Image of Wheaton 753680-2 Reach In Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Wheaton 753680-2 Reach In Incubator Lab Spares/Repairs

ITEM-39203

Wheaton 753680-2 Reach In Incubator


This was removed from a university lab where it was surplus to requirements.


The unit powers up but would not heat up further than 35˚C. It is sold for spares/repairs.

Image of VWR 1927 Reach-In Dry C02 Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

VWR 1927 Reach-In Dry C02 Incubator Lab Spares/Repairs

ITEM-39202

VWR 1927 Reach-In Dry C02 Incubator


This was removed from a university lab where it was surplus to requirement.


The unit initially powered up and worked to 35˚C only, but now will not power up due to a faulty switch.


The top panel is missing.


It is sold for spares/repairs



Image of Binder CB 160 CO2 Laborator Incubator Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CB 160 CO2 Laborator Incubator Lab

ITEM-39007

Binder ED23 Drying And Heating Laboratory Oven


This was removed from a university lab where it was surplus to requirements.


The item powers on but the displays "error" after a short whilethat prevents the item from being tested.


It is in very good cosmetic condition.


It is sold for spares/repairs.

Image of Sanyo MIR-153 Refrigerated Laboratory Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-153 Refrigerated Laboratory Incubator Lab Spares/Repairs

ITEM-39069

Sanyo MIR-153 Cooling Laboratory Incubator Lab


This item was removed from a university lab where it was surplus to requirements.


It is in reasonably poor cosmetic condition with noticeable damage.


Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

Image of Nuaire NU-5800E C02 Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5800E C02 Incubator Lab Spares/Repairs

ITEM-39096

Nuaire 5800E C02 Incubator Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on. (Thermometer not included)


The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

Image of Nuaire NU-5810E CO2 Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5810E CO2 Incubator Lab Spares/Repairs

ITEM-39095

Nuaire 5810E CO2 Incubator Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on. (Thermometer not included)


The CO2 did not increase on testing, and the sample pump failed, therefore it is listed as Spares/Repair.

Image of Infors AG HT Ecotron Shaking Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Infors AG HT Ecotron Shaking Incubator Lab Spares/Repairs

ITEM-39829

Infors AG HT Ecotron Shaking Incubator


This item was removed from a university laboratory where it was surplus to requirements.


The incubator is in reasonably good cosmetic condition, both internally and externally.


It powers on successfully, with display screens, buttons, and interior lights in working order. While the shaker motor can be heard, there is no movement from the platform, which may indicate a broken or slipped belt.


The temperature functionality is in good working order (thermometer not included).


Specifications:

  • Platform Dimensions (W×D): 42×42 cm
  • Model: HT Ecotron
  • Serial No.: 109025

Image of LEEC Touch 50 Culture Safe CO2 Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LEEC Touch 50 Culture Safe CO2 Incubator Lab Spares/Repairs

ITEM-38889

LEEC Touch 50 Culture Safe CO2 Incubator


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on. (Thermometer not included)


The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

Image of Sanyo MCO-18AIC CO2 Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 Incubator Lab Spares/Repairs

ITEM-39999


Sanyo MCO-18AIC CO2 Incubator


This was removed from a university lab where it was surplus to requirements.


It is in good cosmetic condition and powers up, it has been tested with a digital thermometer (not included).


The current CO2 Pump failed during testing and will require a new one to be fitted.


Therefore, it is listed as Spares/Repair.


Features 3 Shelves.

Image of Binder CB 150 CO2 Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CB 150 CO2 Incubator Lab Spares/Repairs

ITEM-40989

Binder CB 150 CO2 Incubator


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition.


This item does not power on, therefore it is sold as Spares or Repairs.

Image of Binder CO2 Incubator CB 150 Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CO2 Incubator CB 150 Lab Spares/Repairs

ITEM-39061

Binder CO2 Incubator CB 150


This item was removed from a university where it was surplus to requirement.


It is in reasonably good cosmetic condition and powers on. (Thermometer not included)


This item does not have a CO2 fitting attached, therefore we are unable to test the CO2 function. The fan chamber is also noisy.


Due to this lack of testing, it is listed as Spares/Repair.

Image of Binder CO2 Laboratory Incubator Model CB 150 Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CO2 Laboratory Incubator Model CB 150 Lab Spares/Repairs

ITEM-38060

This was removed from a university lab where it was surplus to requirements


The unit powers up and works but has a faulty CO2 sensor.


It is sold for spares/repairs.

Image of Thermo Scientific Heracell 240i CO2 Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 240i CO2 Incubator Lab Spares/Repairs

ITEM-31726

Thermo Scientific Heracell 240i CO2 Incubator


This was removed from a university lab where it was surplus to requirements.


The unit has no screen and required a new CO2 sensor prior to the screen being removed.


It is sold for spares/repairs.



Image of Sanyo Stability Chamber PSC022.AHB.C

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo Stability Chamber PSC022.AHB.C

ITEM-36816

This was removed from a university lab where ti was surplus to requirements.


The unit does not power up. It is sold for spares/repairs.

Image of Sanyo CO2 Incubator MCO-17AIC Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator MCO-17AIC Lab Spares/Repairs

ITEM-39947

Sanyo CO2 Incubator MCO-17AIC


This was removed from a university lab where it was surplus to requirements.


The unit powers up but has an issue with CO2 leaking.


It is sold for spares/repairs.

Image of Lot Of 7 x Rotisserie Bottle/Tube Holders For Incubator Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Lot Of 7 x Rotisserie Bottle/Tube Holders For Incubator Lab

ITEM-41459

Lot Of 7 x Rotisserie Bottle/Tube Holders For Incubator


All items are in good cosmetic condition with minimal wear


This job lot of items comes from a university lab, The items were no longer required.


None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.


None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.


They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.


The units have not been tested at all.

Image of Sanyo Incubator Model-MIR162 Lab

£ 500.00 (ex. VAT) 1 in stock

Sanyo Incubator Model-MIR162 Lab

ITEM-46408

Sanyo Incubator Model-MIR162 Lab


This item was removed from a university where it was surplus to requirement.


The unit powers up and is in good working order.


It is in good cosmetic condition.

Image of Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator Lab Faulty

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator Lab Faulty

ITEM-39911

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator


This was removed from a university lab where it was surplus to requirements.


The system is faulty and requires a new controller.


It is in otherwise good cosmetic condition with minor marks.


It is sold for spares/repairs.

Image of Lab Companion IS-971R Shaking Incubator Lab Cooling Fault

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Lab Companion IS-971R Shaking Incubator Lab Cooling Fault

ITEM-39716

Lab Companion IS-971R Shaking Incubator


This was removed from a university lab where it was surplus to requirements.


The unit powers up but has a cooling fault. It is seemingly in otherwise working condition.


It is in good cosmetic condition with minor marks


It is sold for spares/repairs.

Image of Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC Lab Spares/Repairs

ITEM-36845

This Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC was removed from a university lab where it was surplus to requirements.


The unit powers up but shows the following error.


M26 - LAMP COOLING BLOWER FAILURE.

The manual states:


1. The blower is bad.

2. The blower relay is bad.

3. The airflow switch is bad.


We have been advised that the system is missing some essential parts. These parts are available from the manufacturer.


It is in otherwise good cosmetic condition with minor marks.


It is sold for spares/repairs due to the error.

Image of Medline Scientific Incubated Shaker Model - IS-971RF Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Medline Scientific Incubated Shaker Model - IS-971RF Spares/Repairs

ITEM-20411

This Medline Scientific Incubated Shaker Model - IS-971RF was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included). It was set to 37˚C but only reached 31˚C. The display would keep reverting to 22.2˚C as well. There was a note from the lab stating that it had some heating issues.


Inside dimensions - L89.5 x W63 x D48cm

Platform size - 46 x 76cm


The shaker speed ran up to 160rpm. We tried setting it to the max of 300 but it wouldn't run at that.


Cosmetically it is in a reasonable used condition but all the light tubes work bar one.


It is sold for spares/repairs due to the fault.

Image of SLS Lab Pro INC8017 Incubator Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

SLS Lab Pro INC8017 Incubator Spares/Repair Lab

ITEM-46085

SLS Lab Pro INC8017 Incubator Lab


This item was removed from a university lab where it was surplus to requirement.


The incubator powers on but is in poor cosmetic condition, and emits loud noises at higher temperatures, leading to it being turned off for safety reasons.


There are structural issues as well. The wheels are broken, and the doors are misaligned, requiring them to be manually lifted to lock properly.


Due to the issues listed above, this incubator is listed as Spares/Repair.

Image of RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 Lab Spares/Repairs

ITEM-39052

This RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 was removed from a university lab where it was surplus to requirements.


The item is in good cosmetic condition but due to the control panel being removed, we are unable to perform any test. Therefore, it is being sold as Spares or Repairs.

Image of Sanyo CO2 Incubator Model - MCO175 Lab

£ 490.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator Model - MCO175 Lab

ITEM-37591

Sanyo CO2 MCO-175 Incubator


This item was removed from a university laboratory where it was surplus to requirements.


It is in fairly good used condition, showing signs of rust around the unit. It includes four shelves and a humidifying pan, with the door catch and seal both in good condition.


The unit powers up and is in good working order (thermometer & co2 analyser not included).


Specifications.

  • Model: MCO-175
  • Serial No: 20606783

Image of Heraeus CO2 Incubator Type BB 6220 CUO2 Lab

£ 450.00 (ex. VAT) 1 in stock

Heraeus CO2 Incubator Type BB 6220 CUO2 Lab

ITEM-31143

Heraeus CO2 Incubator Type BB 6220 CUO2


This item was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition externally and fairly poor cosmetic condition internally.

It has been recertified by en engineer with heating and CO2 functions tested,.


Specifications;

  • Model: BB 6220 CUO2
  • SN: 94109551
  • Internal dimensions: D56 W65 H66cm
  • 6 Doors with 6 Shelves: 50 x 26cm

Image of Heraeus BB 16 Function Line CO2 Incubator Lab

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 450.00 (ex. VAT) 1 in stock

Heraeus BB 16 Function Line CO2 Incubator Lab

ITEM-39055

Heraeus BB 16 Function Line CO2 Incubator


This was removed from a university lab where it was surplus to requirements.


The system has been professionally serviced and is in full working order. A report is available on request.


It is in good cosmetic condition with minor marks.

Image of RS Biotech Galaxy S+ CO2 Laboratory Incubator 170-200 Plus Lab

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 435.00 (ex. VAT) 1 in stock

RS Biotech Galaxy S+ CO2 Laboratory Incubator 170-200 Plus Lab

ITEM-35168

This RS Biotech Galaxy S+ CO2 Laboratory Incubator was removed from a university lab where ti was surplus to requirements.


The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It will require calibration upon installation.


It is in good cosmetic condition with minor marks from use.


3 Shelves - 52 x 42.5cm

Image of Genlab Laboratory Incubator Model INC130CF Lab

£ 400.00 (ex. VAT) 1 in stock

Genlab Laboratory Incubator Model INC130CF Lab

ITEM-42427

Genlab Laboratory Incubator Model INC130CF


This item was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition and in good working order.



Image of Gallenkamp Size Two Incubator Model IH-150 Lab

£ 400.00 (ex. VAT) 1 in stock

Gallenkamp Size Two Incubator Model IH-150 Lab

ITEM-42423

Gallenkamp Size Two Incubator Model IH-150 Lab


This item was removed from lab where it was surplus to requirement.


It is in good cosmetic condition and in good working order.

Image of GenLab Incubator Model INC60F Lab

£ 400.00 (ex. VAT) 1 in stock

GenLab Incubator Model INC60F Lab

ITEM-46081

GenLab Incubator Model INC60F Lab


This item was removed from a university lab where it was surplus to requirement.


The unit powers up and is in good working order.


It is in good cosmetic condition.

Image of Memmert BM400 Lab Incubator Lab

£ 400.00 (ex. VAT) 1 in stock

Memmert BM400 Lab Incubator Lab

ITEM-44772

Memmert BM400 Incubator


This item was removed from a university lab where it was surplus to requirement.


The unit powers up and is in good working order.


It is in good cosmetic condition.


Specifications:

  • Model: BM400
  • Serial#: 891076

Image of Jouan EB115 EL TS SN Incubator Lab

£ 400.00 (ex. VAT) 1 in stock

Jouan EB115 EL TS SN Incubator Lab

ITEM-40921

Jouan EB115 EL TS SN Incubator


This was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a temperature probe (not included).


It is in good working order and cosmetic condition with minor surface damage present.

Image of Gallenkamp Economy Incubator With Fan Size 1  INA.306.010J Lab

£ 315.00 (ex. VAT) 1 in stock

Gallenkamp Economy Incubator With Fan Size 1 INA.306.010J Lab

ITEM-35871

Gallenkamp Economy Incubator With Fan Size 1  INA.306.010J Lab


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside.



Image of LMS Model 300W Cooler Incubator Lab

£ 300.00 (ex. VAT) 1 in stock

LMS Model 300W Cooler Incubator Lab

ITEM-46076

LMS Model 300W Cooler Incubator Lab


This item was removed from a university laboratory where it was surplus to requirements.


It powers on and is in working order.


The unit is in poor cosmetic condition, with rust present on the interior.

Image of LMS Cooled UnderBench Incubator Model-305 Lab

£ 300.00 (ex. VAT) 1 in stock

LMS Cooled UnderBench Incubator Model-305 Lab

ITEM-46409

LMS Cooled UnderBench Incubator Model-305 Lab


This item was removed from a university where it was surplus to requirement.


The unit powers up and is in good working order.


It is in reasonably good cosmetic condition.

Image of 2 x Roller Incubator Shelves For Wheaton 753684-D Incubator

£ 250.00 (ex. VAT) 1 in stock

2 x Roller Incubator Shelves For Wheaton 753684-D Incubator

ITEM-46152

2 x Roller Incubator Shelves For Wheaton 753684-D Incubator


These items were removed from a university lab where they were surplus to requirement.


Both shelves are in good cosmetic condition.


Image of Laboratory Thermal Equipment Incubator (Cream) Copper Lab

£ 200.00 (ex. VAT) 1 in stock

Laboratory Thermal Equipment Incubator (Cream) Copper Lab

ITEM-46074

Laboratory Thermal Equipment Incubator (Cream) Copper Lab


This item was removed from a university lab where it was surplus to requirement.


It powers on and is in working order.


It is in reasonably poor cosmetic condition.


Features a copper interior.

Image of New Brunswick Scientific Co G-25 Shaking Incubator Lab

£ POA 1 in stock

New Brunswick Scientific Co G-25 Shaking Incubator Lab

ITEM-42975

This item is new in stock. Please enquire for further details.

Image of Forma Scientific CO2 Water Jacketed Incubator Model-3131

£ POA 1 in stock

Forma Scientific CO2 Water Jacketed Incubator Model-3131

ITEM-46897

This item is new in stock. Please enquire for further details.

Image of Scanbur Warming Cabinet Type-48-VS-III Lab

£ POA 1 in stock

Scanbur Warming Cabinet Type-48-VS-III Lab

ITEM-44883

This item is new in stock. Please enquire for further details.

Image of Binder CB 210 CO2 Incubator

£ POA 1 in stock

Binder CB 210 CO2 Incubator

ITEM-32052

This item is new in stock. Please enquire for further details.

Items 101 to 150 of 157

Filters

Price (£)

to

Condition