Safety Cabinets and other Workstations
Items 51 to 76 of 76

£ 1,000.00 (ex. VAT) 1 in stock
DW Scientific MACS VA500 Microaerophilic Workstation Lab
ITEM-36542
DW Scientific MACS VA500 Microaerophilic Workstation Lab
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. It was tested with a digital thermometer (not included).
It is in reasonable cosmetic condition, with marks from use.

£ 1,000.00 (ex. VAT) 1 in stock
BioMat 2 Class ll Microbiological Safety Cabinet On Stand With Ducted Exhaust
ITEM-42261
BioMat 2 Class II Microbiological Safety Cabinet with Ducted Exhaust on Stand
This item was removed from a university where it was surplus to requirements.
The cabinet is in good cosmetic condition and includes a steel stand measuring 113 x 60 x 83 cm (w x d x h).
The unit powers up and is in good working order. A strong airflow was observed, and the inflow needle indicator reached the green safe zone during operation. Interior power sockets were tested and are functional. (Socket tester not included.)
It's been regularly serviced, with its most recent being on: 22.04.24
Specifications:
- Serial No.: MC5765/1
- Exhaust outlet: 20 cm diameter duct connection
- Formalin vaporiser external tank
Notes:
- The fan control button is missing its outer diaphragm, but is operational.
- No UV function included.

£ 1,000.00 (ex. VAT) 1 in stock
Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E Series 6 Lab
ITEM-28195
This Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E Series 6 was removed from a university lab where it was surplus to requirements.
The item powers on with blowers and both Light & UV working.
The blower will only work when the sash is at the correct working height. This is marked on the side of the unit. When it is dropped fully the blower switches off as it should. When it is raised above the mark the windows alarm goes off as it should, until the sash is dropped back to the correct working height.
The unit starts up as it should and shows 'low' airflow initially until it builds up to the correct flow. It then raises above the correct flow and the 'HI' alarm sounds. We spoke to a service engineer and they suggested that it will just require calibrating upon installation. It will need commissioning upon installation anyway.
The lab reported that the filter has been removed.
Inside dimensions - D57.5 W118 H72cm

£ 990.00 (ex. VAT) 1 in stock
C.B.S Scientific Optimizer PCR Workstation Lab
ITEM-36000
C.B.S Scientific Optimizer PCR Workstation
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition with minor marks.
Includes:
-GE fluorescent light
-GE Germicidal lamp

£ 960.00 (ex. VAT) 1 in stock
BIGNEAT F3-XIT BPXS03/01A Safety Cabinet Powder Weighing Station Lab
ITEM-34875
BIGNEAT F3-XIT BPXS03/01A Safety Cabinet Powder Weighing Station
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order. It is in good cosmetic condition with marks from use.

£ 925.00 (ex. VAT) 1 in stock
Labcaire Model - BH12 Class II Biological Safety Cabinet Lab
ITEM-25327
This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab where it was surplus to requirements. It was last used 3 years ago and the lab were confident it was working.
The unit powers up and both the fans and the white lights are working. There is no UV light fitted.
It is in reasonably good cosmetic condition but the metal cover for the bottom is missing its latches and won't quite fit.
Inside dimensions - D62.5 W120 H70cm
Hours - 14001.4

£ 900.00 (ex. VAT) 1 in stock
Labcaire Model - BH12 Class II Biological Safety Cabinet
ITEM-41421
This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab where it was surplus to requirements.
The unit powers up, and both the fans and the white lights are functioning. There is no UV light installed, and the socket tester is not included.
It is in reasonably good cosmetic condition internally and externally.
Inside dimensions - D63 W120 H70cm
Hours - 1078 1.2

£ 835.00 (ex. VAT) 1 in stock
Labcaire Special Downflow Laboratory Workstation Bench Lab
ITEM-32031
This Labcaire Special Downflow Laboratory Workstation Bench was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order.
It is in good cosmetic condition, with minor marks from use.
Workstation Surface - 100 x 75cm
2 x Internal filters
Labcaire.
Filter Type: AC
Part No: LA7204

£ 800.00 (ex. VAT) 1 in stock
Lab Companion UVC-01 UV Cabinet
ITEM-39097
Lab Companion UVC-01 UV Cabinet
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition with minor marks

£ 800.00 (ex. VAT) 1 in stock
Air Science Purair P5-24-XT Ductless Fume Hood Lab
ITEM-46708
Air Science Purair P5-24-XT Ductless Fume Hood Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
Includes:
- 1 x Key.

£ 700.00 (ex. VAT) 1 in stock
Envair Bio 2+ Class 2 Biological Safety Cabinet Lab
ITEM-46744
Envair Bio 2+ Class 2 Biological Safety Cabinet Lab
This item was removed from a university lab where it was surplus to requirement.
It is in reasonably good cosmetic condition, with some surface wear, and is in good working order.

£ 650.00 (ex. VAT) 1 in stock
UVP UV2 Sterilizing PCR Workstation Lab
ITEM-46147
UVP UV2 Sterilizing PCR Workstation
This item was removed from a university laboratory where it was surplus to requirements.
It powers on, and is in good working order. The plexiglass shows significant wear from extensive use, resulting in poor cosmetic condition, though the rest of the unit remains in fair cosmetic condition.
Socket tester in photos not included.

£ 505.00 (ex. VAT) 1 in stock
MAT Medical BioMAT 2 Class 2 Recirculating Microbiological Safety Cabinet Lab
ITEM-31181
MAT Medical Air Technology BioMAT 2 Class 2 Microbiological Safety Cabinet
This was removed from a university lab where it was surplus to requirements.
The item powers on with airflow and UV light working, the white light doesn't work, but it may just be the bulb.
It is in good cosmetic condition with some marks from use.
Cabinet Dimensions - L120 W63 141cm
Frame Dimensions - L112 W60 H84cm
Internal workspace dimensions - D54 W106 H70cm

£ 500.00 (ex. VAT) 1 in stock
Envair Bio 2+ Plus Class 2 Microbiological Safety Cabinet Lab
ITEM-31185
This Envair Bio 2 Class 2 Microbiological Safety Cabinet was removed from a laboratory where it was surplus to requirements.
The unit powers up and the airflow and light is working. The UV is not working.
Cabinet dimensions - D70 W125 H139cm
Frame dimensions - D61 W122 H83cm
Internal workspace dimensions - D56 W106 H71cm
The item is in a reasonable, used cosmetic condition.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
VAC HE-63-P PEDATROL GloveBox Lab Spares/Repairs
ITEM-41335
VAC HE-63-P PEDATROL GloveBox Lab
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition.
The item is missing its back panel, which prevents us from conducting tests due to exposed wires, therefore, it is sold as Spares/Repairs.
Also includes the following:
- Components for the machine
- Tubing
- Pipes
- Automatic Dewpoint Meter

£ 500.00 (ex. VAT) 2 in stock
Lab-Bubble Still Air PCR Enclosure - Blue
ITEM-39749
Lab-Bubble Still Air PCR Enclosure - Blue
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Don Whitely MK3 Anaerobic Bench Top Work Station Spares/Repair
ITEM-42468
Don Whitely MK3 Anaerobic Bench Top Work Station
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition but is not in working order, mainly due to a faulty gas inlet valve.
It powers on with functional temperature control and cooling fans. Key issues include non-working internal power sockets, flashing low CO2 and N2 warning lights, and a broken outer door lock seal knob, which compromises the chamber's sealing.
Due to the faults listed above, this system is listed as Spares/Repair.
Features:
- Uses hydrogen, nitrogen, and carbon dioxide or a standard anaerobic gas mixture.
- Digital temperature controller for constant temperature maintenance.
- Humidistat-controlled condensing plate for excess moisture removal.
- 30-litre interchange lock capable of holding 108 plates with vacuum flushing.
Includes:
- User Instruction Manual
Serial No.: 3170S

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Esco NordicSafe NC2 - 4L8 Class 2 Safety Cabinet - Damaged Base Lab
ITEM-39859
Esco NordicSafe NC2 - 4L8 Class 2 Safety Cabinet
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition, but is listed as Spares/Repair due to damage to the base of the cabinet.
Model: NordicSafe NC2 - 4L8
Serial: NC2-4L8-2013-80689

£ 500.00 (ex. VAT) 1 in stock
MAT BioMAT 2 Recirculating Class 2 Microbiological Safety Cabinet
ITEM-31182
MAT Medical Air Technology BioMAT 2 Class 2 Microbiological Safety Cabinet
This was removed from a university lab where it was surplus to requirements.
The item powers on with airflow and UV light working, the white light doesn't work, but it may just be the bulb.
It is in good cosmetic condition with some marks from use.
Cabinet Dimensions - L120 W63 141cm
Frame Dimensions - L112 W60 H84cm
Internal workspace dimensions - D54 W106 H70cm

£ 480.00 (ex. VAT) 2 in stock
Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT
ITEM-39710
Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition with minor marks

£ 480.00 (ex. VAT) 3 in stock
Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED
ITEM-39746
Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good cosmetic condition with minor marks.
Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

£ 480.00 (ex. VAT) 1 in stock
Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK
ITEM-39744
Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

£ POA 1 in stock
Envair Bio 2+ Class 2 Microbiological Safety Cabinet Lab
ITEM-41393
This item is new in stock. Please enquire for further details.

£ 295.00 (ex. VAT) 1 in stock
Protex Model/Type - VB FH Ventilated Workstation Lab
ITEM-31713
Protex Ventilated Workstation Model/Type - VB FH
This was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good cosmetic condition with minor marks from use.
It has not been tested as it needs a power cable wired up.
Workstation surface - 140 x 70cm
Cabinet dimensions L95 W55 H54
Internal - D49.5 W94 H53

£ POA 1 in stock
Monmouth Guardian MSC Model T800 Fume Cabinets With Frame Lab
ITEM-46082
This item is new in stock. Please enquire for further details.

£ POA 1 in stock
Air Science Purair P10 Clean Ductless Fume Hood Lab
ITEM-46928
This item is new in stock. Please enquire for further details.
Items 51 to 76 of 76