General Laboratory

SPARES/REPAIR ITEM

£ 800.00 (ex. VAT) 1 in stock

Thermo Scientific Sorvall Discovery M120 SE Centrifuge Spares/Repairs

ITEM-35813

This was removed from a university lab where it was surplus to requirements

THe unit powers up but shows error 48 which is a door lock error. It seems like the door solenoid is not being sent a signal.

It is sold for spares/repairs.

No rotor included.

£ 800.00 (ex. VAT) 1 in stock

Nuaire Laboratory CO2 Incubator Model NU-5500E Lab

ITEM-46363

Nuaire Laboratory Incubator Model NU-5500E Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

SPARES/REPAIR ITEM

£ 800.00 (ex. VAT) 1 in stock

Julabo Recirculating Chiller Model: FLW1703GB Lab Spares/Repairs

ITEM-20313

This Julabo FL 1703 Recirculating Chiller Model: FL1703GB was removed from a university lab where it was surplus to requirements.

The item is in reasonable cosmetic condition. It has scratches and stains along its surface.

The unit powers up but requires a replacement compressor.

It is in good cosmetic condition with minor marks.

It is sold for spares/repairs.

$Image of Oxford Cryo Systems Crystal Diffractometer Cryostream Probe Lab$

£ 800.00 (ex. VAT) 1 in stock

Oxford Cryo Systems Crystal Diffractometer Cryostream Probe Lab

ITEM-46195

Oxford Cry Systems Crystal Diffractometer Cryostream Probe

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It was not possible to test the functionality at our facility.

Includes:

Single crystal diffractometer cryostream probe

SPARES/REPAIR ITEM

£ 800.00 (ex. VAT) 1 in stock

Infors AEROTRON Shaker Incubator Lab Spares/Repairs

ITEM-39841

Infors AEROTRON Shaker Incubator

This was removed from a university lab where it was surplus to requirements.

The unit does not power up. It is sold for spares/repairs.

We think this unit would make for a great movie prop.

£ 800.00 (ex. VAT) 1 in stock

Beckman GS-6KR Centrifuge with PTS-2000 Rotor Lab

ITEM-37244

Beckman GS-6KR Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order.

During tested, the item reached a maximum temperature of 32ºc, but successfully chilled to a minimum of -10ºc. It was tested at the rotors top speed of: 3250 RPM.

Includes:-

Beckman PTS-2000 Swinging Bucket Rotor Centrifuge
4 x Buckets, the cover for one of the baskets is not included.

£ 800.00 (ex. VAT) 1 in stock

Beckman Coulter Centrifuge Rotor Type 50.2 Ti Lab

ITEM-41839

Beckman Coulter Rotor Type 50.2 Ti

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

Features:

Type - 50.2 Ti
Max RPM - 50,000
The Unit Has 12 x Slots For Vials
Only Use in Instruments Classified H, R, S

£ 800.00 (ex. VAT) 1 in stock

Beckman J-6B Refrigerated Ultracentrifuge w/ JS4.2 rotor & 6 x Buckets Lab

ITEM-47408

Beckman J-6B Refrigerated Ultracentrifuge with JS4.2 Rotor & 6 x Buckets

This item was removed from a university where it was surplus to requirements.

It is in good working order and in reasonably good cosmetic condition, with typical signs of age and use.

During testing, the unit achieved its maximum rated speed of 4200 rpm and was successfully temperature tested.

Includes:

JS4.2 rotor
6 x buckets
Various Beckman bucket adapters

£ 760.00 (ex. VAT) 1 in stock

Heraeus Labofuge 400 Function Line Benchtop Centrifuge 3500rpm Max Lab

ITEM-36950

Heraeus Labofuge 400 Function Line Benchtop Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs smoothly up to 3500rpm.

It is in reasonable cosmetic condition with light marks and rusting.

Heraeus Rotor #8179

4 x Buckets #8172 Ch.003515

£ 750.00 (ex. VAT) 1 in stock

Sorvall RT7 Plus Refrigerated Benchtop Centrifuge w/ RTH-250 Rotor Lab

ITEM-46642

Sorvall RT7 Plus Refrigerated Benchtop Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition

Included:

1 x Sorvall RTH-250 Rotor

Maximum Speed: 3200 rpm
Rotor Mass:7 kg
Capacity:250 mL
Tube Dimensions: 61 x 124 mm or 45 x 135 mm

4 x Buckets PN 11053

2 x Adaptors (00438) Holds 4 x 50ml tubes

2 x Adaptors (00884) Holds 10 x 15ml tubes

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-17AI CO2 Incubator Lab

ITEM-44771

Sanyo MCO-17AI CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

Specifications;

Model: MCO-17AI
Serial#: 90100724

£ 750.00 (ex. VAT) 1 in stock

Eppendorf 5402 Refrigerated Centrifuge w/ Eppendorf F-45-18-11 Rotor Lab

ITEM-46193

Eppendorf 5402 Refrigerated Bench-top Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good working order, however the display screen backlight is slightly dim.

Includes;

Eppendorf F-45-18-11 fixed angle rotor
Capacity: 18 x 1.5/2.0mL

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Sorvall RC-5C+ Plus Floorstanding Centrifuge Lab Spares/Repairs

ITEM-41038

This Sorvall RC-5C Plus Floor-Standing Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up, but shortly after running it produces error code 7 preventing it from being tested, therefore this item is sold as Spares or Repairs.

Error 7 = REFRIGERATION SYSTEM FAILURE There was no apparent drop in chamber temperature thirty seconds after the refrigeration system started to cool. Notify your Thermo Field Service Engineer.

£ 750.00 (ex. VAT) 1 in stock

Eppendorf Model A-2-DWP Rotor 3,700 rpm 2 x Buckets Lab

ITEM-46921

Eppendorf A-2-DWP Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It was unable to be tested further.

Includes:

2 x Swinging Buckets

Specifications:

Maximum speed: 3,700 rpm
Maximum RCF: 2,250 × g
Capacity: Accommodates up to two deepwell plates, microtiter plates, cell culture plates, or filtration plate kits
Compatible with Eppendorf Centrifuge models 5804, 5804 R, 5810, and 5810 R

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Beckman Optima LE-80K Centrifuge Spares/Repair Lab

ITEM-46445

Beckman Optima LE-80K Centrifuge Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but encounters issues when attempting to reach set speeds; the machine beeps and displays messages about microns and speed, then slows down.

Therefore, it is listed as Spares/Repair.

£ 750.00 (ex. VAT) 1 in stock

Ealing Optical Isolation Tabletop Breadboard 149x120x25cm on Bench 156x92x72m

ITEM-42418

Ealing Optical Isolation Tabletop Breadboard on Lab Bench

This item was removed from a university laboratory where it was surplus to requirements.

The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.

It is in good cosmetic condition.

Table Specifications:

Size: 149 x 120 x 25 cm (Length x Width x Height)
Thread Size: Imperial UNF 1/4" - 28
Matrix: 2" square, featuring a grid of 29 x 23 holes

Lab Bench Specifications:

Size: 156 x 92 x 72 cm (Length x Width x Height)
Material: Tubular steel frame with a wooden tabletop

£ 750.00 (ex. VAT) 1 in stock

Ealing Optical Isolation Tabletop Breadboard 154x120x25cm on Bench 156x92x72m

ITEM-42459

Ealing Optical Isolation Tabletop Breadboard on Lab Bench

This item was removed from a university laboratory where it was surplus to requirements.

The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.

It is in good cosmetic condition.

Table Specifications:

Size: 154 x 120 x 25 cm (Length x Width x Height)
Thread Size: Imperial UNF 1/4" - 28
Matrix: 2" square, featuring a grid of 29 x 23 holes

Lab Bench Specifications:

Size: 156 x 92 x 72 cm (Length x Width x Height)
Material: Tubular steel frame with a wooden tabletop

£ 750.00 (ex. VAT) 1 in stock

Job Lot of 8 Helmsman Dispenser Red/Grey 20 Door Pigeon Hole Post Cabinets Lab

ITEM-38696

Job Lot of 8 Helmsman Dispenser Red/Grey 20 Door Cabinets

This job lot of items comes from a university lab, The items were no longer required.

Individual exterior dimensions: L45cm x W38cm x H 182cm. 35Kg.

Individual interior dimensions of each compartment: L43cm W32cm x H8cm.

Item is supplied with 1 Main door opening Key, which opens all cabinets, and an additional 113 Keys for individual cabinets.

Doors with keys have been tested & working.

£ 750.00 (ex. VAT) 1 in stock

Job Lot of 18 Electro Nickel Clifton 1026E Boiling Baths with ER1 Regulators

ITEM-37620

Job Lot of 18 Electro Nickel Clifton 1026E Boiling Baths with ER1 Regulators

These were removed form a university lab where they were surplus to requirements.

The units are all in good working order.

£ 750.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek 2000 Laboratory Automation Workstation

ITEM-35153

This Beckman Coulter Biomek 2000 Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.

The item powers on but is unable to be tested further without software.

The item is in a reasonable, used cosmetic condition with marks and scuffs.

It comes with a sealed box of Beckman P 20 Pipette Tips (20ul)

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

New Brunswick Innova 44R Refrigerated Shaking Incubator Lab Spares/Repairs

ITEM-45166

New Brunswick Innova 44R Incubator Broken Shaker Lab

This item was removed from a university lab where it was surplus to requirements.

The incubator is in reasonable good used cosmetic condition, with some rust around the edges of the lower base.

The unit powers on and was successfully temperature tested. However, it has a faulty shaker motor and stuck bolts on the shaker plate, which require significant work for repair, but is entirely possible for someone to do.

Due to the faulty shaker element, this item is listed as Spares/Repair.

Specifications:

Model: Innova 44R
Condition: Fair, requires repair for shaker motor
Functionality: Incubation temperatures tested and reached correctly

£ 750.00 (ex. VAT) 1 in stock

Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810

ITEM-37249

Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810

This item was removed from a university where it was surplus to requirement.

It is in good, used cosmetic condition.

Specifications:

Type: 2-in-1 Fixed Angle and Swinging Bucket Rotor
Max RCF: 3,114 x g (Fixed Angle), 3,490 x g (Swinging Bucket)
Radius: 116/37 mm Fixed Angle, 130/42 mm Swinging Bucket
Angle: 45° Fixed, 12 to 87° Swinging Bucket
Capacity: 8 x 15 mL (Fixed Angle), 8 x 10 mL (Swinging Bucket)
Max Speed: 300 to 4,900 rpm, adjustable in increments of 100 rpm

£ 750.00 (ex. VAT) 1 in stock

Stuart SI60 Clear Chamber Forced Air Incubator, 60 L Lab

ITEM-44775

Stuart SI60 Clear Chamber Forced Air Incubator, 60 L Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order.

Specifications:

Model: SI60
Serial#: R000100205

£ 750.00 (ex. VAT) 1 in stock

Thermo Scientific Matrix Hydra II Automated Liquid Handling System Lab

ITEM-23391

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition with marks from use. All modules power up.

We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes.

The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working.

The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal.

We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts.

The system is made up of the following;

1 x Matrix Hydra II

Cat no. 109610

1 x Matrix 2 Position Stage

1 x Apogent Discoveries Matix Hydro Pump Module

The unit powers on with all 3 Fills working.

1 x Matrix P1 Control Box

1 x Innovadyne 1-Channel Nanofill

The unit powers up.

1 x Grant Instruments Type MS1

The unit powers up.

Dell Laptop with Microsoft Mouse

Model - PP04X

Hydra II-Plus-One Control Software Version 3.1.3 Installed

The unit powers up and the software runs.

Software Discs:

Matrix Hydra II-Plus-One Control Software Version 3.1.3

Matrix Hydra II-Plus-One Control Software Version 3.1.2

SuperLogics LE Software Suite Rev 2.9

2 x Socket Installation discs

Various tubing and accessories

Operating instructions

£ 750.00 (ex. VAT) 1 in stock

Audion AudionVac Digital VMS 133 Vacuum Sealing Machine

ITEM-47135

Audion AudionVac Digital VMS 133 Vacuum Sealing Machine

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in working order.

Includes;

User Manual
3 x Marble Platform

£ 750.00 (ex. VAT) 1 in stock

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge with 6000rpm Rotor Lab

ITEM-40061

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs well to 6000rpm. It also cools and incubates as it should.

It is in good cosmetic condition with minor marks.

It is supplied with;

MSE Rotor 43124-141

SN - 7962

Max RPM - 6000

4 x Buckets

4 x Beige Adaptors hold 1 x 50ml tube each

£ 745.00 (ex. VAT) 1 in stock

Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator Lab

ITEM-29757

This Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. It will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item has 4 shelves.

Internal dimensions are L49cm x W48cm x H66cm.

£ 745.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator Lab

ITEM-29766

This Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator was removed from a university lab where ti was surplus to requirements.

The unit powers up and is in good working order but will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item is supplied with 4 shelves.

Internal dimensions are L45cm x W45cm x H66cm.

£ 740.00 (ex. VAT) 1 in stock

Sorvall Dupont Super-Lite GS-3 Model SLA-3000 Fixed Angle Rotor With Lid

ITEM-37954

This Sorvall Dupont Super-Lite GS-3 Model SLA-3000 Fixed Angle Rotor With Lid was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used.

1200 rpm max

6 x position 500ml capacity

Compatible with Thermo Scientific Sorvall Evolution RC Series and RC-6 Series centrifuges including RC-5, RC-5B, RC-5B Plus, RC-5C Plus, and RC-26

RECERTIFIED ITEM

£ 730.00 (ex. VAT) 1 in stock

Durafuge 100 Precision Centrifuge Cat no. 51231201 with SO-1X Rotor Lab

ITEM-26173

Durafuge 100 Precision Centrifuge Cat no. 51231201 with SO-1X Rotor

This was removed from a university lab where it was surplus to requirements.

It has been tested by a service engineer and is in full working order. It is in very good cosmetic condition with only minor marks from use. A brand new gas strut was fitted by the engineer.

Rotor - Precision SO-1X

Cat no. 51231203

4 x Swinging buckets - SO-1X

Cat no. 51231221

SN - 1302/01

4 x Adaptors to fit 15ml tubes

Cat no. 51231208

£ 730.00 (ex. VAT) 1 in stock

Bright Model M3500 Rotary Microtome Lab

ITEM-29829

This Bright Model M3500 Rotary Microtome was removed from a university lab where it was surplus to requirements.

The unit powers up with 2 x AA batteries (not included) and is in good working order mechanically, but has not been tested on samples.

It is in very good cosmetic condition with only minor marks from use.

£ 725.00 (ex. VAT) 1 in stock

LEC LSFSF312BT Medical Laboratory Freezer - Lab

ITEM-47087

LEC LSFSF312BT Medical Laboratory Freezer - Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 725.00 (ex. VAT) 1 in stock

Reichert-Jung Ultracut E Microtome 70 17 74 Lab

ITEM-35673

Leica Reichert Ultracut E Microtome

This was removed from a university lab where it was surplus to requirements.

The unit was tested with a controller from another unit (not included), but was found to power up and operate correctly.

It is in good cosmetic condition with minor marks

Head - Reichert Stereo Star Zoom

0.7X to 3.0X 569

2 x Eye pieces - 15X W.F 184

£ 720.00 (ex. VAT) 1 in stock

LEC Medical LSFSF312BT Laboratory Freezer - Lab

ITEM-47086

LEC Medical LSFSF312BT Laboratory Freezer - Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 715.00 (ex. VAT) 1 in stock

LEC Medical Model: LSFSF312BT Laboratory Freezer Lab

ITEM-46984

LEC Medical Model: LSFSF312BT Laboratory Freezer Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 715.00 (ex. VAT) 1 in stock

LTE Scientific IP100-U Laboratory Incubator Lab

ITEM-36518

LTE Scientific IP100-U Laboratory Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in reasonably good cosmetic condition with minor marks. (Digital thermometer not included).

£ 710.00 (ex. VAT) 1 in stock

LEC Medical LSFSF312BT Laboratory Freezer Lab

ITEM-46983

LEC Medical LSFSF312BT Laboratory Freezer Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Please note: this item is missing a drawer.

£ 710.00 (ex. VAT) 1 in stock

Torrey Pines Scientific Inc Echotherm Chilling/heating Plate IC22-2

ITEM-38440

Torrey Pines Scientific Inc Echotherm Heating/Chilling Plate IC22-2

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order. It was tested with a digital thermometer (not included).

It is in good cosmetic condition.

£ 705.00 (ex. VAT) 1 in stock

LEC LSFSF312BT Laboratory Medical Freezer

ITEM-46982

LEC Medical LSFSF312BT Laboratory Freezer

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 700.00 (ex. VAT) 1 in stock

LEC Model Medical LSFSF312BT Laboratory Freezer

ITEM-46981

LEC Model Medical LSFSF312BT Laboratory Freezer

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and in working order.

£ 700.00 (ex. VAT) 1 in stock

BECKMAN Model J2-21 Floor Standing Centrifuge Lab

ITEM-21249

This BECKMAN Model J2-21 Floor Standing Centrifuge was removed from a university lab where it was surplus to requirements.

The unit is in full working order but is not supplied with a rotor.

It is in reasonably good cosmetic condition but has cracks on the door hinge and latch.

£ 700.00 (ex. VAT) 1 in stock

Millipore Elix 5 Water Purification System + 60L Tank Lab

ITEM-46763

Millipore Elix 5 Water Purification System + 60L Tank Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition with signs of age and powers on, we are unable to test it further at our facility.

Please not; the included filter has expired, therefore it will require a replacement before use.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova U725 -86 G Ultra Low Temperature Freezer Lab

ITEM-40064

New Brunswick Scientific Innova U725-G Ultra Low-Temperature Freezer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on but shows power fail after 5 mins and will not run, therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Rigaku X-Stream 2000 Cryogenic Crystal Cooler System CP830, XS-2000 Lab

ITEM-42071

Rigaku X-Stream 2000 Cryogenic Crystal Cooler System

This system was removed from a university lab where it was surplus to requirements.

The Rigaku X-Stream 2000 main unit did not power on when tested with a 3 Phase test plug. It is in good cosmetic condition with minimal wear.

The cryogenic crystal cooler powers on and is in good condition with minimal wear. It has passed a PAT test, but no further testing was performed.

Due to the main unit not powering on, this system is listed as Spares/Repair.

Specifications:

Main Unit
Model: CP830
Serial No.: 1831322-240105A
Cryogenic Crystal Cooler
Model: XS-2000
Serial No.: 800150

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Carl Padberg Zentrifugenbau Filter Centrifuge LE Lab Spares/Repairs

ITEM-36357

This Carl Padberg Zentrifugenbau LE was removed from a university lab where it was surplus to requirements.

The cosmetic condition of this item is fairly good and it has powered on.

We set the unit to 20,000rpm. It does ramp up quite slowly to speed. It reached 21,000+ and started to hold speed.

We're not sure how accurate the speed adjustment is. It didn't seem to fully hold at 20,000rpm, it kept slowly rising. The belt looks like it needs replacing too.

For this reason, It is sold for spare/repairs

The speed range is from 15000 to 40000 rpm.

Additionally included:

1x New Brunswick Scientific power supply switching/speed selection unit

1x Huber and Moser motor

£ 700.00 (ex. VAT) 1 in stock

Large Safety Cabinet/Cupboard fitted with Gas Regulators Lab

ITEM-39050

Large Safety Cabinet/Cupboard fitted with Gas Regulators

This was removed from a university lab where it was surplus to requirements.

The unit is untested but in reasonably good cosmetic condition.

£ 700.00 (ex. VAT) 1 in stock

Sartorius EB35EDE-IX Industrial Laboratory Scales Lab

ITEM-44655

Sartorius EB35EDE-IX Industrial Scales Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order. As seen, it is powered with a 3-Pin 16A non-standard 1-phase plug.

It was tested with an in-house 200g Calibration weight.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Sanyo MIR-553 Incubator Lab Spares/Repairs

ITEM-36207

Sanyo MIR-553 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but the power relay is short circuited so it runs overtemp.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Infors Minitron Shaking Incubator Model AI 72 Lab Spares/Repairs

ITEM-44641

Infors Shaking Incubator Model-AI 72 Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition, but the door does not remain shut. The unit powers on, however, when setting the desired temperature, it remains at ambient temperature and does not raise to lower.

Therefore, it is listed as Spares/Repair.

£ 700.00 (ex. VAT) 1 in stock

Torrey Pines Scientific Inc Echotherm Heating/Chilling Plate IC22-2 Lab

ITEM-38439

Torrey Pines Scientific Inc Echotherm Heating/Chilling Plate IC22-2

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order. It was tested with a digital thermometer (not included).

It is in good cosmetic condition.

General Laboratory

Filters