General Laboratory

£ 800.00 (ex. VAT) 1 in stock

Memmert UN 55 PA Laboratory Oven Lab

ITEM-45513

Memmert UN 55 PA Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The incubator powers on and is in fair cosmetic condition, with a small amount of residual wax remaining after cleaning.

Temperature testing was conducted (thermometer not included).

C22 Style Kettle Lead Included.

Specifications:

Model: UN 55 PA
Serial No.: B215.1207

£ 760.00 (ex. VAT) 1 in stock

Heraeus Labofuge 400 Function Line Benchtop Centrifuge 3500rpm Max Lab

ITEM-36950

Heraeus Labofuge 400 Function Line Benchtop Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs smoothly up to 3500rpm.

It is in reasonable cosmetic condition with light marks and rusting.

Heraeus Rotor #8179

4 x Buckets #8172 Ch.003515

£ 750.00 (ex. VAT) 1 in stock

Eppendorf Model A-2-DWP Rotor 3,700 rpm 2 x Buckets Lab

ITEM-46921

Eppendorf A-2-DWP Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It was unable to be tested further.

Includes:

2 x Swinging Buckets

Specifications:

Maximum speed: 3,700 rpm
Maximum RCF: 2,250 × g
Capacity: Accommodates up to two deepwell plates, microtiter plates, cell culture plates, or filtration plate kits
Compatible with Eppendorf Centrifuge models 5804, 5804 R, 5810, and 5810 R

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Beckman Optima LE-80K Centrifuge Spares/Repair Lab

ITEM-46445

Beckman Optima LE-80K Centrifuge Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but encounters issues when attempting to reach set speeds; the machine beeps and displays messages about microns and speed, then slows down.

Therefore, it is listed as Spares/Repair.

£ 750.00 (ex. VAT) 1 in stock

Ealing Optical Isolation Tabletop Breadboard 149x120x25cm on Bench 156x92x72m

ITEM-42418

Ealing Optical Isolation Tabletop Breadboard on Lab Bench

This item was removed from a university laboratory where it was surplus to requirements.

The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.

It is in good cosmetic condition.

Table Specifications:

Size: 149 x 120 x 25 cm (Length x Width x Height)
Thread Size: Imperial UNF 1/4" - 28
Matrix: 2" square, featuring a grid of 29 x 23 holes

Lab Bench Specifications:

Size: 156 x 92 x 72 cm (Length x Width x Height)
Material: Tubular steel frame with a wooden tabletop

£ 750.00 (ex. VAT) 1 in stock

Ealing Optical Isolation Tabletop Breadboard 154x120x25cm on Bench 156x92x72m

ITEM-42459

Ealing Optical Isolation Tabletop Breadboard on Lab Bench

This item was removed from a university laboratory where it was surplus to requirements.

The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.

It is in good cosmetic condition.

Table Specifications:

Size: 154 x 120 x 25 cm (Length x Width x Height)
Thread Size: Imperial UNF 1/4" - 28
Matrix: 2" square, featuring a grid of 29 x 23 holes

Lab Bench Specifications:

Size: 156 x 92 x 72 cm (Length x Width x Height)
Material: Tubular steel frame with a wooden tabletop

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Sorvall RC-5C+ Plus Floorstanding Centrifuge Lab Spares/Repairs

ITEM-41038

This Sorvall RC-5C Plus Floor-Standing Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up, but shortly after running it produces error code 7 preventing it from being tested, therefore this item is sold as Spares or Repairs.

Error 7 = REFRIGERATION SYSTEM FAILURE There was no apparent drop in chamber temperature thirty seconds after the refrigeration system started to cool. Notify your Thermo Field Service Engineer.

£ 750.00 (ex. VAT) 1 in stock

Job Lot of 8 Helmsman Dispenser Red/Grey 20 Door Pigeon Hole Post Cabinets Lab

ITEM-38696

Job Lot of 8 Helmsman Dispenser Red/Grey 20 Door Cabinets

This job lot of items comes from a university lab, The items were no longer required.

Individual exterior dimensions: L45cm x W38cm x H 182cm. 35Kg.

Individual interior dimensions of each compartment: L43cm W32cm x H8cm.

Item is supplied with 1 Main door opening Key, which opens all cabinets, and an additional 113 Keys for individual cabinets.

Doors with keys have been tested & working.

£ 750.00 (ex. VAT) 1 in stock

Job Lot of 18 Electro Nickel Clifton 1026E Boiling Baths with ER1 Regulators

ITEM-37620

Job Lot of 18 Electro Nickel Clifton 1026E Boiling Baths with ER1 Regulators

These were removed form a university lab where they were surplus to requirements.

The units are all in good working order.

£ 750.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek 2000 Laboratory Automation Workstation

ITEM-35153

This Beckman Coulter Biomek 2000 Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.

The item powers on but is unable to be tested further without software.

The item is in a reasonable, used cosmetic condition with marks and scuffs.

It comes with a sealed box of Beckman P 20 Pipette Tips (20ul)

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

New Brunswick Innova 44R Refrigerated Shaking Incubator Lab Spares/Repairs

ITEM-45166

New Brunswick Innova 44R Incubator Broken Shaker Lab

This item was removed from a university lab where it was surplus to requirements.

The incubator is in reasonable good used cosmetic condition, with some rust around the edges of the lower base.

The unit powers on and was successfully temperature tested. However, it has a faulty shaker motor and stuck bolts on the shaker plate, which require significant work for repair, but is entirely possible for someone to do.

Due to the faulty shaker element, this item is listed as Spares/Repair.

Specifications:

Model: Innova 44R
Condition: Fair, requires repair for shaker motor
Functionality: Incubation temperatures tested and reached correctly

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-17AI CO2 Incubator Lab

ITEM-44771

Sanyo MCO-17AI CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

Specifications;

Model: MCO-17AI
Serial#: 90100724

£ 750.00 (ex. VAT) 1 in stock

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge with 6000rpm Rotor Lab

ITEM-40061

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs well to 6000rpm. It also cools and incubates as it should.

It is in good cosmetic condition with minor marks.

It is supplied with;

MSE Rotor 43124-141

SN - 7962

Max RPM - 6000

4 x Buckets

4 x Beige Adaptors hold 1 x 50ml tube each

£ 750.00 (ex. VAT) 1 in stock

ELGA Purelab Option-S 7 BP with DV 35 Tank Lab

ITEM-38837

ELGA Purelab LA620 DV 35 Water Purification Unit Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. We are unable to conduct further testing at our facility.

Includes:

1 x ELGA Sanitisation Block - LA567
1 x DI Cartridge Pack
1 x ELGA Pretreatment Cartridge Part No. - LC140

Features:

Max Pressure inlet - 0.07/1
Max Pressure Working - 0.07/1
Serial No. - 620L2323233
Version - PURELAB Option-S v21.01.

£ 750.00 (ex. VAT) 1 in stock

Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810

ITEM-37249

Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810

This item was removed from a university where it was surplus to requirement.

It is in good, used cosmetic condition.

Specifications:

Type: 2-in-1 Fixed Angle and Swinging Bucket Rotor
Max RCF: 3,114 x g (Fixed Angle), 3,490 x g (Swinging Bucket)
Radius: 116/37 mm Fixed Angle, 130/42 mm Swinging Bucket
Angle: 45° Fixed, 12 to 87° Swinging Bucket
Capacity: 8 x 15 mL (Fixed Angle), 8 x 10 mL (Swinging Bucket)
Max Speed: 300 to 4,900 rpm, adjustable in increments of 100 rpm

£ 750.00 (ex. VAT) 1 in stock

Stuart SI60 Clear Chamber Forced Air Incubator, 60 L Lab

ITEM-44775

Stuart SI60 Clear Chamber Forced Air Incubator, 60 L Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order.

Specifications:

Model: SI60
Serial#: R000100205

£ 750.00 (ex. VAT) 1 in stock

Beckman Coulter BioMek NXp Laboratory Automation System Lab

ITEM-41419

Beckman Coulter BioMek NXp Laboratory Automation System Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up.

The system includes the following:

Software
PC and monitor
Manual
40 x boxes of 10 racks of P20 pipette tips
8 boxes of 10 racks of P250 pipette tips
1 x Biomek valve Unit
1 x Inheco TEC Control 96/RS232
1 x Biomek Modular Reservoir Quarter Module 40mL Capacity (48 reservoirs)
1 x Biomek Modular Reservoir Half Module 75mL Capacity (24 reservoirs)
Box of tubing
Box of spare parts and accessories
1 x light curtain test rod

£ 750.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek NXp Laboratory Automation Workstation Cat no. A31840 Lab

ITEM-20385

This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.

Everything powers up and the system is in good cosmetic condition with some marks from use.

There appears to be an issue with at least one of the injectors. When we attempt to 'home' the robot head it will start to home the various parts, then stall and with an error code

'error homing: Y2 Axis error: Motion error; the axis was unable to perform the specified move. (0100)

We believe the issue is with the #2 injector side-to-side motor. The up-and-down motor appears to run well.

This error makes it impossible to home the system. So it could not be tested any further.

The system comprises of;

1 x Beckman Coulter Biomek NXp Laboratory Automation Workstation

Cat no. A31840

Unit dimensions - W77 L92 H98cm

1 x IBM ThinkCentre PC

MT-M 8113-DA1

Biomek Software Version 3.3 installed.

1 x Lenovo Monitor

Type - 9227-AC1

1 x Lenovo Keyboard

1 x IBM Mouse

2 x Nalgene 2 Gallon Waste/Supply Bottles

Box of Accessories:-

Beckman Coulter AccuFrame

Beckman Coulter Vacuum Valve Unit

Power Adaptor

Various cables

8 x 2ml Tube holders (24 tube slots in each)

94 x 2ml tubes

Vacuum Manifold Base

23mm Spacer Collar PN 719751

36mm Collar

3 x Thermo Scientific 96 well 0.2ml plates.

£ 750.00 (ex. VAT) 1 in stock

Thermo Scientific Matrix Hydra II Automated Liquid Handling System Lab

ITEM-23391

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition with marks from use. All modules power up.

We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes.

The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working.

The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal.

We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts.

The system is made up of the following;

1 x Matrix Hydra II

Cat no. 109610

1 x Matrix 2 Position Stage

1 x Apogent Discoveries Matix Hydro Pump Module

The unit powers on with all 3 Fills working.

1 x Matrix P1 Control Box

1 x Innovadyne 1-Channel Nanofill

The unit powers up.

1 x Grant Instruments Type MS1

The unit powers up.

Dell Laptop with Microsoft Mouse

Model - PP04X

Hydra II-Plus-One Control Software Version 3.1.3 Installed

The unit powers up and the software runs.

Software Discs:

Matrix Hydra II-Plus-One Control Software Version 3.1.3

Matrix Hydra II-Plus-One Control Software Version 3.1.2

SuperLogics LE Software Suite Rev 2.9

2 x Socket Installation discs

Various tubing and accessories

Operating instructions

£ 750.00 (ex. VAT) 1 in stock

Porkka Commercial Laboratory Ice Machine Model KF75 Lab

ITEM-24767

This Porkka Commercial Laboratory Ice Machine Model KF75 was removed from a university lab where it was surplus to requirements.

The unit powers up and the lab informed us that it had no known issues.

We have tested it and it is in good working order.

It is in good cosmetic condition with marks from use.

Because it was removed from a laboratory environment this is sold strictly for lab use only.

£ 745.00 (ex. VAT) 1 in stock

Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator Lab

ITEM-29757

This Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. It will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item has 4 shelves.

Internal dimensions are L49cm x W48cm x H66cm.

£ 745.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator Lab

ITEM-29766

This Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator was removed from a university lab where ti was surplus to requirements.

The unit powers up and is in good working order but will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item is supplied with 4 shelves.

Internal dimensions are L45cm x W45cm x H66cm.

£ 740.00 (ex. VAT) 1 in stock

Sorvall Dupont Super-Lite GS-3 Model SLA-3000 Fixed Angle Rotor With Lid

ITEM-37954

This Sorvall Dupont Super-Lite GS-3 Model SLA-3000 Fixed Angle Rotor With Lid was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used.

1200 rpm max

6 x position 500ml capacity

Compatible with Thermo Scientific Sorvall Evolution RC Series and RC-6 Series centrifuges including RC-5, RC-5B, RC-5B Plus, RC-5C Plus, and RC-26

RECERTIFIED ITEM

£ 730.00 (ex. VAT) 1 in stock

Durafuge 100 Precision Centrifuge Cat no. 51231201 with SO-1X Rotor Lab

ITEM-26173

Durafuge 100 Precision Centrifuge Cat no. 51231201 with SO-1X Rotor

This was removed from a university lab where it was surplus to requirements.

It has been tested by a service engineer and is in full working order. It is in very good cosmetic condition with only minor marks from use. A brand new gas strut was fitted by the engineer.

Rotor - Precision SO-1X

Cat no. 51231203

4 x Swinging buckets - SO-1X

Cat no. 51231221

SN - 1302/01

4 x Adaptors to fit 15ml tubes

Cat no. 51231208

£ 730.00 (ex. VAT) 1 in stock

Bright Model M3500 Rotary Microtome Lab

ITEM-29829

This Bright Model M3500 Rotary Microtome was removed from a university lab where it was surplus to requirements.

The unit powers up with 2 x AA batteries (not included) and is in good working order mechanically, but has not been tested on samples.

It is in very good cosmetic condition with only minor marks from use.

£ 725.00 (ex. VAT) 1 in stock

Reichert-Jung Ultracut E Microtome 70 17 74 Lab

ITEM-35673

Leica Reichert Ultracut E Microtome

This was removed from a university lab where it was surplus to requirements.

The unit was tested with a controller from another unit (not included), but was found to power up and operate correctly.

It is in good cosmetic condition with minor marks

Head - Reichert Stereo Star Zoom

0.7X to 3.0X 569

2 x Eye pieces - 15X W.F 184

£ 715.00 (ex. VAT) 1 in stock

Statebourne biostor 5 Liquid Nitrogen Cryogenic Storage Tank/Dewar Lab

ITEM-17266

This Statebourne biostor 5 Liquid Nitrogen Cryogenic Storage Tank/Dewar was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but as it is a used item it will have some scrapes and marks from use.

It comes with a set of 6 storage racks and a trolley.

It has not been tested.

£ 715.00 (ex. VAT) 1 in stock

LTE Scientific IP100-U Laboratory Incubator Lab

ITEM-36518

LTE Scientific IP100-U Laboratory Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in reasonably good cosmetic condition with minor marks. (Digital thermometer not included).

£ 710.00 (ex. VAT) 1 in stock

Torrey Pines Scientific Inc Echotherm Chilling/heating Plate IC22-2

ITEM-38440

Torrey Pines Scientific Inc Echotherm Heating/Chilling Plate IC22-2

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order. It was tested with a digital thermometer (not included).

It is in good cosmetic condition.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Rigaku X-Stream 2000 Cryogenic Crystal Cooler System CP830, XS-2000 Lab

ITEM-42071

Rigaku X-Stream 2000 Cryogenic Crystal Cooler System

This system was removed from a university lab where it was surplus to requirements.

The Rigaku X-Stream 2000 main unit did not power on when tested with a 3 Phase test plug. It is in good cosmetic condition with minimal wear.

The cryogenic crystal cooler powers on and is in good condition with minimal wear. It has passed a PAT test, but no further testing was performed.

Due to the main unit not powering on, this system is listed as Spares/Repair.

Specifications:

Main Unit
Model: CP830
Serial No.: 1831322-240105A
Cryogenic Crystal Cooler
Model: XS-2000
Serial No.: 800150

£ 700.00 (ex. VAT) 1 in stock

Edwards Freeze Dryer Modulyo Lab

ITEM-39926

This Edwards Freeze Dryer Modulyo was removed from a university lab where it was surplus to requirements.

The item powers on and is in reasonably poor cosmetic condition, unable to test it further at our facility.

It cools down but has not been tested under a vacuum.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Carl Padberg Zentrifugenbau Filter Centrifuge LE Lab Spares/Repairs

ITEM-36357

This Carl Padberg Zentrifugenbau LE was removed from a university lab where it was surplus to requirements.

The cosmetic condition of this item is fairly good and it has powered on.

We set the unit to 20,000rpm. It does ramp up quite slowly to speed. It reached 21,000+ and started to hold speed.

We're not sure how accurate the speed adjustment is. It didn't seem to fully hold at 20,000rpm, it kept slowly rising. The belt looks like it needs replacing too.

For this reason, It is sold for spare/repairs

The speed range is from 15000 to 40000 rpm.

Additionally included:

1x New Brunswick Scientific power supply switching/speed selection unit

1x Huber and Moser motor

£ 700.00 (ex. VAT) 1 in stock

Large Safety Cabinet/Cupboard fitted with Gas Regulators Lab

ITEM-39050

Large Safety Cabinet/Cupboard fitted with Gas Regulators

This was removed from a university lab where it was surplus to requirements.

The unit is untested but in reasonably good cosmetic condition.

£ 700.00 (ex. VAT) 1 in stock

Sartorius EB35EDE-IX Industrial Laboratory Scales Lab

ITEM-44655

Sartorius EB35EDE-IX Industrial Scales Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order. As seen, it is powered with a 3-Pin 16A non-standard 1-phase plug.

It was tested with an in-house 200g Calibration weight.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova U725 -86 G Ultra Low Temperature Freezer Lab

ITEM-40064

New Brunswick Scientific Innova U725-G Ultra Low-Temperature Freezer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on but shows power fail after 5 mins and will not run, therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Sanyo MIR-553 Incubator Lab Spares/Repairs

ITEM-36207

Sanyo MIR-553 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but the power relay is short circuited so it runs overtemp.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Infors Minitron Shaking Incubator Model AI 72 Lab Spares/Repairs

ITEM-44641

Infors Shaking Incubator Model-AI 72 Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition, but the door does not remain shut. The unit powers on, however, when setting the desired temperature, it remains at ambient temperature and does not raise to lower.

Therefore, it is listed as Spares/Repair.

£ 700.00 (ex. VAT) 1 in stock

BECKMAN Model J2-21 Floor Standing Centrifuge Lab

ITEM-21249

This BECKMAN Model J2-21 Floor Standing Centrifuge was removed from a university lab where it was surplus to requirements.

The unit is in full working order but is not supplied with a rotor.

It is in reasonably good cosmetic condition but has cracks on the door hinge and latch.

£ 700.00 (ex. VAT) 1 in stock

Lowara E-SV 10SV18F075T Vertical Multistage Pump Lab

ITEM-41473

Lowara E-SV 10SV18F075T Vertical Multistage Pump Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, and powers on, we are unable to test it further at our facility.

This item is fitted with 3-Phase 32amp plug.

£ 700.00 (ex. VAT) 1 in stock

Torrey Pines Scientific Inc Echotherm Heating/Chilling Plate IC22-2 Lab

ITEM-38439

Torrey Pines Scientific Inc Echotherm Heating/Chilling Plate IC22-2

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order. It was tested with a digital thermometer (not included).

It is in good cosmetic condition.

£ 700.00 (ex. VAT) 1 in stock

Thermo Scientific Sparkfree Laboratory Refrigerator Model FR157SF Lab

ITEM-42320

Thermo Scientific Sparkfree Laboratory Refrigerator Model FR157SF

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

Specifications:

Model: FR157SF
Serial No.: 0000017954
Year: 2008

£ 700.00 (ex. VAT) 1 in stock

Grant-Bio PHMP-4 Microplate Thermoshaker Lab

ITEM-46367

Grant-Bio PHMP-4 Microplate Thermoshaker

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and is in full working order.

This psu is included.

£ 700.00 (ex. VAT) 1 in stock

Envair Bio 2+ Class 2 Biological Safety Cabinet Lab

ITEM-46744

Envair Bio 2+ Class 2 Biological Safety Cabinet Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition, with some surface wear, and is in good working order.

£ 700.00 (ex. VAT) 1 in stock

Millipore Elix 5 Water Purification System + 60L Tank Lab

ITEM-46763

Millipore Elix 5 Water Purification System + 60L Tank Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition with signs of age and powers on, we are unable to test it further at our facility.

Please not; the included filter has expired, therefore it will require a replacement before use.

£ 700.00 (ex. VAT) 1 in stock

Quattro IMF008 Automatic Ice Maker Flaker Machine Lab

ITEM-46707

IMF008 Automatic Ice Maker Flaker Machine Lab

This item was removed from a university lab where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 680.00 (ex. VAT) 1 in stock

Jouan BR3.11 Refrigerated Benchtop Centrifuge Lab

ITEM-29891

This Jouan BR3.11 Refrigerated Benchtop Centrifuge was removed from a university lab where it was surplus to requirements

The unit powers up and is in good working order, but the lid has to be opened manually. The automatic switch is broken

It is in good cosmetic condition with minor marks.

Rotor Arm:

Max Load 2.8kg

Max RPM 5150

Buckets x 2:

Dimensions L5.5cm x W5.5cm x H9.5cm

Rotor:

Part No. 803

6 Hole

Dimensions L2cm x W2cm x H4cm

£ 675.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus Lab

ITEM-29748

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus

This was removed from a university lab where it was surplus to requirements.

The unit powers up and both the incubation and CO2 function have been tested. It is in good working order (Temp & CO2 sensor not included).

It is in reasonable cosmetic condition but has seen some heavy use on the inside. It is purely cosmetic though.

SPARES/REPAIR ITEM

£ 665.00 (ex. VAT) 1 in stock

METTLER TOLEDO XSR1202S Precision Balance Lab Spares/Repairs

ITEM-35274

METTLER TOLEDO XSR1202S Precision Balance

This was removed from a university lab where it was surplus to requirements.

The unit powers up with a 12V DC supply (not included), but the control buttons are not functioning.

It is sold for spares/repairs.

£ 650.00 (ex. VAT) 1 in stock

Eppendorf A-4-44 Rotor 5000rpm 2x 50ml Lab

ITEM-46919

Eppendorf A-4-44 Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It has a maximum RPM of 5000. It was unable to be tested further.

Includes:

4x Swinging buckets
2x 50ml test tube holders in each bucket

Model: A-4-44

£ 650.00 (ex. VAT) 1 in stock

New Brunswick Scientific U410-45 Ultra Low Temperature Freezer Lab

ITEM-37018

New Brunswick Scientific U410-45 Ultra Low Temperature Freezer Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

it is in good cosmetic condition with minor marks

4 Shelves - 57 x 55cm

General Laboratory

Filters