Items 1 to 20 of 23

Image of item

£ 135.00 (ex. VAT) 1 in stock

2-Tier Centrifuge Trolley With Wheels Lab

ITEM-13806

This wheeled centrifuge trolley was removed from a laboratory during a clearance.


It is in good condition with only light markings and no damage.


The dimensions are as follows;

82x61x40cm

Shelf: 74x58x21cm

Loose metal piece: 51x33cm



Image of item

£ 337.50 (ex. VAT) 1 in stock

3-Tier Workshop Garage Industrial Parcel Racking 2.5m tall, 4-5 Bays

ITEM-13018

This set of racking was removed from a university store as surplus to requirements.


This lot comprises 6 x uprights which are 250cm Tall.


12 x Shelf boards. 12 x pairs of shelf supports (24 total).


The boards are 180cm L x 45cm W x 2cm Thick.


Based on this, you could configure it as 3 joined bays of 3 shelves (using 4 uprights and 9 pairs supports/boards) and 1 free-standing bay of 3 shelves (using 2 uprights and 3 pairs supports/boards).


Total palleted weight is approx 380kgs.

Image of item

£ 820.12 (ex. VAT) 1 in stock

Bigneat BC1204/01 Chemcap Filtration Cabinet Lab

ITEM-11720

This unit was removed from a lab as surplus to requirements.


We powered on the unit and the replace filter light started flashing. We removed the filter and it stopped flashing, then we put the filter back in and it started flashing. So you may need to replace the filter depending on your applications.

Image of item

£ 416.25 (ex. VAT) 1 in stock

BioQuell Microflow Class I 1 Biological Safety Cabinet Lab Microbiological

ITEM-15296

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.


In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.


A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.


This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected. Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.


The filter was removed during decontamination, and the unit is generally in good condition.



Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.

Image of item

£ 412.50 (ex. VAT) 1 in stock

BioQuell Microflow Class I Biological Safety Cabinet Lab

ITEM-14956

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.


In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.


A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure. This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.


Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.


The filter was removed during decontamination, and the unit is generally in good condition.


Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.

Image of item

£ 405.00 (ex. VAT) 1 in stock

BioQuell Microflow Class I Biological Safety Cabinet Microbiological Lab

ITEM-14957

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.


In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.


A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.


This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.


Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.


The filter was removed during decontamination, and the unit is generally in good condition.



Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.

Image of item

£ 375.00 (ex. VAT) 1 in stock

BioQuell Microflow Class I Biological Safety Cabinet MSC 1 Lab

ITEM-14958

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.


In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.


A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.


This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.


Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.


The filter was removed during decontamination, and the unit is generally in good condition.


Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.



The filter was removed during decontamination and the top section of the extraction system is broke. Overall in moderate to poor condition.

Image of item

£ 30.00 (ex. VAT) 1 in stock

Black Pleather Plastic Leather Seated Lab Chair Stool

ITEM-14330

This Black Pleather Lab Stool was removed from a university where ti was surplus to requirements.


It is in good cosmetic condition. The chair has a metal frame and legs. It is 63cm from the floor to the top of the seat.




Image of item

£ 460.10 (ex. VAT) 2 in stock

Contained Air Solutions CAS Class 1 Biological Safety Cabinet Pathmat Lab

ITEM-07314

This unit was removed from a chemistry research laboratory after its closure.


The unit was in full working order when last used, but hasn't been used in 8 years so may require some refurbishment.


We have stands available for the first few unit - please enquire if you need a stand.

Image of item

£ 410.06 (ex. VAT) 1 in stock

Mach-Aire Weigh Booth Powder Weighing Station Lab

ITEM-07316

This powder weighing station was removed from a chemistry lab as surplus to requirements.


It looks to be in excellent condition.


Please note there is no extractor - it is only the weigh booth itself.

Image of item

£ 450.00 (ex. VAT) 1 in stock

Microflow Bioquell Class 1 Biological Safety Cabinet M50230/SP2 Lab

ITEM-14157

This unit was removed from a lab facility during a building closure as it was no longer required.


Unit powers on and lights and fans start up but we have not tested it any further.


Unit is in fair condition. Looks like it was manufactured in 1992.


Unit is untested as all the power cables have been cut.


The front panel needs the threads replacing on both of the outer clamp down knobs.

The two inner ones are fine, but the threads are slipping on both outer ones.

The panel will not screw down flush to the unit.

Should be an easy fix.


Please note this unit must be safety inspected and commissioned by an engineer prior to use. It may also require new filters - we have not inspected if they are included or in useable condition.


There is no stand.


Unit is approximately 145cm long, 60cm deep and 66cm high.




Image of item

£ 405.00 (ex. VAT) 1 in stock

Microflow Class I 1 Microbiological Safety Cabinet Lab Biological MSC

ITEM-14970

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.


In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.


A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.


This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.


Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.


The filter was removed during decontamination, and the unit is generally in good condition.


Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.


Internal Dimensions:

148cm W x 65cm D x 62cm H.

Image of item

£ 420.00 (ex. VAT) 1 in stock

Microflow Class I 1 MSC Biological Safety Cabinet Lab Microbiological

ITEM-14969

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.


In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.


A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.


This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.


Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.


The filter was removed during decontamination, and the unit is generally in good condition.


Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.


Internal Dimensions:

148cm W x 65cm D x 62cm H.

Image of item

£ 423.75 (ex. VAT) 1 in stock

Microflow Class I Biological Safety Cabinet MSC Lab 1

ITEM-14966

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.

In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.


A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.


This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.


Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.


The filter was removed during decontamination, and the unit is generally in good condition.


Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.


Internal Dimensions:

148cm W x 65cm D x 62cm H.

Image of item

£ 408.75 (ex. VAT) 1 in stock

Microflow Class I Microbiological Biological Safety Cabinet MSC Lab

ITEM-14971

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.


In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.


A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.


This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.


Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.


The filter was removed during decontamination, and the unit is generally in good condition.


Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.


Internal Dimensions:

148cm W x 65cm D x 62cm H.

Image of item

£ 30.00 (ex. VAT) 1 in stock

Network 3 Drawer Lab Cupboard

ITEM-14910

This Network 3 Drawer Cupboard was removed from a laboratory where it was surplus to requirements.


It is in reasonable condition but is missing a foot.


Drawers are: 43.5cm Wide x 43.5cm Deep x 9.5cm High.


Image of item

£ 150.00 (ex. VAT) 1 in stock

NuAire NU 5550 Hepa Filter For Class II Biosafety Cabinets P/N: A-980899-01 Lab

ITEM-15442

This NuAire NU 5500 Hepa Filter was removed from a lab where it was surplus to requirements. It is brand new and sealed.


Part Number A-980899-01.

Air flow rating 15cfm.

Efficiency >99.99(0.3 micron)

Resistance <0.50inches w.g.



Image of item

£ 75.00 (ex. VAT) 1 in stock

Olive Green Vintage Metal Filing Cabinet With 15 Drawers Office Equipment

ITEM-14942

This Olive Green Vintage Filing Cabinet was removed from a university where it was surplus to requirements.


It is in reasonable condition but is showing lots of signs of age with areas of rust and patina.


It is in usable condition but could make for a good restoration project.


The make and model is unknown.


It measures:

99cm H x 40cm D x 27cm W.


Drawers:

37cm L x 23cm W x 5cm D.


Image of item

£ 519.75 (ex. VAT) 1 in stock

Scie-Plas GLE-UVSC UV Sterilisation Cabinet / Workstation Lab

ITEM-14288

Scie-Plas GLE-UVSC UV Sterilisation Cabinet.


This item was removed from a lab during a clear out.


The unit powers on and appears to work well. All UV bulbs and the white light bulb work.


Unfortunately it's not very good cosmetically.


The base measures:


57cm L x 54cm W.


The unit is 75cm H.


Please see photos for further details.





Image of item

£ 150.00 (ex. VAT) 1 in stock

Single Door Laboratory Chemical / Flammable Materials Storage Cabinet Grey Lab

ITEM-09301

This Single Door Laboratory Safety Cabinet For Hazardous Materials was removed from a lab where it was surplus to requirements.


It is in good condition but has been previously used.

Items 1 to 20 of 23