Items 1 to 20 of 24

Image of item

£ 91.55 (ex. VAT) 1 in stock

2x HYBAID Micro4 HB-MCR4 Hybridization Oven Spares Repair

ITEM-08732

This unit was removed from a lab store room as surplus to requirements. They had faulty / broken stickers on them so we are selling as spares / repairs only.

Image of item

£ 233.52 (ex. VAT) 1 in stock

Affymetrix GeneChip 640 Hybridization Oven Lab Heating Equipment

ITEM-10948

This unit was removed from a lab as surplus to requirements.


The lab manager assured us the unit was in full working order prior to removal.

Image of item

£ 210.17 (ex. VAT) 1 in stock

Appligene Etuve Hybridisation Oven Lab Hybrid.91, 500W, 6RPM

ITEM-09390

This item was removed from a lab as surplus to requirements. We have tested the unit and it appears to heat and rotate as expected but we havn't tested it fully with samples etc. However, the lab assured us that the unit was in full working order prior to removal. Therefore if you encounter any issues with the system we will offer you a full refund and cover return postage costs.

Image of item

£ 187.50 (ex. VAT) 1 in stock

Biometra Mini Hybridization Oven OV3 Lab

ITEM-19582

This Biometra Mini Hybridization Oven OV3 was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included).

When set to 37˚C our thermometer read 37˚C.

When set to 100˚C our thermometer measured 73˚C. It would not get any higher than this. 73 seems to be the max temp.


The rotisserie shaker seems to be working and all the buttons are responsive.


It is in good cosmetic condition with some minor marks from use.

Image of item

£ POA 1 in stock

Carbolite Bench-Top Laboratory Oven Model PF60 Lab Spares/Repairs

ITEM-20132

This Carbolite Bench-Top Laboratory Oven Model PF60 was removed from a university lab where it was surplus to requirements.


The unit is in reasonable cosmetic condition but has signs of heavy use. Lots of stains and marks. The interior is clean and has only minor signs of use.


The unit did not power up and has not been tested.


Internal measurements:

41cm D, 39cm W, 40cm H


Shelf measurements:

39cm L, 38cm W


It is sold for spares/repairs


Image of item

£ 214.84 (ex. VAT) 1 in stock

Clifton-Kjeldahl 6x Positions Extraction Heater Lab 2700W (6x450W)

ITEM-12952

Clifton-Kjeldahl 6x Position Extraction Heater 2700W

This unit was removed from a lab as surplus to requirements.

It appears to be in full working order.


Image of item

£ POA 1 in stock

Corsair Manufacturing Model CH307 Drying Oven Cabinet Lab Spares/Repairs

ITEM-19000

This Corsair Manufacturing Model CH307 Drying Cabinet was removed from a university lab where it was surplus to requirements.


It is in reasonable cosmetic condition but is missing a knob and a door handle.


The unit powers up and has been tested with a digital thermometer. We were unable to set the temperature as it is missing the control knob. It reached 99˚C.


Internal measurements L 100cm, H 65cm, W 38cm.

Shelf measurements L 98cm, W 34cm.


It is sold for spares/repairs due to the missing knob.


Image of item

£ 150.00 (ex. VAT) 1 in stock

Gallenkamp Laboratory Oven Cat no. OPL075.WT1.C Lab Spares / Repairs

ITEM-19894

This Gallenkamp Laboratory Oven Cat no. OPL075.WT1.C was removed from a university lab during a clearout.


We were informed the unit was working but just noisy - however our testing suggested otherwise.


The unit powered up but the temperature display seemed faulty as it was constantly changing itself and not responding to the inputs of the dial. We did try to let it heat up but it tripped the fuse box in our testing room. We didn't try to test it further following that.


It is in reasonably good cosmetic condition but has some marks from use.


Internal dimensions - D38 x W40 x H47.5cm


It is sold for spares or repairs.

Image of item

£ 252.87 (ex. VAT) 1 in stock

Genlab Model M6C Benchtop Laboratory Oven / Incubator Lab Small

ITEM-18196

This Genlab Model M6C Benchtop Laboratory Oven was removed from a university lab where it was surplus to requirements.


The unit powers on and has been tested. It reached and held at 37C when set, and when set to the max of 100C it reached 85C.


It is in good cosmetic condition with some marks from use.


Inside Dimensions:

W23 x H15 x D19cm

1 Shelf sized - 22.5 x 16cm



Image of item

£ POA 1 in stock

Hybaid Dual Hybridisation Oven with Rotisserie Shaker Lab

ITEM-19956

This Hybaid Dual Hybridisation Oven & Shaker was removed from a university lab where it was surplus to requirements.


The unit powers up but the rotisserie shaker doesn't seem to be running. The motor tries to run but it does not turn.


The temperature was set to 37˚C which it reached, but it tripped the electrics in our testing room. It was not tested further.


It is in reasonably good cosmetic condition but has some marks from use.


It is sold for spares or repairs due to the faults.





Image of item

£ 385.70 (ex. VAT) 1 in stock

Hybaid Maxi Hybridization Oven Cat No:HB-DD-OV-1 Lab

ITEM-15437

This Hybaid Maxi Hybridization Oven was removed from a university where it was surplus to requirements.


The unit powers up fine and appears to work as it should. It has been tested at 37degC which it reached very quickly and the maximum of 99.9degC. It reached 83.3degC and then the fault light lit. We suspect this is due to a thermal cut off.

The rotisserie units both rotate although it is only fitted with one rotor and comes with one glass tube. It also comes with one rack.


The unit is in good condition but is showing signs of use.


Internal dimensions: 67cm H x 39cm W x 37.5cm D.


Image of item

£ 108.20 (ex. VAT) 2 in stock

Hybaid Micro-4 Hybridization Oven + Tubes and Rotor Lab

ITEM-08865

This unit was removed from a lab during a clearout.


We have powered it and tested the heating of the unit. It was tested at both 37c and the max of 70c where it reached 87c.


The unit is in good condition but has been used previously.


Please note that we have 2 of these units in stock and that you may not receive the one in the photos but will receive one in near-identical condition. However, if you would like to see photos of the exact unit prior to dispatch just let us know.


Image of item

£ 189.70 (ex. VAT) 1 in stock

Hybaid Mini Lab Oven Hybridisation & Accessories

ITEM-12903

Hybaid Mini Lab Oven Hybridisation & Accessories - Equipment Class 1

This unit was removed from a lab as surplus to requirements.

It appears to be in full working order.


Image of item

£ 238.19 (ex. VAT) 1 in stock

Hybaid Shake n Stack Hybridisation Oven Lab + Glassware

ITEM-09565

This oven was removed from a lab as surplus to requirements.


It appears to be in full working order.

Image of item

£ 1,770.35 (ex. VAT) 1 in stock

Lainox KME101S Combination Electric Oven Catering Commercial

ITEM-10559

This oven was removed from a conference centre kitchen as surplus to requirements.


It was in full working order prior to removal.

Image of item

£ POA 1 in stock

Marrutt Model 24PG Benchtop Photographic Film Drying Cabinet Lab

ITEM-17132

This Marrutt Model 24PG Benchtop Film Drying Cabinet was removed from a university lab where it was surplus to requirements


The unit powers up and has been tested with a digital thermometer (not included). We think the thermostat may be faulty as it seems to heat to the same or a very similar temperature regardless of the setting.


It is in reasonably good cosmetic condition with some marks from use and rusting from age. -

Image of item

£ POA 1 in stock

Medline Scientific Vacuum Oven Model - OV-11 Lab Spares or Repairs

ITEM-18266

This Medline Scientific Vacuum Oven Model - OV-11 was removed from a university lab where it was surplus to requirements.


The unit does not power on. We were previously informed that it was faulty by the lab we collected it from but the fault is unknown. The fuse has not blown.


It is in reasonably cosmetic condition with marks from use.


It is sold as spares or repairs.


Image of item

£ 150.00 (ex. VAT) 1 in stock

Memmert Laboratory Drying Oven Type - UM400 Lab Spares / Repairs

ITEM-19837

This Memmert Laboratory Drying Oven Type - UM400 was removed from a university lab where it was surplus to requirements.


The unit does not power up. It blew the fuses and the electrics in our testing room when plugged in and turned on.


It is in reasonably good cosmetic condition with some marks from use


Inside dimensions - D33 x W40 x 40cm

1 Shelf - 28 x 39cm


It is sold for spares or repairs.


Image of item

£ POA 1 in stock

Salvis Thermocenter Laboratory Oven Type TC-40 B Lab

ITEM-19575

This Salvis Thermocenter Laboratory Oven Type TC-40 B was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included).


When set to 40˚C the thermometer measured 40.7˚C.

When set to 200˚C the thermometer measured 205.5˚C.


It is in good cosmetic condition with some surface marks on the back and the sides of the unit. It is missing two feet but could be easily replaced as they screw in.






Image of item

£ 109.85 (ex. VAT) 1 in stock

Set of 4 Buchi GKR-50/51 Glass Tube Oven Controllers (For Spare Parts Only)

ITEM-08458

This unit was removed from a lab during a clearout. They were in an area with a mix of faulty and working equipment, so we cannot be sure that all units are working properly.


We have powered them on but not tested them further.

Items 1 to 20 of 24