All Products
Items 1701 to 1750 of 3558
£ 750.00 (ex. VAT) 1 in stock
Numatic Floor Scrubber/Dryer Model TT 1535S
ITEM-54241
Numatic Floor Scrubber/Dryer Model TT 1535S
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 750.00 (ex. VAT) 1 in stock
Labcaire PCR8 PCR Workstation/Laminar Flow Cabinet Lab
ITEM-51575
Labcaire PCR8 PCR Workstation/Laminar Flow Cabinet Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Please note; There is no UV bulb fitted.
£ 750.00 (ex. VAT) 1 in stock
Heraeus Heracell 150 Co2 Incubator Lab
ITEM-38196
Heraeus Heracell 150 Co2 Incubator Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
It is in good cosmetic condition externally but the copper interior has tarnished.
£ 750.00 (ex. VAT) 1 in stock
Zeiss Filter Cube Set 489043-9901-400 Set 43 Microscope Lab
ITEM-51799
Zeiss Filter Cube Set 489043-9901-400 Set 43 Microscope Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition.
Filters;
- EX BP 550/25
- FT 570
- EM BP 605/70
- Part No. 489043-9901-400-
- Module part no. 424933
Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.
For use with the following:
- Axio Imager.M1
- Axio Imager.Z1
- Axio Observer.A1
- Axio Observer.D1
- Axio Observer.Z1
- Axio Observer.Z1 Cell Observer
- Axio Observer.Z1m ACR
- PALM MicroBeam Rel.4.2
- PALM MicroTweezers Rel.4.2
- PALM CombiSystem Rel. 4.2
- Axio Imager.Z1 + ApoTome
- Axio Observer.Z1 Cell Observer SD
- Axio Observer.Z1 TIRF 3
- Axio Imager.A2
- Axio Imager.D2
- Axio Imager.M2
- Axio Imager.Z2
- Axio Observer.D1 TIRF 3
- Axio Scan.Z1
- Axio Observer 3 materials
- Axio Observer 5 materials
- Axio Observer 7 materials
- Axio Observer 3
- Axio Observer 5
- Axio Observer 7
- Axio Observer 7 Cell Observer SD
- ELYRA 7
- LSM 900
- LSM 980
- Cell Observer SD
- Axioscan 7
- Lattice SIM 3
- LSM 910
- LSM 990
£ 750.00 (ex. VAT) 1 in stock
Zeiss Power Supply 232 for Zeiss Axio, Imager & Observer Microscopes Lab
ITEM-51803
Zeiss Power Supply 232 for Zeiss Axio, Imager & Observer Microscopes Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, it was removed from a working Zeiss Observer .Z1 microscope.
£ 750.00 (ex. VAT) 1 in stock
Sigma 1-14 Benchtop Centrifuge w/ Rotor 14800 RPM
ITEM-52707
Sigma 1-14 Benchtop Centrifuge with Rotor – 14,800 RPM
This item was removed from a facility where it was surplus to requirements.
The unit is in good cosmetic condition and is in good working order.
Please note that a high-pitched whine becomes noticeable when the unit is operated above approximately 10,000 RPM.
£ 750.00 (ex. VAT) 1 in stock
Applied Biosystems 7500 Real Time PCR System
ITEM-51026
Applied Biosystems 7500 Real Time PCR System
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Last Service: 2020
£ 750.00 (ex. VAT) 1 in stock
Applied Biosystems 7500 R-T Real-Time PCR machine 96 Well
ITEM-51305
Applied Biosystems 7500 R-T Real-Time PCR machine
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 750.00 (ex. VAT) 1 in stock
Acquity Ultra Performance LC 2996 PDA Detector Lab
ITEM-41571
Acquity Ultra Performance LC 2996 PDA Detector Lab
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition overall.
Please note: The plastic casing is cracked as displayed, though this appears to be cosmetic and does not affect functionality.
£ 750.00 (ex. VAT) 1 in stock
Copley DIS 6000 Dissolution Tester Lab
ITEM-50196
Copley DIS 6000 Dissolution Tester
This item was removed from a facility where it was surplus to requirements.
The unit powers on, the display lights up, and all buttons respond correctly. Speed control was tested at 50 RPM and 200 RPM, with both settings running smoothly and maintaining consistent speed. All liquid vessels present hold water without leaks, and the drain tap functions correctly. The large water vessel has visible staining.
The temperature function could not be tested as the heater is not included. No further testing has been carried out.
Included Components:
- 7 stirred test vessel holders
- 5 × 1000 ml glass vessels
- 6 metal paddles (without attachments)
- Bag of additional accessories
Model: DIS 6000
£ 750.00 (ex. VAT) 1 in stock
Prior PX033 Compound Microscope W/ PaxCam EDU
ITEM-49235
Prior PX033 Compound Microscope with PaxCam EDU
This item was removed from a university laboratory where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition.
The PaxCam EDU camera could not be tested as the power supply unit is not
included.
Includes:
- Dust cover
- Spare fuses
- PaxCam EDU PX-CM-EDU (Serial No. 7020053)
- 2 × WF 10x/22 Eyepieces
- E Plan 4x/0.10 Objective
- E Plan 10x/0.25 Objective
- E Plan 40x/0.65 Objective
- E Plan 100x/1.25 Oil Objective
- USB cable for PaxCam
- Operation instructions
£ 750.00 (ex. VAT) 1 in stock
Sanyo MCO-18AIC(UV) CO2 Incubator Lab
ITEM-46523
Sanyo MCO-18AIC(UV) CO2 Incubator Lab
This item was removed from a facility where it was surplus to requirement.
The unit powers up and is in good working order.
It is in reasonably poor cosmetic condition.
£ 750.00 (ex. VAT) 1 in stock
Sanyo CO2 Incubator MCO-18AIC (UV) Lab
ITEM-47673
Sanyo CO2 Incubator MCO-18AIC (UV) Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order.
It is in good cosmetic condition.
NEW ITEM
NEW ITEM
£ 750.00 (ex. VAT) 4 in stock
Mettler Toledo E4 Pipette Multi E8-1200XLS+ Lab
ITEM-52663
Mettler Toledo E4 Pipette Multi E8-1200XLS+ Lab
This item was removed from a facility where it was surplus to requirement.
It is brand new in its original packaging.
£ 750.00 (ex. VAT) 1 in stock
Grant XUB5 Digital Ultrasonic Water Bath Lab
ITEM-51360
Grant XUB5 Digital Ultrasonic Water Bath
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 750.00 (ex. VAT) 1 in stock
UVP UV/White Transilluminator Imaging System & Camera TMW-20 PN 95-0145-05 Lab
ITEM-31863
UVP UV/White Transilluminator Imaging System & Camera TMW-20 PN 95-0145-05
This item was removed from a university lab where it was surplus to requirements.
The system powers up and is in good cosmetic condition with minor marks from use.
It is in full working order.
Included with it is;
1x Canon Powershot G10 Digital Camera
S/N: 7188100663
£ 750.00 (ex. VAT) 1 in stock
Applied Biosciences 7900HT Fast Real-Time PCR Complete System Lab
ITEM-41491
Applied Biosciences 7900 HT Fast Real-Time PCR Complete System Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Includes:
- 16A 1Phase cable
£ 750.00 (ex. VAT) 1 in stock
Anritsu Pulse Pattern Generator MP1763B & Anritsu Error Detector MP1764A Lab
ITEM-25567
Anritsu Pulse Pattern Generator MP1763B & Anritsu Error Detector MP1764A
These units were removed from a university lab where they were surplus to requirements.
Both units power up but the Pattern generator is showing "INTERNAL CLOCK (OPTION.01)". We are told this is just because they are not linked up. We unfortunately do not have the connecting leads.
They are in good cosmetic condition with minor marks from use.
1x Anritsu Error Detector MP1764A
Model. M06340
1x Anritsu Pulse Pattern Generator MP1763B
Model. M06940
£ 750.00 (ex. VAT) 1 in stock
Bright Refrigerated Cryostat Microtome OTF/AS Lab
ITEM-31880
Bright Refrigerated Cryostat Microtome OTF/AS
This was removed from a university lab where it was surplus to requirement.
The unit powers up and is in good working order.
It is in good cosmetic condition with minor marks from use.
£ 750.00 (ex. VAT) 1 in stock
Eppendorf A-2-DWP Swinging Bucket Rotor Lab
ITEM-46180
Eppendorf A-2-DWP Swinging Bucket Rotor Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition, we have not tested it at our facility.
Specifiactions;
- Capacity: 2 x deep-well plates
- Max RPM: 3700
- Compatible Models: 5804/5804R/5810/5810R
£ 750.00 (ex. VAT) 1 in stock
Sanyo MCO-17AI CO2 Incubator Lab
ITEM-46522
Sanyo MCO-17AI CO2 Incubator
This item was removed from a university laboratory where it was surplus to requirements.
The unit powers up and is in good working order.
It is in reasonably good cosmetic condition, although the door handle has snapped off. This does not affect its functionality.
£ 750.00 (ex. VAT) 1 in stock
Heraeus Heracell 150 CO2 Incubator Lab
ITEM-46576
Heraeus Heracell 150 CO2 Incubator
This item was removed from a university where it was surplus to requirements.
The unit powers up and is in good working order (thermometer not included).
It is in good cosmetic condition but will require a replacement screw-in type CO2 filter, as the original has a broken end.
The unit was successfully tested using a filter from another incubator.
Model: Heracell 150
£ 750.00 (ex. VAT) 1 in stock
Sanyo MCO-18AIC CO2 Incubator Lab
ITEM-46521
Sanyo MCO-18AIC CO2 Incubator Lab
This item was removed from a facility where it was surplus to requirement.
The unit powers up and is in good working order.
It is in good cosmetic condition.
£ 750.00 (ex. VAT) 1 in stock
RS Components Stainless Steel Vacuum Bellows UHV Ultra-High Vacuum
ITEM-50220
Stainless Steel Vacuum Bellows - RS Components
This item was removed from a facility where it was surplus to requiremet.
It is in good cosmetic condition and remains untested.
£ 750.00 (ex. VAT) 1 in stock
GE SuperFrac Fraction Collector Lab
ITEM-49996
GE SuperFrac Fraction Collector Lab
This system was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Please note; There is no PC or Software include.
£ 750.00 (ex. VAT) 1 in stock
Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810
ITEM-37249
Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810
This item was removed from a university where it was surplus to requirement.
It is in good, used cosmetic condition.
Specifications:
- Type: 2-in-1 Fixed Angle and Swinging Bucket Rotor
- Max RCF: 3,114 x g (Fixed Angle), 3,490 x g (Swinging Bucket)
- Radius: 116/37 mm Fixed Angle, 130/42 mm Swinging Bucket
- Angle: 45° Fixed, 12 to 87° Swinging Bucket
- Capacity: 8 x 15 mL (Fixed Angle), 8 x 10 mL (Swinging Bucket)
- Max Speed: 300 to 4,900 rpm, adjustable in increments of 100 rpm
£ 750.00 (ex. VAT) 1 in stock
Woodway PPS 70 med-1 Treadmill Ergometer
ITEM-50500
Woodway PPS 70 Med Treadmill Ergometer
This item was removed from a university facility where it was surplus to requirements.
The treadmill powers on and is in good overall cosmetic condition with minimal wear.
The previous owner reported that the treadmill is fully working but will very occasionally switch itself off and require a restart. This happens infrequently, sometimes with months between occurrences.
We found no issues in testing.
The treadmill has been serviced annually, with the most recent service carried out in June 2025.
Includes:
Treadmill unit
Integrated control panel
Specifications:
Model: PPS 70 Med-I
Serial Number: 12101 0208
Min Speed: 0 km/h
Max Speed: 20 km/h
Min Incline: 0%
Max Incline: 20%Woodway PPS Med 70 Treadmill Ergometer
£ 750.00 (ex. VAT) 1 in stock
Applied Biosystems 7500 Fast Real-Time PCR System
ITEM-54237
Applied Biosystems 7500 Fast Real-Time PCR System
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Last Service: 28/10/2021
£ 750.00 (ex. VAT) 1 in stock
Hewlett Packard E4426B ESG-AP Series Signal Generator
ITEM-53840
Hewlett Packard E4426B ESG-AP Series Signal Generator
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
- Firmware revision: B.03.60
- Firmware date: November 17 2000
- Total hours on: 54739.4
- Total hours display has been on: 45681.9
- Total power cycles: 372
- Attenuator cycles: 1107770
£ 750.00 (ex. VAT) 1 in stock
Applied Biosystems 7900HT Sequence Detection System RT qPCR
ITEM-53819
Applied Biosystems 7900HT Sequence Detection System RT qPCR
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 750.00 (ex. VAT) 1 in stock
Drager X-am 8000 Multi Gas Detector with CO₂/H₂S/NH₃/NO Sensors
ITEM-49563
Drager X-am 8000 Multi Gas Detector with CO₂/H₂S/NH₃/NO Sensors
This item is sold on behalf of a client. It is surplus to requirement.
It is In full working order, purchased new in 2021.
Includes:
- CO₂ sensor
- H₂S sensor
- NH₃ sensor
- NO sensor
It is available for collection from Preston UK.
The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.
£ 750.00 (ex. VAT) 1 in stock
Beckman DU 520 Central Purpose UV/Vis Spectrophotometer Lab
ITEM-54917
Beckman DU 520 Central Purpose UV/Vis Spectrophotometer Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Perkin Elmer UV/VIS Lambda 40 Spectrometer Lab
ITEM-37946
Perkin Elmer UV/VIS Lambda 40 Spectrometer
This item was removed from a university laboratory where it was surplus to requirements.
The unit powers on but is displaying "LAMBDA 40 1.20 BUSY" and failing to proceed past this screen. The problem may be related to the 'Lamp energy attenuator', as indicated in the manual. Further functionality remains untested. Therefore, it is listed as Spares/Repair.
Includes:
- 1 x Report Builder User's Guide
- 1 x Installation, Maintenance
- 1 x Operation and Parameter Description
- 1 x UV WinLab Operation Guide
- 1 x UV WinLab Tutorials
- 1 x UK KinLab Software Guide
- Power cable
Model: Lambda 40
£ 750.00 (ex. VAT) 1 in stock
Coherent Enterprise II Model ENTCII-653 Class 4 Laser w/ Power Supply Lab
ITEM-55544
Coherent Enterprise II Model ENTCII-653 Class 4 Laser w/ Power Supply Lab
This system was removed from a facility where it was surplus to requirement.
The unit is in good cosmetic condition. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.
£ 750.00 (ex. VAT) 1 in stock
12 x Hanwell IceSpy Series NP3000 Temperature Sensor Lab
ITEM-55380
12 x Hanwell IceSpy Series NP3000 Temperature Sensor Lab
This lot was removed from a facility where it was surplus to requirement.
None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.
They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.
The units have not been tested at all.
£ 750.00 (ex. VAT) 1 in stock
Sorvall SLA-3000 Superlite Centrifuge Rotor 12000RPM Lab
ITEM-55361
Sorvall SLA-3000 Superlite Centrifuge Rotor 12000RPM Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition with no signs damage present.
- Rotor Type Fixed-angle
- Material Aluminum
- Capacity 6 × 500 mL
- Maximum Speed 12,000 rpm
- Maximum RCF 24,336 × g
- Minimum RCF 6,337 × g
- Tube Dimensions 70 × 190 mm
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Illumina NextSeq 500 DNA Sequencer Lab
ITEM-54253
Illumina NextSeq 500 DNA Sequencer
This item was removed from a facility where it was surplus to requirement.
The unit powers on, however, the system is password locked.
Due to this, we were unable to test the unit further and it is therefore being sold for spares or repair.
£ 750.00 (ex. VAT) 1 in stock
Scanbur Scantainer Cabinet Model 50-SCNT-1-110 Lab Animal Welfare
ITEM-42844
Scanbur Scantainer Cabinet Model 50-SCNT-1-110
This item was removed from a university laboratory where it was surplus to requirements.
The cabinet powers on with the fan running. Airflow is adjustable via the control dial, and air was observed being drawn upwards to the top duct during testing.
The dials display ambient temperature and relative humidity. However, the “Insufficient Flow” warning light illuminated when the fan speed was turned to half speed and lower.—likely due to a blocked or saturated inlet filter on the bottom panel.
No further functionality testing was conducted.
Includes:
- 5 internal shelves (138 x 43cm)
- 4 lockable castors
- Integrated fan system
- Flange for optional extraction duct
Model: 50-SCNT-1-110
Cabinet Serial No. 08066
Extractor Serial No. 08079
£ 750.00 (ex. VAT) 1 in stock
Nuaire DH Autoflow NU-5500E CO2 Air-Jacketed Incubator Lab
ITEM-49731
Nuaire DH Autoflow CO2 Air-Jacketed Incubator Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order.
It is in good cosmetic condition.
It was last serviced in December 2024.
£ 750.00 (ex. VAT) 1 in stock
ESCO CelCulture CCL–050B-8 CO2 Laboratory Incubator Lab
ITEM-31295
ESCO CelCulture CCL–050B-8 CO2 Laboratory Incubator
This was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in full working order.
It is in good cosmetic condition with minor marks.
£ 750.00 (ex. VAT) 1 in stock
Kedee Vacuum Tissue Processor KD-TS6B Lab
ITEM-20666
This Kedee Vacuum Tissue Processor KD-TS6B was removed from a university where it was surplus to requirement.
Model: KD-TS6B
Serial#: B97032
Date: 2015-01
The item is in reasonable cosmetic condition and it powers on and is in good working order. Both motors are functional.
Touch screen responsive.
£ 750.00 (ex. VAT) 1 in stock
Boxer Front Loading Laboratory Steam Sterilisation Autoclave 200/35LR Lab
ITEM-18169
This Boxer Front Loading Laboratory Steam Sterilisation Autoclave 200/35LR was removed from a university lab where it was surplus to requirements.
Autoclave has now been fully tested by a technician and confirmed to be fully working.
The only recommendation is that the safety valve is replaced prior to use. A brand new one should be fitted on installation by the new user.
Internal dimensions:-
Depth - 41cm
Width - 30cm
Height - 30cm
Holes size on tray - 21mm
£ 750.00 (ex. VAT) 1 in stock
Olympus U-LH100HG Microscope Lamp
ITEM-41428
Olympus U-LH100HG Microscope Lamp
This item was removed from a university lab where it was surplus to requirement.
The unit is in good cosmetic condition.
The lamp both power up fine. (tested with an in-house power supply)
We cannot confirm how long the lamp has been used, as the timer was reset before we received the item.
£ 750.00 (ex. VAT) 1 in stock
Corbett Robotics CAS1200 Liquid Handling System
ITEM-45135
Corbett Robotics CAS-1200 Liquid Handling System
This item was removed from a university laboratory where it was surplus to requirements.
The system powers on and is in good cosmetic condition.
Includes:
- Manual
- Model: CAS-1200
£ 750.00 (ex. VAT) 1 in stock
Sanyo MCO-17AI CO2 Incubator Lab
ITEM-44771
Sanyo MCO-17AI CO2 Incubator Lab
This item was removed from a university lab where it was surplus to requirement.
The unit powers up and is in good working order.
It is in good cosmetic condition.
Specifications;
- Model: MCO-17AI
- Serial#: 90100724
£ 750.00 (ex. VAT) 1 in stock
Scanbur Scantainer Cabinet Model 50-SCNT-1-110 - Animal Welfare Lab
ITEM-42841
Scanbur Scantainer Cabinet Model 50-SCNT-1-110
This item was removed from a university laboratory where it was surplus to requirements.
The cabinet powers on with the fan running. Airflow is adjustable via the control dial, and air was observed being drawn upwards to the top duct during testing.
The dials display ambient temperature and relative humidity. However, the “Insufficient Flow” warning light remained illuminated even at maximum fan speed—likely due to a blocked or saturated inlet filter on the bottom panel.
No further functionality testing was conducted.
Includes:
- 5 internal shelves (138 x 43cm)
- 4 lockable castors
- Integrated fan system
- Flange for optional extraction duct
Model: 50-SCNT-1-110
Cabinet Serial No.: 08064
Extractor Serial No.: 08075
£ 750.00 (ex. VAT) 1 in stock
OHAUS Frontier FC5706 Benchtop Centrifuge w/ OHAUS 21/490 Rotor Lab
ITEM-53126
OHAUS Frontier FC5706 Benchtop Centrifuge w/ OHAUS 21/490 Rotor Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Includes;
- OHAUS 21/490 Rotor 6000RPM
- Frontier Centrifuge FC5706 Instruction Manual
- Frontier Centrifuge User Guide
£ 750.00 (ex. VAT) 1 in stock
Showa Optronics Co Laser System With Olympus FV10-COMB Lab
ITEM-37855
Showa Optronics Co Laser System With Olympus FV10-COMB
This system was removed from a university lab where it was surplus to requirements.
The system powers up but has not been tested further for safety reasons.
Included are the following;
Olympus FV10-COMB
Showa Optronics Co GLS3135 Laser
Showa Optronics Co GLS3135 PSU
Showa Optronics Co GLG7000
Melles Griot 05-LHP-991
£ 750.00 (ex. VAT) 1 in stock
Leica DMIL Inverted Microscope Type 090-135.001
ITEM-41191
Leica DMIL Inverted Microscope Type 090-135.001
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition with marks from use.
No objectives included.
The microscope features:
2 x Leica 10X/18 Eyepiece
£ 750.00 (ex. VAT) 1 in stock
Kendro Heraeus HERAcell 150 CO2 Incubator Lab
ITEM-47519
Kendro Heraeus HERAcell 150 CO2 Incubator
This item was removed from a university laboratory where it was surplus to requirements.
The unit powers up and is in good working order. The interior and shelving show signs of corrosion, and the door latch mechanism is missing from the glass door.
Model: HERAcell 150
Items 1701 to 1750 of 3558