C1 Electronics Sade-P2 Automatic Tablet CheckWeigher

This item was removed from a university laboratory where it was surplus to requirements.

It powers on but displays a “Zero Failure” message immediately upon startup, accompanied by an alarm. This message cannot be cleared, and the unit cannot proceed to operation.

Therefore, it is listed as Spares/Repair.

It is in reasonably good cosmetic condition.

Eurotherm Process Automation System with TCS Tactician T1000 & Components

This was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition though the access panel of the switchboard has snapped all its hinges. These will need replacing to secure the unit.

We were unable to power the unit or the TCS Tactician T1000 Controller It was not tested further. The cabinet is filled with electrical components.

Dynamic Gastric Custom Made Model

This item was removed from a university lab where it was surplus to requirements.

This custom-made Dynamic Gastric Model exhibits poor cosmetic condition. It cannot be powered on or tested due to a visual PAT failure and exposed wiring.

The Dynamic Gastric Model (DGM) is a bench-top computer controlled in vitro system that simulates digestion in the human stomach. DGM allows accurate prediction and understanding of the behaviour of foods or drug preparations within the human gut during digestion in real time.

Brema Laboratory Ice Flaker Machine Model GB 1555 A

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition. However, it is leaking water due to a broken junction in the overflow-to-waste pipe.

As a result, it is listed as spares or repair.

Please note: This item was previously used in a laboratory setting and is not suitable for use in commercial catering. It should be used for laboratory purposes only.

Includes:

• Operating manual

Internal dimensions: D46.5 × W67.5 × H57 cm

Typhoon Trio+ Variable Mode Imager

This item was removed from a university lab where it was surplus to requirement.

It has not been tested due to exposed wiring, and is sold as Spares/Repair.

Aeromatic Fielder MP-Micro Fluid Bed Dryer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on.

Therefore, we are unable to test it further at our facility, and it's listed as Spares/Repair.

The item also contains various Assembling Dryer/ Top Sprayer Containers and cables, as seen at the end of the slide.

Specifications;

• Model: MP-MICRO
• Serial#: 04012
• Date: FEB 04



This New Brunswick Innova Type 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up and heats, but does not cool or shake.

It is sold for spares/repairs.

This New Brunswick Innova 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up but does not shake. The heating and cooling functions work.

It is in reasonably good cosmetic condition with minor marks.

New Brunswick Innova Model 4330 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit heats but does not cool. The shaking works, but requires maintenance.

It is sold for spares/repairs.

Xenogen Ivis 100 Imaging System Microscope - XGI-8, XRH-2 Lab

This system was removed from a university lab where it was surplus to requirements.

We have powered everything up and the system is in good cosmetic condition with marks from use.

The lab informed us that it has not been used for several years but was in working order when last used. The calibrated light source has now been removed so we are now selling for spares/repairs.

Included as part of the Ivis 100 are;

1 x IGC Polycold Systems Inc, Cryotiger Compressor.

1 x Spectral Instruments Inc, 600 Series CCD Camera Controller.

1 x Spectral Instruments Inc, Refrigeration Line Heater.

1 x Xenogen Corporation, XGI-8 gas Anesthesia System.

1 x DELL PC & Monitor, Running Windows 2000 Professional.

Instruction Manuals & Xenogen Living Image Version 2.20 Discs included.

Instruction Manuals & Xenogen Living Image Version 2.20 Discs included.

New Brunswick Scientific Innova CO-170 Lab

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in fairly poor cosmetic condition with some rust, it has been temperature-tested. (thermometer not included)

The unit developed a back-light fault in the screen during CO2 testing. It is sold as Spares/Repair.

Eppendorf 5810R BenchTop Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in good cosmetic condition and powers on.

During testing, it failed to reach its maximum specified temperature of 40ºC.

Due to these issues stated above, this centrifuge is being sold as spares or repairs.

Agilent 2100 G2939A Bioanalyzer System & Accessories Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in good cosmetic condition and powers on, however it could not be fully tested as two channels show high leakage currents.

Therefore, it is being sold as spares or repair.

Includes:

• 1 box x High Sensitivity DNA Chips (5 in box) – expires Jan 2026
• 1 box x High Sensitivity DNA Chips (10 in box) – expires Jan 2026
• 1 box x Electrode Cleaners (5 in box)
• 1 box x Chip Priming Station
• 1 x Bayonet Electrode Cartridge (in blue case)
• 1 box x 11 Syringe Kits
• 1 box containing Test Chip Kit/Electrode/Diode Test Chip & USB 2.0 Cable

Model: 2100 Bioanalyzer

Serial No.: DE13805731

Product No.: G2938C

Carl Zeiss Surgical Microscope + Metz NAG 80 VA Controller

This item was removed from a university laboratory where it was surplus to requirements.

The item is in reasonably good cosmetic condition; however, it cannot be powered on due to the absence of a plug and a split in the flex exposing the internal wires.

It is therefore sold as spares or repair.

Includes:

• Carl Zeiss Surgical Microscope
• Metz NAG 80 VA Controller

Integrated BMS Jet Nozzle Test Facility -CP3 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility. The unit has no power cable.

Therefore, it is listed as Spares/Repair.

Includes operation keys.

Door key not included but can be opened with a standard control cabinet key.

WEG CFW -11 Venture Inverter Control Box Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility.

The key is not included but can be opened with a standard control cabinet key.

Includes manual.

The unit has no cable so is sold for spares/repairs

Julabo FL300 Recirculating Chiller – Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit shows minimal wear, with both of the top catches on the lid broken; this does not affect physical operation of the doors.

The cable is damaged, and the unit will not power on, so it is being sold for spares or repair.

Model: FL300

Milestone Ethos plus 2 Microwave Solvent Extraction Labstation

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition, with the primary unit (Milestone Ethos plus 2) and PC Set-Up turning on, however, there is no power in the LabTerminal 800 Controller.

The system is sold for spares/repairs.

-1x Milestone Microwave Laboratory Systems LabTerminal 800 Controller

1x easywave chip card for the controller

S/N- 0205722

-2x Rotor' for microwave

- Relevant vessels and safety shields for rotors

-2x ATC-FO sensors for microwave

-2x Torque wrenches for rotor

-2x Extraction Pipes

1x Monitor (IIyama Prolite B2206WS) and Dell Tower Optiplex GX620

Includes: Pipette tracker v3.3 Software

Nikon Diaphot 300 Microscope *Condenser Removed*

This microscope was removed from a university lab where it was surplus to requirements.

All mechanical elements are in good working order. The unit does not include the power supply or condenser therefore we are unable to perform any other tests. It is in good cosmetic condition with minor marks.

As stated in the title the condenser is not included.

It is made up of the following modules;

Nikon ND2 Filter

Nikon ND4 Filter

Nikon CFWN 10x/20 Eyepiece x 2

Nikon 100w Mercury Lamphouse LH-M100C-1

Nikon Halogen 12V 100W Microscope Lamp

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm

This was removed from a university lab where it was surplus to requirements.

The unit powers up but half of the keypad no longer works. It is sold for spares/repairs.

This GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System was removed from a university lab where it was surplus to requirements.

The microscope focus motor/Z-Drive has been removed from this unit.

We have removed the microscope focus motor/Z-Drive from this system. It is sold for spares/repairs.

Included in the system are;

1x GE IN Cell Analyzer 1000:

Dims: L85cm W70cm H70cm

The unit is in good cosmetic condition.

When connected up to the power supply we could not hear the unit power on.

Inside the unit it appears have been tampered with as there are several cables and connector cables not attached to anything the EARTH cable is also not attached. A circuit board has been removed from the unit. this may explain why we could not get the unit powered up.

1x GE IN Cell Analyser 1000 Kinetic OZ Enabled

Model No. 28-4051-29

System No. 1316043

The unit powers on and is in good cosmetic condition.

The fans are working, they can be heard powering up immediately once the unit is powered on.

1x GE IN Cell Analyser 1000 ENDPNT OZ Enabled

Model No. 28-4051-28

System No. 1358008

The unit powers on and is in good cosmetic condition. The unit appears to have been stripped only 1x HP Workstation 6200 PC and 1x MVP Series power supply were still inside it.

The Kinetic OZ Enabled unit appears to be complete with an Optigrid light imaging system. We have fitted the GE IN Cell Power supply back into the rack unit where it should be housed.

EMKA Keys:

Model 2233X

2x keys for GE IN Cell Analyser 1000 ENDPNT OZ Enabled

2x keys for the GE IN Cell Analyser Kinetic OZ Enabled

All 4 keys are in good cosmetic condition and open and lock both the Kinetic and the ENDPNT units.

We did not connect up the GE IN Cell 1000 to the GE 1000 Kinetic OZ Enabled unit as one of the communication cable connections at the back of the rack has come away and will need to be fixed back on. Without this being fixed we do not believe the systems to be aware of each other.

1x Optigrid Light Imaging System:

Model QIOPTIQ

The unit powers on and is in good cosmetic condition.

1x Xenon ARC Lamp Power supply w 2x keys:

Type 6

Part No. 56409187

The unit powers on and is in good cosmetic condition. The keys do not fit in the barrel well and do not turn. The LCD screen is working and reads clearly.

Keys:

model No. 901

The units are in good cosmetic condition

2x MVP Series Power supplies. ( 1x in each rack unit)

Model Nos. MP8-3Q-1L-00

Both units power on and are in good cosmetic condition. There is dust around and on both units from general use.

1x Hamilton power supply

Model No. 231352/00

The unit powered on and is in good cosmetic condition.

2x APC rack PDU

The units power on and are in good cosmetic condition.

1x GE cO2 Controller:

Ser No. 1352436

The unit powers on and is in good cosmetic condition. The LCD screen is working and reads clearly. All dials and switches appear responsive to the unit.

2x Hewlett Packard PC's: HP workstation xw6200:

The units both power on and are in good cosmetic condition.

There is some dust around the units from general use.

Programs on PC:

•Overlord 2

Version 2.1.0.0

•IN Cell Analyser 1000 3.5

•IN Cell Analyser 1000 3.6

The program is password protected and we could not get past this window to access other parts of the program.

'Shutter Counter 1984048'.

3 x Low Voltage Computer Cables:

•28-4060-63 Umbellcal Axis 0734

•28-4060-66 0647

•28-4060-68 Umbellcal Hamilton 0738

1x Xenon lamp Bulb:

Model OSRAM XBO 100W OFR

The box had been opened. We cannot confirm if this lamp has been used. The unit was in good cosmetic condition.

This was removed from a university lab where it was surplus to requirements.

The unit powers up but a warning light flashes. It was not tested further.

It is sold for spares/repairs

Tuttnauer 5050 ELV-D 110L Laboratory Autoclave Spares/Repair

This item was removed from a university where it was surplus to requirement.

This item is in poor cosmetic condition and is sold as Spares/Repair.

The lid of the item is not fixed, and the internal pump has been removed.

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

ITEM-05085 Multi-PSU Blue Box *Unknown*

ITEM-05176 NUNC Labtop Cooler Cat: 355501 (-20 C) Scientific Laboratory

ITEM-05009 Oertling TP41 Top Pan Balance Scales

ITEM-04968 Stanton D40T Scales

ITEM-04596 Heraeus Instruments Biofuge Primo Centrifuge Damaged Lid

ITEM-10422 Brava Juice Blender

ITEM-05784 Techne Tecam TU-15 Tempunit Heater/Circulator

ITEM-05138 Microscope Handle/Stand

ITEM-03607 IKA Labortechnic hotplate and stirrer RCT Basic.

ITEM-10939 Unknown Medical Equipment

ITEM-05783 Grant Circulator Heater KA/TA for Laboratory Water Bath

ITEM-12684 Luckham Orbital Platform Shaker Rocker Mixing Lab

ITEM-14036 John Watts Type 586 Grinding Wheel Dressing Tool

ITEM-09555 Grant QBD2

ITEM-02500 Digital Data Formatting 53-150

ITEM-05479 Retro Smiths Manual Timer

ITEM-07327 Distron Geiger - Muller Counter Tube

ITEM-13055 Variomag Maxi Direct Magnetic Stirrer Lab Shaking Equipment

ITEM-08581 Digitron Model 3750TH

ITEM-14303 Ascom Digilarm Portable Digital Alarming Bell

ITEM-14189 PIFCO Vintage Electric Body Massager Personal Care

ITEM-07161 Techne Dri-Block DB-3 Dry Block Heater Laboratory Lab - Spares Repairs

ITEM-10765 Drummond Pipet-Aid Dual Pump Filtration Unit

ITEM-14032 Eclipse PS51 Piercing Saw Fixed Frame Other Tools

ITEM-09490 2 x IKA Big-squid Froggy stirrers

ITEM-13058 H.J.Latham Vintage Hair Dryer

ITEM-11722 JK KMO2 Electronics Magnetic Stirrer

ITEM-14312 Veho Discovery VMS-001 USB Microscope Stand

ITEM-13134 Pipette Stand

ITEM-12686 Grant Un-Stirred Water Bath Lab Heating Equipment

ITEM-04976 Stovall Life Science Belly Dancer

ITEM-11201 Barr & Stroud EL103 LF Power Supply

ITEM-14009 Wooden Box

ITEM-05088 PL4 Recorder JJ Instruments

ITEM-13622 1x Wesco Gren Oil Can 350cc Other Workshop Equipment

ITEM-13993 Wooden Box

ITEM-05222 Thermo Digital Series SpeedVac™ Systems Heat Laboratory Scientific *Lid Is Broke

ITEM-11091 Denley Orbital Mixer Lab Stirring Equyipment

ITEM-06569 Infrared Lamp Type HP3614

ITEM-04321 fisherbrand stirrer

ITEM-11032 4x Rank Bros 100 Electronic Stirrer Control Lab Shaking Equipment

ITEM-08321 Stuart Scientific SB1 Blood Tube Rotator

ITEM-11401 2x Anatune CF-100 Benchtop Laboratory Centrifuge Vortex Robotic

ITEM-10505 Race Pedal Joy Stick IT Equipment

ITEM-04287 Job lot of 3 blood glucose monitoring system

ITEM-08323 MULTI-JOB LOT 2 pipettes

ITEM-10657 Amazon.ca Salton Vacuum Bag Sealer

ITEM-03116 Job Lot of 4 x Faulty H R Flow Inducer MHRE 4 and MHRE 100

ITEM-06311 Corning PC-351 Hot Plate Stirrer Laboratory Heating Mixing - Spares Repairs

ITEM-11287 Harvard R150424 Thermo-Circulator Controller

ITEM-05971 Mettler Toledo PL3000 Laboratory Precision Digital Balance Scales

ITEM-10534 Fisher Scientific LABOSI Power 300 Electrophoresis Power Supply

ITEM-06534 Hybaid PS 250 Electrophoresis Power Supply

ITEM-06906 Ohaus Dial-O-Gram Balance 310g Capacity Scales

ITEM-10259 Unbranded Vintage Weighing Pan Balance

ITEM-02436 Selector Unit 1694 F

ITEM-12203 Electrothermal Cat. M106 Heating Mantle Lab Heating Equipment

ITEM-06006 Developing Health Technology Portable Haemoglobin Analyzer DHT Hb 523

ITEM-12290 Electrothermal EMO100 Heating Mantle Lab Heating Equipmet

ITEM-11905 Sarstedt M-Sarpette Manual Pipette With Gilson Distriman

ITEM-12663 Single Stage BS5741 Single Gauge Regulator

ITEM-06102 Thorn DFLD 400 Lamp

ITEM-12198 Electrothermal Heating Mantle Size 950ml Lab Heating Equipment

ITEM-12205 Electrothermal EM2000/CE MK5 Heating Mantle Lab Heating Equipment

ITEM-10537 Biolab pH & Conductivity Meter Lab Equipment

ITEM-06045 Reliance Electric Gast Vacuum Pump - Faulty

ITEM-12155 GallenKamp HotPlate Magneic Stirrer Cat.SWT-315

ITEM-09248 ChemLab SS3H Hotplate Laboratory Stirrer & Digitron Meter Spares Repairs

ITEM-12175 MK V Orbital Shaker [condition: Used]

ITEM-04703 Mettler P1210 Laboratory Scale 1200G Max d=10mg Tara 0-100g

ITEM-07117 JJ Instruments Chard Recorder (Spares & Repairs)

ITEM-06089 Stuart Scientific S.M.3 Magnetic Stirrer Hotplate

ITEM-12168 Stuart Scientific Mini Orbital Shakers Lab Shaking Equipment

ITEM-06017 Syringe Pump

ITEM-07133 Mettler Toledo pH Meter - Spares / Repairs

ITEM-10533 IKA Laboratories RH Basic Stirrer Lab Shaking Equipment

ITEM-10698 Grant BT3 Block Heater Lab Heating Equipment

ITEM-10746 Voss of Maldon MAG/S 200/250 Magnetic Stirrer Lab Shaking Equipment

ITEM-10924 Fisher Brand Pump Lab Equipment (Spare Repairs)

ITEM-06172 Elix 2 Millipore Water Purification System

ITEM-06046 VWR Digital Thermometer

ITEM-04758 Laboratory Glass Filter Tube

Link Analytical eXL Model 1100-012 System

This system was removed from a university laboratory where it was surplus to requirements.

The main eXL unit initially powered on, supplied power to the monitor, and displayed startup errors (see photos), but the keyboard and mouse were unresponsive. Upon restarting, the monitor and indicator lights did not power up, although internal computer activity could still be heard. Further attempts to power cycle the system were unsuccessful.

Therefore, this system is listed as Spares/Repair.

It is in good overall cosmetic condition.

The system comprises the following:

• Link Analytical eXL
• Model: 1100-012
• Serial No.: 2917
• Link Analytical Monitor
• Model: CLR 1401
• Serial No.: 2665
• Link Analytical Keyboard
• Model: 1487
• Serial No.: 2763
• Link Analytical Mouse and Mouse Mat
• Link Analytical Printer (Epson LQ-500)
• Model: P78PA
• Serial No.: T0011258
• *Note: Printer would fail PAT due to a missing rear cover
• (Box of printer paper included)

Included Manuals:

• Link Analytical eXL System Service Manual
• Link Analytical Disk, Tape & File Sequel, Sequences, Display & Hard Copy, Genie, Video Frame Grabber
• Link Analytical Getting Started – X-Ray Analyser, System Manager, RTS-2/FLS, Auto
• Link Analytical Computer System & Electron Diffraction Pattern Analysis
• Link Analytical Analysis & Imaging
• Link Analytical Quantitative Mapping Operators Manual

Accessories and Additional Parts:

• Box of 10 floppy disks
• Labelled black 'X-Ray' cables and a grey monitor cable (collected as connected)
• 2 x Tracor Northern IPP Series II X-Ray Analyzer Operator Manuals
• 3 x Digital software disks (in blue cases – large format)
• GEMS Sensor – P/N 197093-RS (white)
• Unidentified round metal part
• Boxed metal piece labelled "Scintillator" (assy – ME 0084)
• Metal part tagged "X-Ray Source XA2-57"
• Metal part with Watec WAT-902B CCD Camera and:
• Objective lens: M Plan APO 10 SB 0.23 ∞/0 SLWD 39
• Metal piece with part number AG61-113 etched at the base
• Orange cable marked "AML J011 034"
• Black light source
• Various other cables (not compatible with the eXL)

GEM Indirect Calorimeter ISGEM319 Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonable cosmetic condition. The casing is loose and required securing with a screw, suggesting it may have been opened previously.

The item powers on, but no further testing has been conducted. The previous owner reported it as non-functional, though the specific fault is unknown.

Therefore, it is listed as Spares/Repair.

Includes:

• Pipe fittings
• Grey connector box for the pipe system