All Products

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm Lab Spares/Repairs

ITEM-34798

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm

This was removed from a university lab where it was surplus to requirements.

The unit powers up but half of the keypad no longer works. It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Pair of FluidX XTR-Single Tube Readers Lab

ITEM-34735

2 x FluidX XTR-Single Tube Reader Lab

These items were removed from a university lab where they were surplus to requirements.

Both items power up and are in good cosmetic condition.

£ 500.00 (ex. VAT) 1 in stock

Taylor-Wharton LS6000 Liquid Nitrogen Cryogenic Storage Tank

ITEM-34584

This Taylor-Wharton LS6000 Liquid Nitrogen Cryogenic Storage Tank was removed from a university lab where it was surplus to requirements.

The unit appears to be in good condition, but it has not been tested.

Last service date: 06/10/2021.

Internal dimensions: 21cm x 60cm.

Capacity: 6 racks, 6000 2ml vials.

£ 500.00 (ex. VAT) 1 in stock

Wykeham Farrance Oedometer CBR Testing Lab

ITEM-34568

This Wykeham Farrance Oedometer CBR Testing was removed from a university lab where it was surplus to requirements.

The unit powers up the hand control unit works correctly, and the hydraulic ram goes up and down freely.

It is in reasonable cosmetic condition with marks from use.

£ 500.00 (ex. VAT) 1 in stock

TQ TD1050 Steam Engine Trainer Teaching Rig Apparatus Lab

ITEM-31869

TQ TD1050 Steam Engine Trainer Teaching Apparatus Rig

This was removed from a university lab where it was surplus to requirements.

It is in full working order.

Included are;

TD1050 General Assembly

TQ165554-001

TD1050 - DTS2 Torque/Speed Display Unit

TQ160508-001

TD1050-DT1 Temperature Display

TQ165554-001

VDAS-F - VDAS Frame Mounted Version

TQ156326-009

Grosvenor Pump

Model - 5583

SN - 21278

Dynatherm Part no. 42673

SN - 13107-1

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Fujifilm FLA-3000R Fluorescent Image Analyzer Spares/Repairs

ITEM-30522

This was removed from a university lab where it was surplus to requirements.

The unit powers up but a warning light flashes. It was not tested further.

It is sold for spares/repairs

£ 500.00 (ex. VAT) 1 in stock

Varian TV 81-T Turbo Turbomolecular Pump Model 9698905M001 Lab

ITEM-30514

This Varian TV 81-T Turbo Turbomolecular Pump Model 9698905M001 was removed from a university lab where it was surplus to requirements.

The pump has been tested with a controller (not included) and is in working order, but has not been tested under a vacuum.

It is in good cosmetic condition with minor marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System Spares/Repairs

ITEM-30328

This GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System was removed from a university lab where it was surplus to requirements.

The microscope focus motor/Z-Drive has been removed from this unit.

We have removed the microscope focus motor/Z-Drive from this system. It is sold for spares/repairs.

Included in the system are;

1x GE IN Cell Analyzer 1000:

Dims: L85cm W70cm H70cm

The unit is in good cosmetic condition.

When connected up to the power supply we could not hear the unit power on.

Inside the unit it appears have been tampered with as there are several cables and connector cables not attached to anything the EARTH cable is also not attached. A circuit board has been removed from the unit. this may explain why we could not get the unit powered up.

1x GE IN Cell Analyser 1000 Kinetic OZ Enabled

Model No. 28-4051-29

System No. 1316043

The unit powers on and is in good cosmetic condition.

The fans are working, they can be heard powering up immediately once the unit is powered on.

1x GE IN Cell Analyser 1000 ENDPNT OZ Enabled

Model No. 28-4051-28

System No. 1358008

The unit powers on and is in good cosmetic condition. The unit appears to have been stripped only 1x HP Workstation 6200 PC and 1x MVP Series power supply were still inside it.

The Kinetic OZ Enabled unit appears to be complete with an Optigrid light imaging system. We have fitted the GE IN Cell Power supply back into the rack unit where it should be housed.

EMKA Keys:

Model 2233X

2x keys for GE IN Cell Analyser 1000 ENDPNT OZ Enabled

2x keys for the GE IN Cell Analyser Kinetic OZ Enabled

All 4 keys are in good cosmetic condition and open and lock both the Kinetic and the ENDPNT units.

We did not connect up the GE IN Cell 1000 to the GE 1000 Kinetic OZ Enabled unit as one of the communication cable connections at the back of the rack has come away and will need to be fixed back on. Without this being fixed we do not believe the systems to be aware of each other.

1x Optigrid Light Imaging System:

Model QIOPTIQ

The unit powers on and is in good cosmetic condition.

1x Xenon ARC Lamp Power supply w 2x keys:

Type 6

Part No. 56409187

The unit powers on and is in good cosmetic condition. The keys do not fit in the barrel well and do not turn. The LCD screen is working and reads clearly.

Keys:

model No. 901

The units are in good cosmetic condition

2x MVP Series Power supplies. ( 1x in each rack unit)

Model Nos. MP8-3Q-1L-00

Both units power on and are in good cosmetic condition. There is dust around and on both units from general use.

1x Hamilton power supply

Model No. 231352/00

The unit powered on and is in good cosmetic condition.

2x APC rack PDU

The units power on and are in good cosmetic condition.

1x GE cO2 Controller:

Ser No. 1352436

The unit powers on and is in good cosmetic condition. The LCD screen is working and reads clearly. All dials and switches appear responsive to the unit.

2x Hewlett Packard PC's: HP workstation xw6200:

The units both power on and are in good cosmetic condition.

There is some dust around the units from general use.

Programs on PC:

•Overlord 2

Version 2.1.0.0

•IN Cell Analyser 1000 3.5

•IN Cell Analyser 1000 3.6

The program is password protected and we could not get past this window to access other parts of the program.

'Shutter Counter 1984048'.

3 x Low Voltage Computer Cables:

•28-4060-63 Umbellcal Axis 0734

•28-4060-66 0647

•28-4060-68 Umbellcal Hamilton 0738

1x Xenon lamp Bulb:

Model OSRAM XBO 100W OFR

The box had been opened. We cannot confirm if this lamp has been used. The unit was in good cosmetic condition.

£ 500.00 (ex. VAT) 1 in stock

Bright Model M3500 Rotary Microtome Lab

ITEM-29829

This Bright Model M3500 Rotary Microtome was removed from a university lab where it was surplus to requirements.

The unit powers up with 2 x AA batteries (not included) and is in good working order mechanically, but has not been tested on samples.

It is in very good cosmetic condition with only minor marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-E Centrifuge Lab Spares/Repairs

ITEM-29745

Beckman Coulter Avanti J-E Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has several faults. The unit requires a new board, flash card and cooling system.

It is in good cosmeti condition with minor marks.

It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

PSL Rheotek TCB 8 Temperature Controlled Water Viscometer Bath Lab

ITEM-28205

PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath

This was removed from a university lab where it was surplus to requirements.

The unit powers up and the heating is in good working order.

Inside tank dimensions - L59 W31 H37cm

It is in good cosmetic condition with some marks from use.

£ 500.00 (ex. VAT) 1 in stock

Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E Series 6 Lab

ITEM-28195

This Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E Series 6 was removed from a university lab where it was surplus to requirements.

The item powers on with blowers and both Light & UV working.

The blower will only work when the sash is at the correct working height. This is marked on the side of the unit. When it is dropped fully the blower switches off as it should. When it is raised above the mark the windows alarm goes off as it should, until the sash is dropped back to the correct working height.

The unit starts up as it should and shows 'low' airflow initially until it builds up to the correct flow. It then raises above the correct flow and the 'HI' alarm sounds. We spoke to a service engineer and they suggested that it will just require calibrating upon installation. It will need commissioning upon installation anyway.

The lab reported that the filter has been removed.

Inside dimensions - D57.5 W118 H72cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Packard 9200 Hydrogen Generator B920000 Lab Spares/Repairs

ITEM-28161

Packard 9200 Hydrogen Generator

This was removed from a university lab where it was surplus to requirements.

We had the unit looked at by a service engineer. It is fully working but is leaking hydrogen.

It is in reasonably good cosmetic condition, but has some marks from use.

it is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Brema Laboratory Ice Flaker Machine Model - GB 1555 A Spares/Repair Lab

ITEM-28134

Brema Laboratory Ice Flaker Machine Model GB 1555 A

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition. However, it is leaking water due to a broken junction in the overflow-to-waste pipe.

As a result, it is listed as spares or repair.

Please note: This item was previously used in a laboratory setting and is not suitable for use in commercial catering. It should be used for laboratory purposes only.

Includes:

Operating manual

Internal dimensions: D46.5 × W67.5 × H57 cm

£ 500.00 (ex. VAT) 1 in stock

GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks Lab

ITEM-25464

This GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition with some marks from use. It has not been tested.

There are 6 Racks inside with drawers that hold 5ml tubes.

£ 500.00 (ex. VAT) 1 in stock

AT Delta-T Logger System with Software & Accessories Lab

ITEM-25021

This was removed from a university lab where it was surplus to requirements.

The system is in reasonable cosmetic condition. There are stains and other marks along the edges and surface. The atmospheric temperature & humidity probe is dented.

The item is untested as it wasn't supplied with a PSU.

Also included are the following:

1x Delta-T Devices atmospheric temperature & humidity probe

S/N: RHAI-077

1x Delta-T PC software type LS2

Version 1.04

1x Desiccant Pack

1x DE-9 cable

1x Tutorial Kit

1x Spares & Accessory Pack

3x Component part (EMC directive) 5m

5x Temperature Probes User Manual

1x Quantum Sensor User Manual

1x Delta-T Devices Data Loggers, Sensors & Systems

1x Delta-T Devices Plant Science & Solar Radiation Studies

1x Delta-T Devices Image Analysis Systems

1x Delta-T Logger User Manual Version 2.01

£ 500.00 (ex. VAT) 1 in stock

Parr Isoperibol Calorimeter 1261EA w/ Power Supply & Printer Lab Spares/Repairs

ITEM-24968

This Parr Isoperibol Calorimeter 240 was removed from a university lab where it was surplus to requirements.

The item is in reasonable cosmetic condition but has plenty of marks from use and age.

The item powered on fine and we could interact with the control panel without issue. We attempted to run a test print and were met with Error 3800. We are told this is due to the O2 requirement and is not a fault with the system.

The system was serviced in 2020 not long before it came to us.

We were unable to test it further.

Also included are the following:

1x Parr 1755 Printer

1x Parr/Star Power Supply

Model: AD8340

£ 500.00 (ex. VAT) 1 in stock

Irori AccuTag 100 Scanning Station Model: At-100-CS-CE Lab

ITEM-24838

This Irori AccuTag 100 Scanning Station Model: At-100-CS-CE was removed from a university lab where it was surplus to requirements.

The item is in reasonable cosmetic condition. There are scratches/dents on the surface, along with stains. The accessories have been used and thus have broken seals.

The item was plugged in, but there wasn't any clear indication it had powered on. We were unable to test it further without a PC connection.

Also included are the following:

1x AccuTag Synthesis Manager Version 1.0

1x AccuTag Synthesis Manager Version 2.26

12x Irori Radio Frequency Tag

1x PSU

1x DE-9 cable

£ 500.00 (ex. VAT) 1 in stock

Soxtec Avanti 2050 Auto Fat Extraction System with Drive Unit Lab

ITEM-24537

This Soxtec Avanti 2050 Auto Fat Extraction System was removed from a university lab where it was surplus to requirements.

Included are;

1 x Foss Tecator 2050 Soxtec Avanti Auto Extraction Unit

Part no. 10007330

1 x Foss Tecator 2050 Drive Unit

Part no. 10007338

The item powers on with the drive unit supplying power and controlling the extraction unit. It was not tested further. It seems to be missing a control unit.

The item is in reasonably good cosmetic condition with some marks from use.

£ 500.00 (ex. VAT) 1 in stock

Foss Kjeltec 2100 Distillation Unit Lab

ITEM-24526

This Foss Kjeltec 2100 Distillation Unit was removed from a university lab where it was surplus to requirements.

The unit powers up but is a little noisy. It looks like it should be used with a donor flask of liquid, that distils to another flask.

The settings are functioning and can be altered and set by holding down the control button, whilst setting heat and time parameters with the other two buttons.

The distillation unit provides automatic/semi-automatic distillation for protein analysis using the global reference method.

It is in good cosmetic condition but has some marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific VersaCool Refrigerated Circulating Water Bath Spares/Repair

ITEM-24423

Thermo Scientific VersaCool Refrigerated Circulating Water Bath Spares/Repair

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it failed to load past the loading screen.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Nikon Microphot-FXA Fluorescence Microscope with HP-10101AF PSU & 4 x Objectives

ITEM-24299

This Nikon Microphot-FXA Fluorescence Microscope was removed from a university lab where it was surplus to requirements.

The PSU is missing so we were unable to power up the Microscope. It requires a Nikon PSM-4A. The power supply unit for the mercury lamp is present. The PSU is working but the bulb needs to be replaced.

The system is in reasonably good cosmetic condition with marks from use.

It has;

2x Nikon FX-350X 35mm film cameras attached via Nikon mounts.

1 x SOFT RTS 25.4 2mp slider with data lead.

1 x NIKON 4/0.10

1 x NIKON FLUOR 20 0.75 160/0.17

1 x NIKON FLUOR 40 0.85 160/0.11-0.23

1 x NIKON FLUOR 100 / 1.30 OIL 160/0.17

2 x CFWN D10 X/20

There is a PC with ISMOL Software & relevant PCI cards for connecting everything.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Priorclave EV100 Top-Loader Autoclave Lab Spares/Repairs

ITEM-21246

This was removed from a university lab where it was surplus to requirements.

The system has a main board fault. It does not heat up as a result.

It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Biotage SP1 Flash Chromatography System Lab

ITEM-21097

This Biotage SP1 Flash Chromatography System was removed from a university lab where it was surplus to requirements.

The unit powers up but the monitor is faulty. We connected it to an external monitor and were able to power up the system and access the software. The battery for the motherboard with likely need replacing at some point.

The system is comprised of the following modules.

1 x Biotage SPXE 10810016;

1 x Ecom Fixed Wavelength UV Detector ;

1 x Biotage SP1 System & Monitor.

£ 500.00 (ex. VAT) 2 in stock

Ion Torrent Personal Genome Machine Model - 508-U001 Lab

ITEM-20400

Ion Torrent Personal Genome Machine Model - 508-U001

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further at our facility. It is in reasonably good cosmetic condition with marks.

Included are;

1 x Model - 508-U001

11C082420

Comes with:-

Honeywell Barcode Scanner Model - MS9520

Bottle Stand

Phone/Ethernet type cable

£ 500.00 (ex. VAT) 1 in stock

VG Scientific Wien Mass Filter for Ion Beam Filtering UHV Lab

ITEM-19542

VG Scientific Wien Mass Filter for Ion Beam Filtering UHV

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition but has not been tested.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

CyBio CyBi-Well Automated Simultaneous Pipettor System - Spares/Repair Lab

ITEM-08413

CyBio CyBi-Well Automated Simultaneous Pipettor System – Spares/Repair Lab

This system was removed from a university laboratory where it was surplus to requirements.

The system powers on and is in good cosmetic condition. However, we were unable to get the PC to communicate with the pipette dispenser. The PC includes CyBio software, and no password is required.

This unit is being sold as spares or repair due to the communication issue.

Includes:

DW-CyBi-Well 96/250µl head
Integrated PC with installed software

Model: OL3391-750-25

Serial No.: OL3391 7 7008

Year: 2015

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Tuttnauer 5050 ELV-D 110L Laboratory Autoclave Spares/Repair

ITEM-08317

Tuttnauer 5050 ELV-D 110L Laboratory Autoclave Spares/Repair

This item was removed from a university where it was surplus to requirement.

This item is in poor cosmetic condition and is sold as Spares/Repair.

The lid of the item is not fixed, and the internal pump has been removed.

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Perkin Elmer Fusion Packard Microplate Reader Analyser A153601 lab

ITEM-04960

This Perkin Elmer Fusion Packard Microplate Reader Analyser A153601 was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in working order outside. The PC does continually come up with a server busy message, and we have been unable to resolve that, but there is a workaround.

The instrument is functioning fine and can run samples smoothly.

Failed PMT Dark Count (Photon Counting) - Failed due to high thermal electron current in the PMT due to high voltage in this mode. This will not affect the functionality of the instrument.

Passed PMT Dark (Charge Integration) and LED Control.

Server Busy message - This action cannot be complete because the other program is busy. Choose ‘Switch to’ to activate the busy program and correct the problem.

It is in very good cosmetic condition with only minor marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sutter Instrument Co. Model P-87 Flaming / Brown Micropipette Puller Lab

ITEM-37821

Sutter Instrument Co. Model P-87 Flaming / Brown Micropipette Puller

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. However, the side Dale RR-25 25II power resistor produces significant heat and a strong burning smell, and the unit does not heat the capillary puller.

Therefore, it is listed as spares or repair.

£ 500.00 (ex. VAT) 1 in stock

Gallenkamp Laboratory Oven OVE.100.210X Lab

ITEM-48537

Gallenkamp Laboratory Oven OVE.100.210X

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order.

£ 500.00 (ex. VAT) 1 in stock

Particle Measuring Systems PMS Liquilaz-E20-WN-HF W/ Enclosure

ITEM-48543

Particle Measuring Systems Liquilaz-E20-WN-HF with Enclosure

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonable cosmetic condition. We were unable to identify the laser classification.

Due to testing limitations with Class 3 and above lasers at our facility, the unit has not been powered on or functionally tested.

Includes:

PMS Aqua NEMA enclosure
PMS Liquilaz-E20-WN-HF particle counter

Model: Liquilaz-E20-WN-HF

£ 500.00 (ex. VAT) 1 in stock

MSE Mistral 2L Floor Standing Centrifuge w/ Rotor Lab

ITEM-48544

MSE Mistral 2L Floor Standing Centrifuge w/ Swing-Out Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order.

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 26 x Various Microscopes Swift, Meiji, Prior, Meopta Lab

ITEM-48560

This job lot of items comes from a university where they were surplus to requirement. They were collected from various store rooms and facilities.

These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

Included are:

5 x Swift Instruments Stereo Twenty
4 x Meiji ATM-7
3 x Meopta (model unknown, 2 with wooden cases)
3 x Prior S2000
2 x Swift Instruments (model unknown)
5 x XSP-05
1 x M1000-D
1 x Hampshire Micro (model unknown)
1 x Wetzlar ZLKC205
1 x Unbranded

£ 500.00 (ex. VAT) 1 in stock

580 TEL-X-OMETER X-Ray Spectrometer Lab

ITEM-47685

580 TEL-X-OMETER X-Ray Spectrometer Lab

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition, we are unable to test it at our facility due to limitations with testing X-Ray equipment.

£ 500.00 (ex. VAT) 1 in stock

580 TEL-X-OMETER X-Ray Spectrometer

ITEM-47686

580 TEL-X-OMETER X-Ray Spectrometer Lab

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition, we are unable to test it at our facility due to limitations with testing X-Ray equipment.

£ 500.00 (ex. VAT) 1 in stock

Medilux UV 436 HF Irradiation Device w/ 12 x F36W Bulbs Lab

ITEM-48468

Medilux UV 436 HF Irradiation Device w/ 12 x F36W Bulbs Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition in its original packaging and in complete working order.

Also included;

12 x F36W blue_V
2 x Sets of UV Goggles

£ 500.00 (ex. VAT) 1 in stock

8 × Hounsfield Tensometer Type W Tensile Machines

ITEM-47708

8 × Hounsfield Tensometer Type W Tensile Machines

These items were removed from a university where they were surplus to requirements.

They are in good cosmetic condition and in good mechanical order.

The previous owner reported that they were mechanically operational but experienced issues with upgraded electronics.

Originally, they were designed as fully mechanical systems.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Lab Companion IS-971R Shaking Incubator Lab Cooling Fault

ITEM-39716

Lab Companion IS-971R Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has a cooling fault. It is seemingly in otherwise working condition.

It is in good cosmetic condition with minor marks

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator Lab Faulty

ITEM-39911

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The system is faulty and requires a new controller.

It is in otherwise good cosmetic condition with minor marks.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Innova 4330 Incubator Shaker Lab Spares/Repairs

ITEM-40991

This New Brunswick Innova 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up but does not shake. The heating and cooling functions work.

It is in reasonably good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Innova Model 4330 Incubator Shaker Lab Spares/Repairs

ITEM-40992

New Brunswick Innova Model 4330 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit heats but does not cool. The shaking works, but requires maintenance.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Innova Type 4330 Incubator Shaker Lab

ITEM-40993

This New Brunswick Innova Type 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up and heats, but does not cool or shake.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Weiss Gallenkamp Sanyo PSC022 Pharma Safe System Stability Chamber Lab Faulty

ITEM-37811

Weiss Gallenkamp Sanyo PSC022 Pharma Safe System Stability Chamber

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition.

It was successfully temperature tested, however, during further testing it failed to retain humidity.

Therefore, it is listed as Spares/Repair.

It has been recently fitted with a new element.

Eurotherm 220 8E controllers for temperature and humidity

Two compartments of size 65cm x 49cm x 20cm (l x w x h)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LEEC Touch 50 Culture Safe CO2 Incubator Lab Spares/Repairs

ITEM-38889

LEEC Touch 50 Culture Safe CO2 Incubator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Sanyo C02 Incubator Model MC0-175 Lab

ITEM-37592

Sanyo C02 Incubator MC0175

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer & co2 analyser not included).

It is in reasonably good cosmetic condition, however there is some rust visible and the control cover hinge has broken.

The door seal and latch are both in good cosmetic condition.

This item includes 4 x Shelves and a Humidity Pan.

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-175 CO2 Incubator Lab

ITEM-35162

Sanyo MCO-175 CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has been recertified. The CO2 and Heating features are working well.

This item is fixed with castors.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder KB 240 Refrigerated Incubator Spares/Repair Lab

ITEM-42729

Binder KB 240 Refrigerated Incubator

This item was removed from a facility where it was surplus to requirement.

The unit powers on, and the screen is functional.

However, temperature settings could not be adjusted during testing, and the unit did not rise above ambient temperature when left running.

Therefore, it is listed as Spares/Repair.

Includes:

Four internal shelves

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Function Line BB15 Co2 Incubator Spares/Repair Lab

ITEM-42723

Thermo Scientific Function Line BB15 CO₂ Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The incubator powers on, and the display and controls respond correctly. During testing, it was set to 37°C and left to run for 24 hours but did not exceed 19.8°C, consistent with the ambient temperature in the listing room.

No further temperature testing or CO₂ function testing was performed.

Due to the issues stated above, this item was listed as Spares/Repair.

Includes:

Three internal shelves

The door seal and inner door catch are in good condition.

In good clean cosmetic condition with functional controls and display, but unable to confirm heating function due to limited temperature rise.

£ 500.00 (ex. VAT) 1 in stock

LEEC Hot and Cold Laboratory Incubator Model PFC2CK Lab

ITEM-42425

LEEC Hot and Cold Laboratory Incubator Model PFC2CK Lab

This item was removed from a university lab where it surplus to requirement.

It is good cosmetic condition and good working order.

All Products

Filters