All Products

£ 500.00 (ex. VAT) 1 in stock

Panasonic Model No. AW-HE60 CCTV Camera

ITEM-37269

Panasonic AW-HE50 CCTV Cameras

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on.

The previous client has stated it was in full working order prior to removal.

This item was tested with an in-house power supply cable. (not included.)

£ 500.00 (ex. VAT) 1 in stock

Spellman Power Supply RSBX30X3077 Lab

ITEM-34855

Spellman Power Supply RSBX30X3077

Model: RSBX30X3077

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but we are unable to test it at our facility.

Includes 9-pin FEMALE DIN Cable.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 Incubator Lab Spares/Repairs

ITEM-39999

Sanyo MCO-18AIC CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers up, it has been tested with a digital thermometer (not included).

The current CO2 Pump failed during testing and will require a new one to be fitted.

Therefore, it is listed as Spares/Repair.

Features 3 Shelves.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Mixed Job Lot of Laboratory Equipment - Syngene, Polymer, VWR, Carl Zeiss, WPA

ITEM-37348

Mixed Job Lot of Laboratory Equipment - Syngene, Polymer, VWR, Carl Zeiss, WPA

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

ITEM-37345 Syngene InGenius LHR Gel Doc Imaging System Lab

ITEM-37347 Polymer Laboratories PL-AS RT GPC Auto Sampler Lab

ITEM-37376 VWR KuroGel Maxi 20 Electrophoresis

ITEM-37379 2x Air admiral Cole Parmer Pumps

ITEM-37380 fisherbrand 70155 pump and fisherbrand FB70150 pump

ITEM-37381 Mettler collage2440 Delta Range Weighing Scales

ITEM-37383 3x Boxes of small glass panels

ITEM-37384 Metal Frame

ITEM-37388 Box of cables and adapters

ITEM-37389 2x Hamilton 76615 Syringe cleaner

ITEM-37393 Oertling Model-A03 Balancing Scales

ITEM-37394 Glass Lab Beaker/Flask

ITEM-37395 harvard student oscillograph

ITEM-37396 Scalamp Galvanometer

ITEM-37397 Psychogalvanometer

ITEM-37398 Digital Storage Oscilloscope

ITEM-37399 WPA Edspot long scale galvanometer

ITEM-37400 Mannesmann Tally Pixy

ITEM-37401 Linstead E.H.T Supply Type S2

ITEM-37402 Unimatic SN1 Stanton

ITEM-37405 Wayne Kerr Bridge Detector

ITEM-37406 2x RS Digital MultiMeters

ITEM-37407 Walter Ozonizer

ITEM-37409 Miscellaneous Parts

ITEM-37410 Shuttle X Super ritemaster

ITEM-37412 beckman london eyepiece

ITEM-37413 Various cables

ITEM-45387 Thermo Scientific HAAKE SC 100 Digital Immersion Cooler/Heater Lab

ITEM-45440 Perkin Elmer GeneAmp 9600 PCR

ITEM-45463 Marzhauser Wetzlar 2-Achsen-Joystick CZ

ITEM-45464 Thermo Orion 3 Star pH Benchtop

ITEM-45465 A&D Instruments t6969 0.01 Balance

ITEM-45466 mettler toledo fiveeasy fe20

ITEM-45467 Carl Zeiss NAG 2, 12V 100W Stab Power Supply

ITEM-45468 VWR Lab Dancer s42

ITEM-45469 VWR Lab Dancer s42

ITEM-45472 Lot of Hendley Essex Microscope Slides

ITEM-46049 Unbranded Microscope Eye pieces

ITEM-46050 Dosimeter Charging Unit

ITEM-46129 Hanna Instruments HI 2211 pH/ORP Meter

ITEM-46249 A&D AND FR-200 Digital Precision Analytical Balance Weighing Scales Lab

ITEM-46290 Ablerex 3000 rt plus

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Z Corporation ZPrinter 450 3D Printer Spares/Repair Lab

ITEM-37485

Z Corporation ZPrinter 450 3D Printer

This item was removed from a university laboratory where it was surplus to requirements.

In good cosmetic condition. The printer failed to power on and did not pass the PAT test.

Therefore, it is listed as Spares/Repair.

Specifications;

Build speed: between 2 to 4 layers per minute

Build volume:

X-axis: 8 inches (203 mm)
Y-axis: 10 inches (254 mm)
Z-axis: 8 inches (203 mm)
Build capacity: 640 cubic inches
Layer thickness:
Minimum: 0.0035 inches (0.089 mm)
Maximum: 0.004 inches (0.102 mm)
Color shell thickness: 0.025 inches
Resolution: 300 x 450 dpi
Materials:
Powder: zp130
Binder: zb59
Print heads:
HP11 (clear binder)
HP57 (single tricolor CMY)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific ULT Freezer Model-U725 -86 Spares/Repair Lab

ITEM-46517

New Brunswick Scientific ULT Freezer Model-U725 -86 Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it did not drop in temperature.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Hitachi F-4500 Fluorescence Spectrophotometer System Spares/Repair Lab

ITEM-42393

Hitachi F-4500 Fluorescence Spectrophotometer System

This item was removed from a university laboratory where it was surplus to requirements.

The Hitachi F-4500 unit does not power on; however, it is in good condition with minimal wear. The previous owner said the PSU had failed.

Due to it not powering on it is listed as Spares/Repair

Includes:

Vigen Genie P3 500 Computer
Model: F-4500
Serial No.: 1163-004
Software: F-4500 FL_mnu - 2504060-05.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Function Line BB15 Co2 Incubator Spares/Repair Lab

ITEM-42723

Thermo Scientific Function Line BB15 CO₂ Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The incubator powers on, and the display and controls respond correctly. During testing, it was set to 37°C and left to run for 24 hours but did not exceed 19.8°C, consistent with the ambient temperature in the listing room.

No further temperature testing or CO₂ function testing was performed.

Due to the issues stated above, this item was listed as Spares/Repair.

Includes:

Three internal shelves

The door seal and inner door catch are in good condition.

In good clean cosmetic condition with functional controls and display, but unable to confirm heating function due to limited temperature rise.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire Model NU-5510E Incubator Lab Spares/Repairs

ITEM-46173

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5510E Incubator Lab Spares/Repairs

ITEM-46172

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 150i Incubator Lab Spares/Repairs

ITEM-37320

Thermo Scientific Heracell 150i Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however due to a suspected board fault an error was produced that prevented further testing.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Millipore Guava EasyCyte 8HT Flow Cytometer Lab Spares/Repairs

ITEM-30464

This Millipore Guava EasyCyte 8HT Flow Cytometer was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition with only minor marks from use.

The unit has been tested with samples but was showing readings of 200-300 when it should be showing readings of around 50000. We were unable to diagnose the exact fault.

The unit has a Dell Optiplex 7010 PC paired with it. The PC includes a keyboard, mouse, monitor, USB and VGA Cable. It has had a brand new copy of 32bit Windows 7 installed.

Guavasoft 3.1 has also been installed, which includes:

ViaCount.

InCyte (This requires an unlock code from Millipore to run).

easyCheck.

Guava Clean 3.1.

We have been able to open and close the sample tray. This proves that the system is fully connected.

It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Lot Of 10 x VWR Adjustable Lab Chairs

ITEM-47095

Lot Of 10 x VWR Adjustable Lab Chairs

These items were removed from a facility where they were surplus to requirement.

All are in good cosmetic condition and fully functional.

£ 500.00 (ex. VAT) 1 in stock

Grant FH15 Flow Heater and FC20 Flow Cooler Lab

ITEM-42784

Grant FH15 Flow Heater and FC20 Flow Cooler

This system was removed from a university laboratory where it was surplus to requirements.

The FH15 Flow Heater powered on with the pump running. The heater light illuminated when the set temperature was increased above ambient.

The FC20 Flow Cooler powered on, and both the compressor and fan could be heard operating.

These units do not include a built-in tank and require an external header tank to function as part of a complete system. Due to this, full-range temperature testing was not performed.

It is in good cosmetic condition.

Includes:

Grant FH15 Flow Heater (Serial No. 72311)
Grant FC20 Flow Cooler (Serial No. 72311)

Model: FH15 / FC20
Serial No.: 72311

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Innova U725-G Ultra Low Temperature Freezer - Spares/Repair Lab

ITEM-42838

New Brunswick Innova U725-G Ultra Low Temperature Freezer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it failed to drop below 2ºc when set to its minimum of -86ºc.

Therefore, it is listed as Spares/Repair.

Specifications;

Model U725-86G
Capacity 727 litres
Serial No. 1016-0976-1111

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific HERAfreeze ULT Freezer HFU 2185 Basic-41 Lab Spares/Repairs

ITEM-42839

Thermo Scientific HERAfreeze HFU 2185 Basic-41 -80 Ultra Low Freezer Lab

This item was removed from a university lab where it was surplus to requirement.

The unit was described as "unreliable" prior to collection - it is sold for spares/repairs.

Specifications;

Model HFU 2185 Basic-41
Serial No. 020T-248264-0T
Capacity 572 litres

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Physica MCR 301 Anton Paar Modular Compact Rheometer Spares/Repair

ITEM-47201

Physica MCR 301 Anton Paar Modular Compact Rheometer Spares/Repair

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition, however, it does not power on due to a suspected motherboard fault.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Workplace Modular Systems Laboratory Benchtop Cabinet 100 x 70 x 83cm

ITEM-46583

Workplace Modular Systems Laboratory Benchtop Cabinet 100 x 70 x 83cm

This item was removed from a facility where it was surplus to requirements.

It is in good used cosmetic condition. The cabinet includes removable side panels and a single internal drawer with dimensions of approximately 51cm (L) x 34cm (W) x 11cm (D).

£ 500.00 (ex. VAT) 1 in stock

Workplace Modular Systems Laboratory Benchtop Cabinet 100 x 70 x 83cm (LxWxH)

ITEM-46584

Workplace Modular Systems Laboratory Benchtop Cabinet 100 x 70 x 83cm

This item was removed from a facility where it was surplus to requirements.

It is in good used cosmetic condition. The cabinet includes removable side panels and a single internal drawer with dimensions of approximately 51cm (L) x 34cm (W) x 11cm (D).

£ 500.00 (ex. VAT) 1 in stock

Workplace Modular Systems Laboratory Benchtop Cabinet 100 x 70 x 83 Lab

ITEM-46585

Workplace Modular Systems Laboratory Benchtop Cabinet 100 x 70 x 83 Lab

This item was removed from a facility where it was surplus to requirement.

It is in good used cosmetic condition. The cabinet includes removable side panels and a single internal drawer with dimensions of approximately 51cm (L) x 34cm (W) x 11cm (D).

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5800E C02 Incubator Lab Spares/Repairs

ITEM-39096

Nuaire 5800E C02 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5810E CO2 Incubator Lab Spares/Repairs

ITEM-39095

Nuaire 5810E CO2 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 did not increase on testing, and the sample pump failed, therefore it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Cavey Laboratory Engineering McIlwain Tissue Chopper Model MTC/2E No Blade

ITEM-42796

Cavey Laboratory Engineering McIlwain Tissue Chopper Model MTC/2E

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, powers on and is in good mechanical order. We are unable to test it further at our facility.

Please note; There is no blade present on the cutting arm.

£ 500.00 (ex. VAT) 1 in stock

Windley Bros Heavy Duty Isolation Anti Vibration Table

ITEM-42830

Windley Bros Heavy Duty Isolation Anti Vibration Table

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably poor cosmetic condition with surface rust present. We are unable to test it at our facility.

This anti-vibration table is constructed from cast iron and steel. The frame comprises angle iron legs with steel bar bracing, supporting a cast iron base.

Working height: 93cm.

Solid steel tabletop: 102 x 76 x 1.2cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Allegra X-22R Benchtop Centrifuge Spares/Repair Lab

ITEM-47198

Beckman Allegra X-22R Benchtop Centrifuge – Spares/Repair

This item was removed from a university lab where it was surplus to requirement.

It powers on and is in good cosmetic condition. However, it has been identified as having a faulty fan, compromised vibration dampers, and issues with motor suspension.

Therefore, this item is being sold strictly as Spares/Repair.

Includes:

Beckman Allegra X-22R unit only (no rotor or accessories included)

£ 500.00 (ex. VAT) 1 in stock

Lab-Bubble Still Air PCR Enclosure - Blue

ITEM-39749

Lab-Bubble Still Air PCR Enclosure - Blue

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

£ 500.00 (ex. VAT) 1 in stock

Hema-tek 2000 Slide Stainer Model - 4488A Lab

ITEM-30367

This Hema-tek 2000 Slide Stainer Model - 4488A was removed from a university lab where it was surplus to requirements.

The unit powers up and runs. The lab informed us that it had no known faults prior to removal.

It is in good cosmetic condition with minor marks from use.

£ 495.00 (ex. VAT) 1 in stock

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller Lab

ITEM-35997

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

£ 495.00 (ex. VAT) 1 in stock

Gallenkamp Digital Flame Analyser FGA-350-L w/ Lafert Air Compressor Pump Lab

ITEM-24780

This Gallenkamp Digital Flame Analyser FGA-350-L was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition with minor marks from use. We were able to get it to produce a spark.

The lab confirmed that it was working prior to removal.

With it is;

1 x Lafert air compressor pump:

Model LM 63/4

The unit powers up but has not been tested further.

£ 495.00 (ex. VAT) 1 in stock

Millipore Millistak Pod Disposable Depth Filters and 3 Capsule Filters

ITEM-36538

Millipore Millistak Pod Disposable Depth Filters and 3 Capsule Filters

The units are brand new and unused.

2x Boxes of MC0HC10FS1

6x Boxes of MC0HC054H1

1x Plastic Pack of Optiscale DisposableCapsule Filters

£ 495.00 (ex. VAT) 1 in stock

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB

ITEM-36555

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB

This was removed from a university where they were surplus to requirements.

1x Yamaha RX V1500

S/N: Y066054VX

1x Extron MVX 84 VGA A

S/N: 33-1023-01 REV C

1x AMX NI-3000 Integrated Controller

1x AMX NFX-Mini

1x Universal Open Rack Cabinet with Wheels, black

1x Jamo D 6SUB

S/N: 16211050024

All items are in good cosmetic condition and powered on without issue - The control buttons are fully functional and performing as intended.

£ 495.00 (ex. VAT) 1 in stock

Lot of HP & Agilent Chromatograph Circuit Boards Lab

ITEM-38796

Lot of HP & Agilent Chromatograph Circuit Boards

The units are untested.

Included are;

1 X HP 5890 10245-60015 Gas Chromatograph Electronic Pressure Control Board
1 X HP E2071/82341 ISA Interface Card E2073-66501 HPIB GPIB Board
2 X Agilent HP 5890A 5890 II GC ECD Electron Capture Detector Board 19233-60015
1 X Agilent HP 19257-60015 & 19257-60020 5890 Series II HPIB GPIB
1 X Berger SFC Minigram Circuit Boards STI460093684, 40200G9D6, 19257-60505
3 X HP Agilent SERIES II GAS CHROMATOGRAPH 5890 Keypad 05890-60740
2 X Agilent HP 5890 GC II 120V Single Phase Power Supply 05890-60050 Chromatograph

NEW ITEM

£ 495.00 (ex. VAT) 1 in stock

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

ITEM-38989

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

33 x Boxes

Box info:-

Order no. HPWAAM/2

Cast no. 195790

Weight - 8.6kg

Ref - 16898/2

Size - 4.0 x 1.7mm

Quality - 100Cr6

All looks new and unused though a box has been opened for photos.

£ 495.00 (ex. VAT) 1 in stock

Dionex P580A Low Pressure Gradient Degassing Pump Lab

ITEM-38784

Dionex P580A Low Pressure Gradient Degassing Pump

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in good cosmetic condition with minor marks.

£ 490.00 (ex. VAT) 1 in stock

Grant SBB Aqua 12 Plus Water Bath Lab

ITEM-42220

Grant SBB Aqua 12 Plus Boiling Water Bath

This item was removed from a university laboratory where it was surplus to requirements.

The water bath is in good cosmetic condition, with some light wear below the waterline.

It powers up and is in good working order (thermometer not included).

Specifications.

Model: SBB Aqua 12 Plus
Serial No.: MJ1028005
Capacity: 12 litres
Features: Clear polycarbonate lid

£ 490.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator Model - MCO175 Lab

ITEM-37591

Sanyo CO2 MCO-175 Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It is in fairly good used condition, showing signs of rust around the unit. It includes four shelves and a humidifying pan, with the door catch and seal both in good condition.

The unit powers up and is in good working order (thermometer & co2 analyser not included).

Specifications.

Model: MCO-175
Serial No: 20606783

£ 490.00 (ex. VAT) 1 in stock

Hund Wetzlar Wilovert Inverted Microscope w/ 1 x Objective 20/0.25 Ph-p Lab

ITEM-29830

Hund Wetzlar Wilovert Inverted Microscope w/ 3 x Objectives

This was removed from a university lab where it was surplus to requirements.

The unit powers on and is in full working order. It is in good cosmetic condition with minor marks from use.

It is supplied with;

3 x WF 10X Eyepieces.

2 x Covers.

1 x Eyepiece (no information).

1 x 10 x P Eyepiece.

1 x Spare Fuse Part No. (670.55327).

1 x Tool Part No. (019.0120.0).

1 x Hund Wetzlar Objective SPL 20/0.25 Ph-p.

£ 485.00 (ex. VAT) 1 in stock

KNF Neuberger N 035 AN.18 Diaphragm Vacuum Pump

ITEM-38768

KNF Neuberger NO35AN.18 Diaphragm Vacuum Pump

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs but has not been tested further.

It is in good cosmetic condition with minor marks.

£ 480.00 (ex. VAT) 1 in stock

Robins Scientific Hydra 96 Microdispenser Lab

ITEM-35101

This Robins Scientific Hydra 96 Microdispenser was removed from a university lab where it was surplus to requirements.

The unit powers up and the up/down function has been tested. It is in good cosmetic condition with marks from use.

£ 480.00 (ex. VAT) 2 in stock

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

ITEM-39710

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks

£ 480.00 (ex. VAT) 1 in stock

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

ITEM-39744

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

£ 480.00 (ex. VAT) 3 in stock

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

ITEM-39746

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

£ 475.00 (ex. VAT) 1 in stock

Elga Model: PURELAB FLEX Water Purification System Lab

ITEM-34576

This was removed from a university lab where it was surplus to requirements.

We were unable to test the unit as it was not supplied with the PSU

Max Pressure: 1.5/22 Inlet.

bar/psi: 1.5/22 Working.

Elga LC197 - Biofilter fitted - Expiry Date 2020-02.

Purelab Flex Purification Pack LC208 fitted - Batch No. G34/17 Use By: 16/01/20.

£ 470.00 (ex. VAT) 1 in stock

Oxford Cryosystems Cryostream 600, Cold Head & Reactivation Heater Lab

ITEM-35330

Oxford Cryosystems Cryostream 600, Cold Head & Reactivation Heater Lab

This was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition.

The Reactivation Heater was tested to 108.8 ˚C with a digital thermometer (not included).

£ 460.00 (ex. VAT) 1 in stock

Jeol JEM-1200 EX Pump and Pressure Tank

ITEM-39684

Jeol JEM-1200 EX Pump and Pressure Tank

This was removed from a university lab where it was surplus to requirements.

The unit has not been tested.

It is in good cosmetic condition with marks from use.

£ 455.00 (ex. VAT) 1 in stock

Unbranded Laboratory Microscope Vibration Isolation Platform Lab

ITEM-19969

This Unbranded Laboratory Microscope Vibration Isolation Platform was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in reasonably good cosmetic condition with some marks from use.

Size not taking into account the shape - L45 X W60 X H7.5cm

£ 455.00 (ex. VAT) 1 in stock

MakerBot Replicator Model Z18 3D Printer 5th Gen

ITEM-37488

MakerBot Replicator Z18 3D Printer (5th Gen)

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in very good cosmetic condition. No further testing has been carried out, but the previous owner stated it was in full working order prior to removal.

No filament spool is included.

Usage:

Print time: 188.12 hours
Mass extruded: 3.1 kg

Specifications:

Build volume: 25.2 x 19.9 x 15 cm (L x W x H)
Layer resolution: 100 microns
Filament type: 1.75 mm
Nozzle diameter: 0.4 mm

Includes:

MakerBot Replicator Z18 3D Printer (5th Generation)

£ 450.00 (ex. VAT) 1 in stock

Liebherr Model LGUEX 1500 MedilLine Laboratory Freezer

ITEM-46455

Liebherr Model LGUEX 1500 MedilLine Laboratory Freezer

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 450.00 (ex. VAT) 1 in stock

Liebherr Model LGUEX 1500 MedilLine Laboratory Freezer

ITEM-46452

Liebherr Model LGUEX 1500 MedilLine Laboratory Freezer

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in working order.

£ 450.00 (ex. VAT) 1 in stock

Liquid Nitrogen Tank Dewar Trolley

ITEM-46992

Dual Liquid Nitrogen Tank Trolley

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.