All Products
Items 2251 to 2300 of 2721
£ 350.00 (ex. VAT) 1 in stock
Clondiag ATR 03 Baie Tube Reader Lab
ITEM-19438
This Clondiag ATR 03 Baie Tube Reader was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good cosmetic condition with some marks from use. It is supplied with a USB cable.
It has not been tested.
£ 350.00 (ex. VAT) 1 in stock
Mefar Electromedical Dosimeter MB3 Lab
ITEM-40956
This Mefar Electromedical Dosimeter MB3 was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good cosmetic condition but has some marks from use.
It powers up with pump sounding, we are unable to test it further at our facility.
£ 350.00 (ex. VAT) 1 in stock
Genapta Laser Enable and Disable Units & Single Photon Counting Box Lab
ITEM-20725
Genapta Laser Enable and Disbale Units & Single Photon Counting Box
This system was removed from a university lab where it was surplus to requirements.
All the units power on but we were unable to test any further. They are in a reasonable used cosmetic condition with marks from use.
£ 350.00 (ex. VAT) 1 in stock
Genetix Qpix2 Benchtop Colony Picker with Software & Accessories Lab
ITEM-27505
This Genetix Qpix2 Benchtop Colony Picker was removed from a university lab where it was surplus to requirements.
The lab said it was fully working prior to removal but unfortunately it seems like the dongle for the software has been misplaced.
Included are;
1 x Genetix Qpix2 Benchtop Colony Picker
Inside dims - D67 W100 H35cm
We powered up the unit but were unable to test if further.
Inside side panel of bottom unit - Jun-Air Model 400 Oil-Less Compressor - It powers on and works
1 x PC, Monitor, Keyboard & Mouse - All power on and work, the pc has the software listed below.
The item is in a reasonable, used cosmetic condition.
Manuals/Software:-
QPix2 User Manual
Replicating Application Guide
Gridding Application Guide
Picking Application Guide
QSoft Data Tracking Application Guide
QFill2 User Manual
QScan User Guide
aQuire User Guide
Discs:-
QSoft xp Build 6400.16
QSoft xp Build 6100.11
QSoft xp Build 6300.01
QScan beta 1
QP2231 (Floppy Disk)
Boxed Accessories/Consumables include:-
Metrologic Scanner
6 x Master PL-L 840/4P Light bulbs
Lots of various Slides inc. brands Genetix & EZ-Rays
Genetix Micro Spotting Pins
Genetix Microarray Spotting Solution
Various Packs of Glass Beads
2 x Plastibrand Tip-Racks
Various other spare bits/parts
16 x New & Sealed Boxes of VWR Micro Centrifuge Tubes (2ml) 500/pack (10 Packs in box)
8 x Boxes of ISS 2ml Microtubes with Separate White Caps Gamma Iradiated (4 x Ref MT0075IR)
1 x Box of ISS 10ml Specimen Collection Tubes (QTY 500)
£ 350.00 (ex. VAT) 1 in stock
Mettler Toledo Titrator Model - DL21 Lab
ITEM-27546
This Mettler Toledo Titrator Model - DL21 was removed from a university lab where it was surplus to requirements.
The unit powers up but we were unable to test it further at our facility.
It is in reasonable cosmetic condition but the button panel is loose and needs to be glued back on.
It's supplied with a serial cable.
£ 350.00 (ex. VAT) 1 in stock
Profile Pro 8000 Module Chassis with 8x WDM sources & Key Lab
ITEM-28391
This Profile Pro 8000 Module Chassis was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition.
Revision. 4.44
Interface: 1.22
8x WDM sources
It comes with;
1 x Kaba Micro- E Key Model No. ED9001
£ 350.00 (ex. VAT) 1 in stock
Genetix QArray Microarray Printer with Jun-Air 400 Compressor OF302-10S Lab
ITEM-27506
This Genetix QArray Microarray Printer was removed from a university lab where it was surplus to requirements.
The lab said it was working prior to removal.
Included in the system are;
1 x Genetix QArray
Inside dims - D67 W100 H35cm
The unit powers on but we were unable to test it further at our facility.
Inside side panel of bottom unit -
1 x Jun-Air Model 400 Oil-Less Compressor
It powers on, works, and comes with a manual.
1 x Separate Jun-Air Unit:-
Model - OF302-10S
It powers on
Computer parts include:-
PC, Monitor, Keyboard, Mouse & Metrologic Scanner
The PC has QSoft IO Manager, QSoft XP ReStackers & QSoft Microarraying programs/software.
The item is in a reasonable, used cosmetic condition.
Manuals:-
Genetix Microarray User Training Guide
MicroArraying Application Guide
QArray User Guide
Array-Pro Analyzer Users Guide
Boxed Accessories/Consumables include:
18 x Mostly New & Sealed Boxes of VWR Micro Centrifuge Tubes (2ml) 500/pack (10 Packs in box)
8 x Boxes of ISS 2ml Microtubes with Separate White Caps Gamma Iradiated (4 x Ref MT0075IR)
Stand Apron, Mask Stand and Mount for Metrologic Scanner
Computer Cable
£ 350.00 (ex. VAT) 1 in stock
Metrohm 837 IC Eluent Degasser Lab
ITEM-41845
Metrohm 837 IC Eluent Degasser Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Also included is the original User's Manual.
£ 350.00 (ex. VAT) 1 in stock
Stratasys Mojo 3D Printer Unit Lab
ITEM-44930
Stratasys Mojo 3D Printer Unit
This item was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition and powers on. No further testing has been conducted.
Included:
- Manual
- 2 x Software Discs
£ 350.00 (ex. VAT) 1 in stock
Statebourne Cryogenics Bio 34 LN2 Dewar Lab
ITEM-44696
Statebourne Cryogenics Bio34 LN2 Dewar Bio34 Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.
£ 350.00 (ex. VAT) 1 in stock
Perkin Elmer Series 200 Peltier Column Oven Lab
ITEM-46649
Perkin Elmer Series 200 Peltier Column Oven Lab
This item was removed from a university lab where it was surplus to requirement.
It is reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 350.00 (ex. VAT) 1 in stock
Thermo Scientific 2 Litre Precision GP 02 TSGP02 Water Bath Lab
ITEM-46696
Thermo Scientific 2 Litre Precision GP 02 Water Bath Lab
this item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
£ 350.00 (ex. VAT) 1 in stock
NBS Cryo Research Ltd CO2/LN2 CO2 Back-Up Lab
ITEM-46739
NBS Cryo Research Ltd CO2/LN2 CO2 Back-Up Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 345.00 (ex. VAT) 1 in stock
Bio-Rad Universal Hood II with Transilluminator Lab
ITEM-31283
This was removed from a university lab where it was surplus to requirements.
The unit powers up and the lights are all in working order.
There is no camera.
Comes with:-
Box of 6 Bio-Rad ChemiDoc XRS Lamps
Hardware Instruction Manual
£ 345.00 (ex. VAT) 1 in stock
Zeiss Planapo 63x/1.4 Oel Microscope Objective 461841-9901
ITEM-36887
Zeiss Planapo 63x/1.4 Oel Microscope Objective 461841-9901
The unit is in good cosmetic condition but has not been tested.
£ 340.00 (ex. VAT) 1 in stock
Taylor-Wharton 35HC Liquid Nitrogen Cryogenic Storage Dewar
ITEM-41588
Taylor-Wharton 35HC Liquid Nitrogen Cryogenic Storage Dewar
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.
£ 340.00 (ex. VAT) 1 in stock
Techne Flexigene FFG02FSD Benchtop Thermal Cycler PCR Lab
ITEM-14889
This Techne Flexigene FFG02FSD Bench-Top Thermal Cycler was removed from a laboratory where it was surplus to requirements.
The unit is in good condition but is showing signs of wear. It powers on, and a basic program was run to test the lid and the sample tray heater, which is working. It has not been tested further.
NEW ITEM
NEW ITEM
£ 340.00 (ex. VAT) 1 in stock
Waters Probe Assembly Spares Kit Part Number 700004596 for Xevo Lab
ITEM-31720
Waters Probe Assembly Spares Kit Part Number 700004596
This was removed from a university lab where it was surplus to requirements.
It is new and sealed in the box.
£ 340.00 (ex. VAT) 1 in stock
Heraeus Sorvall 75006444 5650rpm 2x500g Swinging Bucket Centrifuge Rotor Lab
ITEM-35400
Heraeus Sorvall 75006444 5650rpm 2x500g Swinging Bucket Centrifuge Rotor Lab
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has not been tested. No buckets are supplied.
Maximum RPM: 5650.
Maximum Load: 2 x 500g.
£ 330.00 (ex. VAT) 1 in stock
Leitz Laborlux K Binocular Microscope Type: 020-435.036 w/ 4 x Objectives Lab
ITEM-30302
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order.
It is in reasonably good cosmetic condition but has some marks and scratches from where stickers had been removed.
Head - 512 661
2 x Eye Pieces -Periplan 10 x / 18 (519 748)
4 x Objectives:-
160/- EF 10/0.25 (519760)
160/0.17 EF 40/0.65 (519762)
160/0.17 EF 100/1.25 OEL (519804)
160/- EF 4/0.12 (519759)
£ 330.00 (ex. VAT) 1 in stock
Axon Instruments Axopatch 200B Amplifier Integrating Patch Clamp Lab
ITEM-41556
Axon Instruments Axopatch 200B Integrating Patch Clamp Amplifier Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powered up, we are unable to conduct further testing at our facility.
£ 330.00 (ex. VAT) 1 in stock
Taylor Wharton CX500 Liquid Nitrogen Dewar Lab
ITEM-37006
Taylor Wharton CX500 Liquid Nitrogen Dewar
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition with minor marks but has not been tested.
£ 330.00 (ex. VAT) 1 in stock
Piab H40 Classic Vacuum Pump Lab
ITEM-34998
This Piab H40 Classic Vacuum Pump was removed from a university lab where it was surplus to requirements.
The unit has not been tested.
It is in good cosmetic condition with marks from use.
£ 330.00 (ex. VAT) 1 in stock
Statebourne Cryogenics Biorack 2400 Liquid Nitrogen Storage Tank DewarLab
ITEM-29810
This Statebourne Cryogenics Biorack 2400 Liquid Nitrogen Storage Tank Dewar was removed from a university lab where it was surplus to requirements.
The unit has not been tested but is in good cosmetic condition with minor marks from use. There are no rack inserts supplied.
65cm diameter, 69cm w/o wheels, 81cm w/ wheels.
Inner - 11 x 4 x 13cm approx.
Outer - 14 x 14 x 24cm approx.
Wheels - 7.8kg, main unit - 34.8kg. 43.6kg combined.
£ 325.00 (ex. VAT) 1 in stock
Shimadzu LC10-AS Liquid Chromatograph System Lab
ITEM-31356
This Shimadzu LC10-AS Liquid Chromatograph System was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good cosmetic condition with minor marks from use. It has not been tested further.
It is supplied with a Shimadzu Syringe Unit .XL. We were unable to power this as it requires a 20-pin connecter.
£ 325.00 (ex. VAT) 1 in stock
Leitz Laborlux K Binocular Microscope Type: 020-435.036 & 4 x Objectives
ITEM-30300
This Leitz Laborlux K Binocular Microscope was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order.
It is in reasonably good cosmetic condition but has some marks and scratches from where stickers had been removed. The Condenser rack and pinion is damaged with teeth missing, if it's turned up too high the knob will get stuck.
Head - 512 661
2 x Eye Pieces -Periplan 10 x / 18 (519 748)
4 x Objectives:-
160/- EF 10/0.25 (519760)
160/0.17 EF 40/0.65 (519762)
160/0.17 EF 100/1.25 OEL (519804)
160/- EF 4/0.12 (519759)
Condenser Head - 0.90ASS1.1 (513548)
Condenser Swing top (513547)
£ 325.00 (ex. VAT) 1 in stock
Nikon Japan Plan UW 2X/0.6 Objective Lab
ITEM-38172
Nikon Japan Plan UW 2X/0.6 Objective Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 320.00 (ex. VAT) 1 in stock
CSi 6000 Solid State Flowmeter Type 006000 Lab
ITEM-32075
This CSi 6000 Solid State Flowmeter Type 006000 was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order. It requires a 9V battery (Not included).
It is in good cosmetic condition with minor marks from use.
There is a manual included.
£ 320.00 (ex. VAT) 1 in stock
Mettler Toledo 20KG Calibration Weight M1 Lab
ITEM-31756
Mettler Toledo 20KG M1 Class Calibration Weight
This was removed from a laboratory where it was surplus to requirements.
The unit is in good cosmetic condition but the case has marks from use.
£ 315.00 (ex. VAT) 1 in stock
BECKMAN JA-20 Fixed Angle Rotor Lab
ITEM-41409
BECKMAN JA-20 Fixed Angle Rotor Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and has not been tested.
Specifications:
- Type: JA-20
- Serial Number: E.21076
- Maximum RPM: 20,000
- Capacity: Holds 8 x 50ml tubes
- Included: Manual
£ 315.00 (ex. VAT) 1 in stock
Molecular Devices Skatron Embla Microplate Washer Lab
ITEM-30469
This Molecular Devices Skatron Embla Microplate Washer was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good cosmetic condition with some marks from use.
It powers up but we were unable to test it further at our facility.
£ 315.00 (ex. VAT) 1 in stock
Gallenkamp Economy Incubator With Fan Size 1 INA.306.010J Lab
ITEM-35871
Gallenkamp Economy Incubator With Fan Size 1 INA.306.010J Lab
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside.
£ 315.00 (ex. VAT) 2 in stock
PFEIFFER Turbomolecular Vacuum Pump TMH 260-005 Lab
ITEM-37416
PFEIFFER Turbomolecular Vacuum Pump TMH 262-005
This was removed from a university lab where it was surplus to requirements.
PFEIFFER Turbomolecular Vacuum Pump:
Model TMH 262-005
DN 100 ISO -K, 3P
The unit is in good cosmetic condition. The fan blade appears to move freely but it has not been powered up.
£ 315.00 (ex. VAT) 1 in stock
Dell Optiplex 780 with Heidolph Hei-Control-Software V1.00 Lab
ITEM-36069
Dell Optiplex with Heidolph Hei-Control-Software
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in god working order.
It is in good cosmetic condition with marks from use.
£ 315.00 (ex. VAT) 1 in stock
Applied Biosystems/MDS SCIEX BioAnalyst® 1.1.5 Software Lab
ITEM-28128
Applied Biosystems/MDS SCIEX BioAnalyst® 1.1.5 Software
This was removed from a university lab where it was surplus to requirements.
P/N 1014362
The item is in reasonable cosmetic condition. There are some minor marks on the disc. The case has some signs of wear.
Also included are the following:
1x Pro ID Software 1.1 Release Notes
1x Validation Certificate, dated 05/01/2005
1x Pro ID Software License Agreement
£ 315.00 (ex. VAT) 1 in stock
Applied Biosystems/MDS SCIEX Pro ICAT Software for use with ICAT™ Reagents
ITEM-28125
Applied Biosystems/MDS SCIEX Pro ICAT Software for use with ICAT™ Reagents
P/N 028450SW100
This was removed from a university lab where it was surplus to requirements.
The item is in good cosmetic condition. There are scratches on the jewel case and signs of age on the booklet. There are no marks on the back of the disc.
The item is untested.
£ 315.00 (ex. VAT) 2 in stock
Applied Biosystems/MDS SCIEX Pro ID Software Lab
ITEM-28124
Applied Biosystems/MDS SCIEX Pro ID Software
This was removed from a university lab where it was surplus to requirements.
It has not been tested.
The item is in good cosmetic condition. There are scratches on the jewel case and signs of age on the booklet, however, there are no marks on the back of the disc.
£ 315.00 (ex. VAT) 1 in stock
Applied Biosystems/MDS SCIEX Analyst® Software Metabolite ID
ITEM-28123
Applied Biosystems/MDS SCIEX Analyst® Software Metabolite ID
This was removed from a university lab where it was surplus to requirements.
It has not been tested.
The item is in reasonable cosmetic condition.
There are some scratches/marks visible on the disc's back.
£ 315.00 (ex. VAT) 1 in stock
LEP MAC5000 73005020 Microscopy Stage Motor Controller Power Supply
ITEM-24240
LEP MAC5000 73005020 Microscopy Stage Motor Controller Power Supply
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.
Model MAC 5000 73005020
Serial No. 127383
£ 315.00 (ex. VAT) 1 in stock
Mettler Toledo M1 Class 20KG Calibration Weight 11117725 Lab
ITEM-31754
Mettler Toledo 20KGF2 Class Calibration Weight
This was removed from a laboratory where it was surplus to requirements.
The unit is in good cosmetic condition but the case has marks and cracks from use. The top of the case is broken.
£ 310.00 (ex. VAT) 1 in stock
ELGA PURELAB Ultra GE Genetic MK2 Water Purifier Purification System Lab
ITEM-38469
ELGA PURELAB Ultra GE Genetic MK2 Water Purifier Purification System
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.
Max Pressure inlet - 0.7/10
Max Pressure Working - 5.5/80
Comes with :
2 X ELGA Labpure S1 - Part No. LC182
2 X ELGA Sanitisation Block - Part No. LA698
1 X UV Filter
1 X ELGA Ultrafiltration Cartridge - Part No. LC151
£ 310.00 (ex. VAT) 1 in stock
Mettler Toledo 20KG Calibration Weight M1 Class 11117725 Lab
ITEM-31755
Mettler Toledo 20KGF2 Class Calibration Weight
This was removed from a laboratory where it was surplus to requirements.
The unit is in good cosmetic condition but the case has marks and cracks from use.
£ 305.00 (ex. VAT) 1 in stock
UVP BioImaging Systems AutoChemi System with DarkRoom, Camera & Light Panel Lab
ITEM-30454
This UVP BioImaging Systems AutoChemi System was removed from a university lab where it was surplus to requirements.
Included are;
UVP BioImaging Systems Autochemi System
PN - 97-0150-02
Powers on
Auto Chemi Darkroom
PN - 95-0351-02
Gepe G-2004 Light Panel
12" x 8" Picture
Powered on when tested with our 12vdc power supply (not included) but it didn't power on via the main unit
UVP Auto Zoom Lens
Computar TV Zoom Lens
M6Z1212MP3 12.5-75mm 1:1.2
Hammatsu Photonics Camera
Model - C8484-51-03G
THe unit does not power up
Software:-
UVP Labworks Image Acquisition & Analysis Software Ver. 4.5
Labworks Capture Support CD Ver. 4.5
Manuals:-
User Manual
Labworks 4.5 Reference Guide
Labworks 4.5 Auto-Pro Reference
Labworks Start up Guide/Image Database Guide/Report Generator
AC1 Auto Darkroom Operating Instructions
The item in in a good, used cosmetic condition but is unable to be tested any further than powering on at this point.
Please note:
The software requires a USB dongle which is not included.
The software will only run in demo mode without this!
£ 305.00 (ex. VAT) 1 in stock
Mettler Toledo 20KG M1 Class Calibration Weight Lab
ITEM-31058
Mettler Toledo 20KG M1 Class Calibration Weight
This was removed from a laboratory where it was surplus to requirements.
The unit is in good cosmetic condition but the case has been cracked slightly.
£ 305.00 (ex. VAT) 1 in stock
Glotech GLO GT416 Low-Speed Laboratory Centrifuge with GRS-S-50-4 Rotor Lab
ITEM-23307
This GLO GT416 Low-Speed Laboratory Centrifuge with GRS-S-50-4 Rotor was removed from a university lab where it was surplus to requirements.
The unit powers up and runs smoothly up to 4000rpm.
It is in reasonably good cosmetic condition with some marks from use.
Rotor - GRS-S-50-4
Max rpm 4k
Max rcf 2700xg
4 x GLB-10 Swinging buckets fits 15ml tubes
£ 300.00 (ex. VAT) 1 in stock
UVP XX-15 UV Lamp Fixture Lab
ITEM-39126
This UVP XX-15 UV Lamp Fixture was removed from a university lab where it was surplus to requirements.
It powers up and is in reasonably good cosmetic condition.
UV bulb included.
£ 300.00 (ex. VAT) 1 in stock
LMS Model 300W Cooler Incubator Lab
ITEM-46076
LMS Model 300W Cooler Incubator Lab
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in working order.
The unit is in poor cosmetic condition, with rust present on the interior.
£ 300.00 (ex. VAT) 1 in stock
Amersham TE 70 ECL Semi-Dry Transfer Unit
ITEM-37382
Amersham TE 70 ECL Semi-Dry Transfer Unit
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.
£ 300.00 (ex. VAT) 1 in stock
6 x WolfVision VZ-8Light4 Desktop Visualizer
ITEM-37263
6 x WolfVision VZ-8Light4 Desktop Visualizer
These items were removed from a university lab where they were surplus to requirement.
All included units are in good cosmetic condition and power on. The previous client has stated they were in full working order prior to removal.
These items were tested with an in-house power supply cable. (not included.)
£ 300.00 (ex. VAT) 1 in stock
HP Invent Designjet T1100 Printer Model Q6683A 24" Print w/ Wheeled Stand
ITEM-42278
HP Invent Designjet T1100 Printer
This item was removed from a university where it was surplus to requirements.
The printer is in very good cosmetic condition and powers on.
The unit initialized and completed a self-test sequence successfully. Ink levels are displayed, showing at least a quarter remaining.
Printing functionality was not tested due to no paper being loaded.
Included:
- HP 72 Ink Supplies
- Printheads: Gray and Photo Black, Matte Black and Yellow, Magenta and Cyan
- Cartridges:
- 69ml: Gray, Photo Black, Yellow, Magenta, Cyan
- 130ml: Gray, Photo Black, Matte Black, Yellow, Magenta, Cyan
Additional Information:
- Ink levels shown as sufficient for immediate use.
Specifications:
- Model: Q6683A
- Serial No.: MY8A96C002
- Best Print Resolution: 2400 x 1200 on glossy paper
- Paper Roll Width: 460mm to 609mm
- Maximum Paper Roll Length: 91.4m
Items 2251 to 2300 of 2721