LMS 400NP Cooled Incubator Lab Spares/Repairs
Item Code: ITEM-42191
Condition: Spares or Repairs
Brand: LMS
Location: Scotland
NOTE - THIS IS A SPARES/REPAIRS ITEM
£ POA
SOLD - Unfortunately this item is no longer available. However, we may have similar items available for sale. Please get in touch with us at , or by phone on +44 29 2086 4661.
Description
LMS 400NP Cooled Incubator
This item was removed from a university where it was surplus to requirement.
The incubator is in excellent cosmetic condition and powers on.
However, the compressor did not start up during testing, so the unit is unable to reach its minimum temperature of -10°C.
Therefore, it is listed as Spares/Repair.
Specifications:
- Serial No.: 12425/17PP
- Capacity: 450 litres
- Internal dimensions: 64 x 55 x 118 cm (l x w x h)
- Temperature range: -10°C to 50°C
- 4 height adjustable shelves (56 x 60 cm)
- Factory set auto defrost system
Item Details
| Property | Value | Tested value |
|---|---|---|
| Electrical Supply | N/A | 1-Phase |
| Plug Included? (1-Phase) | N/A | Yes - Standard UK 3-Pin Mains Plug (BS 1363) |
| PAT Test Result | N/A | Pass |
| PAT Test Date | N/A | 11-10-2024 |
| Voltage | N/A | 240V |
| Type | Unspecified | |
| Heating Method | Unspecified | |
| Refrigeration | Yes | |
| Minimum Temperature (ºC) | -10 | |
| Maximum Temperature | 50 | |
| CO2 Sensor Type | Unspecified | |
| With Hot Air Sterilisation | Unspecified | |
| Humidifier | Unspecified | |
| With UV Lamp | Unspecified | |
| General Quality Checks | ||
| Configuration | N/A | Single Unit |
Delivery
Free shipping is not available on this product. This item will be shipped by pallet delivery. Please contact us for a domestic or overseas shipping quote.
Additional terms and conditions
These items are for spares/repair only, may be defective/unsafe, and are not intended for use.
Incubators may be transported via a range of delivery methods, including palletised courier networks or direct delivery to the intended location of use. During transit, internal sensors, fans, or control systems may be affected by vibration or movement.
To ensure optimal performance and accurate environmental conditions, it is essential that all incubators are allowed to stabilise upon arrival and are professionally calibrated before first use. Calibration ensures the unit reaches and maintains the desired temperature, humidity, or CO₂ levels reliably.
Please ensure:
- The unit is left for a minimum of 12 hours upright and unpowered after delivery.
- Calibration is completed in accordance with manufacturer specifications before any use.
Failure to calibrate prior to use may result in inaccurate conditions and affect experimental integrity or compliance with laboratory standards.
Return policy
Buy with confidence. If you wish to return the item, for whatever reason, you may do so within 45 days subject to our terms and conditions. International buyers will have to pay return shipping.
NOTE: No cables, remotes, accessories, power supplies, consumables or any other items are included unless shown in the item photos or detailed above.