Workshop

SPARES/REPAIR ITEM

£ 350.00 (ex. VAT) 1 in stock

VWR DuoCycler Thermal Cycler - Spares/Repair Lab

ITEM-47682

VWR DuoCycler Thermal Cycler

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good condition with minimal wear.

However, during testing the display briefly flashes with white and black lines before going blank, therefore, it could not be tested further and it is listed as Spares/Repair.

Model: DuoCycler

Reference: VWRI732-1201

Serial No.: 1201-10117

SPARES/REPAIR ITEM

£ 350.00 (ex. VAT) 1 in stock

Nikon Diaphot Microscope Spares/Repair Lab

ITEM-47769

Nikon Diaphot Microscope Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good overall condition, however, during testing, the slide could not be viewed through the optics.

Therefore, it is listed as Spares/Repair.

Additionally, The lamp mounting collar at the rear of the microscope (where the illuminator attaches) has a visible crack in the outer housing near the clamping split (see photo).

Includes:

Nikon Diaphot Microscope

Model: Diaphot

SPARES/REPAIR ITEM

£ 350.00 (ex. VAT) 1 in stock

Leica EG1130 Cold Plate Embedding Centre Cooling Plate Spares/Repair

ITEM-48449

Leica EG1130 Cold Plate Embedding Centre Cooling Plate Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on. During testing, however, it did not achieve its minimum temperature of -15ºC and the compressor produced a loud noise.

As a result, it is being sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 350.00 (ex. VAT) 1 in stock

Scotsman AF 80 Laboratory Ice Machine Spares/Repair Lab

ITEM-48599

Scotsman AF 80 Laboratory Ice Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, during testing it failed to cool.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 350.00 (ex. VAT) 1 in stock

Thermo Separation / Shimadzu HPLC System AS3000, P1500, RF-551 Spares/Repair

ITEM-36843

Thermo Separation Products / Shimadzu HPLC System

This system was removed from a university laboratory where it was surplus to requirements.

It is in reasonable cosmetic condition with minor marks. During testing, the autosampler arm became stuck, and the vial-pickup hook is faulty, causing samples to fall off. The spectrofluorometric detector also produced a popping sound followed by a strong burning smell, indicating an internal fault. No further testing has been carried out.

Included Components:

TSP SpectraSYSTEM Variable Loop Autosampler with Column Oven & Sample Cooling

Model: AS3000

S/N: 096/06323-5

Powers up; autosampler arm sticks and vial hook fails to hold samples.

TSP Membrane Degasser

S/N: 103067

Powers on; Solvent Leak light illuminated (likely due to being unconnected during testing, but unconfirmed).

TSP SpectraSYSTEM P2000 Binary Isocratic Pump

Model: P1500

S/N: 105/05727-5

Powers on.

Shimadzu Spectrofluorometric Detector

Model: RF-551

S/N: 70738

Powers on; produced a popping sound and strong burning smell.

Shimadzu UV-VIS Detector

Model: SPD-10A

S/N: 030513

Powers on.

SPARES/REPAIR ITEM

£ 310.00 (ex. VAT) 1 in stock

Fisher Scientific Isotemp 3016S Recirculating Water Bath Spares/Repairs

ITEM-42307

Fisher Scientific Isotemp 3016S Recirculating Water Chiller / Heater

This item was removed from a university laboratory where it was surplus to requirements.

It is in very good cosmetic condition. However, one LED bar on the display screen is not illuminating, which may lead to inaccurate temperature readings during operation.

No additional testing was conducted.

Specifications:

Model: Isotemp 3016S
Serial No.: 110179037

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

Lot of 12 x WPA S106 Spectrophotometers Lab

ITEM-49617

This job lot of items comes from a facility where they were surplus to requirement. They were collected from various store rooms and facilities.

These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

$Image of Teltron Model 580 Tel-X-Ometer X-Ray Diffraction Unit Lab$

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

Teltron Model 580 Tel-X-Ometer X-Ray Diffraction Unit Lab

ITEM-42311

Teltron Ltd Tel-X-Ometer 580 X-Ray Generator Deflection System

This item was removed from a university laboratory where it was surplus to requirements.

It is in very good cosmetic condition, contained in its original packaging.

The lid mechanism operates smoothly, and the deflection holder plate moves without issue around the main dial. It has not been powered on or tested further at our facility.

However, despite the good physical condition, the previous owner reported that although the unit produces x-rays but is not stable enough to be used.

And therefore, is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

Teltron Ltd Tel-X-Ometer 580 X-Ray Generator Deflection System Lab

ITEM-42310

Teltron Ltd Tel-X-Ometer 580 X-Ray Generator Deflection System

This item was removed from a university laboratory where it was surplus to requirements.

It is in very good cosmetic condition, contained in its original packaging.

The lid mechanism operates smoothly, and the deflection holder plate moves without issue around the main dial. It has not been powered on or tested further at our facility.

However, despite the good physical condition, the previous owner reported that the unit does not produce x-rays and is therefore listed as Spares/Repair.

Serial No.: FR04-01

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

Boost-A- Break Break Tank & Pump Set with Type AB Air Gap BTAB 700 Spares/Repair

ITEM-38156

Boost-A- Break Break Tank & Pump Set with Type AB Air Gap BTAB 700.

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up, when powered up the fault light illuminates immediately, due to this we have listed this item as Spares/Repairs.

Fitted with Calpeda MXH 203E Pump.

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

Job Lot of Danish Myo Technology, MYO Interfaces Controllers, Wire Myographs Lab

ITEM-37468

Danish Myo Technology Job Lot of MYO Interfaces Controllers, Wire Myographs

This job lot of items comes from a research facility where they were surplus to requirement. They were collected from various store rooms and facilities.

These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

Included are the following;

2 x MYO-Interface Model 500A

Serial Nos. 591003, 592024

Myo-Interface Model 410A

Serial No. 01120CW4.4

2 x Myograph Controllers

Serial Nos. 591003, 592024

Myograph Data Acquisition unit

Serial No. 4101107

6 x Single wire myographs, one of which is unused and comes with its original packaging

Generally in poor condition with corrosion on the myographs and small components missing.

Included:

3 x Data leads

Manuals:

1 x Myo Interface 310A
1 x Myo Interface 410A
1 x Myo Interface 610M
1 x Myo Myodaq & Myodata
1 x J.P. Trading Myograph Systems

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

METTLER TOLEDO XSR1202S Precision Balance Lab Spares/Repairs

ITEM-35274

METTLER TOLEDO XSR1202S Precision Balance

This was removed from a university lab where it was surplus to requirements.

The unit powers up with a 12V DC supply (not included), but the control buttons are not functioning.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

DW Scientific Automated Spiral Plater w/ Whitley Vacuum Source (WASP) Lab Faulty

ITEM-40986

DW Scientific Whitley Automated Spiral Plater with Whitley Vacuum Source (WASP)

This system was removed from a university lab where it was surplus to requirements.

The unit powered up and read “System Error”. Therefore, it is listed as Spares or Repairs.

Includes the following:

1x DW Scientific Whitley Automatic Spiral Plater with Whitley Vacuum Source

S/N: WA03DB

1x DW Scientific Whitley Vacuum Source

S/N: NV06CM

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

Fisher Scientific Isotemp 3016S Recirculating Water Chiller / Heating Faulty

ITEM-42266

Fisher Scientific Isotemp 3016S Recirculating Water Chiller / Heater

This item was removed from a university laboratory where it was surplus to requirements.

It is in very good cosmetic condition and powers.

However, two LED bars on the display screen are not illuminating, resulting in inaccurate temperature readings during operation.

Therefore, it is listed as Spares/Repair

Specifications:

Model: Isotemp 3016S
Serial No.: 110179038

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

Williams LZ16 Catering Freezer Spares/Repair

ITEM-46203

Williams LZ16 Catering Freezer

This item was removed from a university where it was surplus to requirements.

The freezer is in fairly poor cosmetic condition with marks from use.

However, it has not been tested as it is currently not safe to power on due to exposed internal fan and cables.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

Jouan MR23i BenchTop Centrifuge Faulty Motherboard Lab

ITEM-46344

Jouan MR23i BenchTop Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, however, It is listed as spares or repairs due to a fault with the motherboard of the centrifuge. We are unable to conduct further testing.

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

C1 Electronics Sade-P2 Automatic Tablet CheckWeigher Spares/Repair

ITEM-46591

C1 Electronics Sade-P2 Automatic Tablet CheckWeigher

This item was removed from a university laboratory where it was surplus to requirements.

It powers on but displays a “Zero Failure” message immediately upon startup, accompanied by an alarm. This message cannot be cleared, and the unit cannot proceed to operation.

Therefore, it is listed as Spares/Repair.

It is in reasonably good cosmetic condition.

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

CTC Analytics Leap Technologies HTCPAL Autosampler Spares/Repair Lab

ITEM-46757

CTC Analytics Leap Technologies HTCPAL Autosampler Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, however as displayed the controller screen is damage.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

Biocomp Model 153 Gradient Station ip - Spares/Repair Lab

ITEM-46936

Biocomp Gradient Station IP

This item was removed from a university laboratory where it was surplus to requirements.

It powers on with display and light functions, but does not progress beyond the start-up screen. The controls emit a beep but produce no further response.

Therefore, it is listed as spares or repairs.

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

Sanyo MDF-U32V Ultra Low Temperature Freezer Spares/Repair Lab

ITEM-47745

Sanyo MDF-U32V Ultra Low Temperature Freezer Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, it fails to cool.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

Jouan CR3-22 Benchtop Centrifuge - Spares/Repair Lab

ITEM-48453

Jouan CR3-22 Benchtop Centrifuge - Spares/Repair Lab

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition but does not power on.

Additionally, the lid strut does not remain open.

Due to the issues stated above, this item is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

Varian Cary 100 Bio UV-Visible Spectrophotometer Spares/Repair Lab

ITEM-49703

Varian Cary 100 Bio UV-Visible Spectrophotometer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but fails to power on, it is therefore listed Spares/Repair.

SPARES/REPAIR ITEM

£ 300.00 (ex. VAT) 1 in stock

Nuaire Class 2 Biological Safety Cabinet NU-437-400S Spares/Repair Lab

ITEM-49874

Nuaire Class 2 Biological Safety Cabinet NU-437-400S – Spares/Repair

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition, however, It has failed the Visual PAT due to multiple exposed wires.

The previous owner reported the motherboard as faulty and advised the unit be used for Spares/Repair.

The display module is included but cannot be fixed to the front panel, and the upper front cover is only hooked on rather than permanently secured.

Due to the reasons stated above, this cabinet is listed as Spares/Repair.

Model: NU-437-400S

Please note; The cabinet has no power cable attached, as it was previously hard-wired.

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr with Dungs Gas Valve Train

ITEM-37792

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)

This item was removed from a university lab where it was surplus to requirements.

The burner is in good cosmetic condition. However, the burner control screen has come apart from the control panel and is possibly broken. No testing has been carried out.

Due to the inability of testing and damaged control screen, this item is listed as Spares/Repair.

Specifications:

Model: LPN3/2051
Serial No.: 01333
Manufactured: 11.09.15
Output: 2051 KW/hr (7.0 MBtu/hr)

Includes:

Dungs Gas Train Valve: FRS 5065 gas regulator, VPS 504 leak detector, GF 40065/3 filter
Autoflame Combustion Management System:
Part Nos.: MM10005, MM10004
Serial Nos.: 20368, 051771
TEC Fan Motor:
5.5KW 415 volt
Type: 5.523TECAB35-IE3
T3A 13251-2
Gas Inlet Pipe: 2.5"

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Job Lot of Assorted Agilent HPLC System Parts Lab

ITEM-37770

Job Lot of Assorted Agilent Parts

These were removed from a laboratory where they were surplus to requirements.

All items are untested and are in reasonably good used condition.

Due to the items being untested and missing various parts, this job lot is listed as Spares or Repairs.

All items included:

Dionex Ultimate 3000 Autosampler Injection Valve

P/N - MHP7900-000

S/N - 13756

Yokogawa G1314-66521-VWM Board for Agilent 1100

No Info on Board

Agilent Thermo Waters Systec 9000-1472 ZHCR

P/N - 9000-1472

S/N - 1022482

VEXTA STEPPING MOTOR C7693-9012K-C1

Model - C7693-9012K-C1

ERC-6210 Air Vacuum Pump

Model - ERC-6210

S/N - 963647A-00244C*

MAXON MOTOR DC 526770

Agilent HPLC Standard Flow Cell, 4MPa(40 bar), G1314-60086

S/N - 5487

Sena Parani-SD1000

S/N - 1A2D3E

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Sutter Instrument Co. Model P-87 Flaming / Brown Micropipette Puller Lab

ITEM-37821

Sutter Instrument Co. Model P-87 Flaming / Brown Micropipette Puller

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. However, the side Dale RR-25 25II power resistor produces significant heat and a strong burning smell, and the unit does not heat the capillary puller.

Therefore, it is listed as spares or repair.

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Airwolf 3D NW3D HDX 3-D Printer Lab Spares/Repairs

ITEM-37979

Airwolf 3D NW3D HDX 3-D Printer Lab

This item was removed from a university where it was surplus to requirement.

The back panel is missing and, the wires are exposed, resulting in a visual PAT fail.

Due to the condition stated above, this item is listed as Spares/Repair.

Also included are the following:

Power lead
Data cable

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Job Lot of STOE XRD Crystallography Parts Lab

ITEM-38150

Job Lot of STOE XRD Crystallography Parts Lab

These items were removed from a university where they were surplus to requirement.

All XRD items are in reasonably good cosmetic condition, none of them have been powered or tested.

The PC has been powered on and has the following software installed:

Winxpow Software

No password is required (press 'Cancel' when the computer asks for a password).

This PC runs on Microsoft Windows 95.

This item is also supplied with various keys and power cables.

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

SCOTSMAN AF100 Ice Flaker Machine Lab Spares/Repairs

ITEM-38267

SCOTMAN AF100 Ice Flaker Machine

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has a fault with the evaporation temperature and/or an issue with the auger rotation. It is also leaking water.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Dionex IC25 Chromatograph Lab Spares/Repairs

ITEM-38974

This Dionex IC25 Chromatograph was removed from a university lab where it was surplus to requirements.

The unit powers up but is missing both its CPU and LAN card.

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge Spares/Repairs

ITEM-39217

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge with Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up, but the display screen is faulty, therefore we were unable to test further.

It is in reasonably good cosmetic condition, with marks from use.

It is listed as Spares/Repairs.

Includes the following:

SIGMA 11133 Swinging Bucket Rotor w / 2 x Buckets

Bucket capacity: 4 x 550 ml

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Beckman Coulter Allegra 64R Refrigerated Centrifuge Lab Spares/Repairs

ITEM-39218

Beckman Coulter Allegra 64R Refrigerated Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up, but the display reads the following error:

Error98: "The Error 98 indicates an invalid rotor ID. This can be caused by a malfunctioning rotor sensor, damaged rotor magnets, or bad signal read by the Rotor ID sensor due to oxide dust on the rotor's magnets."

It is in reasonably good cosmetic condition, with marks from use.

It is listed as Spares/Repairs.

Includes the following:

C0650 Fixed-Angle Conical Tube Rotor, Aluminum

Tube Volumes: 50 mL

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Sigma 6K15 Refrigerated Centrifuge Lab Spares/Repairs

ITEM-39753

This Sigma 6K15 Refrigerated Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up but shows "Error 43 (Inbalance offset error)".

It is in good cosmetic condition with minor marks.

Sigma 6K15 Refrigerated Centrifuge

Model: 6K15

Serial#: 89779

Year: 2002

Capacity max: 6x500ml

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

DW Scientific Whitley Automated Spiral Plater (WASP) System Spares/Repairs

ITEM-39864

This DW Scientific Whitley Automated Spiral Plater was removed from a university lab where it was surplus to requirements.

The unit powers up but did not initiate any sort of self-test on start up. The lab advised us it was faulty.

It is sold for spares/repairs.

Additional items included:

Spiral Plater Tool Kit

Vacuum Sealed Pots x 2

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

RMC CR21, CR21 Control, Transformer & Cryochamber Lab

ITEM-39828

RMC CR21, CR21 Control, Transformer & Cryochamber Lab

These items were removed from a university where they were surplus to requirement.

All the units are in reasonably good cosmetic condition. However, they cannot be tested as they all require a connection to the transformer, which is not operational.

Therefore, this listing is sold as Spares/Repair.

All items included are as follows:

Model1#: CR21 Controller

Serial1#: 10521389

Model2#: CR21 Transformer Box

Serial2#: 10521391

Model3#: CR21 Cryochamber

Serial3#: 10521390

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Amersham Biosciences Ettan Spot Picker, Various Parts & Accessories Faulty

ITEM-39895

Amersham Biosciences Ettan Spot Picker

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a PC from another system.

The robot appears to initialise and Home fine. When you try to control it manually, small X,Y & Z movements all seem fine. If you try to send it to a specific location it moves and then shows a 20000 error. 'An internal error has occurred' 'wait for moved failed'. It then needs to re-home again.

We cannot find any info for this error, but it does it every single time.

It is in otherwise good cosmetic condition with minor marks but is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Amersham Biosciences Ettan Digestor System, 215 Liquid Handler, VALVEMATE

ITEM-39894

Amersham Biosciences Ettan Digestor System, 215 Liquid Handler, VALVEMATE

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a PC and software (not included).

The unit fails the initial Homing sequence. It does appear to start Homing and the robot moves, but after a few seconds it stops and makes a buzzing noise, like it is jammed.

It is in good cosmetic condition with minor marks but is sold for spares/repairs.

All additional parts & accessories included:

Ettan Digester Control Software 1.10

Amersham Calibration Plate - SN#: 18-1156-66

Syringe 500uL Digester - SN#: 18-1170-86

Calibration Tool Ettan Digester - SN#: 18-1175-79

Allen Key 1,5mm

Distance Tool Ettan Digester - SN#: 18-1175-55

Ettan Digester Instrument Handbook

Ettan Digester User Manual

Ettan Digester Safety Handbook

Reference Markers 1120pcs - SN#: 18-1143-34

Fuse Drawer 110/120 V

Pre-Cut Aluminium Foil Microplate Sealers - Code#: 676003

Arm Lock

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Scotsman EF156 Easy-Fit Laboratory Ice Machine Lab Spares/Repairs

ITEM-35867

Scotsman EF156 Easy-Fit Laboratory Ice Machine

This was removed from a university lab where it was surplus to requirements.

The unit powers up and works, but has the following issues;

Water is pooling on the housing of the gear motor. It is extremely corroded and may need replacing. We were told that the water seal was leaking causing constant water flow to on board drain pump which is also faulty.

It is in reasonable cosmetic condition with marks from use.

Bin capacity- 60KG

Model- EF 156 Easy Fit A 230/50

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Sartorius Stedim BioSealer Tube Sealer Lab Spares/Repairs

ITEM-35787

Sartorius Stedim BioSealer Tube Sealer

This was removed from a working lab where it was surplus to requirements.

The unit powers up but does not heat.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Beckman Coulter Class II MSC Safety Cabinet - Spares/Repair Lab

ITEM-48749

Beckman Coulter Class II MSC Safety Cabinet Lab

This item was removed from a university where it was surplus to requirement.

This is a Beckman Coulter Class II MSC Safety Cabinet originally used as part of a Beckton Dickinson MoFlo system.

The cabinet is in poor internal cosmetic condition.

The MoFlo system previously housed inside has caused the internal powder coating to flake.

A service card from 2022 indicates that the cabinet failed its service, likely due to a low downflow reading of 0.14 m/s.

It is therefore listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Bright Refrigerated Cryostat SC15B Lab Spares/Repairs

ITEM-25799

This Bright Refrigerated Cryostat SC15B was removed from a university lab where it was surplus to requirements.

The unit powers up but does not respond to inputs.

Both temperature displays and sensors require replacement as well as 3 out of 5 neon switches.

It is in otherwise reasonably good cosmetic condition with marks from use.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Julabo Recirculating Chiller Model: FLW1703GB Lab Spares/Repairs

ITEM-20313

This Julabo FL 1703 Recirculating Chiller Model: FL1703GB was removed from a university lab where it was surplus to requirements.

The item is in reasonable cosmetic condition. It has scratches and stains along its surface.

The unit powers up but requires a replacement compressor.

It is in good cosmetic condition with minor marks.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Nikon BioStation IM With Parts Model-Cell-S1 Lab

ITEM-44884

Nikon BioStation IM With Parts

This system was removed from a university lab where it was surplus to requirements.

The unit is in poor cosmetic condition and cannot be powered on or tested as several parts are missing or not connected.

Therefore, this system is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Mixed Lighting Equipment - Club Scan 250CT Robe, MAC 250TM Light etc

ITEM-44610

Mixed Lighting Equipment - Club Scan 250CT Robe, MAC 250TM Light etc

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

Included are:

8x Stage lights with Blue Filter

2x Stage lights with red Filter

6x Stage lights

4x Club Scan 250CT Robe

1x Robe Colour wash 250AT

2x martin MAC 250TM Light

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Mixed Lighting Equipment - Colour Wash 250AT, PAR-56XY, MAC 250TM

ITEM-44606

Mixed Lighting Equipment - Colour Wash 250AT, PAR-56XY, MAC 250TM etc

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

Included are:

3 x Vision Par 64 Lantern

1 x Stage Lighting PAR-56XY

1 x GLP Impression Light

2 x Pulse Tripod

1 x BeyerDynamic Tripod

1 x Robe Show Lighting Colour Wash 250AT

2x Stage lights with Blue Filter

1 x Martin MAC 250TM Light

1 x Disassembled light

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

JK Lasers Class 4 MS20 Laser & Accessories Lab

ITEM-18384

This JK Lasers Class 4 MS20 Laser was removed from a university lab where it was surplus to requirements.

The unit came to us with a warning notice on it saying it is strictly not to be used or powered up under any circumstances. We suspect the university was removing it from their facilities for H&S reasons.

It is in reasonably good cosmetic condition but has some glue residue on the top of it and the wheels are stiff. There was also no key for the unit so we could not open the cabinet.

Lot contains:

1 x JK Lasers Class 4 MS20 Laser.

1 x Metal Plate.

1 x Shutter/Fire Switch.

1 x YAG Laser Flashlamp/Q-Switch Controller Glued Together.

The unit is sold for spares/repairs. We can only accept business customers for this item and any potential customer will be required to sign a disclaimer during purchase.

All offers considered on the unit.

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

6 x Laerdal Vitalsim Vital Signs Simulators

ITEM-29947

6 x Laerdal Vitalsim Vital Signs Simulators

These were removed from a university lab where they were surplus to requirements.

All main units power on and all of the parts are in reasonable cosmetic condition. Some units are missing parts from the bags, and one does have a broken power connection on the back of the main unit which is also labelled.

They are sold as a spares/repairs lot.

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Bartington MS2WF Magnetic Susceptibility System Lab Spares/Repairs

ITEM-42055

Bartington MS2WF Magnetic Susceptibility System

This system was removed from a university laboratory where it was surplus to requirements.

The units power on and are in good condition with minimal wear. The pumps function correctly, but an alarm sounds on the MS2WFP PSU.

Additionally, the system is missing the MS2 meter and probe.

Therefore, this system is listed as Spares/Repair.

Specifications:

MS2WFP Power Supply Unit
Model: MS2WFP
Serial No.: 134
MS2WF Furnace
Model: MS2WF
Serial No.: 134
MS2W Sensor
Model: MS2W
Serial No.: 150

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

Bartlett Hot Water Commercial Steamer For Catering

ITEM-47148

Bartlett Hot Water Steamer for Catering

This item was removed from a university laboratory where it was surplus to requirements.

This catering steamer is in very poor condition, with significant signs of wear and corrosion present.

Due to its cosmetic condition and the inability to test, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

LiftSafe 60KG Electric Work Positioner Spares/Repair

ITEM-46230

LiftSafe 60KG Electric Work Positioner

This item was removed from a university laboratory where it was surplus to requirements.

The item is in poor cosmetic condition, with significant rust and stiff wheels. Additonally, it did not pass the visual PAT due to exposed wires.

Therefore, it is listed as Spares/Repair.

Workshop

Filters