Explore our Workshop category for a range of spare parts, repair items, and budget-friendly used equipment. Here, you'll find pre-owned items from various categories that may need repair or servicing, all offered at highly accessible prices.


Perfect for those looking for cost-effective solutions, each item has undergone a basic inspection. Please note that some products may require further servicing or repair to be fully functional for research, industrial, or laboratory applications.

Items 251 to 300 of 306

Image of Nuaire NU-5510E CO2 Series 6 Incubator - Faulty CO2 Sensor Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Nuaire NU-5510E CO2 Series 6 Incubator - Faulty CO2 Sensor Spares/Repair Lab

ITEM-42979

Nuaire NU-5510E CO2 Series 6 Laboratory Incubator


This item was removed from a university lab where it was surplus to requirement


It is in good cosmetic condition and has been successfully temperature tested.


However, the CO₂ sensor is faulty and will require replacement.


As a result, CO₂ testing could not be performed, and the item is listed as spares or repair.

Image of Binder CB 150 Incubator - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Binder CB 150 Incubator - Spares/Repair Lab

ITEM-43005

Binder CB 150 Incubator Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and has been successfully temperature tested, however the CO2 system does not inject.


Therefore, it is listed as Spares/Repair.

Image of LMS 250 Refrigerated Incubator - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

LMS 250 Refrigerated Incubator - Spares/Repair Lab

ITEM-43009

LMS 250 Incubator


This item was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition and was successfully temperature tested to 37ºc & 50ºc, however it failed to cool to it's minimum of -10ºc.


Therefore, it is listed as Spares/Repair.

Image of RSBiotech Galaxy R+ 170-300 PLUS Co2 Incubator Spares/Repair

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

RSBiotech Galaxy R+ 170-300 PLUS Co2 Incubator Spares/Repair

ITEM-43117

RSBiotech Galaxy R+ Co2 Incubator Spares/Repair


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, however during testing it failed to reach its maximum temperature of 50ºc.


It is therefore listed as Spares/Repair.

Image of Binder CO2 Incubator C170 Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Binder CO2 Incubator C170 Lab Spares/Repairs

ITEM-45251

Binder Incubator C170


This item was removed from a university where it was surplus to requirements.


The unit powers on and is in fair cosmetic condition, showing signs of general use.


Testing revealed a potential sensor fault and temperature regulation issue, as the temperature did not rise above 14.8°C when set to 37.0°C, and the display incorrectly indicated the door was open despite it being closed and locked.


Due to the faults listed above, this item is listed as Spares/Repair.


Specifications: Model: C170


Image of Thermo Scientific CO2 incubator BB15 Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Thermo Scientific CO2 incubator BB15 Lab Spares/Repairs

ITEM-45101

Thermo Scientific Heraeus CO2 Incubator


This item was removed from a university laboratory where it was surplus to requirements.


It powers on, but the display screen does not activate, and an alarm sounds until the unit is turned off.


Therefore, it is listed as Spares/Repair.


The incubator is in excellent cosmetic condition.


Includes:

  • 3 shelves (47 x 43 cm)
  • Manuals
  • Sample holders

Model: BB15

Serial No.: 40998054

Internal dimensions: D51 W47 H60 cm

Image of Jouan Napco CO2 1000 Incubator Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Jouan Napco CO2 1000 Incubator Spares/Repair Lab

ITEM-45442

Jouan Napco CO2 1000 Lab Incubator


This item was removed from a university laboratory where it was surplus to requirements.


It is in reasonably good cosmetic condition and powers on.


During testing, it successfully reached and stabilized at 37°C. However, it failed to climb any higher when set to 50°C.

Image of Sanyo MCO-17AI Lab Incubator - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Sanyo MCO-17AI Lab Incubator - Spares/Repair Lab

ITEM-45444

Sanyo MCO-17AI Lab Incubator


This item was removed from a university where it was surplus to requirements.


It powers on and is in good cosmetic condition. However, the door handle is broken and the door does not seal properly as displayed.


Therefore, it is listed as Spares/Repair.

Image of Sanyo MC0-19AIC (UV) CO2 Lab Incubator Spares/Repair

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Sanyo MC0-19AIC (UV) CO2 Lab Incubator Spares/Repair

ITEM-45443

Sanyo MC0-19AIC (UV) CO2 Lab Incubator


This item was removed from a university laboratory where it was surplus to requirements.


It is in fair cosmetic condition. The power cable has been cut, therefore, we are unable to power it on or test further.


Note: The last service on this unit failed.


Due to the issues stated above, this incubator is listed as Spares/Repair.


Model: MC0-19AIC



Image of Heraeus CO2 Incubator BB6220 Lab Oven - Spares / Repairs Faulty CO2 Sensor Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Heraeus CO2 Incubator BB6220 Lab Oven - Spares / Repairs Faulty CO2 Sensor Lab

ITEM-47142

Heraeus CO2 Incubator BB6220 Lab Oven - Spares / Repairs Faulty CO2 Sensor Lab


This item was removed from a university lab where it was surplus to requirement.


It is in reasonably good cosmetic condition and has been successfully temperature tested, however further testing could not be conducted due to it having a faulty CO2 sensor.


Therefore, it is listed as Spares/Repair.

Image of Gallenkamp IPR150.XX1.5 Laboratory Incubator Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Gallenkamp IPR150.XX1.5 Laboratory Incubator Spares/Repair Lab

ITEM-46905

Gallenkamp IPR150.XX1.5 Laboratory Oven Lab


This item was removed from a university laboratory where it was surplus to requirements.


It powers on and is in reasonably good cosmetic condition. However, during testing, the display screen was erratic, jumping between numbers, which prevented further testing.


This item is listed as Spares/Repair.

Image of RS Biotech Galaxy R+ 170-300 PLUS Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R+ 170-300 PLUS Incubator Lab Spares/Repairs

ITEM-47194

RS Biotech Galaxy R+ 170-300 PLUS Incubator (Spares/Repairs)


This item was removed from a university lab where it was surplus to requirements.


It is in good cosmetic condition and has been successfully temperature tested.


However, the outer door seal is split, and the door has snapped off the hinge.

Therefore, it is listed as Spares/Repairs.


Please note: This item has not been CO₂ tested.

Image of Kendro Heraeus Model HERAcell 150 CO2 Incubator Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Kendro Heraeus Model HERAcell 150 CO2 Incubator Spares/Repair Lab

ITEM-47520

Kendro Heraeus HERAcell 150 CO2 Incubator Lab


This item was removed from a university where it was surplus to requirement.


The unit powers up and is in good cosmetic condition, however, during testing it failed CO2 calibration.


Therefore, it is listed as Spares/Repair.

Image of RS Biotech Galaxy R+ 170-300 PLUS Incubator Spares/Repairs Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R+ 170-300 PLUS Incubator Spares/Repairs Lab

ITEM-47195

RS Biotech Galaxy R+ 170-300 PLUS Incubator Lab Spares/Repairs


This item was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition and has been successfully temperature tested, however the outer door seal has split and door has snapped off the hinge


Therefore, it is listed as Spares/Repair.


Please note; This item has not been CO2 tested.

Image of Percival I-30VL Floor Standing Growth Chamber Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Percival I-30VL Floor Standing Growth Chamber Spares/Repair Lab

ITEM-48666

Percival I-30VL Floor Standing Growth Chamber


This item was removed from a university laboratory where it was surplus to requirements.


It powers on, but the main control panel display is not functioning, so conditions cannot be set.


For this reason, it is listed as Spares/Repairs.


Supplied with a user manual.


Image of Leec GA2000 CO2 Incubator - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Leec GA2000 CO2 Incubator - Spares/Repair Lab

ITEM-48547

Leec GA2000 CO2 Incubator - Spares/Repair Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, however, during testing it failed to heat to 37ºc.


Therefore, it is listed as Spares/Repair.

Image of Percival I-30VL Floor Standing Growth Chamber Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Percival I-30VL Floor Standing Growth Chamber Spares/Repair Lab

ITEM-48668

Percival I-30VL Floor Standing Growth Chamber Lab


This item was removed from a university laboratory where it was surplus to requirements.


The unit it in good cosmetic condition and powers on, however, the main control panel does not display, preventing further testing.


Therefore, it is listed as Spares/Repair.


Includes:

  • Intellus Web Server Manual
  • WeatherEze Software Manual

Model: I-30VL

Image of Percival - I-30VL Floor Standing Growth Chamber Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Percival - I-30VL Floor Standing Growth Chamber Spares/Repair Lab

ITEM-48670

Percival - I-30VL Floor Standing Growth Chamber Spares/Repair Lab


This item was removed from a university where it was surplus to requirement.


It in reasonably good cosmetic condition and powers on, however, during testing it failed to heat.


Therefore, it is listed as Spares/Repair.

Image of Percival Model I-30VL Floor Standing Growth Chamber Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Percival Model I-30VL Floor Standing Growth Chamber Spares/Repair Lab

ITEM-48669

Percival Model I-30VL Floor Standing Growth Chamber – Spares/Repair


This item was removed from a university where it was surplus to requirements.


It is in reasonably good cosmetic condition, however, during testing the display screen did not power on, and the plug was found to be faulty.


As a result, it is sold as Spares/Repair.

Image of Percival I-30VL Floor Standing Growth Chamber - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Percival I-30VL Floor Standing Growth Chamber - Spares/Repair Lab

ITEM-48672

Percival Type I-30VL Floor Standing Growth Chamber – Spares/Repair


This item was removed from a university laboratory where it was surplus to requirements.


It powers on and is in good cosmetic condition, however the display screen does not function.


It is therefore listed as spares/repair.

Image of Percival Type I-30VL Floor Standing Growth Chamber Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Percival Type I-30VL Floor Standing Growth Chamber Spares/Repair Lab

ITEM-48671

Percival Type I-30VL Floor Standing Growth Chamber – Spares/Repair


This item was removed from a university laboratory where it was surplus to requirements.


It powers on and is in good cosmetic condition, however the display screen does not function. It is therefore listed as spares/repair.


Includes:

  • User Manual
  • IntellusUltra & IntellusUltra Connect Controller Manual

Model: Type I-30VL

Image of Percival I-30VL Floor Standing Growth Chamber S/R Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Percival I-30VL Floor Standing Growth Chamber S/R Lab

ITEM-48673

Percival Type I-30VL Floor Standing Growth Chamber – Spares/Repair


This item was removed from a university laboratory where it was surplus to requirements.


It is in reasonably good cosmetic condition but failed to power on, it is therefore listed as Spares/Repair.

Image of Thermo Scientific MaxQ 5000 Shaking Incubator Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 5000 Shaking Incubator Spares/Repair Lab

ITEM-49280

Thermo Scientific MaxQ 5000 Shaking Incubator Spares/Repair Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition but does not power on. It requires a new motor control PCB.


Therefore, it is listed as Spares/Repair.

Image of Percival I-30VL Floor Standing Growth Chamber Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Percival I-30VL Floor Standing Growth Chamber Spares/Repair Lab

ITEM-48675

Percival I-30VL Floor Standing Growth Chamber Spares/Repair Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, however there is no display on the control panel.


Therefore, it is listed as Spares/Repair.

Image of Nuaire DH Autoflow CO2 Air-Jacketed Incubator Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Nuaire DH Autoflow CO2 Air-Jacketed Incubator Spares/Repair Lab

ITEM-49730

Nuaire DH Autoflow CO2 Air-Jacketed Incubator Spares/Repair Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, however, during testing it failed the CO2 test.


Therefore, it is listed as Spares/Repair.

Image of Sanyo MIR-553 Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Sanyo MIR-553 Incubator Lab Spares/Repairs

ITEM-36207

Sanyo MIR-553 Incubator


This was removed from a university lab where it was surplus to requirements.


The unit powers up but the power relay is short circuited so it runs overtemp.


It is sold for spares/repairs.

Image of Infors HT Unitron Laboratory Incubator Shaker Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Infors HT Unitron Laboratory Incubator Shaker Lab Spares/Repairs

ITEM-17279

This Infors HT Unitson Laboratory Incubator Shaker was removed from a university lab where it was surplus to requirements.


The unit powers up, but it immediately blows the trip switch in our testing room. We were unable to determine the fault, but it could be a panel or motor issue.


It is in good cosmetic condition but has some minor usage marks. The shaker bed is also in very good condition and had many flask grips installed. It moves easily by hand and is not seized.

Image of VWR INCU-Line ILS6 Shaking Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

VWR INCU-Line ILS6 Shaking Incubator Lab Spares/Repairs

ITEM-37008

This VWR INCU-Line ILS6 Shaking Incubator was removed from a university lab where it was surplus to requirements.


The incubation functions work well, but the shaker motor is broken.


It is in good cosmetic condition with minor marks.


It is sold for spares/repairs.

Image of Nuaire IR Direct Heat Incubator Model-NU-5510E Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Nuaire IR Direct Heat Incubator Model-NU-5510E Lab Spares/Repairs

ITEM-37275

Nuaire IR Direct Heat Incubator Model-NU-5510E Lab


This item was removed from a university where it was surplus to requirements.


The unit powers up and has been successfully temperature tested.


However, due to a suspected CO2 Sensor/Air Pump fault, this item is listed as Spares/Repair.

Image of Precisions Scientific Napco 5420-1 Incubator Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Precisions Scientific Napco 5420-1 Incubator Lab

ITEM-37321

Precision Scientific Napco 5420-1 Incubator Lab


This item was removed from a university laboratory where it was surplus to requirements.


It powers up and is in good cosmetic condition, but due to a faulty fan, it does not maintain accurate temperatures.


As a result, this unit is listed as Spares/Repair.

Image of Nuaire IR Direct Heat Incubator Model No. NU-5510E Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Nuaire IR Direct Heat Incubator Model No. NU-5510E Lab

ITEM-37276

Nuaire IR Direct Heat Incubator Model-NU-5510E Lab


This item was removed from a university where it was surplus to requirements.


The unit powers up and has been successfully temperature tested.


However, due to a suspected CO2 Sensor/Air Pump fault, this item is listed as Spares/Repair.

Image of Carbolite Laboratory Incubator PIF120 Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Carbolite Laboratory Incubator PIF120 Lab

ITEM-37440

Carbolite Incubator PIF120


This was removed from a university where it was surplus to requirements.


It is in reasonably good cosmetic condition.


The glass door is detached from the unit, as shown in the pictures. The adhesive has come loose on the top and bottom hinges, therefore it is sold as Spares or Repairs

Image of Percival I-66VL Floor Standing Growth Chamber Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Percival I-66VL Floor Standing Growth Chamber Spares/Repair Lab

ITEM-48676

Percival I-66VL Floor Standing Growth Chamber (Spares/Repair)


This item was removed from a university laboratory where it was surplus to requirements.


It powers on and heats up to 37°C, but it does not cool, therefore it is listed as spares/repair.


Includes:

  • User manual

Model: I-66VL

Image of Heraeus Hera Cell 150 Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Heraeus Hera Cell 150 Incubator Lab Spares/Repairs

ITEM-45432

Heraeus Hera Cell 150 Incubator Lab


This item was removed from a university lab where it was surplus to requirement.


The incubator powers on but does not heat when a temperature is set.

The auto-run light flashes continuously, indicating a possible fault.


Therefore, we are unable to conduct further testing, and this item is listed as Spares/Repair.

Image of RS Biotech Galaxy R CO2 Laboratory Incubator Model 300 Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R CO2 Laboratory Incubator Model 300 Lab Spares/Repairs

ITEM-45447

RS Biotech Galaxy R CO2 Laboratory Incubator Model 300 Lab Spares/Repairs


This item was removed from a university lab where it was surplus to requirement.


It is in reasonably good cosmetic condition and powers on, however, the control screen is not functional.


Therefore, further testing could not be conducted, and the item is listed as Spares/Repair.


Specifications;

  • Model: 300
  • S/N: 9691




Image of RS Biotech Galaxy S 200 Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

RS Biotech Galaxy S 200 Incubator Lab Spares/Repairs

ITEM-45441

SLS Galaxy S 200 Incubator Lab


This item was removed from a university where it was surplus to requirement.


The unit powers up and the incubation is in good working order, but it has an issue with its CO2 sensor.

Image of Binder Model CB 150 CO2 Laboratory Incubator Lab - Faulty Screen

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Binder Model CB 150 CO2 Laboratory Incubator Lab - Faulty Screen

ITEM-45448

Attributes not completeBinder Model CB 150 CO2 Laboratory Incubator Lab - Faulty Screen


This item was removed from a university lab where it was surplus to requirement.


It is in reasonably good cosmetic condition and powers on, however, the control screen is not functional.


Therefore, further testing could not be conducted, and the item is listed as Spares/Repair.


Specifications;

  • Model: CB 150
  • SN: 07-27207

Features;

  • Inside dimensions: D50 x W50 x H59cm
  • 3 x Shelves - 44.5 x 49.5cm

Image of Heraeus Hera Cell 150 Lab Incubator No CO2 Filter Port - Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Heraeus Hera Cell 150 Lab Incubator No CO2 Filter Port - Spares/Repairs

ITEM-45454

Heraeus Hera Cell 150 Lab Incubator


This item was removed from a university lab where it was surplus to requirement.


The unit powers up and has been successfully temperature tested.


However, it is listed as Spares/Repair as it requires a CO2 filter port and is missing the inner door lock.


It is in good cosmetic condition.


Specifications;

  • Model-Hera Cell 150
  • S/N-99103965

Image of Heraeus Hera Cell 150 Lab Incubator Faulty - No CO2 Filter Port - Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Heraeus Hera Cell 150 Lab Incubator Faulty - No CO2 Filter Port - Spares/Repairs

ITEM-45452

Heraeus Hera Cell 150 Lab Incubator


This item was removed from a university laboratory where it was surplus to requirements.


It powers on and is in good working order.


However, it requires a CO2 filter port and is listed as spares or repair. It was tested using a CO2 port from another unit.


It is in good cosmetic condition.

Image of Kendro Heraeus HERAcell 150 CO2 Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Kendro Heraeus HERAcell 150 CO2 Incubator Lab Spares/Repairs

ITEM-46285

Kendro Heraeus HERAcell 150 CO2 Incubator Lab


This item was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition and powers on, however it did not rise in temperature during testing. The former owner reported a motherboard fault.


Therefore, it is listed as Spares/Repair.

Image of Nuaire Model NU-5510E Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Nuaire Model NU-5510E Incubator Lab Spares/Repairs

ITEM-46173

Nuaire NU-5510E Incubator Lab


This item was removed from a university where it was surplus to requirement.


The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.


Therefore, it is listed as Spares/Repair.

Image of Heraeus HERAcell 150 CO2 Incubator - Water Sensor Fault S/R Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Heraeus HERAcell 150 CO2 Incubator - Water Sensor Fault S/R Lab

ITEM-46569

Heraeus HERAcell 150 CO2 Incubator - Water Sensor Fault S/R Lab


This item was removed from a university lab where it was surplus to requirement.


It is in good overall cosmetic condition and has been successfully temperature tested, however, the previous owner stated it has a faulty water sensor.


Therefore, it is listed as Spares/Repair.


Additionally, this unit has not been CO2 tested.

Image of Kendro Heraeus HERAcell 150 CO2 Incubator Spares/Repairs - No IEC Port Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Kendro Heraeus HERAcell 150 CO2 Incubator Spares/Repairs - No IEC Port Lab

ITEM-46286

Kendro Heraeus HERAcell 150 CO2 Incubator


This item was removed from a university laboratory where it was surplus to requirements.


The unit is unable to be powered on as the IEC port has been removed, by the previous owner. Therefore, it is listed as Spares/Repair.


It is in fair cosmetic condition but the door latch has been removed.


Includes a stand.


Model: HERAcell 150

Image of Heraeus Heracell 150 CO2 Incubator Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Heraeus Heracell 150 CO2 Incubator Spares/Repair Lab

ITEM-46574

Heraeus Heracell 150 CO2 Incubator – Spares/Repair


This item was removed from a university where it was surplus to requirement.


It is in reasonably good cosmetic condition and has been temperature tested successfully.

However, during CO2 testing it failed to accept CO2 and is therefore sold as Spares/Repair.


Model: Heracell 150

Image of RS Biotech Galaxy R 170-300 Incubator - Spares/Repair No Solenoid Valve

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R 170-300 Incubator - Spares/Repair No Solenoid Valve

ITEM-46628

RS Biotech Galaxy R 170-300 Incubator - Spares/Repair


This item was removed from a university lab where it was surplus to requirements.


It is in good cosmetic condition and has been successfully temperature tested.


However, it is missing a solenoid valve and could not be tested for CO₂ functionality. As such, it is being sold for Spares/Repair.

Image of Nuaire DHD Autoflow Co2 Air-Jacketed Incubator NU-5510E - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Nuaire DHD Autoflow Co2 Air-Jacketed Incubator NU-5510E - Spares/Repair Lab

ITEM-46618

Nuaire DHD Autoflow Co2 Air-Jacketed Incubator NU-5510E - Spares/Repair Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and has been successfully temperature tested, however, it fails to draw CO₂.


Therefore, it is listed as Spares/Repair.

Image of Binder CB 150 CO2 Incubator - Faulty Screen - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Binder CB 150 CO2 Incubator - Faulty Screen - Spares/Repair Lab

ITEM-46630

Binder CB 150 CO2 Incubator – Spares/Repair (Faulty Screen)


This item was removed from a university lab where it was surplus to requirements.


It is in reasonably good cosmetic condition and has been temperature tested. However, the screen is faulty and difficult to read, which meant CO2 testing was not possible.


As a result, it is listed for Spares/Repair.

Image of RS Biotech Galaxy R 170-300 Incubator Spares/Repair No Solenoid Valve

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R 170-300 Incubator Spares/Repair No Solenoid Valve

ITEM-46629

RS Biotech Galaxy R 170-300 Incubator - Spares/Repair


This item was removed from a university lab where it was surplus to requirements.


It is in good cosmetic condition and powers on.


However, it is missing a solenoid valve and could not be tested for CO₂ functionality, and when temperature tested it failed to reach Max temp 50ºc.


As such, it is being sold for Spares/Repair.

Image of Heraeus CO2 Incubator Type BB 6220 CO2 - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 75.00 (ex. VAT) 1 in stock

Heraeus CO2 Incubator Type BB 6220 CO2 - Spares/Repair Lab

ITEM-46745

Heraeus CO2 Incubator Type BB 6220 CO2 Lab


This item was removed from a university lab where it was surplus to requirement.


The unit powers up, however it fails to draw CO2.


Therefore, it is listed as Spares/Repair.


It is in good overall cosmetic condition.

Image of Scilabub Dry Ice Chest Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 70.00 (ex. VAT) 1 in stock

Scilabub Dry Ice Chest Spares/Repair Lab

ITEM-48691

Scilabub Dry Ice Chest


This item was removed from a university laboratory where it was surplus to requirements.


The item is in poor cosmetic condition.


The hinges are broken or missing screws, meaning it cannot remain open without being physically held.


Therefore, it is listed as Spares/Repair.



Items 251 to 300 of 306

Filters

Price (£)

to

Condition