Centrifuges

£ 2,625.00 (ex. VAT) 1 in stock

Beckman Avanti J-20XP High Capacity Centrifuge Lab

ITEM-14670

Beckman Coulter Avanti J-20XP.

Unit was removed from a lab as surplus to requirements. It was previously used in a university teaching lab - but was no longer required. It had an inspection and parts maintenance on 19/10/20.

At our site we have not tested it because we do not have a 32A socket - but we do not anticipate any issues with the unit as we were assured it is working.

Appears to be in reasonable cosmetic condition.

Does have scratches and marks here and there.

The back metal panel is also a little bit bent and dented.

No rotor included.

£ 90.03 (ex. VAT) 1 in stock

MSE Micro Centaur Centrifuge Lab Laboratory Equipment Mini Benchtop

ITEM-06814

Reasonable condition
From a top UK University
Tested and runs smoothly and quietly.

£ 164.03 (ex. VAT) 1 in stock

2x Faulty Sorvall EconoSpin Bench-top Centrifuge + Rotors Spares / Repairs

ITEM-04696

The 2 Centrifuges do power on but have problems with lid catches and do not spin.

One is missing a dial.

Both rotors have 4 swinging buckets and a Max RPM 4000

£ 160.76 (ex. VAT) 1 in stock

2x Laboratory Centrifuge Rotors With tubes and accessories

ITEM-10217

These rotors were removed from a lab during a clearout.

The rotors do not have any details on them.

They have not been tested.

£ 64.31 (ex. VAT) 1 in stock

2x Sorvall 11053 Centrifuge Rotor Buckets With Inserts

ITEM-10522

2x Sorvall 11053 with Insert

2x Sorvall Other Buckets with insert

These were removed from a lab during a clearout. They have not been tested.

£ 80.38 (ex. VAT) 1 in stock

2x Thermo Scientific mySPIN 12 Mini Centrifuge Spares Repairs

ITEM-08435

Both of these units were removed from a lab during a clearout.

Neither unit powers up and so both are sold as spares / repairs.

This listing is for both units.

£ 135.38 (ex. VAT) 1 in stock

36x Centrifuge Buckets/Tubes Holder Lab

ITEM-12729

This lot was removed from a lab store during a clearout.

The buckets have not been tested so must be safety inspected prior to use.

16 Red units 19 x 19mm holders. Each unit is 41mm high. 10cm across

4 Green Units 27 x 15mm holders. 40mm high 10cm across

6 Black bases 7mm thick and 10cm across.

10 Metal holders- 13cm long and 10cm wide.

£ 203.06 (ex. VAT) 1 in stock

4x Eppendorf Lab Centrifuge Microplate Rotor Buckets for A-4-62

ITEM-12727

These buckets fit the Eppendorf A-4-62 rotor.

4 x buckets included as shown.

The buckets have not been tested.

£ 209.84 (ex. VAT) 1 in stock

4x Eppendorf Centrifuge Microplate Rotor Buckets for A-4-62 Lab

ITEM-12726

These buckets fit the Eppendorf A-4-62 rotor.

4 x buckets included as shown.

The buckets have not been tested.

£ 82.01 (ex. VAT) 1 in stock

ALC 4202 Micro Benchtop Centrifuge Lab Spares / Repair

ITEM-10885

This unit was removed from a lab during a clearout.

The unit does power on, but our team were unable to get it to run / spin therefore it is sold as spares / repair.

£ 164.03 (ex. VAT) 1 in stock

ALC PK 121R Centrifuge Refrigerated Benchtop Centrifuge Lab

ITEM-07330

This unit was removed from a lab as surplus to requirements.

At our site we tested it to around 2000rpm then the error E02 popped up - we do not know if this means the unit faulty, or if its because there was no rotor.

There is no rotor included.

£ 525.00 (ex. VAT) 1 in stock

ALC PK110 Benchtop Laboratory Centrifuge + F-G3 Rotor Lab

ITEM-07924

This item was removed from a lab as surplus to requirements. We have tested the unit and easily and smoothly reached 4,000rpm as expected but we havn't tested it fully with samples over a long-duration etc. However, the lab assured us that the unit was in full working order prior to removal. Therefore if you encounter any issues with the system we will offer you a full refund and cover return postage costs.

The only issue with the unit is the lid does not stay up making sample loading a little more awkward.

£ 675.00 (ex. VAT) 1 in stock

ALC PK121 Benchtop Centrifuge + T515 Bucket Rotor and T517 Microplate Rotor

ITEM-14637

Removed from a university lab as surplus to their requirements.

Unit powers on and is in good condition.

The rotor fitted inside will only go up to 4,000rpm not the 4,300rpm written on the rotor but seems to run well otherwise.

A second rotor with plate buckets attached is included, as well a manual and service log.

Unit is very quiet and runs well.

Buckets are 60mm wide and their inserts 30mm wide.

£ 533.08 (ex. VAT) 1 in stock

ALC PK121R Refrigerated Benchtop Centrifuge With Rotor

ITEM-09597

This unit was removed from a lab as surplus to requirements. It was tested to 4100rpm (max of rotor) and 4degrees with no problems.

£ 643.03 (ex. VAT) 1 in stock

Align Arrows / Beckman Coulter JS-131 6 Tube Centrifuge Rotor Lab

ITEM-09953

This unit was removed from a university lab as its age was beyond the recommended serviceable life.

We have not tested the rotor, and due to its age it should be safety inspected by a competent individual prior to use.

£ 176.83 (ex. VAT) 1 in stock

Appligene Heating Benchtop Centrifuge + Univapo Rotor Typ 72-11 Lab

ITEM-04706

This unit was removed from a university store room as surplus to requirements.

The unit runs at a fixed speed, and heats to 37-40C.

The rotor tube holes are 11.5mm wide and 17mm long with 72 holes.

£ 303.75 (ex. VAT) 1 in stock

Beckman Coulter Allegra 25R Benchtop Centrifuge Refrigerated

ITEM-06386

This Beckman Centrifuge came out of lab as surplus to requirements.

We tested it without any rotor fitted and it appeared to run smoothly up to 3000rpm. However we did not test it with a rotor (no rotor included).

When closed the lid seems to seal tight and lid mechanism is working well.

Refrigeration clearly runs, but we put in our temp probe and it reached -24 when dial was only reading -1. So the compressor might be overcooling, or it might just be the position we inserted the probe versus where the units built in thermostat is located.

£ 479.06 (ex. VAT) 1 in stock

Beckman Coulter Centrifuge Rotor Type 70.1 Ti Fixed-Angle Titanium

ITEM-09802

This unit was removed from a lab as surplus to requirements.

We were assured the unit is working, but it may now be beyond its service date so should be inspected by a competent professional prior to use.

£ 375.00 (ex. VAT) 1 in stock

Beckman Coulter GS-6R Benchtop 3750 RPM Refrigerated Centrifuge Lab 1-98 Rotor

ITEM-12993

This unit was removed from a lab as surplus to requirements.

At our site we tested the unit and refrigeration appears to work well. We are not sure if the unit is intended to heat, or whether setting a temperature only prevents refrigeration coming in, but the unit does not actively heat.

We ran the unit to 3,000rpm, at which point it was still running but was quite loud - so probably requires some servicing.

£ 1,692.19 (ex. VAT) 1 in stock

Beckman Coulter J-LITE JLA-10.500 Centrifuge Rotor + Canisters 10000rpm Lab

ITEM-09982

This rotor was removed from a university lab as it is beyond the age of recommend use by Beckman.

Due to the rotors age it must be safety inspected by a competent individual prior to use.

Filter products

Centrifuges