Centrifuges

SPARES/REPAIR ITEM

£ 800.00 (ex. VAT) 1 in stock

Thermo Scientific Sorvall Discovery M120 SE Centrifuge Spares/Repairs

ITEM-35813

This was removed from a university lab where it was surplus to requirements

THe unit powers up but shows error 48 which is a door lock error. It seems like the door solenoid is not being sent a signal.

It is sold for spares/repairs.

No rotor included.

£ 760.00 (ex. VAT) 1 in stock

Heraeus Labofuge 400 Function Line Benchtop Centrifuge 3500rpm Max Lab

ITEM-36950

Heraeus Labofuge 400 Function Line Benchtop Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs smoothly up to 3500rpm.

It is in reasonable cosmetic condition with light marks and rusting.

Heraeus Rotor #8179

4 x Buckets #8172 Ch.003515

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Beckman L7-65 Ultracentrifuge Lab Spares/Repairs

ITEM-29720

This Beckman L7-65 Ultracentrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and runs well, but the cooling system does not work.

It is in good cosmetic condition with minor marks.

It is sold for spares/repairs.

£ 750.00 (ex. VAT) 1 in stock

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge with 6000rpm Rotor Lab

ITEM-40061

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs well to 6000rpm. It also cools and incubates as it should.

It is in good cosmetic condition with minor marks.

It is supplied with;

MSE Rotor 43124-141

SN - 7962

Max RPM - 6000

4 x Buckets

4 x Beige Adaptors hold 1 x 50ml tube each

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Sorvall RC-5C+ Plus Floorstanding Centrifuge Lab Spares/Repairs

ITEM-41038

This Sorvall RC-5C Plus Floor-Standing Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up, but shortly after running it produces error code 7 preventing it from being tested, therefore this item is sold as Spares or Repairs.

Error 7 = REFRIGERATION SYSTEM FAILURE There was no apparent drop in chamber temperature thirty seconds after the refrigeration system started to cool. Notify your Thermo Field Service Engineer.

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Sorvall OTD-COMBI Ultracentrifuge w/ Sorvall T-865.1 Rotor Spares/Repair Lab

ITEM-41834

Sorvall OTD-COMBI Ultracentrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on. However, the door unlock switch is non-functional, therefore, preventing the unit's ability to lock or open the door.

We were able to open it manually, but the automatic door open function is faulty.

Therefore, it is listed as Spares/Repair.

Also includes the following:

Dupont Instruments Sorvall T-865.1 Rotor.

Serial No: 9330329.

8 Hole rotor.

Tube dimensions: 1.5cm x 8cm.

RECERTIFIED ITEM

£ 730.00 (ex. VAT) 1 in stock

Durafuge 100 Precision Centrifuge Cat no. 51231201 with SO-1X Rotor Lab

ITEM-26173

Durafuge 100 Precision Centrifuge Cat no. 51231201 with SO-1X Rotor

This was removed from a university lab where it was surplus to requirements.

It has been tested by a service engineer and is in full working order. It is in very good cosmetic condition with only minor marks from use. A brand new gas strut was fitted by the engineer.

Rotor - Precision SO-1X

Cat no. 51231203

4 x Swinging buckets - SO-1X

Cat no. 51231221

SN - 1302/01

4 x Adaptors to fit 15ml tubes

Cat no. 51231208

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Carl Padberg Zentrifugenbau Filter Centrifuge LE Lab Spares/Repairs

ITEM-36357

This Carl Padberg Zentrifugenbau LE was removed from a university lab where it was surplus to requirements.

The cosmetic condition of this item is fairly good and it has powered on.

We set the unit to 20,000rpm. It does ramp up quite slowly to speed. It reached 21,000+ and started to hold speed.

We're not sure how accurate the speed adjustment is. It didn't seem to fully hold at 20,000rpm, it kept slowly rising. The belt looks like it needs replacing too.

For this reason, It is sold for spare/repairs

The speed range is from 15000 to 40000 rpm.

Additionally included:

1x New Brunswick Scientific power supply switching/speed selection unit

1x Huber and Moser motor

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Beckman L8-60MR Ultracentrifuge Lab Spares/Repairs

ITEM-39709

Beckman L8-60MR Ultracentrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and was tested with a Beckman 70.1 Ti rotor from another item (Not included), but would not reach over 3000rpm (Rotor max is 10000). We suspect there is a vacuum issue as the vacuum light flashed red during testing. The system also will not cool down.

It is in otherwise good cosmetic condition.

It is sold for spares/repairs.

Beckman L8-60MR Ultracentrifuge

Model: L8-60MR

Serial#: 6H816

Year: 1988

£ 680.00 (ex. VAT) 1 in stock

Jouan BR3.11 Refrigerated Benchtop Centrifuge Lab

ITEM-29891

This Jouan BR3.11 Refrigerated Benchtop Centrifuge was removed from a university lab where it was surplus to requirements

The unit powers up and is in good working order, but the lid has to be opened manually. The automatic switch is broken

It is in good cosmetic condition with minor marks.

Rotor Arm:

Max Load 2.8kg

Max RPM 5150

Buckets x 2:

Dimensions L5.5cm x W5.5cm x H9.5cm

Rotor:

Part No. 803

6 Hole

Dimensions L2cm x W2cm x H4cm

£ 650.00 (ex. VAT) 1 in stock

Heraeus Biofuge Haemo Centrifuge with 1067 Haematocrit Dish Rotor Lab

ITEM-25993

This Haraeus Biofuge Haemo Centrifuge was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks from use. It is in full working order, running up to 13000rpm.

It is fitted with a plate rotor.

£ 630.00 (ex. VAT) 1 in stock

Beckman J2-21 Floor Standing Centrifuge 20000rpm Max Lab

ITEM-20251

This Beckman J2-21 Floor Standing Centrifuge was removed from a university lab where it was surplus to requirements.

We have replaced the lid and repaired an area of cracked plastic underneath it. It is very stable. There are some cracks around the gas strut area. They do not appear to affect the operation of the unit.

The unit is functional and has a comprehensive service history.

The centrifuge holds a vacuum well and has been tested at:

5,000rpm

10,000rpm

15,000rpm

20,000rpm (Max).

It ran fine at all these speeds but the needle isn't totally in sync with the control knob.

It has been tested at the following temperatures:

0ºC our thermometer read -15.8ºC

20ºC our thermometer read 21.2ºC

It appears to probably have a cooling issue. The compressor etc runs fine. It just appears to drop lower than it is set. When set to higher temps, it takes quite a while to heat up.

£ 630.00 (ex. VAT) 1 in stock

Sanyo MSE Mistral 2000R Benchtop Refrigerated 4500rpm Centrifuge Lab

ITEM-31287

Sanyo MSE Mistral 2000R Benchtop Refrigerated 4500rpm Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order up to 4500rpm. It refrigerated well. It is in good cosmetic condition with minor marks from use. (Digital thermometer not included.)

The buckets have 2 x (6 x 15 mil) & 2 x (1 x 50 mil) adapters.

SPARES/REPAIR ITEM

£ 600.00 (ex. VAT) 1 in stock

Sorvall Legend RT Centrifuge w/ 4600rpm Swinging Arm Rotor Lab Spares/Repairs

ITEM-36501

Sorvall Legend RT Centrifuge

This system was removed from a university lab where it was surplus to requirements.

The unit powers on, but it shows Error 21 when attempting to spin, causing the unit to cut out. The refrigeration system functions well, and the unit is in good cosmetic condition with minor marks.

Due to the error, this item is listed as Spares/Repair.

The unit is fitted with the following rotor:

Sorvall Rotor
P/N: 75006445
S/N: 004061

Includes:

4 x Sorvall Swinging Buckets
P/N: 75015679

SPARES/REPAIR ITEM

£ 600.00 (ex. VAT) 1 in stock

Beckman Optima L-60 Floor Standing Centrifuge Lab Spares/Repairs

ITEM-42198

Beckman Optima L-60 Floor Standing Centrifuge

This item was removed from a university lab where it was surplus to requirements.

The centrifuge powers on and is in good cosmetic condition.

However, during testing, the display read the following message:

"DRIVE", preventing it from running a cycle.

Therefore, it is listed as Spares/Repair.

There is no rotor included.

Specifications:

Speed: 1,000 - 60,000 rpm
Temperature: 0˚C - 40˚C

Model: Optima L-60

Serial No.: L1M602

Rotational Counter: 417,132 x 10,000 rotations

£ 575.00 (ex. VAT) 1 in stock

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge with 6000rpm Rotor Lab

ITEM-30455

This Sanyo MSE Harrier 18/80 Refrigerated Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and is in reasonably good cosmetic condition with marks from use.

It is in full working order. The rotor spins up to 6000rpm and the refrigeration works and has been tested at 4˚C and -9˚C.

MSE Rotor 43124-141

Max RPM - 6000

4 x Buckets

4 x Yellow Adaptors hold 1 x 50ml tube each

RECERTIFIED ITEM

£ 570.00 (ex. VAT) 1 in stock

Sigma 1-15K Refrigerated Benchtop Centrifuge Lab

ITEM-30220

This Sigma 1-15K Refrigerated Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit has been recertified by a service engineer. It is in full working order. It has had a new gas strut fitted, but the lid can get stuck. Once it is opened it will repeatedly open, but when left for an amount of time it can get stuck again.

It is in excellent cosmetic condition with some minor marks from use.

RECERTIFIED ITEM

£ 555.00 (ex. VAT) 1 in stock

Thermo Electron Corporation Jouan C 4i Benchtop Centrifuge w/ 4750rpm Rotor Lab

ITEM-31858

This Thermo Electron Corporation Jouan c4i Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. The rotor is created for 4750rpm, but the unit's max speed with M4 buckets is 4000rpm.

It is in good cosmetic condition with minor marks from use.

£ 550.00 (ex. VAT) 1 in stock

Sanyo MSE Mistral 2000R Refrigerated Benchtop Centrifuge with 4500rpm Rotor Lab

ITEM-30547

This Sanyo MSE Mistral 2000R Refrigerated Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit has been tested and is in working order. The RPM could be set up to 6500 but the rotor would only run up to 4500rpm.

It was tested with a digital thermometer (not included).

When the temperature was set to 4˚c, the thermometer read 5˚c

When the temperature was set to -4˚c (minimum) the thermometer read -5˚c

There is a Rotor inside with 4 x Buckets and 2 x Yellow 50ml Adaptors.

It is in reasonably good cosmetic condition but has some minor marks from use.

£ 535.00 (ex. VAT) 1 in stock

MSE Sanyo HAWK 15/05 Refrigerated Benchtop Centrifuge MSB005.CR1.K Lab

ITEM-30375

This MSE Sanyo HAWK 15/05 Refrigerated Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order up to 15000rpm. The refrigeration works well.

It is in good cosmetic condition with minor marks from use.

The rotor has 25x2ml Buckets

£ 505.00 (ex. VAT) 1 in stock

Thermo Heraeus Pico 17 Centrifuge & 75003424 Fixed Angle Rotor Lab

ITEM-36075

This Thermo Heraeus Pico 17 Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order up to the max of 13000rpm. It is in good cosmetic condition with minor marks from use.

Thermo Heraus Pico 17 Centrifuge

Model#: Pico 17

Serial#: 40638289

Manf: 2006

Thermo 75003424 Fixed Angle Rotor

Model#: 75003424

Holds 24 x 1.5/2ml Tubes.

Max 14800rpm

It also comes with the original Allen key used to tighten the Rotor.

£ 500.00 (ex. VAT) 1 in stock

Jouan B4i Bench-Top Lab Centrifuge 14000rpm + Tube Rotor Lab

ITEM-11932

This unit was removed from a lab as surplus to requirements.

At our site, we tested it and it ran up to 14,000 rpm smoothly.

We have not tested the unit any further.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan MR22i Refrigerated Centrifuge with SWM180.5 Rotor Lab Spares/Repairs

ITEM-24229

Jouan M22i refrigerated centrifuge with Jouan 5000rpm rotor

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, we are unable to test it further as there's an error with the door lock sensor that prevents any use.

Also, the screen visibility is poor, therefore it is listed as Spares/Repair.

Includes:

Jouan four bucket rotor SWM180.5

Max 5000 rpm

Load charge 2.000kg

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Kendro Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor Lab Spares/Repair

ITEM-26006

Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up but shows error 21 - wiring fault.

It is sold for spares/repairs.

A 4600rpm rotor is included.

£ 500.00 (ex. VAT) 1 in stock

Sigma 2-16P Centrifuge with Nr.12148 15300/min Rotor Lab

ITEM-28148

This Sigma 2-16P Centrifuge with Nr.12148 15300/min Rotor was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It does begin to whistle above 10000rpm, but we believe this is just down to the lid seal.

It has had new lid struts fitted and new QR lid release plugs.

With it is a Sigma Nr.12148 15300/min Centrifuge Rotor.

Good used condition.

Measures:

Approx 17cm.

Centre bore: 10.8mm.

Tube holes: 10.8 x 36.2mm.

24 sample holes.

£ 500.00 (ex. VAT) 1 in stock

Jouan B4i Benchtop Centrifuge with S40 Rotor Lab

ITEM-29821

This Jouan B4i Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

This item includes the following rotor:

Thermo Jouan High Throughput Swing-Out Rotor Model S40

Max Load 2.00kg

Max speed 4300 (rpm)

This item ran at 4000rpm with S40 Rotor fitted.

As stated in the manual, the maximum speed for a swing-out rotor on this unit is 4000 rpm.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Heraeus Biofuge 22R Centrifuge Lab Spares/Repairs

ITEM-35675

This Heraeus Biofuge 22R Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up but does not run. We removed the front panel to investigate and at least two relays are sparking quite badly.

It is in good cosmetic condition with marks from use.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan CR 412 Refrigerated Centrifuge Lab Spares/Repairs

ITEM-37144

Jouan CR 412 Centrifuge

This unit was removed from a university where it was surplus to requirement.

This item is in reasonably good cosmetic condition.

It powers on, but the button functions are unresponsive to the unit, therefore unable to conduct any testing.

The lid opened with manual emergency release.

It is sold as Spares/Repairs.

Includes the following:

2x Swinging Buckets:

Part no: 11174154

Volume: 450ml

Bucket Vial Adaptor Inserts:

1x set 7x 50ml vials - RED

1x set of 7x 15ml / 16x 6ml vials - BROWN

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

MSE Mistral 3000i Benchtop Centrifuge Lab Spares/Repairs

ITEM-37436

MSE Mistral 3000i Benchtop Centrifuge

This was removed from a university lab where it was surplus to requirements.

Although the unit is in good cosmetic condition and powers on, it is unable to run a cycle or reduce temperature.

Additionally included:

1 x MSE Rotor

Model BS4402

7 x Swinging Buckets:

Volume: 250ml

Bucket Adaptors:

6 x Blue

Holds: 12x 5ml Vials

7 x Grey

Holds: 4 x 12ml Vials

8 x MSE Brown

Holds: 1 x 100ml VIals

1 x Hex Key Locking Bar

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

MSE Mistral 3000I Centrifuge Lab Spares/Repairs

ITEM-37673

MSE Mistral 3000I Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has issues running. It initially ran, but then went into a 160rpm limp mode.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan BR 3.11 Refrigerated Centrifuge Lab Spares/Repairs

ITEM-39146

Jouan BR 3.11 Refrigerated Centrifuge Lab

This was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition and powers up.

Despite being in reasonably good cosmetic condition, this item is to be sold as Spares or Repairs due to its inability to maintain the set temperature and keep the lid open.

Included:

Jouan B 3.11 Centrifuge G=420 g, 4000 RPM Rotor & 11174179 Buckets

Beckman Coulter SW32Ti Swinging Bucket Rotor

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge Spares/Repairs

ITEM-39217

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge with Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up, but the display screen is faulty, therefore we were unable to test further.

It is in reasonably good cosmetic condition, with marks from use.

It is listed as Spares/Repairs.

Includes the following:

SIGMA 11133 Swinging Bucket Rotor w / 2 x Buckets

Bucket capacity: 4 x 550 ml

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf Refrigerated Centrifuge 5804 R Lab Spares/Repairs

ITEM-41484

Eppendorf Refrigerated Centrifuge 5804 R Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on, therefore we are unable to test it further, and it is listed as Spares/Repair.

The control board is faulty, and is loose inside the chamber.

There is no rotor.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan Refrigerated Centrifuge Model - CR412 with 4750RPM Rotor & Inserts Lab

ITEM-41652

Jouan Refrigerated Centrifuge Model - CR412 with 4750RPM Rotor & Inserts Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, when powered on the display reads '0000' and no controls are operable, thus preventing any testing from being conducted.

Therefore, this item is sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Heraeus Instruments Labofuge 400R Function Line Lab Spares/Repairs

ITEM-41702

Heraeus Instruments Labofuge 400R Function Line Lab

This item was removed from a university where it was surplus to requirement.

It is in fairly poor cosmetic condition and powers on, however, due to an issue with the cooling/heating element it did not reach any desired temperature when tested.

Therefore, it is listed as Spares/Repair.

Additionally, it was tested to its maximum speed of 4500RPM, which performed well with no issues.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman L8-80MW Ultracentrifuge Lab

ITEM-44394

Beckman L8-80 Ultracentrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition externally and powers on, however, when tested we attempted to run the unit with a 70Ti rotor (not included), but encountered cooling system and speed sensor errors.

Also, oil was discovered under the rotor and in the chamber/motor area, possibly due to a worn seal.

Due to the above faults, this item is listed as Spares/Repair.

The 3-phase plug has been removed and there is no rotor included in the sale.

Also included:

1 x Operation Key

1 x Original User Manual

£ 435.00 (ex. VAT) 1 in stock

Sigma 3 K 18 Refrigerated Laboratory Centrifuge Lab

ITEM-29721

This Sigma 3K18 Refrigerated Laboratory Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers on and is in working order. There is no rotor, but we tested it without on a low speed.

It is in reasonably good cosmetic condition with minor marks from use.

£ 430.00 (ex. VAT) No longer available

Du Pont Sorvall Benchtop Centrifuge Model - RT 6000D with H1000B 3600RPM Rotor

ITEM-25304

This Du Pont Sorvall Benchtop Centrifuge Model - RT 6000D with H1000B 3600RPM Rotor was removed from a university lab where it was surplus to requirements.

The item powers on with rotor speed running smoothly up to 3600rpm.

The temperature was first set to 4˚c which it reached quickly. The temperature was then set to its minimum setting of -20˚c. After an hour of running, the display read -14˚c but the thermometer was reading -20˚c.

The item is in a reasonable, used cosmetic condition with marks from use.

Rotor:-

Du Pont Instruments Sorvall H1000B

3600 Max RPM

4 x Sorvall Buckets (PN - 11053)

15 x Sorvall bucket adapters:-

1 x Green 00455 for 4 x 50ml tubes

2 x Green 00836 for 35 x 5ml tubes

2 x Black 00884 for 10 x 15ml tubes

2 x Purple 00847 for 20 x 12ml tubes

4 x Blue 00904 for 4 x 50ml tubes

4 x Yellow 00186 for 1 tube - diameter 63mm

£ 300.00 (ex. VAT) 1 in stock

Beckman Microfuge 22R Refrigerated Centrifuge with F241.5P 14000rpm Rotor Lab

ITEM-23948

This Beckman Microfuge 22R Refrigerated Centrifuge was removed from a university lab where it was surplus to requirements.

This unit came out of a working laboratory where it was in use until recently. The unit is in very good condition with very few marks.

We powered the unit on with no issues and it worked at 14000 rpm smoothly. The display screen is in very good condition with clear figures. There is a slight squeal when running. It has been fully temperature tested and is in working order.

The rotor is a F241.5P with 24x2 mL / 11x39 mm(24x2 mL / 0x2 in) tube apertures angled at 45 degrees. The plastic lid fits securely and has no damage.

£ 300.00 (ex. VAT) 1 in stock

Heraeus Biofuge 13 Centrifuge Lab

ITEM-37826

This Heraeus Biofuge 13 Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers on and runs smoothly up to 13,000rpm. It is in reasonably good cosmetic condition but is marked from use.

We are unable to test this item further at our facility.

18 sample holders.

£ 285.00 (ex. VAT) No longer available

Hermle Z 400 Benchtop Centrifuge with Rotor Lab

ITEM-37869

This Hermle Z 400 Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and runs up to 12500rpm.

It is in reasonable cosmetic condition with marks from use.

£ 280.00 (ex. VAT) 1 in stock

Fisher Scientific accuSpin Micro with 13000rpm Rotor Cat No. 75003245 Lab

ITEM-25990

This Fisher Scientific accuSpin Micro with 13000rpm Rotor was removed from a university lab where it was surplus to requirements.

The unit is in good used cosmetic condition but it does have various signs of general use.

The lid opens, the brake is working and all buttons appear to be responsive. The LCD screen is working and displays clearly.

The unit has been tested up to the max speed of 13,000rpm. It runs smoothly and as it should.

The rotor included is a;

Heraeus Rotor Model #3325B

•F 178953 PP 3/00

• Max Speed 13000 rpm

• Max load 24x4g

24x 2.0 tube flat cap holders

£ 250.00 (ex. VAT) 1 in stock

Sigma 4-15 Benchtop Centrifuge with Sigma Swing Bucket Rotor and Buckets Lab

ITEM-42158

Sigma 4-15 Benchtop Centrifuge with Sigma Swing Bucket Rotor and Buckets

This item was removed from a university lab where it was surplus to requirements.

The centrifuge and rotors are in good cosmetic condition and good working order.

Includes the following:

Sigma Centrifuge model: 4-15
Serial No.: 107405
Part No.: 10730
Year: 2004
Max speed: 13,500 rpm

Sigma Swing Bucket Rotor:
Model No.: 1150 19/D
Max speed: 5100 rpm
Max weight: 4 x 200g

Buckets:
4 x Sigma 13350 Swinging Buckets (277/D, 666g)

Tube Holders:
4 x Sigma 90147 Tube Holders (347g, 10 x 22mm tube positions)

£ 245.00 (ex. VAT) 1 in stock

Labnet Spectrafuge 24D Benchtop Laboratory Centrifuge with Rotor Lab

ITEM-36076

Labnet Spectrafuge 24D Benchtop Laboratory Centrifuge with Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order to 13,300rpm, but does whistle at higher speeds.

It is in good cosmetic condition with marks from use.

Model#: 24D

Cat#: C2400-T-230

Serial#: D 607625

The rotor holds 24 x 1.5/2ml tubes.

£ 230.00 (ex. VAT) 1 in stock

Thermo Electron Corporation Labofuge 300 Heraeus Centrifuge with Rotor Lab

ITEM-25267

This Thermo Electron Corporation Labofuge 300 Heraeus Centrifuge was removed from a university lab where it was surplus to requirements.

The item powers on and is in working order with the speed running up to 4000rpm.

The item is in a reasonable, used cosmetic condition.

It is fitted with a Fanem Rotor with 8 x 15ml Yellow buckets

£ 225.00 (ex. VAT) No longer available

Sorvall RT6000B Centrifuge w/3600 RPM Rotor - Sorvall H1000B Lab

ITEM-23286

This Sorvall RT 6000B Centrifuge w/3600 RPM Rotor - Sorvall H1000B was removed from a university lab where it was surplus to requirements.

The unit powers up and the rotor runs well up to 3600rpm.

The refrigeration was tested with a digital thermometer (not included).

We set the chamber temperature dial to 4°c and the thermometer dropped to 4.5°c.

We then set the temperature to the minimum of -20°c and it dropped quite quickly to -28°c.

It is in reasonably good cosmetic condition with some marks from use. the rotor has some rust on it

Included with it are;

1 x Rotor - Sorvall H1000B

3600 Max RPM

4 x Du Pont Swinging Buckets (PN - 11053)

2 x Yellow Sorvall Bucket Adapters (00846) 25mm hole diameter.

2 x Blue Sorvall Bucket Adapters (00830) for 50ml tubes.

2 x Black Sorvall Bucket Adapters (00884) for 15ml tubes.

£ 195.00 (ex. VAT) 1 in stock

Grant-Bio Combi-Spin PCV-2400 Centrifuge & Tubes Lab

ITEM-36134

Grant-Bio Combi-Spin PCV-2400 Centrifuge & Tubes

This was removed from a university lab where it was surplus to requirements

The unit was tested at 2800 rpm at 50 Hz, and 3500 rpm at 60 Hz. It ran at both speeds without an issue.

Itt comes with a choice of interchangeable rotors for different microtube sizes/combinations 0.5/0.2/1.5

It is in excellent cosmetic condition.

Item also includes:

2 x Protein LoBind Tube 0.5mL

100 Safe-Lock Tubes

Cat#: 022431064

DNA LoBind Tube 0.5mL

500 Safe-Lock Tubes

Cat#: 0030 108 400

DNA LoBind Tube 1.5mL

250 Safe-Lock Tubes

Cat#: 022431021

£ 175.00 (ex. VAT) No longer available

Hermle - Labortechnik Refrigerated Centrifuge Z 233 MK & 14000RPM Rotor Lab

ITEM-24517

This Hermle - Labortechnik Refrigerated Centrifuge Z 233 MK & 14000RPM Rotor was removed from a university lab where it was surplus to requirements.

The unit powers up and runs smoothly up to 14000rpm. It was tested with a digital thermometer (not included). The temperature was set to -10˚c which it dropped to after running for 14 minutes (The thermometer read -15˚c).

It is in reasonably good cosmetic condition with marks from use.

It comes fitted with;

Hermle Rotor

220.88 V04

44 x 2ml tube slots

14000rpm Max

£ 145.00 (ex. VAT) 1 in stock

Jouan A-14 Benchtop Laboratory Centrifuge Type: 11174542 with 14000rpm Rotor Lab

ITEM-20120

This Jouan A14 Benchtop Laboratory Centrifuge Type: 11174542 with 14000rpm Rotor was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but it has some light stains on the lid and side panels. The Interior and rotor are clean.

The rotor has 20 sample spaces, it accepts 2ml vials. It is rated at 14000rpm.

It powers up fine and has been tested at a few different speeds. The numbers don't necessarily match up with the RPM of the unit.

Set at 3, the centrifuge hit 5800 RPM.

Set to 9, the centrifuge hit 11500 RPM.

Set to max of 14000, the centrifuge hit 14200 RPM.

£ 145.00 (ex. VAT) 1 in stock

Heraeus Biofuge Pico Centrifuge with 3324 Rotor Lab

ITEM-25991

This Heraeus Biofuge Pico Centrifuge with 3324 Rotor was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. There are some light tape marks from general use. The lid opens, the brake works and all buttons appear to be responsive. The LCD screen is working and displays clearly.

The unit was tested at the max speed of 13000rpm and ran smoothly.

The unit has the following rotor fitted;

Heraeus Rotor #3324

•PP1/96

•Max Speed 13000rpm

• Max load 24x4g

•24x 2.0 flat cap tube holders.

No further testing done.

Centrifuges

Filters