Other Centrifuges
Items 1 to 20 of 157
£ 94.76 (ex. VAT) 1 in stock
MSE Micro Centaur Centrifuge Lab Laboratory Equipment Mini Benchtop
ITEM-06814
- Reasonable condition
- From a top UK University
- Tested and runs smoothly and quietly.
£ 60.92 (ex. VAT) 1 in stock
12x ALC Cat.R2010 Centrifuge Rotor Buckets 11172468, 11172461, Lab
ITEM-10944
This lot was removed from a university store room as surplus to requirements.
We have not tested the buckets so they must be safety inspected prior to use.
£ 182.25 (ex. VAT) 1 in stock
2x Faulty Sorvall EconoSpin Bench-top Centrifuge + Rotors Spares / Repairs
ITEM-04696
The 2 Centrifuges do power on but have problems with lid catches and do not spin.
One is missing a dial.
Both rotors have 4 swinging buckets and a Max RPM 4000
£ 169.22 (ex. VAT) 1 in stock
2x Laboratory Centrifuge Rotors With tubes and accessories
ITEM-10217
These rotors were removed from a lab during a clearout.
The rotors do not have any details on them.
They have not been tested.
£ 67.69 (ex. VAT) 1 in stock
2x Sorvall 11053 Centrifuge Rotor Buckets With Inserts
ITEM-10522
2x Sorvall 11053 with Insert
2x Sorvall Other Buckets with insert
These were removed from a lab during a clearout. They have not been tested.
£ 84.61 (ex. VAT) 1 in stock
2x Thermo Scientific mySPIN 12 Mini Centrifuge Spares Repairs
ITEM-08435
Both of these units were removed from a lab during a clearout.
Neither unit powers up and so both are sold as spares / repairs.
This listing is for both units.
£ 142.50 (ex. VAT) 1 in stock
36x Centrifuge Buckets/Tubes Holder Lab
ITEM-12729
This lot was removed from a lab store during a clearout.
The buckets have not been tested so must be safety inspected prior to use.
16 Red units 19 x 19mm holders. Each unit is 41mm high. 10cm across
4 Green Units 27 x 15mm holders. 40mm high 10cm across
6 Black bases 7mm thick and 10cm across.
10 Metal holders- 13cm long and 10cm wide.
£ 213.75 (ex. VAT) 1 in stock
4x Eppendorf Lab Centrifuge Microplate Rotor Buckets for A-4-62
ITEM-12727
These buckets fit the Eppendorf A-4-62 rotor.
4 x buckets included as shown.
The buckets have not been tested.
£ 220.88 (ex. VAT) 1 in stock
4x Eppendorf Centrifuge Microplate Rotor Buckets for A-4-62 Lab
ITEM-12726
These buckets fit the Eppendorf A-4-62 rotor.
4 x buckets included as shown.
The buckets have not been tested.
£ 91.12 (ex. VAT) 1 in stock
ALC 4202 Micro Benchtop Centrifuge Lab Spares / Repair
ITEM-10885
This unit was removed from a lab during a clearout.
The unit does power on, but our team were unable to get it to run / spin therefore it is sold as spares / repair.
£ 135.38 (ex. VAT) 1 in stock
ALC A-M10 Lab Centrifuge Rotor 35mm Buckets, 10000RPM 11210200
ITEM-09567
This rotor was removed from a lab during a clearout.
We have not tested the rotor - so it must be safety inspected prior to use.
£ 182.25 (ex. VAT) 1 in stock
ALC PK 121R Centrifuge Refrigerated Benchtop Centrifuge Lab
ITEM-07330
This unit was removed from a lab as surplus to requirements.
At our site we tested it to around 2000rpm then the error E02 popped up - we do not know if this means the unit faulty, or if its because there was no rotor.
There is no rotor included.
£ 592.31 (ex. VAT) 1 in stock
ALC PK121R Refrigerated Benchtop Centrifuge With Rotor
ITEM-09597
This unit was removed from a lab as surplus to requirements. It was tested to 4100rpm (max of rotor) and 4degrees with no problems.
£ 676.87 (ex. VAT) 1 in stock
Align Arrows / Beckman Coulter JS-131 6 Tube Centrifuge Rotor Lab
ITEM-09953
This unit was removed from a university lab as its age was beyond the recommended serviceable life.
We have not tested the rotor, and due to its age it should be safety inspected by a competent individual prior to use.
£ 514.43 (ex. VAT) 1 in stock
Anatune CF-100 Benchtop Laboratory Centrifuge Vortex Robotic
ITEM-09291
This unit was removed from a lab and from brief testing appears to be in working order. However we have not been able to test the system fully.
£ 337.50 (ex. VAT) 1 in stock
Beckman Coulter Allegra 25R Benchtop Centrifuge Refrigerated
ITEM-06386
This Beckman Centrifuge came out of lab as surplus to requirements.
We tested it without any rotor fitted and it appeared to run smoothly up to 3000rpm. However we did not test it with a rotor (no rotor included).
When closed the lid seems to seal tight and lid mechanism is working well.
Refrigeration clearly runs, but we put in our temp probe and it reached -24 when dial was only reading -1. So the compressor might be overcooling, or it might just be the position we inserted the probe versus where the units built in thermostat is located.
£ 504.27 (ex. VAT) 1 in stock
Beckman Coulter Centrifuge Rotor Type 70.1 Ti Fixed-Angle Titanium
ITEM-09802
This unit was removed from a lab as surplus to requirements.
We were assured the unit is working, but it may now be beyond its service date so should be inspected by a competent professional prior to use.
£ 236.91 (ex. VAT) 1 in stock
Beckman Coulter J-Lite JLA-10.500 Fixed Angle Centrifuge Rotor - Damaged
ITEM-07123
This unit was removed from a lab during a clearout.
Unfortunately the unit has some damage /bending so is sold as spares / repairs only.
It will need to be repaired and safety inspected prior to use. Possibly it will only ever be useable at low speeds or may not be useable at all.
Please see photos.
£ 1,861.41 (ex. VAT) 1 in stock
Beckman Coulter J-LITE JLA-16.250 Fixed-Angle Centrifuge Rotor
ITEM-09800
This rotor was removed from a university lab as it had expired beyond the service life suggested by Beckman.
We have not tested the unit at our site.
Prior to use it must be inspected by a competent engineer to ensure it is safe for use.
£ 463.12 (ex. VAT) 1 in stock
Beckman Coulter JA-20 20000rpm Fixed-Angle Aluminum Centrifuge Rotor Lab
ITEM-13381
This centrifuge rotor was removed from a lab store room during a clearout.
We have not tested the rotor so it must be safety inspected prior to use.
It may be 'expired' or past manufacturer recommended use date.
Items 1 to 20 of 157