Engineering and Workshop
Items 51 to 69 of 69
£ 350.00 (ex. VAT) 1 in stock
Buehler LTD Minimet Polisher 69-1000-250 Lab
ITEM-44627
Buehler LTD Minimet Polisher 69-1000-250 Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 305.00 (ex. VAT) 1 in stock
Brook Hansen Motor with Gearbox Type - 100
ITEM-27558
This Brook Hansen Motor with Gearbox Type - 100 was removed from a university lab where it was surplus to requirements.
The item is in a reasonable, used cosmetic condition but has not been tested. It requires a 3-phase plug to be fitted.
There is no on/off switch so we decided it wasn't safe to power up.
£ 300.00 (ex. VAT) 1 in stock
P&J Dust Extraction Wood Extractor
ITEM-56887
P&J Dust Extraction Wood Extractor
This P&J Dust Extraction Wood Extractor was removed from a facility where it had become surplus to requirements.
The unit is in good working order.
Please note: The extractor was originally hardwired into the facility and will therefore require suitable electrical recommissioning and installation by a competent person before use.
£ 250.00 (ex. VAT) 1 in stock
Gabro 4M2 Manual Guillotine and Notcher Engineering
ITEM-44951
Gabro Manual Guillotine and Notcher
This item was removed from a university where it was surplus to requirements.
The unit is in reasonably good cosmetic condition, showing various signs of wear and use. It is missing some bolts.
Specifications:
- Dimensions: L136 x W130 x H222 cm
£ 250.00 (ex. VAT) 1 in stock
Echtop 1.123TECAB35-IE2 Centrifugal Fan Pump System Lab
ITEM-49806
Echtop 1.123TECAB35-IE2 Centrifugal Fan Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
It is fitted with a 32amp 5 pin plug.
£ 250.00 (ex. VAT) 1 in stock
Job Lot of Metal Polishing & Grinding Plates: Buehler Metlap, Struers, D.P. Disc
ITEM-56751
Job Lot of Metal Polishing & Grinding Plates – Buehler Metlap, Struers and D.P. Disc
This lot was removed from a facility where it was surplus to requirements.
Includes various sizes and brands, including Buehler Metlap, interchangeable D.P. Discs and Struers MD-Mol plates.
Approximate diameters: 20 cm, 23 cm, 24 cm and 30 cm.
Please refer to the photographs for the quantity, condition and exact items included. Some items are shown with a tape measure for size reference.
£ POA 1 in stock
Elnor Alcatel Pump
ITEM-58088
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Instron 5565 Universal Testing Machine with thermal chamber (Model 3111)
ITEM-57179
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Gillard Servo-Torq Cutter ST-M/30A02000AS
ITEM-58287
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
High-Performance Automotive Lola Wind Tunnel w/ 1,200m² Facility Upgraded 2024
ITEM-49526
High-Performance Automotive Lola Wind Tunnel w/ 1,200m² Facility Upgraded 2024
This system is sold on behalf of a Client. It is surplus to requirement.
The facility was commissioned in 1999 by Lola Cars to deliver advanced aerodynamic testing for race and road cars. It has an extensive history of use by leading motorsport and automotive brands including Mazda, Toyota F1, Aston Martin, Bentley, MG (Le Mans Car) and Scania Trucks. Typical rental rates for external users have been around £7,000 per day.
A major upgrade project was completed between late 2023 and mid-2024, bringing the wind tunnel to the very latest standards of aerodynamic testing. The upgrade preserved the tunnel’s proven aerodynamic performance while introducing the latest control systems, data handling capabilities, and automation features.
Key upgrade highlights include:
- New EtherCat-enabled control architecture for all major systems
- Cosworth Diablo control software providing automated sequencing, Constant Motion Testing, advanced data acquisition, and integration with MATLAB and Pi Toolbox
- Rolling Road and Boundary Layer Suction System fully upgraded for precision airflow control
- Enhanced Model Motion System (MMS) with improved speed, power, and positional accuracy for realistic simulation of track and road conditions
- Turntable synchronisation with MMS for accurate cornering simulations
- Upgraded pressure scanning system with 384 high-speed, high-resolution channels
- Aerotech overhead balance integrated with EtherCat for improved force measurement precision
- Split high-speed network infrastructure for secure facility control and data handling
The wind tunnel is available for purchase with or without its 1,200 m² purpose-built building:
- £2.153 million – wind tunnel only
- £2.563M million – wind tunnel with building
It has been used very lightly over the past three years and is ready for continued use in motorsport, automotive R&D, and advanced aerodynamic applications.
This item is located in Huntingdon, UK.
Further information, including detailed technical specifications, upgrade documentation, and photographs, is available on request.
The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.
£ POA 1 in stock
British Federal 17kva Spot Welder
ITEM-54308
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
AJA Sandfacer Belt Sanding Machine Belt Size 915 x 100 0.75HP
ITEM-56763
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Wadkin Durham CP32 Panel Saw
ITEM-48755
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Wirtz Buehler Beta Grinder-Polisher Type 4951022300
ITEM-56334
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Myford Super 7 Spinning Lathe w/ Misc Accessories inc. 2 Chucks & 3 Drill Chucks
ITEM-56821
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Myford Super 7 Spinning Lathe
ITEM-56823
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Hitachi GT 21 Grinder
ITEM-56898
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Axminster M-360 102425 Pillar Drill
ITEM-56830
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Axminster M-360 102425 Pillar Drill
ITEM-56829
This item is new in stock. Please enquire for further details.
Items 51 to 69 of 69