Engineering
Items 201 to 228 of 228
£ POA 1 in stock
Jun-Air OF302-25 Air Compressor
ITEM-51279
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
High-Performance Automotive Lola Wind Tunnel w/ 1,200m² Facility Upgraded 2024
ITEM-49526
High-Performance Automotive Lola Wind Tunnel w/ 1,200m² Facility Upgraded 2024
This system is sold on behalf of a Client. It is surplus to requirement.
The facility was commissioned in 1999 by Lola Cars to deliver advanced aerodynamic testing for race and road cars. It has an extensive history of use by leading motorsport and automotive brands including Mazda, Toyota F1, Aston Martin, Bentley, MG (Le Mans Car) and Scania Trucks. Typical rental rates for external users have been around £7,000 per day.
A major upgrade project was completed between late 2023 and mid-2024, bringing the wind tunnel to the very latest standards of aerodynamic testing. The upgrade preserved the tunnel’s proven aerodynamic performance while introducing the latest control systems, data handling capabilities, and automation features.
Key upgrade highlights include:
- New EtherCat-enabled control architecture for all major systems
- Cosworth Diablo control software providing automated sequencing, Constant Motion Testing, advanced data acquisition, and integration with MATLAB and Pi Toolbox
- Rolling Road and Boundary Layer Suction System fully upgraded for precision airflow control
- Enhanced Model Motion System (MMS) with improved speed, power, and positional accuracy for realistic simulation of track and road conditions
- Turntable synchronisation with MMS for accurate cornering simulations
- Upgraded pressure scanning system with 384 high-speed, high-resolution channels
- Aerotech overhead balance integrated with EtherCat for improved force measurement precision
- Split high-speed network infrastructure for secure facility control and data handling
The wind tunnel is available for purchase with or without its 1,200 m² purpose-built building:
- £2.153 million – wind tunnel only
- £2.563M million – wind tunnel with building
It has been used very lightly over the past three years and is ready for continued use in motorsport, automotive R&D, and advanced aerodynamic applications.
This item is located in Huntingdon, UK.
Further information, including detailed technical specifications, upgrade documentation, and photographs, is available on request.
The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.
£ POA 1 in stock
Selecta 6" Bench Grinder
ITEM-50919
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Eiger Torrance LTD M250 VSF TFV 'Mini" Motormill 250 Bead Mill
ITEM-49980
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Inoxpa Pharmix 75L Sterile Stainless Steel Skid Mounted Mixing Spares/Repair Lab
ITEM-46912
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Jun-Air Model 3 Air Compressor Spares/Repair
ITEM-50199
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Opperman Revmaster RMD 307TDM10 Positive Displacement Pump
ITEM-50646
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
JP Pumps Positive Displacement Pump
ITEM-50645
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Jun-Air Model 3 Air Compressor
ITEM-50200
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Meddings Pillar Drill Type S32ME
ITEM-51387
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Agilent 6654A System DC Power Supply
ITEM-53874
Agilent 6654A System DC Power Supply
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ POA 1 in stock
Agilent Infiniium 54825A Oscilloscope 500 MHz 2 GSa/s
ITEM-53852
Agilent Infiniium 54825A Oscilloscope – 500 MHz, 2 GSa/s
This item was removed from a facility where it was surplus to requirements.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Accessories are provided in the attached zip pouch, including a keyboard, probes, and additional accessories, along with some booklets and a metal stand.
Please note that the unit is missing two of its feet, with only two present. One of the remaining feet has a broken catch, although it still holds in place and functions.
£ POA 1 in stock
LeCroy LC574AM 1 GHz Oscilloscope
ITEM-53849
LeCroy LC574AM 1 GHz Oscilloscope
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ POA 1 in stock
Agilent E4426B ESG-AP Series Signal Generator
ITEM-53835
Agilent E4426B ESG-AP Series Signal Generator
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Please note: It is missing one of its legs.
- Firmware revision: B.03.51
- Firmware date: September 11 2000
- Total hours on: 25487.6
- Total hours display has been on: 25487.6
- Total power cycles: 246
- Attenuator cycles: 15955
- Reverse power protection trips: 3
£ POA 1 in stock
Agilent E4437B ESG-AP Series Signal Generator
ITEM-53834
Agilent E4437B ESG-AP Series Signal Generator
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
- Firmware revision: B.03.60
- Firmware date: November 17 2000
- Total hours on: 37346.8
- Total hours display has been on: 37346.8
- Total power cycles: 298
- Attenuator cycles: 10893
£ POA 1 in stock
Tektronix TDS 520C Two Channel Digitizing Oscilloscope with InstaVu Acquisition
ITEM-53851
Tektronix TDS 520C Two Channel Digitizing Oscilloscope with InstaVu Acquisition
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Please note: It is missing a foot.
£ POA 1 in stock
Hewlett Packard 8664A Synthesized Signal Generator
ITEM-53843
Hewlett Packard 8664A Synthesized Signal Generator
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ POA 1 in stock
Hewlett Packard 3325B Synthesizer/Function Generator
ITEM-53848
Hewlett Packard 3325B Synthesizer/Function Generator
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ POA 1 in stock
Hewlett Packard 54520A Oscilloscope
ITEM-53850
Hewlett Packard 54520A Oscilloscope
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ POA 1 in stock
Polar 850A Toneohm Shorts Locator 230VAC
ITEM-53866
Polar 850A Toneohm Shorts Locator 230VAC
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on.
£ POA 1 in stock
Rohde & Schwartz OSP 120 Open Switch and Control Unit
ITEM-53867
Rohde & Schwartz OSP 120 Open Switch and Control Unit
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on.
£ POA 1 in stock
Heidolph RZR 2051 Overhead Stirrer
ITEM-53915
Heidolph RZR 2051 Overhead Stirrer
This item was removed from a facility where it was surplus to requirement.
It is in working order.
£ POA 1 in stock
Electric Air Cooler Arctic-Plus
ITEM-54182
Electric Air Cooler Arctic-Plus
This item was removed from a facility where it was surplus to requirement.
It is in working order.
£ POA 1 in stock
Avery Impact Testing Machine Type - 6702
ITEM-52577
Avery Impact Testing Machine Type - 6702
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Includes;
- 2 x Boxes Hounsfield Tensometer Beams
£ POA 1 in stock
Hyundai HY30100V 100L Compressor Tank
ITEM-54177
Hyundai HY30100V 100L Compressor Tank
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and remains untested.
£ POA 1 in stock
Buehler Micromet 5104 Hardness Tester w/ 3 x Objectives M50,M10 & M20
ITEM-54245
Buehler Micromet 5104 Hardness Tester
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Objectives:
- M50 0.65/♾️ 810-619 Mitutoyo Japan 0805002
- M10 0.25/♾️ 810-617 Mitutoyo Japan 0801002
- M20 0.40/♾️ 810-618 Mitutoyo Japan 0802002
Accessories:
- Toolbox
- Sample Holder
- Controller
- OminMet Modular Imaging Solutions Version 9.9 Software
- Certificate of Calibration from BUEHLER Dated 12/09/2023
- Instruction Manual
£ POA 1 in stock
Alloy Products Corp Stainless Steel Vessel
ITEM-54193
Alloy Products Corp Stainless Steel Vessel
This item was removed from a facility where it was surplus to requirement.
It is untested.
£ POA 1 in stock
Alloy Products Corp Stainless Steel Vessel
ITEM-54194
Alloy Products Corp Stainless Steel Vessel
This item was removed from a facility where it was surplus to requirement.
It is untested.
Items 201 to 228 of 228