Engineering

£ 800.00 (ex. VAT) 1 in stock

Thermo Scientific VisionMate ST Single Tube Barcode Reader Lab

ITEM-46494

Thermo Scientific VisionMate ST Single Tube Barcode Reader Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes:

USB
User Manual

£ 800.00 (ex. VAT) 1 in stock

Trilogy Commander Digital Intercom TalkBack Double Main Frame

ITEM-46420

Trilogy Commander Digital Intercom TalkBack Double Main Frame

This item was removed from a facility where it was surplus to requirements.

The unit powers up as expected but has not been tested further.

Includes:

PREH Commander MultiMedia Keyboard

The unit is a PAT fail visually because of the missing blanking plates on the back.

£ 750.00 (ex. VAT) 1 in stock

Ametek PowerVar Sinergy III Model- ACDEF2000-22

ITEM-46464

Ametek PowerVar Sinergy III Model- ACDEF2000-22

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 750.00 (ex. VAT) 1 in stock

Ametek PowerVar Sinergy III Model ACDEF2000-22

ITEM-46465

Ametek PowerVar Sinergy III Model- ACDEF2000-22

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 750.00 (ex. VAT) 1 in stock

Jun-Air Compressor Model 12-40

ITEM-43051

Jun-Air Compressor Model 12-40

This item was removed from a facility where it was surplus to requirement.

It powers on and is in very good condition with minimal wear. The unit was only powered on briefly, as the oil had been expelled. Therefore, no further testing was carried out.

Specifications:

Pressure: 12.2 bar
Minimum Operating Temperature: 10°C
Maximum Operating Temperature: 50°C

£ 750.00 (ex. VAT) 1 in stock

Taylor Hobson Model K Pantograph Engraver 110.902.324

ITEM-48758

Taylor Hobson Model K Pantograph Engraver 110.902.324

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and appears to be in good working order.

There are various marks and signs of use.

£ 730.00 (ex. VAT) 1 in stock

WESCOR HR-33T Dew Point Microvoltmeter Lab

ITEM-52411

WESCOR HR-33T Dew Point Microvoltmeter Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

£ 710.00 (ex. VAT) 1 in stock

Adhere Hydraulic Mixer Model ECDQ2B32-100D Lab

ITEM-50447

Adhere Hydraulic Mixer ECDQ2B32-100D Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

The previous owner stated it was in working order prior to removal.

£ 705.00 (ex. VAT) 1 in stock

Jun-Air 4000-40M Cabinet Compressor Lab

ITEM-47757

Jun-Air 4000-40M Cabinet Compressor

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good condition with minimal wear.

The unit successfully powered on and produced airflow from the outlet valve at 2 Bar (25 PSI). Run hours recorded at 8424. Fitted with a 3-pin 16 Amp blue plug.

Includes:

Jun-Air motor Model 2000-US1 (Max 10 Bar, Motor ID L11798)

Model: 4000-40M

Serial No.: 644866

£ 700.00 (ex. VAT) 1 in stock

Betol Model 1307 Granualator Lab

ITEM-38029

Betol Model 1307 Granualator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Items details are as follows:

Model: 1307.

Serial No: A 5228.

Volts: 240.

Phase: 1.

Kw: 1.5.

£ 700.00 (ex. VAT) 1 in stock

Adhere Hydraulic Mixer ECDQ2B32-100D Lab

ITEM-50446

Adhere Hydraulic Mixer ECDQ2B32-100D Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

The previous owner stated it was in working order prior to removal.

£ 700.00 (ex. VAT) 1 in stock

Sairem Microwave Power Supply 2450 Mhz 300 W

ITEM-49055

Sairem Microwave Power Supply 2450 Mhz 300 W

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

Jun-Air Model 4000-40M Cabinet Compressor

ITEM-47758

Jun-Air 4000-40M Cabinet Compressor

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good condition with minimal wear. The unit successfully powered on and produced airflow from the outlet valve at 2 Bar (25 PSI). Run hours recorded at 8416.

Fitted with a 3-pin 16 Amp blue plug.

Model: 4000-40M

Serial No.: 644865

£ 700.00 (ex. VAT) 1 in stock

Denford Microrouter V5 Pro CAM CNC System with Software

ITEM-44931

Denford Microrouter V5 Pro

This system was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. The vacuum pump is functional. However, we are unable to conduct further testing at our facility.

Included:

Denford Update Disc
Denford Disc
Denford QuickCam Pro CAM Software
Denford VR CNC Milling Software
Denford CNC Projects Suite Milling
Denford QuickCam 4D Milling CAM Software
User's Manual
Denford CAD/CAM Design Challenge

£ 700.00 (ex. VAT) 1 in stock

ESEWAY Hardness Tester SPV2P Lab

ITEM-45098

ESEWAY Hardness Tester SPV2P

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

Pfeiffer TCP040 Power Supply Lab

ITEM-41313

Pfeiffer TCP040 Power Supply

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, it is untested as we are unable to test it further at our facility.

Run Time: 10797.0

£ 700.00 (ex. VAT) 1 in stock

Dräger Model X-am 5100 Gas Analyser Lab

ITEM-41866

Dräger X-am 5100 Gas Analyser Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

£ 700.00 (ex. VAT) 1 in stock

Dräger Type X-am 5100 Gas Analyser Lab

ITEM-41867

Dräger X-am 5100 Gas Analyser Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

£ 700.00 (ex. VAT) 1 in stock

Dräger X-am 5100 Gas Analyser Lab

ITEM-41865

Dräger X-am 5100 Gas Analyser Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

£ 700.00 (ex. VAT) 1 in stock

Dräger X-am Model 5100 Gas Analyser Lab

ITEM-41868

Dräger X-am 5100 Gas Analyser Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

£ 650.00 (ex. VAT) 1 in stock

STS STE03-DRV03 Drum Lifting Trolley

ITEM-46221

STS STE03-DRV03 Drum Lifting Trolley

This item was removed from a facility where it was surplus to requirements.

It appears to be in good cosmetic condition. Unable to test as it requires pressurised air.

£ 650.00 (ex. VAT) 1 in stock

Heidolph RZR 2041 Overhead Stirrer

ITEM-50699

Heidolph RZR 2041 Overhead Stirrer – Lab

This item was removed from a facility where it was surplus to requirements.

The stirrer is in reasonably good cosmetic condition and is in working order.

Please note: The RPM display is slightly faulty and there is some rust present.

£ 600.00 (ex. VAT) 1 in stock

TesaTronic TTD 30 Tesa-13 Comparator Unit

ITEM-51495

TesaTronic TTD 30 Tesa-13 Comparator Unit

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 600.00 (ex. VAT) 1 in stock

Bambi PT24 Oil Free Compressor

ITEM-47398

Bambi PT24 Oil Free Compressor

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The lab confirmed it was in good working order prior to removal.

£ 600.00 (ex. VAT) 1 in stock

STS Drum Lifting Trolley 60kg

ITEM-46226

STS Drum Lifting Trolley

This item was removed from a facility where it was surplus to requirements.

The STS Drum Lifting Trolley is in good cosmetic condition. It has not been powered on, as operation requires a compressor.

Therefore, it is untested.

£ 600.00 (ex. VAT) 1 in stock

LiftSafe 60KG Electric Work Positioner

ITEM-46223

LiftSafe 60KG Electric Work Positioner

This item was removed from a facility where it was surplus to requirements.

It is in fairly poor cosmetic condition but in good working order.

£ 600.00 (ex. VAT) 1 in stock

Buehler LTD Minimet Polisher 69-1000-250 Lab

ITEM-44627

Buehler LTD Minimet Polisher 69-1000-250 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 500.00 (ex. VAT) 1 in stock

Bei Chuan Machinery Co. Industrial Foam Chipper

ITEM-51303

Bei Chuan Machinery Co. Industrial Foam Chipper

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

£ 500.00 (ex. VAT) 1 in stock

Struers DP 10 Hand Polisher w/ 1x 0PSµm 3x 1µm 1x 6µm 1x 1/4µm 1x 3µm Discs

ITEM-51018

Struers DP 10 Hand Polisher w/ 1x 0PSµm 3x 1µm 1x 6µm 1x 1/4µm 1x 3µm Discs

This item was removed from a facility where it was surplus to requirement.

It is in working order.

Spare discs provided with different grain sizes.:

1x 0PSµm
3x 1µm
1x 6µm
1x 1/4µm
1x 3µm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Axminster AP6300HD3 Bandsaw (Model 700352) 3 Phase Spares/Repair

ITEM-48751

Axminster AP6300HD3 Bandsaw (Model 700352) – 3 Phase – Spares/Repair

This item was removed from a facility where it was surplus to requirements.

The unit is in good used cosmetic condition with typical signs of workshop use. The previous owner reported the machine as being for parts, and as such it has not been wired for power.

There are several cut cables and missing switch keys, preventing electrical testing. In addition, the saw appears to be missing parts from the band mechanism, although the exact missing components are unknown.

The machine is also supplied without the table.

Due to the issues described above and the inability to test the unit, it is being sold as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Jun-Air Model 3 Air Compressor

ITEM-50039

Jun-Air Model 3 Air Compressor Lab

This item was removed from a university laboratory where it was surplus to requirement.

The unit is in good cosmetic condition and powers on; however, we are unable to test it further at our facility.

Both pressure gauges function as they should.

A service is recommended prior to use.

£ 500.00 (ex. VAT) 1 in stock

Magnetron Sputter Banking Plate 10 inch

ITEM-47782

Magnetron Sputter Banking Plate 10 Inch

This item was removed from a facility where it was surplus to requirements.

The plate features both rubber O-rings, which are in good condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 6 x Lafert Type: ST63C4 Motors w/ Air Blowing Impellers Spares/Repair

ITEM-42462

Job Lot of 6 x Lafert Type: ST63C4 Motors w/ Air Blowing Impellers Spares/Repair

This job lot of items comes from a university laboratory. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs, as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

Included in the lot:

6 x Lafert Type: ST63C4 Motors with Air Blowing Impellers
Further Information from Data Plate:
IEC60038 3~Mot.
Th.Cl.F IP55.
50Hz: 230/400V 0.13kW 0.87/0.50A.
60Hz: 254/440V 0.15kW 0.87/0.50A.
1360/1630min-1 cos 0.64/0.64.
Protector Type PT0 150°C.
Individual Dimensions: L 53cm x W 25cm x H 25cm, 4.6Kg each.
Shaft Length: 30cm.
Fan Dimensions: 25cm x 25cm.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

INDENTEC Hardness Testing Machine 5030SKV Lab Spares/Repairs

ITEM-34831

INDENTEC Hardness Testing Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however it displays the following error: Check Lead which prevents further use.

It is listed as Spares/Repair.

Also included:

Calibration Certificate

User Manual

Optic Head

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Zimm Solar ZSA-62 Electromechanical Actuator Spares/Repair

ITEM-48683

Zimm Solar ZSA-62 Electromechanical Actuator Spares/Repair

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, unable to test due to the power supply not being included.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Cleghorn Waring Pumps CEKM70/3 Centrifugal Pump

ITEM-50643

Cleghorn Waring Pumps CEKM70/3 Centrifugal Pump

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

£ 450.00 (ex. VAT) 1 in stock

Magnetron Sputter Blanking Plate 7.5 inch

ITEM-47785

Magnetron Sputter Blanking Plate 7.5 inch

This item was removed from a facility where it was surplus to requirements.

The plate is in good condition with minimal wear. Its rubber O-ring is intact and in good condition.

£ 450.00 (ex. VAT) 1 in stock

Absolute OF-B90-25 Oil Free Compressor Lab

ITEM-49551

Absolute - OF-B90-25 Oil Free Compressor Lab

This item is sold on behalf of a client. It is surplus to requirements.

It is in good cosmetic condition and in good working order. The unit was purchased new in June 2022 and was serviced annually by Speck & Burke until decommissioning in 2023.

Model: OF-590 25 230 50/60

Serial No.: 1132598

This item is sold on behalf of a client and falls outside our normal terms and conditions. It is non-returnable and non-refundable.

£ 400.00 (ex. VAT) 1 in stock

Magnetron Sputter Blanking Plate Size - 7 inch

ITEM-47786

Magnetron Sputter Blanking Plate Size - 7 inch

This item was removed from a facility where it was surplus to requirement.

It is in good condition with minimal wear. The plate is missing both O-rings, which appear to have been one rubber and one copper type.

£ 400.00 (ex. VAT) 1 in stock

Magnetron Sputter Blanking Plate 7 inch

ITEM-47784

Magnetron Sputter Blanking Plate 7 Inch

This item was removed from a facility where it was surplus to requirements.

It is in good condition. The plate is missing both O-rings, which appear to have been one rubber and one copper type.

£ 400.00 (ex. VAT) 1 in stock

Magnetron Sputter Blanking Plate 7 inch

ITEM-47783

Magnetron Sputter Blanking Plate 7 Inch

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition, though both O-rings are missing, one appears to have been rubber and the other copper.

£ 400.00 (ex. VAT) 1 in stock

Unit Instruments UFC-1100A Mass Flow Controller

ITEM-47780

Unit Instruments UFC-1100A Mass Flow Controller

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition, we are unable to test it at our facility.

Specifications:

Model - UFC-1100A
S/N - 9703006102
Max PSI - 500
Range - 10 SCCM
Gas - O2

£ 400.00 (ex. VAT) 1 in stock

Lowara ITT Industries CEA 120/5-V Centrifugal Pump

ITEM-46783

Lowara ITT Industries CEA 120/5-V Centrifugal Pump

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in working order.

Includes;

Power controller - MEM Model 331VSEL

£ 400.00 (ex. VAT) 1 in stock

Mitsubishi Freqrol - A500 Inverter Lab

ITEM-31520

Mitsubishi Freqrol - A500 Inverter Lab

Model: FR-A520-3. 7K

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition.

We are unable to test this item as it requires a connection to a larger system.

£ 360.00 (ex. VAT) 1 in stock

Wallis Hivolt High Voltage Power Supply Model C104/1P Lab 100kV 0.10mA

ITEM-07322

Wallis Hivolt High Voltage Power Supply Model C104/1P - originated in a working Lab in a top UK University and came to us as part of a Lab clear out.

We couldn't find any specifications on the unit but had a buyer for the unit give it a test and found it is 0.10ma, 100,000v which was unsuitable for their needs.

We have not carried out any testing, including any safety testing on the unit so it must be inspected and safety tested by a competent electrician prior to use.

1 of the clips on the back of the unit is broken - please see photos.

£ 350.00 (ex. VAT) 1 in stock

Elmi Intelli-Mixer RM-2L Mixer

ITEM-50866

Elmi Intelli-Mixer RM-2L Laboratory Mixer

This item was removed from a facility where it was surplus to requirement.

It is in poor cosmetic condition, with light rust visible around the base and staining across the control section.

The unit requires a 12V, 1.33A centre-positive power supply to operate.

Please note: This power supply is not included. We used a compatible in-house power supply to test the unit.

The mixer has been tested using our power supply and is in working order.

£ 350.00 (ex. VAT) 1 in stock

Murex Transtig AC/DC 355 Square Wave Welder

ITEM-30285

Murex Transtig AC/DC 355 Square Wave Welder

This was removed from a university where it was surplus to requirements.

We were unable to test the unit as it requires 3 Pin 660 Volts/60 Amps, which we do not have at our facility.

It is sold as untested.

£ 350.00 (ex. VAT) 1 in stock

Morso DK 8900 Randers Manual Guillotine

ITEM-41148

Morso DK 8900 Randers Manual Guillotine

Model: DK 8900

This was removed from a university lab where it was surplus to requirements. It is mechanically sound.

It is in reasonably good cosmetic condition.

£ 350.00 (ex. VAT) 1 in stock

Prodrive Technologies Cooling Temperature Controller for TFS TEMs Lab

ITEM-48651

Prodrive Technologies Cooling Temperature Controller for TFS TEMs Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Part#: 6538-1402-2900

£ 350.00 (ex. VAT) 1 in stock

Mitutoyo 543-552A Dial Indicator 543 Digimatic 1 In/25.4mm w/ 215-407 Stand

ITEM-46593

Mitutoyo 543-552A Dial Indicator 543 Digimatic 1 In/25.4mm w/ 215-407 Stand

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The power supply is included.

Engineering

Filters