Benchtop Centrifuges
Items 51 to 60 of 60
£ 350.00 (ex. VAT) 1 in stock
Hettich EBA 30 Bench Centrifuge With Hettich 113 + 8 x 25g Tube Rotor Lab
ITEM-42760
Hettich EBA 30 Bench Centrifuge With Hettich 8 x 25g Tube Rotor
This item was removed from a university lab where it was surplus to requirement.
It is in very good cosmetic condition and in good working order.
Includes;
Hettich 1113 Rotor
- Serial No. 000762
- Max rpm 5000
- 8 x 25g Hettich 1122 tube holder buckets
£ 350.00 (ex. VAT) 1 in stock
Jouan CR4-22 Benchtop Refrigerated Centrifuge Spares/Repairs
ITEM-45102
Jouan CR4-22 Benchtop Refrigerated Centrifuge With Swinging Bucket Rotor
This item was removed from a university lab where it was surplus to requirements.
The centrifuge powers on and is in fair cosmetic condition. The rotor did not reach the maximum RPM of 4750, stalling at 4100 RPM.
It has been temperature tested. (Thermometer not included.)
Due to the inability of reaching its max RPM, this centrifuge is listed as Spares/Repair.
Includes:
- Jouan bucket rotor
- 4 x 85220020 buckets
- 4 x swinging plates
- 4 x bucket inserts for 50ml tubes
- 4 x bucket inserts for 25ml tubes
£ 305.00 (ex. VAT) 1 in stock
Glotech GLO GT416 Low-Speed Laboratory Centrifuge with GRS-S-50-4 Rotor Lab
ITEM-23307
This GLO GT416 Low-Speed Laboratory Centrifuge with GRS-S-50-4 Rotor was removed from a university lab where it was surplus to requirements.
The unit powers up and runs smoothly up to 4000rpm.
It is in reasonably good cosmetic condition with some marks from use.
Rotor - GRS-S-50-4
Max rpm 4k
Max rcf 2700xg
4 x GLB-10 Swinging buckets fits 15ml tubes
£ 300.00 (ex. VAT) 1 in stock
MSE Falcon 6/300 Centrifuge w/ MSE Swing Out Rotor Lab
ITEM-36610
MSE Falcon 6/300 Centrifuge
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on and runs well with he fitted rotor, though we are told it will not go higher than 3000, even with a higher rated rotor.
This item also includes the following:
1 x Mistral MSE Rotor - 43124
- Capacity: 4 x 750ml
- SN: 986766
- Max RPM: 2500
- (There are no rotor buckets included)
£ 300.00 (ex. VAT) 1 in stock
Heraeus Biofuge 13 Centrifuge Lab
ITEM-37826
This Heraeus Biofuge 13 Centrifuge was removed from a university lab where it was surplus to requirements.
The unit powers on and runs smoothly up to 13,000rpm. It is in reasonably good cosmetic condition but is marked from use.
We are unable to test this item further at our facility.
18 sample holders.
£ 270.00 (ex. VAT) 1 in stock
Eppendorf 5417C Benchtop Centrifuge with Aerosoltight GE 035 11/01 Rotor Lab
ITEM-30269
This Eppendorf 5417C Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.
The unit powers up and runs up to 20,800rpm but is a little loud at max speed.
It is in reasonably good cosmetic condition but has a small crack on the bottom left of the unit.
It is fitted with an Eppendorf Aerosoltight GE 035 11/01 Rotor which holds 30 x 2ml tubes
£ 250.00 (ex. VAT) 1 in stock
Sanyo MSE Harrier 18/80 Refrigerated Centrifuge with 6000rpm Rotor Lab
ITEM-30455
This Sanyo MSE Harrier 18/80 Refrigerated Centrifuge was removed from a university lab where it was surplus to requirements.
The unit powers up and is in reasonably good cosmetic condition with marks from use.
It is in full working order. The rotor spins up to 6000rpm and the refrigeration works and has been tested at 4˚C and -9˚C.
MSE Rotor 43124-141
Max RPM - 6000
4 x Buckets
4 x Yellow Adaptors hold 1 x 50ml tube each
£ 250.00 (ex. VAT) 1 in stock
Sanyo MSE Mistral 2000R Refrigerated Benchtop Centrifuge with 4500rpm Rotor Lab
ITEM-30547
This Sanyo MSE Mistral 2000R Refrigerated Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.
The unit has been tested and is in working order. The RPM could be set up to 6500 but the rotor would only run up to 4500rpm.
It was tested with a digital thermometer (not included).
When the temperature was set to 4˚c, the thermometer read 5˚c
When the temperature was set to -4˚c (minimum) the thermometer read -5˚c
There is a Rotor inside with 4 x Buckets and 2 x Yellow 50ml Adaptors.
It is in reasonably good cosmetic condition but has some minor marks from use.
£ 100.00 (ex. VAT) 1 in stock
Centurion Cell-Prep 4050 Benchtop Centrifuge Lab
ITEM-32099
Centurion Scientific Centrifuge 4050 Series Cell-Prep
This item was removed from a university laboratory where it was surplus to requirements.
The centrifuge is in reasonable cosmetic condition, with visible signs of wear and some rust.
It powers on without issue and has been tested to operate at 50 RPM, 100 RPM, and its top speed of 200 RPM.
Included Components:
- 12-bay centrifuge rotor
- 1x balance weight
Specifications.
- Model: 4050 Series Cell-Prep
- Serial No.: 98042157
£ POA 1 in stock
Eppendorf Benchtop Refrigerated Centrifuge 5430 R Lab Spares/Repairs
ITEM-47208
This item is new in stock. Please enquire for further details.
Items 51 to 60 of 60