Lab Incubators

£ 6,000.00 (ex. VAT) 1 in stock

Binder CB-S 170 CO2 Incubator Double Stack Lab

ITEM-39009

Binder CB-S 170 CO2 Incubator Double Stack Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

This unit has been professionally serviced and is in full working order.

The service report is available on request.

RECERTIFIED ITEM

£ 5,000.00 (ex. VAT) 1 in stock

Thermo Scientific Cytomat 24 C Lab

ITEM-40009

Thermo Scientific Cytomat 24 C Lab

This item was removed from a university where it was surplus to requirement.

The unit has been professionally serviced and is in full working order.

The service report is available on request.

This item also includes the following:

1 x Operating instructions

1 x Software Documentation

RECERTIFIED ITEM

£ 4,045.00 (ex. VAT) 1 in stock

Thermo Scientific 3311 Forma Steri-Cult Co2 Incubator Lab

ITEM-36471

This Thermo Scientific 3311 Forma Steri-Cult Co2 Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested extensively at 37˚C and 5% CO2 as well is 50% humidity. (Testing probes not included).

We calibrated it to our working temperature and testing equipment, but will likely need calibrating again upon installation.

It is in full working order.

It is in good cosmetic condition with minor marks from use.

RECERTIFIED ITEM

£ 3,500.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model MCO-170AICD-PE With Tray and Shelves Lab

ITEM-37997

PHCBI CO2 Incubator Model MCO-170AICD-PE With Tray and Shelves Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It has been professionally serviced, the report is available on request.

It is in excellent condition internally and externally.

This item features the following:

4 x shelves: 47 x 45

1 x Stainless Humidity Water Pan: 44 x 25 x 7cm

£ 3,500.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model - MCO-170AICD-PE Lab

ITEM-37998

PHCBI CO2 Incubator Model - MCO-170AICD-PE Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

Also includes the following:

1 x Shelf: 47 x 45 cm

RECERTIFIED ITEM

£ 3,500.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model MCO-170AICD-PE With Shelving And Tray Lab

ITEM-37999

PHCBI CO2 Incubator Model MCO-170AICD-PE With Shelving And Tray Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It has been professionally serviced, the report is available on request.

It is in very good cosmetic condition internally and externally.

This item includes the following:

2 x Shelves: 47 x 45 cm

RECERTIFIED ITEM

£ 3,500.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab

ITEM-38000

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It has been professionally serviced, the report is available on request.

It is in very good cosmetic condition internally and externally.

This item includes the following:

3 x Shelves: 47 x 45 cm

1 x Humidity Water Tray: 44 x 25 x 7 cm

RECERTIFIED ITEM

£ 3,500.00 (ex. VAT) 1 in stock

Panasonic MCO-170AICD-PE CO2 Incubator Lab

ITEM-39064

Panasonic MCO-170AICD-PE CO2 Incubator

These were removed from a university lab where they were surplus to requirements.

Both units power up and have been tested with a digital thermometer (not included). It is in full working order.

This unit has been professionally serviced and is in full working order.

The service report is available on request.

£ 3,250.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model MCO-170AIC-PE Lab

ITEM-41811

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in very good cosmetic condition internally and externally.

£ 3,000.00 (ex. VAT) 1 in stock

ESCO CelCulture CCL–050B-8 CO2 Laboratory Incubator Lab

ITEM-31295

ESCO CelCulture CCL–050B-8 CO2 Laboratory Incubator

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order.

It is in good cosmetic condition with minor marks.

RECERTIFIED ITEM

£ 3,000.00 (ex. VAT) 1 in stock

Thermo Scientific HERAcell 150i CO2 Incubator Double Stack Lab

ITEM-39008

Thermo Scientific HERAcell 150i CO2 Incubator Double Stack

This incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a thermometer(not included).

It is in good cosmetic condition.

This unit has been professionally serviced and is in full working order.

The service report is available on request.

£ 2,850.00 (ex. VAT) 1 in stock

Thermo Electron Forma Series II Water Jacketed CO2 Incubator 3141 Lab

ITEM-30453

This Thermo Electron Forma Series II Water Jacketed CO2 Incubator 3141 was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order.

It is in reasonably good cosmetic condition with some marks from use. It is missing two feet on the right-hand side, but we can replace these on sale.

2 Shelves - 47 x 47cm

RECERTIFIED ITEM

£ 2,800.00 (ex. VAT) 1 in stock

Thermo Cytomat 2 C-LIN Automated Incubator Lab

ITEM-36590

Thermo Cytomat 2 C-LIN Automated Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit has been professionally serviced and is in full working order.

The full-service report is available on request.

This item also includes the following:

14 x Cytomat P35 Microplate Racks.

1 x Microscan MS-3-Laser BAR Code Scanner

Type FIS-0003-0007G.

RECERTIFIED ITEM

£ 2,800.00 (ex. VAT) 1 in stock

Thermo Scientific Cytomat 2 C-LIN Automated CO2 Incubator Lab

ITEM-38063

Thermo Scientific Cytomat 2C-LIN Automated CO2 Incubator

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request.

It is in good cosmetic condition, with minor marks from use.

Also Included:

2 x plate racks with 21 shallow plate spaces each.

Length of CO2 hose

1 x instruction manual

1 x software documentation manual

1 x 2 C-LIN configuration CD

2 x keys for door lock

2 x keys for the power switch

£ 2,750.00 (ex. VAT) No longer available

PHCBI Cooled Incubator Type - MIR-154-PE Lab

ITEM-41810

PHCBI Cooled Incubator Type - MIR-154 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in very good cosmetic condition internally and externally.

This item requires a Passcode to operate which is available on request.

£ 2,750.00 (ex. VAT) 1 in stock

PHCBI Cooled Incubator MIR-154-PE Lab

ITEM-41809

PHCBI Cooled Incubator Type - MIR-154 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in very good cosmetic condition internally and externally.

This item requires a Passcode to operate which is available on request.

£ 2,750.00 (ex. VAT) 1 in stock

PHCBI Cooled Incubator Model Type MIR-154-PE Labs

ITEM-41808

PHCBI Cooled Incubator Model Type MIR-154 Labs

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition internally and externally.

This item requires a passcode to operate, which is available on request.

£ 2,750.00 (ex. VAT) 1 in stock

PHCBI Cooled Incubator Model MIR-154-PE Lab

ITEM-41807

PHCBI Cooled Incubator MIR-154 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition internally and externally.

£ POA 1 in stock

PHCBI MIR-254-PE Cooled Incubator Lab

ITEM-44664

This item is new in stock. Please enquire for further details.

£ 2,335.00 (ex. VAT) 1 in stock

Sanyo MCO-20AIC CO2 Laboratory Incubator Double Stack MCO-20AIC lab

ITEM-30524

This was removed from a university lab where it was surplus to requirements.

Both incubators power up and have been tested at 5% CO2 and 37&50˚C with a temperature and CO2 sensor (not included). They are both in working order.

The incubators are in good cosmetic condition with only minor marks from use.

Top:-

Model - MCO-20AIC

SN - 01212236

External Dimensions - D72 W77 H102cm

Internal Dimensions - D51 W61 H66cm

4 Shelves - 45 x 58cm

1 Tray - 40 x 29 x 5cm

Bottom:-

Model - MCO-20AIC

SN - 60305034

External Dimensions - D72 W77 H102cm

Internal Dimensions - D51 W61 H66cm

4 Shelves - 45 x 58cm

£ 2,315.00 (ex. VAT) 1 in stock

Sanyo Type MCO-20AIC CO2 Laboratory Incubator Double-Stack lab

ITEM-30525

This was removed from a university lab where it was surplus to requirements.

Both incubators power up and have been tested at 5% CO2 and 37&50˚C with a temperature and CO2 sensor (not included). They are both in working order.

The incubators are in good cosmetic condition with only minor marks from use.

Top:-

Model - MCO-20AIC

SN - 01212218

External Dimensions - D72 W77 H102cm

Internal Dimensions - D51 W61 H66cm

4 Shelves - 45 x 58cm

Bottom:-

Model - MCO-20AIC

SN - 01212221

External Dimensions - D72 W77 H102cm

Internal Dimensions - D51 W61 H66cm

4 Shelves - 45 x 58cm

£ 2,000.00 (ex. VAT) 1 in stock

Sanyo Laboratory Incubator Model - MIR-154 Lab

ITEM-19402

This Sanyo Laboratory Incubator Model - MIR-154 was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

Inside dimensions - L33 x W62 x H50cm

2 Shelves 60 x 31cm

Everything is in reasonably good cosmetic condition with marks from use.

£ 2,000.00 (ex. VAT) 1 in stock

Binder CO2 Laboratory Incubator CB 160 Lab

ITEM-39010

Binder CO2 Incubator CB 160 Lab

This item was removed from a university where it was surplus to requirement.

The system has been professionally serviced and is in full working order. A report is available on request.

Requires CO2 connection fitted.

It is in great cosmetic condition.

2 x Shelf (60x60cm)

RECERTIFIED ITEM

£ 1,860.00 (ex. VAT) 1 in stock

Binder Model CB 150 CO2 Laboratory Incubator Lab

ITEM-36088

This Binder CB150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The system has been professionally serviced and is in full working order. A full report is available on request.

It is in good cosmetic condition with minor marks.

The trolley it sits on is not included.

RECERTIFIED ITEM

£ 1,850.00 (ex. VAT) 1 in stock

Binder CO2 Laboratory Incubator Model CB 150 Lab

ITEM-36091

This Binder CB150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The system has been professionally serviced and is in full working order. A report is available on request.

It is in good cosmetic condition with minor marks.

It is supplied with a trolley

£ 1,750.00 (ex. VAT) 1 in stock

Glas-Col Unit Pulse Platform Incubator 107A DPMINC24CE Lab

ITEM-41237

Glas-Col Unit Pulse Platform Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included).

Ran at full RPM(1200) with no issue.

It is in good cosmetic condition internally and externally.

£ 1,705.00 (ex. VAT) 1 in stock

Sanyo MIR-553 Refrigerated Laboratory Incubator Lab

ITEM-20221

This Sanyo MIR 553 Refrigerated Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with only limited usage marks. It has 4 shelves and a key with it.

It powers up and has been tested with a digital thermometer (not included).

When set at the lowest temperature of -15ºC our thermometer read 0.8ºC (The unit's internal thermometer read -0.2ºC)

When set at 37.5ºC our thermometer read 38.2ºC

When set at 50ºC our thermometer read 50.6ºC

The lamp inside is in working order, but the exterior lamp doesn't seem to work. It may need a new lamp.

Interior dimensions:

D53cm x W65cm x H128cm

£ 1,650.00 (ex. VAT) 1 in stock

Binder CO2 Incubator Series CB CB 150 Lab

ITEM-29765

This Binder CO2 Incubator Series CB CB 150 was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order, but the screen flickers quite a bit. It is readable and usable.

It was tested with a temperature and CO2 sensor (not included).

Internal dimensions are: L44cm x W49cm x H60cm.

RECERTIFIED ITEM

£ 1,500.00 (ex. VAT) 1 in stock

Kendro HERAcell 240 CO2 Incubator Lab

ITEM-31145

This Kendro HERAcell 240 CO2 Incubator was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order. A report is available on request.

It is in good cosmetic condition with minor marks from use.

Internal dimensions - D56.5 W60 H68cm

6 Doors with 6 Shelves - 50 x 26cm

RECERTIFIED ITEM

£ 1,500.00 (ex. VAT) 1 in stock

Kendro Heraeus HERAcell 150 CO2 Laboratory Incubator Lab

ITEM-35703

This Heraeus HERAcell 150 CO2 Laboratory Incubator was removed from a university lab where ti was surplus to requirement.

The unit has been professionally serviced and is in good working order. A report is available on request.

It is in good cosmetic condition with minor marks.

£ 1,500.00 (ex. VAT) 1 in stock

Heraeus Heracell 150 Co2 Incubator Lab

ITEM-38196

Heraeus Heracell 150 Co2 Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition externally but the copper interior has tarnished.

£ 1,500.00 (ex. VAT) 1 in stock

Heraeus Heracell 150 Co2 Incubator Lab

ITEM-38197

Heraeus Heracell 150 Co2 Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition externally but the copper interior has tarnished.

£ POA 1 in stock

Thermo Scientific Heraeus Cytoperm 2 CO2 Incubator Lab

ITEM-35704

This item is new in stock. Please enquire for further details.

RECERTIFIED ITEM

£ 1,350.00 (ex. VAT) 1 in stock

Sanyo MCO-18AC CO2 Incubator Lab

ITEM-38888

Sanyo MCO-18AC CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

It is in good cosmetic condition.

This unit has been professionally serviced and is in full working order.

The service report is available on request.

£ 1,310.00 (ex. VAT) 1 in stock

Climacell CLC-B2V-M / CLC 111-TV Cooling Incubator Lab

ITEM-36470

Climacell CLC-B2V-M / CLC 111-TV Cooling Incubator

This was removed from a working lab where it was surplus to requirements.

The unit powers up and is in full working order. (Thermometer not included).

It is in good cosmetic condition with minor marks.

£ 1,300.00 (ex. VAT) 1 in stock

Jouan Water Jacketed Incubator Model IG150 Lab

ITEM-29770

This Jouan Water Jacketed Incubator Model IG150 was removed from a university lab where it was surplus to requirements.

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with both a temp and CO2 sensor (not included). It is in good working order but will require calibration upon installation.

It is in good cosmetic condition with minor marks.

Internal dimensions are: L41cm x W41cm x H60cm.

£ 1,270.00 (ex. VAT) 1 in stock

Jouan IGO150 CELLlife CO2 Laboratory Incubator Lab

ITEM-17203

This Jouan IGO150 CELLlife CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Temp and CO2 sensor not included). While it was working well with our equipment and in our testing room, it may require calibration to your equipment and lab environment upon installation.

It is in reasonably good cosmetic condition with some marks from use. The front right leg is bent, but is level.

Internal dimensions 48x58x48cm LWH

Image of New Brunswick Galaxy 170 S CO2 Laboratory Incubator Model - CO170S-230-1000 Lab

RECERTIFIED ITEM

£ 1,270.00 (ex. VAT) 1 in stock

New Brunswick Galaxy 170 S CO2 Laboratory Incubator Model - CO170S-230-1000 Lab

ITEM-19862

This New Brunswick Galaxy 170 S CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in good working order.

Internal dimensions - D45 W53 H69cm

4 Shelves 43 x 52cm

1 Tray - 35 x 33 x 4cm

It is in reasonably good cosmetic condition with some marks from use.

£ 1,250.00 (ex. VAT) 1 in stock

Sanyo Laboratory CO2 Incubator Stack Models - MCO-17AIC / MCO-17AI Lab

ITEM-24501

Sanyo Laboratory CO2 Incubator Stack Models - MCO-17AIC / MCO-17AI

These were removed from a university lab where they were surplus to requirements.

The units power up and are in good working order. They were tested with a digital thermometer (not included).

They are in good cosmetic condition with minor marks from use.

1x Sanyo CO2 Incubator:

Model - MCO-17AI

SN - 90705826

Inside dimensions - D51 W49 H66.5cm

3 Shelves 46 x 46cm

1 Tray 46.5 x 36.5 x 4cm

1x Sanyo CO2 Incubator:

Model - MCO-17AIC

SN - 10100758

Inside dimensions - D51 W49 H66.5cm

2 Shelves 46 x 46cm

1 Tray 41 x 31 x 5cm

RECERTIFIED ITEM

£ 1,250.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300 Lab

ITEM-37017

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order. A report is available on request.

It is in good cosmetic condition with minor marks.

2 Shelves - 52 x 48cm

£ 1,230.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator Double Stack MCO-17AI MCO-18AIC (UV) Lab

ITEM-32019

This Sanyo CO2 Incubator Double Stack MCO-17AI MCO-18AIC (UV)was removed from a university lab where it was surplus to requirements.

Both units have been tested with and CO2 and temperature sensor and are in good working order. They will require calibration upon installation.

They are in good cosmetic condition with minor marks from use.

Top:-

Model - MCO-17AI

SN - 60301691

External dimensions - L70 W63 H90cm

Internal dimensions - L50 W48 H66cm

3 Shelves - 45 x 45cm

Net Weight - 91kg

Bottom:-

Model - MCO-18AIC (UV)

SN - 31112791

External dimensions - L71 W64 H91cm

Internal dimensions - L51 W48 H66cm

3 Shelves - 45 x 45cm

Net Weight - 93kg

RECERTIFIED ITEM

£ 1,135.00 (ex. VAT) 1 in stock

Panasonic CO2 Laboratory Incubator Model - MCO-18AC-PE Lab

ITEM-19463

This Panasonic CO2 Laboratory Incubator Model - MCO-18AC-PE was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced. It is in good working order. It will require calibration on installation.

It is in good cosmetic condition and is clean inside.

Internal dimensions - L51 x W48 x H67cm

2 Shelves - 46 x 45cm

£ 1,110.00 (ex. VAT) 1 in stock

Binder KB 115 Lab Cooling Incubator Laboratory

ITEM-39708

Binder KB 115 Lab Cooling Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

It is in reasonably good cosmetic condition but has marks from age and use.

Includes 4 shelves.

£ 1,100.00 (ex. VAT) 1 in stock

Sanyo MCO-20AIC C02 Incubator Lab

ITEM-35304

Sanyo MCO-20AIC C02 Incubator

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer and CO2 sensor not included).

It is in good cosmetic condition internally and externally.

Internal dimensions are as follows:

L57cm x W45cm x H66cm.

Features:

2 x Shelves

£ 1,090.00 (ex. VAT) 1 in stock

Sanyo CO2 MCO-20AIC Laboratory Incubator Lab

ITEM-29761

This Sanyo CO2 MCO-20AIC Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit is in good working order but will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item is supplied with 3 shelves.

Internal dimensions are L58cm x W45cm x H66cm.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova CO-170 Lab Spares/Repairs

ITEM-40039

New Brunswick Scientific Innova CO-170 Lab

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in fairly poor cosmetic condition with some rust, it has been temperature-tested. (thermometer not included)

The unit developed a back-light fault in the screen during CO2 testing. It is sold as Spares/Repair.

£ 1,000.00 (ex. VAT) No longer available

Binder C150 CO2 Laboratory Incubator Lab

ITEM-23983

This Binder C150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with marks from use.

It is in good working order but will require calibration upon installation.

The internal dimensions are H 59cm x W 49cm D 49cm

There are 3 shelves with 6 fitting positions

RECERTIFIED ITEM

£ 975.00 (ex. VAT) 1 in stock

Revco Habitat CO2 Water Jacketed Incubator Model no. RCO3500TWBB Lab

ITEM-28101

This Revco Habitat CO2 Water Jacketed Incubator Model no. RCO3500TWBB was removed from a university lab where it was surplus to requirements.

The unit has been fully tested and recertified by a qualified service engineer. The report is available on request if you would like to see it.

The unit has a water jacket that will require a top-up on installation. The unit will require 8-10 hours to stabilise once installed.

It is in excellent cosmetic condition with some minor marks from use.

4 Shelves - 49.5 x 49.5cm

Internal dimensions - D52 W50 H55cm

£ 910.00 (ex. VAT) 1 in stock

Genlab Model SP/LCI/320/SS/DIG Lab Incubator

ITEM-38911

Genlab SP/LCI/320/SS/DIG Laboratory Incubator

This was removed from a working lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with minor marks

6 Baskets/Drawers - 51 x 50 x 15cm

£ 895.00 (ex. VAT) 1 in stock

Genlab SP/LCI/320/SS/DIG Laboratory Incubator Lab

ITEM-38909

Genlab SP/LCI/320/SS/DIG Laboratory Incubator

This was removed from a working lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with minor marks, including a dent in the back panel.

6 Shelves - 51 x 50cm

Lab Incubators

Filters