Lab Incubators

Image of Heto Cellhouse 170 HI Model 170-300 CO2 Laboratory Incubator Lab

RECERTIFIED ITEM

£ 750.00 (ex. VAT) 1 in stock

Heto Cellhouse 170 HI Model 170-300 CO2 Laboratory Incubator Lab

ITEM-19303

This Heto Cellhouse 170 HI Model 170-300 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit has been fully tested and recertified by a service engineer. We have a copy of the report available if needed. It is fully working but the O2 sensor is out of date (user replaceable).

2 Shelves - 52 x 49cm

It is in good cosmetic condition but has some minor marks from use

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Thermo Scientific HERAcell Vios 160i CO2 Incubator Spares/Repairs

ITEM-30452

This was removed from a university lab where it was surplus to requirements.

The unit trips the testing room electrics when switched on. Upon investigation, we think the fault may have to do with heating element.

It is sold for spares/repairs.

£ 745.00 (ex. VAT) 1 in stock

Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator Lab

ITEM-29757

This Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. It will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item has 4 shelves.

Internal dimensions are L49cm x W48cm x H66cm.

£ 745.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator Lab

ITEM-29766

This Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator was removed from a university lab where ti was surplus to requirements.

The unit powers up and is in good working order but will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item is supplied with 4 shelves.

Internal dimensions are L45cm x W45cm x H66cm.

£ 715.00 (ex. VAT) 1 in stock

LTE Scientific IP100-U Laboratory Incubator Lab

ITEM-36518

LTE Scientific IP100-U Laboratory Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in reasonably good cosmetic condition with minor marks. (Digital thermometer not included).

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Sanyo MIR-553 Incubator Lab Spares/Repairs

ITEM-36207

Sanyo MIR-553 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but the power relay is short circuited so it runs overtemp.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Thermo Scientific HERACELL 150i C02 Incubator Lab Spares/Repairs

ITEM-39995

This was removed form a university lab where it was surplus to requirements.

The unit powers up but the backlight in the screen has failed making it impossible to see the screen to set temps etc.

It is sold for spares/repairs.

£ 700.00 (ex. VAT) 1 in stock

Heraeus B-6200 Incubator Lab

ITEM-44854

Heraeus B-6200 Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition, with some damage present (as shown in slide).

£ 675.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus Lab

ITEM-29748

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus

This was removed from a university lab where it was surplus to requirements.

The unit powers up and both the incubation and CO2 function have been tested. It is in good working order (Temp & CO2 sensor not included).

It is in reasonable cosmetic condition but has seen some heavy use on the inside. It is purely cosmetic though.

£ 600.00 (ex. VAT) 1 in stock

Sanyo CO2 Laboratory Incubator MCO-17AIC IR Lab

ITEM-29769

This Sanyo CO2 Laboratory Incubator MCO-17AIC was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order, but will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use. The handle has come off, but this does not affect the operation of the unit.

Item is supplied with 4 shelves.

Internal dimensions are: L45cm x W45cm x H66cm.

SPARES/REPAIR ITEM

£ 600.00 (ex. VAT) 1 in stock

Sanyo MIR-253 Cooling Laboratory Incubator Lab

ITEM-39066

Sanyo MIR-253 Cooling Laboratory Incubator

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably poor cosmetic condition with noticeable damage.

Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

Image of RS Biotech Galaxy CO2 Incubator Model - 170 Lab

RECERTIFIED ITEM

£ 565.00 (ex. VAT) 1 in stock

RS Biotech Galaxy CO2 Incubator Model - 170 Lab

ITEM-20737

This RS Biotech Galaxy CO2 Incubator Model - 170 was removed from a university lab where it was surplus to requirements.

The unit was tested and recertified by a qualified service engineer. The full report is available on request. It is important to note that the outdoor door has dropped slightly and the hinge is worn. The outer door seal also has a split.

It was confirmed to be in full working order and it is in otherwise good cosmetic condition with some minor marks from use.

£ 555.00 (ex. VAT) 1 in stock

Genlab LCI/12V/DIG/SMC Laboratory Incubator Lab

ITEM-38914

Genlab Model LCI/12V/PDIG Lab Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer not included)

4 Shelves - 60 x 60cm

£ 550.00 (ex. VAT) 1 in stock

Genlab Prime PRI/150 Laboratory Incubator Lab

ITEM-38908

Genlab Prime PRI/150 Laboratory Incubator

This was removed from a working lab where it was surplus to requirements

The unit powers up and is in full working order. It is in good cosmetic condition with minor marks.

2 Shelves - 49 x 48cm

£ 550.00 (ex. VAT) 1 in stock

Genlab LCI/12V/DIG/SMC Lab Incubator

ITEM-38913

Genlab Model LCI/12V/PDIG Lab Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer not included)

3 Shelves - 60 x 60cm

£ 540.00 (ex. VAT) 1 in stock

Genlab Model LCI/12V/PDIG Lab Incubator

ITEM-38912

Genlab Model LCI/12V/PDIG Lab Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer not included)

7 Shelves - 61 x 61cm

£ 535.00 (ex. VAT) 1 in stock

LMS Counter-Top Laboratory Cooled Incubator Lab

ITEM-24792

This LMS Counter-Top Laboratory Cooled Incubator was removed from a university lab where it was surplus to requirements.

The unit powers on and has been tested with a digital thermometer (not included).

Set at 4ºC our thermometer read 4ºC

Set at -10ºC our thermometer read -4.8ºC

The unit had been running for a number of hours and settled at -4.8ºC

Set at 22ºC our thermometer read 22.9ºC

Set at 30ºC our thermometer read 30.9ºC

The unit is lockable however there is no key supplied with this unit. I recommend a replacement barrel and key.

Interior dimensions:

W45cm x H43cm x D28cm

£ 525.00 (ex. VAT) 1 in stock

Jouan EB170 Electron Sans Ther Laboratory Incubator Lab

ITEM-37023

Jouan EB170 Electron Sans Ther Laboratory Incubator

This was removed from a working lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in reasonably good cosmetic condition with marks from use.

2 Shelves - 47 x 47cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator Model - MCO-17AIC Lab Spares/Repairs

ITEM-20014

This was removed from a university lab where it was surplus to requirements.

The unit powers up but the CO2 functions do not work. This is caused by a power board fault.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Panasonic MIR-554-PE Cooled Incubator Lab Spares/Repairs

ITEM-20210

This Panasonic MIR-554-PE Cooled Incubator was removed from a university lab where it was surplus to requirements.

The unit powers and incubates well, but has a faulty cooling system.

It is in otherwise good cosmetic condition with minor marks.

It is sold for spares/repairs

Interior dimensions:

D52cm x W64cm x H127cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R CO2 Incubator Model - 170-300 Spares/Repairs

ITEM-25477

RS Biotech Galaxy R CO2 Incubator Model - 170-300

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has no screen. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 240i CO2 Incubator Lab Spares/Repairs

ITEM-31726

Thermo Scientific Heracell 240i CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit has no screen and required a new CO2 sensor prior to the screen being removed.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo C02 Incubator Model: MCO-19AIC (UV) Lab Spares/Repairs

ITEM-35338

Sanyo C02 Incubator Model: MCO-19AIC (UV) Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up, is in good cosmetic condition, and has been temperature tested (thermometer & CO2 probe not included).

When the CO2 was tested, the unit did not stabilize at 5% and instead rose to 8.2% - 8.4% during testing.

Therefore, it is listed as Spares/Repair.

Internal Dimensions: L 45cm x W 44cm x H 66cm.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-554 Incubator Lab Spares/Repairs

ITEM-36213

This was removed from a university lab where it was surplus to requirements.

The unit does not power up.

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CO2 Laboratory Incubator Model CB 150 Lab Spares/Repairs

ITEM-38060

This was removed from a university lab where it was surplus to requirements

The unit powers up and works but has a faulty CO2 sensor.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LEEC Touch 50 Culture Safe CO2 Incubator Lab Spares/Repairs

ITEM-38889

LEEC Touch 50 Culture Safe CO2 Incubator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CB 160 CO2 Laborator Incubator Lab

ITEM-39007

Binder ED23 Drying And Heating Laboratory Oven

This was removed from a university lab where it was surplus to requirements.

The item powers on but the displays "error" after a short whilethat prevents the item from being tested.

It is in very good cosmetic condition.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 Lab Spares/Repairs

ITEM-39052

This RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition but due to the control panel being removed, we are unable to perform any test. Therefore, it is being sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CO2 Incubator CB 150 Lab Spares/Repairs

ITEM-39061

Binder CO2 Incubator CB 150

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on. (Thermometer not included)

This item does not have a CO2 fitting attached, therefore we are unable to test the CO2 function. The fan chamber is also noisy.

Due to this lack of testing, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-153 Refrigerated Laboratory Incubator Lab Spares/Repairs

ITEM-39069

Sanyo MIR-153 Cooling Laboratory Incubator Lab

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably poor cosmetic condition with noticeable damage.

Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5810E CO2 Incubator Lab Spares/Repairs

ITEM-39095

Nuaire 5810E CO2 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 did not increase on testing, and the sample pump failed, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5800E C02 Incubator Lab Spares/Repairs

ITEM-39096

Nuaire 5800E C02 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

VWR Incu-Line Incubator Lab Spares/Repairs

ITEM-39196

This VWR Incu-Line Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and works, but the door mechanism is broken, and the door will not remain closed.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

VWR 1927 Reach-In Dry C02 Incubator Lab Spares/Repairs

ITEM-39202

VWR 1927 Reach-In Dry C02 Incubator

This was removed from a university lab where it was surplus to requirement.

The unit initially powered up and worked to 35˚C only, but now will not power up due to a faulty switch.

The top panel is missing.

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator MCO-17AIC Lab Spares/Repairs

ITEM-39947

Sanyo CO2 Incubator MCO-17AIC

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has an issue with CO2 leaking.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 Incubator Lab Spares/Repairs

ITEM-39999

Sanyo MCO-18AIC CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers up, it has been tested with a digital thermometer (not included).

The current CO2 Pump failed during testing and will require a new one to be fitted.

Therefore, it is listed as Spares/Repair.

Features 3 Shelves.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-20AIC CO2 Incubator Lab Spares/Repairs

ITEM-40000

Sanyo MCO-20AIC CO2

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers up, it has been tested with a digital thermometer (not included).

The current CO2 Pump failed during testing and will require a new one to be fitted.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-162 Gravity Convection Incubator Lab

ITEM-40980

Sanyo MIR-162 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

It is in good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CB 150 CO2 Incubator Lab Spares/Repairs

ITEM-40989

Binder CB 150 CO2 Incubator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

This item does not power on, therefore it is sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R+ Incubator Lab Spares/Repairs

ITEM-41566

RS Biotech Galaxy R+ Incubator Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included).

We were unable to set the temperature to the MAX due to it having a faulty display, therefore it is listed as Spares/Repair.

It is in reasonably good cosmetic condition, although the motor at the back of the incubator is producing a continuous buzzing sound and the screen is very dark, which may indicate a faulty backlight.

This item also includes the following:

9 x Metal containers with glass lids and bases.

£ 500.00 (ex. VAT) 1 in stock

LEEC Research CO2 Incubator Model GA2000 Lab

ITEM-41593

LEEC Research CO2 Incubator Model-GA2000

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition.

£ 500.00 (ex. VAT) 1 in stock

LEEC Compact Incubator Model K2N Lab

ITEM-41676

LEEC Compact Incubator Model-K2N Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition internally and externally.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300 Lab Spares/Repairs

ITEM-42049

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170 - 300 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, however, the top fan is the only part of the unit that functions. The screen does not turn on, the back fans are not powered, and there are no visible LEDs illuminated on the motherboard.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LMS 400NP Cooled Incubator Lab Spares/Repairs

ITEM-42191

LMS 400NP Cooled Incubator

This item was removed from a university where it was surplus to requirement.

The incubator is in excellent cosmetic condition and powers on.

However, the compressor did not start up during testing, so the unit is unable to reach its minimum temperature of -10°C.

Therefore, it is listed as Spares/Repair.

Specifications:

Serial No.: 12425/17PP
Capacity: 450 litres
Internal dimensions: 64 x 55 x 118 cm (l x w x h)
Temperature range: -10°C to 50°C
4 height adjustable shelves (56 x 60 cm)
Factory set auto defrost system

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific CO2 incubator BB15 Lab Spares/Repairs

ITEM-45101

Thermo Scientific Heraeus CO2 Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but the display screen does not activate, and an alarm sounds until the unit is turned off.

Therefore, it is listed as Spares/Repair.

The incubator is in excellent cosmetic condition.

Includes:

3 shelves (47 x 43 cm)
Manuals
Sample holders

Model: BB15

Serial No.: 40998054

Internal dimensions: D51 W47 H60 cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Kendro HERAcell 150 CO2 Incubator Lab Spares/Repairs

ITEM-39065

Kendro HERAcell 150 CO2 Incubator

This system was removed from a university lab where it was surplus to requirements.

The unit is in good working order and has been CO2 tested. It is in good cosmetic condition.

£ 460.00 (ex. VAT) 1 in stock

Sanyo MIR-262 Laboratory Incubator Lab

ITEM-34942

This Sanyo MIR-262 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

It is in good cosmetic condition with marks from use.

3 Shelves - 57 x 48cm

RECERTIFIED ITEM

£ 450.00 (ex. VAT) 1 in stock

Heraeus BB 16 Function Line CO2 Incubator Lab

ITEM-39055

Heraeus BB 16 Function Line CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The system has been professionally serviced and is in full working order. A report is available on request.

It is in good cosmetic condition with minor marks.

RECERTIFIED ITEM

£ 435.00 (ex. VAT) 1 in stock

RS Biotech Galaxy S+ CO2 Laboratory Incubator 170-200 Plus Lab

ITEM-35168

This RS Biotech Galaxy S+ CO2 Laboratory Incubator was removed from a university lab where ti was surplus to requirements.

The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It will require calibration upon installation.

It is in good cosmetic condition with minor marks from use.

3 Shelves - 52 x 42.5cm

£ 405.00 (ex. VAT) 1 in stock

Genlab LCI/9V/DIG Lab Incubator

ITEM-38915

Genlab LCI/9V/DIG Lab Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer not included).

It is in good cosmetic condition with minor marks.

6 Shelves 50 x 50cm

Lab Incubators

Filters