Items 41 to 60 of 142

Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 1,020.00 (ex. VAT) 1 in stock

Revco Habitat CO2 Water Jacketed Incubator Model no. RCO3500TWBB Lab

ITEM-28101

This Revco Habitat CO2 Water Jacketed Incubator Model no. RCO3500TWBB was removed from a university lab where it was surplus to requirements.


The unit has been fully tested and recertified by a qualified service engineer. The report is available on request if you would like to see it.


The unit has a water jacket that will require a top-up on installation. The unit will require 8-10 hours to stabilise once installed.


It is in excellent cosmetic condition with some minor marks from use.



4 Shelves - 49.5 x 49.5cm


Internal dimensions - D52 W50 H55cm

Image of item

£ 1,000.00 (ex. VAT) 1 in stock

Sanyo CO2 Laboratory Incubator Stack MCO-18AIC & MCO-20AIC Lab

ITEM-30501

This was removed from a university lab where it was surplus to requirements.


Both incubators power up and have been tested with a temperature and CO2 sensor at 37&50˚C and 5% CO2 (Not included). Both are in full working order.


The stack is in good cosmetic condition with some marks from use. THey are nice and clean inside.


Top:-

Model - MCO-18AIC

SN - 40506190

External Dimensions - D71 W64 H90cm

Internal Dimensions - D51 W48 H66cm

3 x Shelves - 45 x 45cm

1 Tray - 40 x 29 x 5cm


Bottom:-

Model - MCO-20AIC

SN - 70408610

External Dimensions - D72 W77 H102cm

Internal Dimensions - D51 W61 H66cm

3 Shelves - 45 x 58cm

1 Tray - 40 x 29 x 5cm



Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 1,000.00 (ex. VAT) 1 in stock

GS Biotech 14L CO2 Incubator Lab

ITEM-39686

GS Biotech 14L CO2 Incubator


This was removed from a university lab where it was surplus to requirements.


The unit has been professionally serviced and is in good working order. A full report is available on request.


It is in good cosmetic condition with minor marks.

Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Thermo Scientific Midi 40 3404 CO2 Benchtop Laboratory Incubator Lab

ITEM-35687

Thermo Scientific Midi 40 3404 CO2 Benchtop Laboratory Incubator


This was removed from a university lab where it was surplus to requirements.


The unit has been professionally serviced and is in good working order. A full report is available on request.


It is in good cosmetic condition with minor marks.



Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Sanyo MCO-5M O2/CO2 Benchtop Laboratory Incubator Lab

ITEM-36467

Sanyo MCO-5M O2/CO2 Benchtop Laboratory Incubator


This was removed from a university lab where it was surplus to requirements.


The unit has been professionally serviced and is in the CO2 and Incubation functions are in full working order. The O2 was not checked. A full report is available on request.


It is in good cosmetic condition with minor marks.



Image of item

£ 990.00 (ex. VAT) 1 in stock

Binder KB 115 Laboratory Cooling Incubator Lab

ITEM-36090

Binder KB115 Cooling Laboratory Incubator


This was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included). It is in full working order.


It is in good cosmetic condition with minor marks.


Model#: KB 115 E3.1

Serial#: 15-19528


Image of item

£ 985.00 (ex. VAT) 1 in stock

Binder KB 115 Cooling Laboratory Incubator Lab

ITEM-36089

Binder KB115 Cooling Laboratory Incubator


This was removed from a university lab where it was surplus to requirements.


The unit powers up and ha been tested with a digital thermometer (not included). It is in full working order.


It is in good cosmetic condition with minor marks.


Model#: KB 115 E3.1

Serial#: 11-00565


Image of item

£ 950.00 (ex. VAT) 1 in stock

Genlab Model SP/LCI/320/SS/DIG Lab Incubator

ITEM-38911

Genlab SP/LCI/320/SS/DIG Laboratory Incubator


This was removed from a working lab where it was surplus to requirements.


The unit powers up and is in full working order. It is in good cosmetic condition with minor marks


6 Baskets/Drawers - 51 x 50 x 15cm

Image of item

£ 940.00 (ex. VAT) 1 in stock

Genlab Laboratory Incubator - Model SP/LCI/320/SS/DIG Lab

ITEM-38910

Genlab SP/LCI/320/SS/DIG Laboratory Incubator


This was removed from a working lab where it was surplus to requirements.


The unit powers up and is in full working order. It is in good cosmetic condition with minor marks


6 Shelves - 51 x 50cm

Image of item

£ 930.00 (ex. VAT) 1 in stock

Genlab SP/LCI/320/SS/DIG Laboratory Incubator Lab

ITEM-38909

Genlab SP/LCI/320/SS/DIG Laboratory Incubator


This was removed from a working lab where it was surplus to requirements.


The unit powers up and is in full working order. It is in good cosmetic condition with minor marks, including a dent in the back panel.


6 Shelves - 51 x 50cm

Image of item

£ 900.00 (ex. VAT) 1 in stock

Binder BD53 Bench-Top Microbiological Laboratory Incubator Natural Convection

ITEM-35474

Binder BD53 Bench-Top Microbiological Laboratory Incubator Natural Convection


This was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included). It is in good working order, and is in good cosmetic condition with marks from use.


3 x Shelves 30cm x 40cm

Image of item

£ 900.00 (ex. VAT) 1 in stock

Sanyo CO2 MCO-20AIC Laboratory Incubator Lab

ITEM-29761

This Sanyo CO2 MCO-20AIC Laboratory Incubator was removed from a university lab where it was surplus to requirements.


The unit is in good working order but will need to be calibrated upon installation.


It is in good cosmetic condition with minor marks from use.


Item is supplied with 3 shelves.


Internal dimensions are L58cm x W45cm x H66cm.


Image of item

£ 860.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator Model - MCO-18AIC (UV) Lab

ITEM-27468

This Sanyo CO2 Incubator  Model - MCO-18AC was removed from a university lab where it was surplus to requirements.


The unit is in good working order but the UV lamp requires a replacement bulb. We can look at replacing this for you upon purchase.


The unit will need calibration on installation.


It is in good cosmetic condition with minor marks from use.


Internal dims - D51 W48 H65

4 Shelves - 45 x 45cm


Image of item

£ 815.00 (ex. VAT) 1 in stock

RUMED 3701 Cooled Laboratory Double Door Incubator Lab

ITEM-32036

This MED 3701 Cooled Laboratory Double Door Incubator was removed from a university lab where it was surplus to requirements.


The unit powers up and is in full working order. It was tested with a digital thermometer (not included).


It is in good cosmetic condition with minor marks from use.


Internal dimensions - L110 W70 H162cm

Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 790.00 (ex. VAT) 1 in stock

Heto Cellhouse 170 HI Model 170-300 CO2 Laboratory Incubator Lab

ITEM-19303

This Heto Cellhouse 170 HI Model 170-300 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.


The unit has been fully tested and recertified by a service engineer. We have a copy of the report available if needed. It is fully working but the O2 sensor is out of date (user replaceable).


2 Shelves - 52 x 49cm


It is in good cosmetic condition but has some minor marks from use

Image of item

£ 785.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator Lab

ITEM-29766

This Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator was removed from a university lab where ti was surplus to requirements.


The unit powers up and is in good working order but will need to be calibrated upon installation.


It is in good cosmetic condition with minor marks from use.


Item is supplied with 4 shelves.


Internal dimensions are L45cm x W45cm x H66cm.


Image of item

£ 785.00 (ex. VAT) 1 in stock

Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator Lab

ITEM-29757

This Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator was removed from a university lab where it was surplus to requirements.


The unit powers up and is in working order. It will need to be calibrated upon installation.


It is in good cosmetic condition with minor marks from use.


Item has 4 shelves.


Internal dimensions are L49cm x W48cm x H66cm.


Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 770.00 (ex. VAT) 1 in stock

Heraeus HeraCell 150 CO2 Laboratory Incubator Lab

ITEM-18316

This Heraeus HeraCell 150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.


The unit has been tested, inspected and recertified by a qualified service engineer. The report is available on request.


The unit is in good cosmetic condition with only minor marks from use. The rear access bung is missing but doesn't affect the function at all.


Included with it are a set of shelves and a stainless steel box.


Inner dimensions: 47.5cm L x 54cm W x 61cm H.

Shelf dimensions: 46.5cm L x 42cm W.

Box dimensions: 46cm L x 49.5cm W x 22cm H.

Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 760.00 (ex. VAT) 1 in stock

Sanyo CO2 Laboratory Incubator MCO-18AIC UV IR Lab

ITEM-30502

This Sanyo CO2 Laboratory Incubator MCO-18AIC was removed from a university lab where it was surplus to requirements.


The unit has been professionally serviced and is in full working order.


It is in good cosmetic condition with minor marks from use.


External Dimensions - D71 W64 H90cm

Internal Dimensions - D51 W48 H66cm

4 x Shelves - 45 x 45cm

1 Tray - 40 x 29 x 5cm


Image of item

£ 735.00 (ex. VAT) 1 in stock

LTE Scientific IP100-U Laboratory Incubator Lab

ITEM-36518

LTE Scientific IP100-U Laboratory Incubator


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in reasonably good cosmetic condition with minor marks. (Digital thermometer not included).



Items 41 to 60 of 142

Filters

Price (£)

to

Condition

Category filters

Type

Heating Method

Refrigeration

CO2 Sensor Type

With Hot Air Sterilisation

Humidifier

Minimum Temperature (°C)

to

Maximum Temperature (°C)

to

CO2 Functions Working

With UV Lamp

Physical Specifications

Configuration

Interior Volume (l)

to