Incubators and Growth Chambers

RECERTIFIED ITEM

£ 1,350.00 (ex. VAT) 1 in stock

Sanyo MCO-18AC CO2 Incubator Lab

ITEM-38888

Sanyo MCO-18AC CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

It is in good cosmetic condition.

This unit has been professionally serviced and is in full working order.

The service report is available on request.

£ 1,350.00 (ex. VAT) 1 in stock

New Brunswick Innova 4300 Incubator Shaker Lab

ITEM-46265

New Brunswick Innova 4300 Incubator Shaker

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in reasonably good cosmetic condition. It functions well, although it is slow to reach the set RPM.

Includes:

Flask Mounts with Fittings
Test Tube Holding Racks

RECERTIFIED ITEM

£ 1,350.00 (ex. VAT) 1 in stock

Hera Cell 150 Incubator Heraeus Thermo Electron Corporation Lab

ITEM-41601

Hera Cell 150 Incubator Heraeus Thermo Electron Corporation Lab

This item was removed from a university where it was surplus to requirement.

The unit has been recertified, and is in reasonably good cosmetic condition.

RECERTIFIED ITEM

£ 1,350.00 (ex. VAT) 1 in stock

Kendro HeraCell 150 Heraeus Incubator Lab

ITEM-41645

HeraCell 150 Heraeus Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit has been recertified and is in good working order.

£ 1,300.00 (ex. VAT) 1 in stock

Jouan Water Jacketed Incubator Model IG150 Lab

ITEM-29770

This Jouan Water Jacketed Incubator Model IG150 was removed from a university lab where it was surplus to requirements.

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with both a temp and CO2 sensor (not included). It is in good working order but will require calibration upon installation.

It is in good cosmetic condition with minor marks.

Internal dimensions are: L41cm x W41cm x H60cm.

£ 1,300.00 (ex. VAT) 1 in stock

New Brunswick Scientific Classic C24 Incubator Shaker Lab

ITEM-31977

This New Brunswick Scientific Classic C24 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit is in good working order and has been tested with a digital thermometer (not included). It runs well up to 400rpm.

It is in reasonable cosmetic condition but has some fairly heavy usage marks.

Internal dimensions - L54 W52 H36cm

Shaker Platform - 45.5 x 45.5cm

Tube stand inside holds 20 x 50ml tubes

£ 1,270.00 (ex. VAT) 1 in stock

Jouan IGO150 CELLlife CO2 Laboratory Incubator Lab

ITEM-17203

This Jouan IGO150 CELLlife CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Temp and CO2 sensor not included). While it was working well with our equipment and in our testing room, it may require calibration to your equipment and lab environment upon installation.

It is in reasonably good cosmetic condition with some marks from use. The front right leg is bent, but is level.

Internal dimensions 48x58x48cm LWH

£ 1,250.00 (ex. VAT) 1 in stock

BMG LabTechnologies ThermoStar Microplate Incubator Shaker Lab

ITEM-46380

BMG LabTechnologies ThermoStar Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in working order.

£ 1,150.00 (ex. VAT) 1 in stock

Nuaire Laboratory Incubator NU-5510E Lab

ITEM-46364

Nuaire Laboratory Incubator Model NU-5500E Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in very good cosmetic condition.

£ 1,150.00 (ex. VAT) 1 in stock

Nuaire Model: NU-5510E Co2 Incubator Lab

ITEM-38256

Nuaire NU-5510E CO₂ Incubator

This item was removed from a laboratory where it was surplus to requirements.

The incubator is in excellent cosmetic condition and has been tested for basic functionality.

It powers up and is in good working order (thermometer & CO₂ analyser not included).

Specifications:

Model: NU-5510E
Serial No.: 153406102512
Year of Manufacture: 2012
Temperature Range: 18°C to 55°C
CO₂ Range: 0% to 20%
Features: Four shelves, humidifying pan, operating instructions, as-new door latch and seal

£ 1,100.00 (ex. VAT) 1 in stock

Sanyo MCO-20AIC C02 Incubator Lab

ITEM-35304

Sanyo MCO-20AIC C02 Incubator

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer and CO2 sensor not included).

It is in good cosmetic condition internally and externally.

Internal dimensions are as follows:

L57cm x W45cm x H66cm.

Features:

2 x Shelves

SPARES/REPAIR ITEM

£ 1,050.00 (ex. VAT) 1 in stock

New Brunswick Innova Model 4330 Incubator Shaker Lab Spares/Repairs

ITEM-40992

New Brunswick Innova Model 4330 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit heats but does not cool. The shaking works, but requires maintenance.

It is sold for spares/repairs.

£ 1,040.00 (ex. VAT) 1 in stock

New Brunswick Scientific G-25 Foor Standing Incubator Shaker Lab

ITEM-35604

New Brunswick Scientific G-25 Foor Standing Incubator Shaker

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in full working order.

It is in reasonable cosmetic condition but has seen some heavy use and has lots of marks and scuffs.

Shaker platform - 76 x 46cm

£ POA 1 in stock

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300 Lab

ITEM-45450

This item is new in stock. Please enquire for further details.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Sartorius Certomat BS-1 Double Stack Shaking Incubator Lab Spares/Repairs

ITEM-45555

Sartorius Certomat BS-1 Double Stack Shaking Incubator

This item was removed from a university laboratory where it was surplus to requirements.

Both incubator units are in good used cosmetic condition and power on, but each has functional issues:

Top Unit: Heats up as expected but does not shake.
Bottom Unit: Powers up but displays an error message in German on startup and continuously loops the startup sequence.

Efforts to troubleshoot both units were unsuccessful, and therefore are sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

HT Infors Multitron Triple Stack Incubator with Humidity and CO2 Lab Faulty

ITEM-45145

HT Infors Multitron II Triple Stack Shaking Incubator

This system was removed from a university laboratory where it was surplus to requirements.

The incubator units are in reasonably good cosmetic condition, showing signs of general use, with some marks.

The working condition of each unit is stated below.

Top and Middle Units: Operational except for faulty CO₂ sensors. Replacement sensors (GMP251) are recommended.

Bottom Unit: Requires replacement of blower motors and rear cooling fan for full operation.

The throw of the shaker plate could not be determined; however, the middle and top units operated reliably at 250 rpm.

Due to the above listed faults regarding all units, this incubator system is listed as Spares/Repair.

Includes:

Triple-stack shaking incubators with top and middle units operational
CO₂ control with Vaisala GMP221 sensor (replacement model: GMP251 recommended)
Triple-stacked configuration with CO₂ and humidity features

Model: Multitron II

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

New Brunswick Innova 4330 Incubator Shaker Lab Spares/Repairs

ITEM-40991

This New Brunswick Innova 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up but does not shake. The heating and cooling functions work.

It is in reasonably good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova CO-170 Lab Spares/Repairs

ITEM-40039

New Brunswick Scientific Innova CO-170 Lab

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in fairly poor cosmetic condition with some rust, it has been temperature-tested. (thermometer not included)

The unit developed a back-light fault in the screen during CO2 testing. It is sold as Spares/Repair.

£ 1,000.00 (ex. VAT) 1 in stock

Wheaton Science Products Model: 1057606-D Reach-In Co2 Incubator Lab

ITEM-38252

Wheaton Science Products Model: I057606-D Reach-In Co2 Incubator

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (Thermometer, CO2 analyser and Socket tester are not included).

It is in good cosmetic condition both internally and externally.

Specifications.

Includes 10 x shelves.
Internal Volume: 1000 litres.
Model: I057606-D.
Serial No: I057606-D.

SPARES/REPAIR ITEM

£ 950.00 (ex. VAT) 1 in stock

New Brunswick Innova Type 4330 Incubator Shaker Lab

ITEM-40993

This New Brunswick Innova Type 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up and heats, but does not cool or shake.

It is sold for spares/repairs.

£ 910.00 (ex. VAT) 1 in stock

Genlab Model SP/LCI/320/SS/DIG Lab Incubator

ITEM-38911

Genlab SP/LCI/320/SS/DIG Laboratory Incubator

This was removed from a working lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with minor marks

6 Baskets/Drawers - 51 x 50 x 15cm

£ 800.00 (ex. VAT) 1 in stock

Nuaire Laboratory CO2 Incubator Model NU-5500E Lab

ITEM-46363

Nuaire Laboratory Incubator Model NU-5500E Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

New Brunswick Innova 44R Refrigerated Shaking Incubator Lab Spares/Repairs

ITEM-45166

New Brunswick Innova 44R Incubator Broken Shaker Lab

This item was removed from a university lab where it was surplus to requirements.

The incubator is in reasonable good used cosmetic condition, with some rust around the edges of the lower base.

The unit powers on and was successfully temperature tested. However, it has a faulty shaker motor and stuck bolts on the shaker plate, which require significant work for repair, but is entirely possible for someone to do.

Due to the faulty shaker element, this item is listed as Spares/Repair.

Specifications:

Model: Innova 44R
Condition: Fair, requires repair for shaker motor
Functionality: Incubation temperatures tested and reached correctly

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-17AI CO2 Incubator Lab

ITEM-44771

Sanyo MCO-17AI CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

Specifications;

Model: MCO-17AI
Serial#: 90100724

£ 750.00 (ex. VAT) 1 in stock

Stuart SI60 Clear Chamber Forced Air Incubator, 60 L Lab

ITEM-44775

Stuart SI60 Clear Chamber Forced Air Incubator, 60 L Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order.

Specifications:

Model: SI60
Serial#: R000100205

£ 745.00 (ex. VAT) 1 in stock

Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator Lab

ITEM-29757

This Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. It will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item has 4 shelves.

Internal dimensions are L49cm x W48cm x H66cm.

£ 745.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator Lab

ITEM-29766

This Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator was removed from a university lab where ti was surplus to requirements.

The unit powers up and is in good working order but will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item is supplied with 4 shelves.

Internal dimensions are L45cm x W45cm x H66cm.

£ 715.00 (ex. VAT) 1 in stock

LTE Scientific IP100-U Laboratory Incubator Lab

ITEM-36518

LTE Scientific IP100-U Laboratory Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in reasonably good cosmetic condition with minor marks. (Digital thermometer not included).

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Sanyo MIR-553 Incubator Lab Spares/Repairs

ITEM-36207

Sanyo MIR-553 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but the power relay is short circuited so it runs overtemp.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Infors Minitron Shaking Incubator Model AI 72 Lab Spares/Repairs

ITEM-44641

Infors Shaking Incubator Model-AI 72 Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition, but the door does not remain shut. The unit powers on, however, when setting the desired temperature, it remains at ambient temperature and does not raise to lower.

Therefore, it is listed as Spares/Repair.

£ 700.00 (ex. VAT) 1 in stock

Grant-Bio PHMP-4 Microplate Thermoshaker Lab

ITEM-46367

Grant-Bio PHMP-4 Microplate Thermoshaker

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and is in full working order.

This psu is included.

£ 675.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus Lab

ITEM-29748

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus

This was removed from a university lab where it was surplus to requirements.

The unit powers up and both the incubation and CO2 function have been tested. It is in good working order (Temp & CO2 sensor not included).

It is in reasonable cosmetic condition but has seen some heavy use on the inside. It is purely cosmetic though.

£ 610.00 (ex. VAT) 1 in stock

Heraeus Function Line Incubator Model B 12 Lab

ITEM-45257

Heraeus Function Line Incubator Type-B12

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition both internally and externally, however it does not feature an inside glass door.

£ 600.00 (ex. VAT) 1 in stock

Sanyo CO2 Laboratory Incubator MCO-17AIC IR Lab

ITEM-29769

This Sanyo CO2 Laboratory Incubator MCO-17AIC was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order, but will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use. The handle has come off, but this does not affect the operation of the unit.

Item is supplied with 4 shelves.

Internal dimensions are: L45cm x W45cm x H66cm.

£ 600.00 (ex. VAT) 1 in stock

Heraeus Function Line Incubator Type B 12 Lab

ITEM-45256

Heraeus Function Line Incubator Type-B12

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

SPARES/REPAIR ITEM

£ 600.00 (ex. VAT) 1 in stock

Sanyo MIR-253 Cooling Laboratory Incubator Lab

ITEM-39066

Sanyo MIR-253 Cooling Laboratory Incubator

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably poor cosmetic condition with noticeable damage.

Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 600.00 (ex. VAT) 1 in stock

Sanyo Versatile Environmental Test Chamber Model - MLR-351H Lab Humidity Fault

ITEM-28096

This Sanyo Versatile Environmental Test Chamber Model - MLR-351H was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer(not included). The water tank for humidity operation is missing from this unit, therefore it is listed as Spares/Repair.

The temperature was first set to 37˚c, when reached, the thermometer read 38.8˚c

The temperature was then set to the maximum temp of 50˚c, when reached, the thermometer read 52.2˚c

Finally, the temperature was set to the minimum of 0˚c, when dropped to, the thermometer read 3.1˚c.

Inside dimensions - D47 W50 H123cm

1 Shelf - 41 x 49cm

It is in reasonably good cosmetic condition with marks from use.

£ 555.00 (ex. VAT) 1 in stock

Genlab LCI/12V/DIG/SMC Laboratory Incubator Lab

ITEM-38914

Genlab Model LCI/12V/PDIG Lab Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer not included)

4 Shelves - 60 x 60cm

£ 550.00 (ex. VAT) 1 in stock

Genlab Prime PRI/150 Laboratory Incubator Lab

ITEM-38908

Genlab Prime PRI/150 Laboratory Incubator

This was removed from a working lab where it was surplus to requirements

The unit powers up and is in full working order. It is in good cosmetic condition with minor marks.

2 Shelves - 49 x 48cm

£ 550.00 (ex. VAT) 1 in stock

Genlab LCI/12V/DIG/SMC Lab Incubator

ITEM-38913

Genlab Model LCI/12V/PDIG Lab Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer not included)

3 Shelves - 60 x 60cm

£ 540.00 (ex. VAT) 1 in stock

Genlab Model LCI/12V/PDIG Lab Incubator

ITEM-38912

Genlab Model LCI/12V/PDIG Lab Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer not included)

7 Shelves - 61 x 61cm

£ 525.00 (ex. VAT) 1 in stock

Jouan EB170 Electron Sans Ther Laboratory Incubator Lab

ITEM-37023

Jouan EB170 Electron Sans Ther Laboratory Incubator

This was removed from a working lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in reasonably good cosmetic condition with marks from use.

2 Shelves - 47 x 47cm

£ 500.00 (ex. VAT) 1 in stock

Sanyo Incubator Model-MIR162 Lab

ITEM-46408

Sanyo Incubator Model-MIR162 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Lot Of 7 x Rotisserie Bottle/Tube Holders For Incubator Lab

ITEM-41459

Lot Of 7 x Rotisserie Bottle/Tube Holders For Incubator

All items are in good cosmetic condition with minimal wear

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator MCO-17AIC Lab Spares/Repairs

ITEM-39947

Sanyo CO2 Incubator MCO-17AIC

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has an issue with CO2 leaking.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo Stability Chamber PSC022.AHB.C

ITEM-36816

This was removed from a university lab where ti was surplus to requirements.

The unit does not power up. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 240i CO2 Incubator Lab Spares/Repairs

ITEM-31726

Thermo Scientific Heracell 240i CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit has no screen and required a new CO2 sensor prior to the screen being removed.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CO2 Laboratory Incubator Model CB 150 Lab Spares/Repairs

ITEM-38060

This was removed from a university lab where it was surplus to requirements

The unit powers up and works but has a faulty CO2 sensor.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CO2 Incubator CB 150 Lab Spares/Repairs

ITEM-39061

Binder CO2 Incubator CB 150

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on. (Thermometer not included)

This item does not have a CO2 fitting attached, therefore we are unable to test the CO2 function. The fan chamber is also noisy.

Due to this lack of testing, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CB 150 CO2 Incubator Lab Spares/Repairs

ITEM-40989

Binder CB 150 CO2 Incubator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

This item does not power on, therefore it is sold as Spares or Repairs.

Incubators and Growth Chambers

Filters