Incubators and Growth Chambers
Items 141 to 160 of 186
£ 320.00 (ex. VAT) 1 in stock
Heraeus HeraCell 240 CO2 Laboratory Incubator Lab
ITEM-24395
This Heraeus Hera Cell 240 Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The unit powers on and was charged with CO2 to 5% and tested with a digital thermometer (not included).
The temperature was set to 37˚c which it reached after running for an hour. (the thermometer read 41˚c)
It was then set to the maximum of 55˚c and it reached about an hour or so later (the thermometer read 59˚c).
It is in reasonable, used cosmetic condition with marks from use.
Inside dimensions - D56 W61 H67 CM
2 Shelves - 50 x 56cm
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 315.00 (ex. VAT) 1 in stock
Thermo Scientific Forma Reach-In CO2 Laboratory Incubator Model 3951 Lab
ITEM-19875
This Thermo Scientific Forma Reach-In CO2 Laboratory Incubator Model - 3951 was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in good working order. The full report is available on request.
It is in reasonably good cosmetic condition with some marks and stains from use.
Internal dimensions - D66.5 x W78.5 x H152cm
£ 315.00 (ex. VAT) 1 in stock
Sanyo CO2 Laboratory Incubator Model - MCO-17AIC Lab
ITEM-26276
This Sanyo CO2 Laboratory Incubator Model - MCO-17AIC was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with 5% CO2 and a digital thermometer (not included). It is in reasonably good cosmetic condition with some marks from use. The plastic handle has snapped off the front of the unit but it is purely cosmetic.
The temperature was set to 37˚c and charged with 5% CO2 - It reached 36.5˚c before it seemed to stop but the thermometer read 37.9˚c and the CO2 was steady at 5%.
The temperature was then set to its maximum of 50˚c and it reached after around 4 hours with the thermometer reading 52.5˚c.
External dimensions - D72 W64 H91cm
Internal - D51 W49 H65cm
3 Shelves - 45 x 45cm
£ 310.00 (ex. VAT) 1 in stock
Nuaire Co2 Air Jacketed Automatic Incubator NU 5510 E Lab Faulty CO2 Sensor
ITEM-20233
This Nuaire Co2 Air Jacketed Automatic Incubator NU 5510 E was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). The temperature sensor was replaced and seems to be working as it should. However, the unit appears to have a faulty CO2 sensor and will not regulate properly.
When set at 37ºC the display showed 37˚C and our thermometer read 37.7ºC
When set at 55ºC the display showed 58.4˚C and our thermometer read 55.5ºC
Unit dimensions L68cm x W65cmx H103cm
Interior dimensions:
H60cm x W50cm x D48cm
£ 300.00 (ex. VAT) 1 in stock
Baker ReCO2ver Plus Rapid Recovery Incubator Lab Spares/Repairs
ITEM-31379
Baker ReCO2ver Plus Rapid Recovery Incubator
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has a heating issue.
It is sold for spares/repairs.
£ 275.00 (ex. VAT) 1 in stock
Thermo Electron Heraeus Function Line Type B 12 Incubator Lab
ITEM-35091
This Thermo Electron Heraeus Function Line Type B 12 Incubator was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.
It is in good cosmetic condition with minor marks from use
2 Shelves - 50 x 35cm
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 250.00 (ex. VAT) 1 in stock
Sanyo CO2 Laboratory Incubator MCO-19AIC (UVH) Lab
ITEM-31242
This Sanyo CO2 Laboratory Incubator MCO-19AIC (UVH) was removed from a university alb where it was surplus to requirements.
The unit has been professionally serviced and is in good working order. It will require calibration on installation.
It is in good cosmetic condition with minor marks from use.
Internal dimensions - D51 W48 H66cm
4 Shelves - 45 x 45cm
£ 240.00 (ex. VAT) 1 in stock
Heto Holten CO2 Incubator Model - CellHouse 170 - 001 Lab
ITEM-23284
This Heto Holten CO2 Incubator Model - CellHouse 170 - 001 was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). The incubator has been charged with 5% CO2 and everything appears to be working well.
When set to 37˚C the display showed 37˚C and the thermometer measured 37.9˚C.
When set to the max of 50˚C the display showed 49.5˚C and the thermometer measured 51˚C.
It is in good cosmetic condition with some marks from use.
Inside dimensions - D55.5 W50 H56cm
3 Shelves 52 x 49cm
1 Tray 49 x 36 x 4cm
£ 240.00 (ex. VAT) 1 in stock
LMS Cooled Refrigerated Laboratory Incubator Model - 305 Lab
ITEM-26190
This LMS Cooled Laboratory Incubator Model - 305 was removed from a university lab where it was surplus to requirements.
The unit powers up and was tested with a digital thermometer (not included).
It is in reasonably good cosmetic condition with some marks from use.
It was cooled down to 4˚C which it reached after about 15 minutes. it was then set to -10˚C. It reached -9˚C after a couple of hours.
It was then set to 37˚C which it reached in 10 minutes and then 50˚C which it reached in a further 10 minutes.
Inside dimensions - D20-28 W44 H53cm
Upper shelf - 27 x 43cm
Lower shelf - 13 x 4cm
£ 235.00 (ex. VAT) 1 in stock
Sanyo Laboratory Incubator MCO-17AI CO2 Lab
ITEM-30546
This Sanyo Laboratory Incubator MCO-17AI CO2 was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in good working order. It has had a brand new sample pump fitted. The report is available on request. It will require calibration upon installation.
It is in good cosmetic condition with minor marks from use.
4 x Shelves 45 x 45cm
£ 235.00 (ex. VAT) 1 in stock
Gallenkamp Plus II Laboratory Incubator Cat No. IPL.075.FD1.C Lab
ITEM-24814
This Gallenkamp Plus II Laboratory Incubator Cat No. IPL.075.FD1.C was removed from a university lab where it was surplus to requirements.
The item is in reasonable cosmetic condition but has marks and stains from use.
The unit powers on fine and the interior shaker works as intended however the higher it is set on the dial the slower it goes and vice versa. The shaker cannot be operated at temperatures higher than 60˚C.
The unit was tested with a digital thermometer (not included)
When set to 37˚C the display showed 35.6˚C and the thermometer 37.3˚C.
When set to 60˚C the display showed 56.8˚C and the thermometer 58.7˚C.
We then removed the shaker and the oven was set to 108˚C, which is the highest we could get it to go on the dial.
It reached 98.6 according to the display, while the thermometer measured 104.0˚C.
The shaker is a Gallenkamp Shaker Platform Cat no. IPL000.0S1.9.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 220.00 (ex. VAT) 1 in stock
Sanyo Laboratory CO2 Incubator MCO-19AIC Lab
ITEM-31975
This Sanyo Laboratory CO2 Incubator MCO-19AIC was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in good working order. It will require calibration upon installation.
It is in good cosmetic condition with minor marks from use.
Internal dimensions - L51 W48 H66cm
3 x Shelves - 45 x 45cm
£ 215.00 (ex. VAT) 1 in stock
Heraeus B 6030 Benchtop Laboratory Incubator Lab
ITEM-24746
This Heraeus B 6030 Benchtop Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition There are some light tape markings and a scratch on the LHS of the unit from general use.
The digital LCD screen is slightly faulty but we were still able to read it well enough.
Interior dimensions:
W36cmx H20cm x D36cm
The unit was tested with a digital thermometer (not included).
Set temp at 37ºC our thermometer read 38.9ºC
Set temp at 55ºC our thermometer read 56.5ºC
Set temp at 70ºC our thermometer read 71.3ºC
£ 200.00 (ex. VAT) 1 in stock
Sanyo CO2 Laboratory Incubator Model - MCO-17AI Lab
ITEM-27470
This Sanyo CO2 Laboratory Incubator Model - MCO-17AI was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with 5% CO2 and measured with a digital thermometer (not included).
It was set to 37˚C which it reached in 2 hours. It was then set to 50˚C which took a further hour to reach.
The digital thermometer was consistent with the readings on the display.
The plastic door handle has snapped but that doesn't seem to affect the operation of the unit at all.
Internal dims - D49.5 W49 H65cm
2 Shelves - 45 x 45cm
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 200.00 (ex. VAT) 1 in stock
RS Biotech Galaxy S+ 170-200 Plus CO2 Laboratory Incubator Lab
ITEM-35093
This RS Biotech Galaxy S+ CO2 Laboratory Incubator was removed from a university lab where ti was surplus to requirements.
The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It will require calibration upon installation.
It is in good cosmetic condition with minor marks from use.
3 Shelves - 52 x 42.5cm
£ 200.00 (ex. VAT) 1 in stock
NAPCO Water-Jacketed CO2 Laboratory Incubator Model no. 7101 Lab
ITEM-19305
This NAPCO Water-Jacketed CO2 Laboratory Incubator Model no. 7101 was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included0. It was first set to 37˚C which it reached after about half an hour. It was then set to the max of 50˚C which it reached after about 2 hours. Our thermometer measures the temperature at 59˚C. It was not tested with water or CO2.
It is in reasonable cosmetic condition but has plenty of marks and stains from use.
Internal dimensions -D42 x W46 x H63cm
3 Shelves - 42.5 x 42.5cm
£ 185.00 (ex. VAT) 1 in stock
Heraeus Benchtop Laboratory Incubator Type - B 5060 EK-CO2 Lab
ITEM-28140
This Heraeus Benchtop Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The unit has been tested with a digital thermometer (not included) at 5% CO2.
The temperature was first set to 37°c, it took around two hours to reach.
The temperature was then set to its max of 50°c but it only reached as high as 43.7˚c on the thermometer after running for nearly 6 hours.
Our external CO2 Gauge only registered 3.8% CO2 while it was running.
Internal dimensions - D57 W60 H60.5cm
6 x Shelves - 51 x 27cm
£ 170.00 (ex. VAT) 1 in stock
B&T Unitemp Benchtop Laboratory Incubator Lab
ITEM-24675
The unit powers on and is in good cosmetic condition. The unit does have tape marks and surface stains around it from general use. The rubber seal on the door is quite dirty and stained from general use.
The unit was tested with a digital thermometer (not included).
When set to 37ºC our thermometer read 29.8ºC
When set to 65ºC our thermometer read 46.6ºC
When set to 100ºC our thermometer read 79.3ºC
The unit was powered on for most of a morning to reach these temperatures.
Interior dimensions:
H36cm x W38cm x D32cm
£ 160.00 (ex. VAT) 1 in stock
Heraeus BBK 6220 CO2 Laboratory Incubator Lab Spares/Repairs Faulty CO2
ITEM-35468
Heraeus BBK 6220 CO2 Laboratory Incubator Lab Spares/Repairs
This was removed from a university lab where it was surplus to requirements.
The unit powers up and the incubation works, but the CO2 control is faulty.
It is in good cosmetic condition with marks from use.
it is sold for spares/repairs.
£ 135.00 (ex. VAT) 1 in stock
Thermo Scientific Heraeus BB15 CO2 Laboratory Incubator Lab
ITEM-30240
This Thermo Scientific Heraeus BB15 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The item powers on and is in reasonably good used cosmetic condition. The interior is a bit corroded/coated. It was tested with a digital thermometer (not included) as well as a CO2 Sensor (not included).
When the temperature was set to 37˚c, the thermometer read 37.9˚c
When the temperature was set to 55˚c (max) the thermometer read 56.6˚c
The CO2 was set to 5.0% and held when calibrated, reading 5.1% on our sensor
Internal dimensions - D51 W47 H60cm
3 Shelves - 47 x 43cm
Items 141 to 160 of 186