Incubators and Growth Chambers

£ POA 1 in stock

Thermo Scientific Heraeus Cytoperm 2 CO2 Incubator Lab

ITEM-35704

This item is new in stock. Please enquire for further details.

Image of Thermo Scientific MaxQ 6000 Refrigerated Incubator Shaker SHKE6000-8CE Faulty

SPARES/REPAIR ITEM

£ 1,425.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 6000 Refrigerated Incubator Shaker SHKE6000-8CE Faulty

ITEM-19907

This Thermo Scientific MaxQ 6000 Incubator Shaker Model - 4360 was removed from a university lab where it was surplus to requirements.

The unit has a power board fault.

It is in reasonably good cosmetic condition with some marks from use. The door also does not close properly.

Internal dimensions - D52 x W55 x H67cm

1 Shelf - 52 x 54cm

Shaker Plate - 45 x 45cm

It is sold for spares or repairs due to the electrical fault.

RECERTIFIED ITEM

£ 1,350.00 (ex. VAT) 1 in stock

Sanyo MCO-18AC CO2 Incubator Lab

ITEM-38888

Sanyo MCO-18AC CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

It is in good cosmetic condition.

This unit has been professionally serviced and is in full working order.

The service report is available on request.

£ 1,310.00 (ex. VAT) 1 in stock

Climacell CLC-B2V-M / CLC 111-TV Cooling Incubator Lab

ITEM-36470

Climacell CLC-B2V-M / CLC 111-TV Cooling Incubator

This was removed from a working lab where it was surplus to requirements.

The unit powers up and is in full working order. (Thermometer not included).

It is in good cosmetic condition with minor marks.

£ 1,300.00 (ex. VAT) 1 in stock

Jouan Water Jacketed Incubator Model IG150 Lab

ITEM-29770

This Jouan Water Jacketed Incubator Model IG150 was removed from a university lab where it was surplus to requirements.

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with both a temp and CO2 sensor (not included). It is in good working order but will require calibration upon installation.

It is in good cosmetic condition with minor marks.

Internal dimensions are: L41cm x W41cm x H60cm.

£ 1,300.00 (ex. VAT) 1 in stock

New Brunswick Scientific Classic C24 Incubator Shaker Lab

ITEM-31977

This New Brunswick Scientific Classic C24 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit is in good working order and has been tested with a digital thermometer (not included). It runs well up to 400rpm.

It is in reasonable cosmetic condition but has some fairly heavy usage marks.

Internal dimensions - L54 W52 H36cm

Shaker Platform - 45.5 x 45.5cm

Tube stand inside holds 20 x 50ml tubes

£ 1,270.00 (ex. VAT) 1 in stock

Jouan IGO150 CELLlife CO2 Laboratory Incubator Lab

ITEM-17203

This Jouan IGO150 CELLlife CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Temp and CO2 sensor not included). While it was working well with our equipment and in our testing room, it may require calibration to your equipment and lab environment upon installation.

It is in reasonably good cosmetic condition with some marks from use. The front right leg is bent, but is level.

Internal dimensions 48x58x48cm LWH

Image of New Brunswick Galaxy 170 S CO2 Laboratory Incubator Model - CO170S-230-1000 Lab

RECERTIFIED ITEM

£ 1,270.00 (ex. VAT) 1 in stock

New Brunswick Galaxy 170 S CO2 Laboratory Incubator Model - CO170S-230-1000 Lab

ITEM-19862

This New Brunswick Galaxy 170 S CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in good working order.

Internal dimensions - D45 W53 H69cm

4 Shelves 43 x 52cm

1 Tray - 35 x 33 x 4cm

It is in reasonably good cosmetic condition with some marks from use.

£ POA 1 in stock

Weiss Gallenkamp Fitotron Arctic Plant Growth Chamber Ducted With Elta Fan

ITEM-38082

This item is new in stock. Please enquire for further details.

£ 1,250.00 (ex. VAT) 1 in stock

Sanyo Laboratory CO2 Incubator Stack Models - MCO-17AIC / MCO-17AI Lab

ITEM-24501

Sanyo Laboratory CO2 Incubator Stack Models - MCO-17AIC / MCO-17AI

These were removed from a university lab where they were surplus to requirements.

The units power up and are in good working order. They were tested with a digital thermometer (not included).

They are in good cosmetic condition with minor marks from use.

1x Sanyo CO2 Incubator:

Model - MCO-17AI

SN - 90705826

Inside dimensions - D51 W49 H66.5cm

3 Shelves 46 x 46cm

1 Tray 46.5 x 36.5 x 4cm

1x Sanyo CO2 Incubator:

Model - MCO-17AIC

SN - 10100758

Inside dimensions - D51 W49 H66.5cm

2 Shelves 46 x 46cm

1 Tray 41 x 31 x 5cm

RECERTIFIED ITEM

£ 1,250.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300 Lab

ITEM-37017

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order. A report is available on request.

It is in good cosmetic condition with minor marks.

2 Shelves - 52 x 48cm

£ 1,230.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator Double Stack MCO-17AI MCO-18AIC (UV) Lab

ITEM-32019

This Sanyo CO2 Incubator Double Stack MCO-17AI MCO-18AIC (UV)was removed from a university lab where it was surplus to requirements.

Both units have been tested with and CO2 and temperature sensor and are in good working order. They will require calibration upon installation.

They are in good cosmetic condition with minor marks from use.

Top:-

Model - MCO-17AI

SN - 60301691

External dimensions - L70 W63 H90cm

Internal dimensions - L50 W48 H66cm

3 Shelves - 45 x 45cm

Net Weight - 91kg

Bottom:-

Model - MCO-18AIC (UV)

SN - 31112791

External dimensions - L71 W64 H91cm

Internal dimensions - L51 W48 H66cm

3 Shelves - 45 x 45cm

Net Weight - 93kg

£ POA 1 in stock

Weiss Gallenkamp Fitotron Plant Growth Chamber Ducted with Fan Lab Faulty

ITEM-38079

This item is new in stock. Please enquire for further details.

£ POA 1 in stock

Weiss Gallenkamp Fitotron Arctic Plant Growth Chamber Ducted with Fan Faulty

ITEM-38078

This item is new in stock. Please enquire for further details.

£ POA 1 in stock

Stuart Orbital Incubator - Model SI500 Lab

ITEM-44716

This item is new in stock. Please enquire for further details.

RECERTIFIED ITEM

£ 1,135.00 (ex. VAT) 1 in stock

Panasonic CO2 Laboratory Incubator Model - MCO-18AC-PE Lab

ITEM-19463

This Panasonic CO2 Laboratory Incubator Model - MCO-18AC-PE was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced. It is in good working order. It will require calibration on installation.

It is in good cosmetic condition and is clean inside.

Internal dimensions - L51 x W48 x H67cm

2 Shelves - 46 x 45cm

£ 1,110.00 (ex. VAT) 1 in stock

Binder KB 115 Lab Cooling Incubator Laboratory

ITEM-39708

Binder KB 115 Lab Cooling Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

It is in reasonably good cosmetic condition but has marks from age and use.

Includes 4 shelves.

£ 1,100.00 (ex. VAT) 1 in stock

Sanyo MCO-20AIC C02 Incubator Lab

ITEM-35304

Sanyo MCO-20AIC C02 Incubator

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer and CO2 sensor not included).

It is in good cosmetic condition internally and externally.

Internal dimensions are as follows:

L57cm x W45cm x H66cm.

Features:

2 x Shelves

£ 1,090.00 (ex. VAT) 1 in stock

Sanyo CO2 MCO-20AIC Laboratory Incubator Lab

ITEM-29761

This Sanyo CO2 MCO-20AIC Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit is in good working order but will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item is supplied with 3 shelves.

Internal dimensions are L58cm x W45cm x H66cm.

SPARES/REPAIR ITEM

£ 1,050.00 (ex. VAT) 1 in stock

New Brunswick Innova Model 4330 Incubator Shaker Lab Spares/Repairs

ITEM-40992

New Brunswick Innova Model 4330 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit heats but does not cool. The shaking works, but requires maintenance.

It is sold for spares/repairs.

£ 1,040.00 (ex. VAT) 1 in stock

New Brunswick Scientific G-25 Foor Standing Incubator Shaker Lab

ITEM-35604

New Brunswick Scientific G-25 Foor Standing Incubator Shaker

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in full working order.

It is in reasonable cosmetic condition but has seen some heavy use and has lots of marks and scuffs.

Shaker platform - 76 x 46cm

£ 1,000.00 (ex. VAT) 1 in stock

Oaken Commercial Incubator & Hatcher Lab

ITEM-37224

Oaken Commercial Incubator & Hatcher

This item was removed from a university lab where it was surplus to requirements.

The incubator powers on, with the internal light and fan in working order.

The unit is in reasonable cosmetic condition and in working order (thermometer not included).

Includes:

12 x Egg Trays (Dimensions: 50 x 36 cm, each holding up to 88 eggs)

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova CO-170 Lab Spares/Repairs

ITEM-40039

New Brunswick Scientific Innova CO-170 Lab

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in fairly poor cosmetic condition with some rust, it has been temperature-tested. (thermometer not included)

The unit developed a back-light fault in the screen during CO2 testing. It is sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

New Brunswick Innova 4330 Incubator Shaker Lab Spares/Repairs

ITEM-40991

This New Brunswick Innova 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up but does not shake. The heating and cooling functions work.

It is in reasonably good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC Lab Spares/Repairs

ITEM-36845

This Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC was removed from a university lab where it was surplus to requirements.

The unit powers up but shows the following error.

M26 - LAMP COOLING BLOWER FAILURE.

The manual states:

1. The blower is bad.

2. The blower relay is bad.

3. The airflow switch is bad.

We have been advised that the system is missing some essential parts. These parts are available from the manufacturer.

It is in otherwise good cosmetic condition with minor marks.

It is sold for spares/repairs due to the error.

£ 1,000.00 (ex. VAT) No longer available

Binder C150 CO2 Laboratory Incubator Lab

ITEM-23983

This Binder C150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with marks from use.

It is in good working order but will require calibration upon installation.

The internal dimensions are H 59cm x W 49cm D 49cm

There are 3 shelves with 6 fitting positions

SPARES/REPAIR ITEM

£ 985.00 (ex. VAT) 1 in stock

Lab Companion IS-971R Shaking Incubator Lab Cooling Fault

ITEM-39716

Lab Companion IS-971R Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has a cooling fault. It is seemingly in otherwise working condition.

It is in good cosmetic condition with minor marks

It is sold for spares/repairs.

RECERTIFIED ITEM

£ 975.00 (ex. VAT) 1 in stock

Revco Habitat CO2 Water Jacketed Incubator Model no. RCO3500TWBB Lab

ITEM-28101

This Revco Habitat CO2 Water Jacketed Incubator Model no. RCO3500TWBB was removed from a university lab where it was surplus to requirements.

The unit has been fully tested and recertified by a qualified service engineer. The report is available on request if you would like to see it.

The unit has a water jacket that will require a top-up on installation. The unit will require 8-10 hours to stabilise once installed.

It is in excellent cosmetic condition with some minor marks from use.

4 Shelves - 49.5 x 49.5cm

Internal dimensions - D52 W50 H55cm

SPARES/REPAIR ITEM

£ 950.00 (ex. VAT) 1 in stock

Medline Scientific Incubated Shaker Model - IS-971RF Spares/Repairs

ITEM-20411

This Medline Scientific Incubated Shaker Model - IS-971RF was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It was set to 37˚C but only reached 31˚C. The display would keep reverting to 22.2˚C as well. There was a note from the lab stating that it had some heating issues.

Inside dimensions - L89.5 x W63 x D48cm

Platform size - 46 x 76cm

The shaker speed ran up to 160rpm. We tried setting it to the max of 300 but it wouldn't run at that.

Cosmetically it is in a reasonable used condition but all the light tubes work bar one.

It is sold for spares/repairs due to the fault.

SPARES/REPAIR ITEM

£ 950.00 (ex. VAT) 1 in stock

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator Lab Faulty

ITEM-39911

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The system is faulty and requires a new controller.

It is in otherwise good cosmetic condition with minor marks.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 950.00 (ex. VAT) 1 in stock

New Brunswick Innova Type 4330 Incubator Shaker Lab

ITEM-40993

This New Brunswick Innova Type 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up and heats, but does not cool or shake.

It is sold for spares/repairs.

£ 910.00 (ex. VAT) 1 in stock

Genlab Model SP/LCI/320/SS/DIG Lab Incubator

ITEM-38911

Genlab SP/LCI/320/SS/DIG Laboratory Incubator

This was removed from a working lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with minor marks

6 Baskets/Drawers - 51 x 50 x 15cm

Image of Gallenkamp Laboratory Shaking Incubator Cat no. I0C400.XX2.C Lab Faulty

SPARES/REPAIR ITEM

£ 900.00 (ex. VAT) No longer available

Gallenkamp Laboratory Shaking Incubator Cat no. I0C400.XX2.C Lab Faulty

ITEM-19848

This Gallenkamp Laboratory Shaking Incubator Cat no. I0C400.XX2.C was removed from a university lab where it was surplus to requirements.

The unit powers up but is showing "er1". It was reported that the digital screen is working but the incubator can't increase/hold the temperature and the shaking rotor (RMP) is also not working.

It is in reasonably good cosmetic condition with marks and stains from general use.

Internal dimensions - 53.5 x 83cm - Depth - 43cm

Shaker Platform - 69 x 49cm

£ 895.00 (ex. VAT) 1 in stock

Genlab SP/LCI/320/SS/DIG Laboratory Incubator Lab

ITEM-38909

Genlab SP/LCI/320/SS/DIG Laboratory Incubator

This was removed from a working lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with minor marks, including a dent in the back panel.

6 Shelves - 51 x 50cm

Image of Heto Cellhouse 170 HI Model 170-300 CO2 Laboratory Incubator Lab

RECERTIFIED ITEM

£ 750.00 (ex. VAT) 1 in stock

Heto Cellhouse 170 HI Model 170-300 CO2 Laboratory Incubator Lab

ITEM-19303

This Heto Cellhouse 170 HI Model 170-300 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit has been fully tested and recertified by a service engineer. We have a copy of the report available if needed. It is fully working but the O2 sensor is out of date (user replaceable).

2 Shelves - 52 x 49cm

It is in good cosmetic condition but has some minor marks from use

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Thermo Scientific HERAcell Vios 160i CO2 Incubator Spares/Repairs

ITEM-30452

This was removed from a university lab where it was surplus to requirements.

The unit trips the testing room electrics when switched on. Upon investigation, we think the fault may have to do with heating element.

It is sold for spares/repairs.

£ 745.00 (ex. VAT) 1 in stock

Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator Lab

ITEM-29757

This Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. It will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item has 4 shelves.

Internal dimensions are L49cm x W48cm x H66cm.

£ 745.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator Lab

ITEM-29766

This Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator was removed from a university lab where ti was surplus to requirements.

The unit powers up and is in good working order but will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item is supplied with 4 shelves.

Internal dimensions are L45cm x W45cm x H66cm.

£ 715.00 (ex. VAT) 1 in stock

LTE Scientific IP100-U Laboratory Incubator Lab

ITEM-36518

LTE Scientific IP100-U Laboratory Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in reasonably good cosmetic condition with minor marks. (Digital thermometer not included).

SPARES/REPAIR ITEM

£ 710.00 (ex. VAT) 1 in stock

Thermo Scientific Max Q 4000 Shaking Incubator Lab Spares/Repairs

ITEM-30287

This Thermo Scientific Max Q 4000 Shaking Incubator was removed from a university lab where it was surplus to requirements.

The unit would not power up in testing. We swapped the boards out but still could get it to power. There were loose parts inside, so we assume it has been stripped. It has a very worn drive section.

It's in reasonable cosmetic condition with some marks from use.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Sanyo MIR-553 Incubator Lab Spares/Repairs

ITEM-36207

Sanyo MIR-553 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but the power relay is short circuited so it runs overtemp.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Thermo Scientific HERACELL 150i C02 Incubator Lab Spares/Repairs

ITEM-39995

This was removed form a university lab where it was surplus to requirements.

The unit powers up but the backlight in the screen has failed making it impossible to see the screen to set temps etc.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Infors Minitron Shaking Incubator Model AI 72 Lab Spares/Repairs

ITEM-44641

Infors Shaking Incubator Model-AI 72 Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition, but the door does not remain shut. The unit powers on, however, when setting the desired temperature, it remains at ambient temperature and does not raise to lower.

Therefore, it is listed as Spares/Repair.

£ 700.00 (ex. VAT) 1 in stock

Heraeus B-6200 Incubator Lab

ITEM-44854

Heraeus B-6200 Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition, with some damage present (as shown in slide).

£ 675.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus Lab

ITEM-29748

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus

This was removed from a university lab where it was surplus to requirements.

The unit powers up and both the incubation and CO2 function have been tested. It is in good working order (Temp & CO2 sensor not included).

It is in reasonable cosmetic condition but has seen some heavy use on the inside. It is purely cosmetic though.

SPARES/REPAIR ITEM

£ 620.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 4000 Analog Incubator Shaker SHKA4000-1CE Faulty

ITEM-37029

Thermo Scientific MaxQ 4000 Analog Incubator Shaker

This was removed from a university lab where it was surplus to requirements.

The unit would not power up and tripped the electrics during testing. We believe the motor controller is faulty. The gas struts for the lid have also failed.

It is in otherwise good cosmetic condition with marks from use.

£ 600.00 (ex. VAT) 1 in stock

Sanyo CO2 Laboratory Incubator MCO-17AIC IR Lab

ITEM-29769

This Sanyo CO2 Laboratory Incubator MCO-17AIC was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order, but will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use. The handle has come off, but this does not affect the operation of the unit.

Item is supplied with 4 shelves.

Internal dimensions are: L45cm x W45cm x H66cm.

SPARES/REPAIR ITEM

£ 600.00 (ex. VAT) 1 in stock

Sanyo MIR-253 Cooling Laboratory Incubator Lab

ITEM-39066

Sanyo MIR-253 Cooling Laboratory Incubator

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably poor cosmetic condition with noticeable damage.

Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 600.00 (ex. VAT) 1 in stock

Sanyo Versatile Environmental Test Chamber Model - MLR-351H Lab Humidity Fault

ITEM-28096

This Sanyo Versatile Environmental Test Chamber Model - MLR-351H was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer(not included). The water tank for humidity operation is missing from this unit, therefore it is listed as Spares/Repair.

The temperature was first set to 37˚c, when reached, the thermometer read 38.8˚c

The temperature was then set to the maximum temp of 50˚c, when reached, the thermometer read 52.2˚c

Finally, the temperature was set to the minimum of 0˚c, when dropped to, the thermometer read 3.1˚c.

Inside dimensions - D47 W50 H123cm

1 Shelf - 41 x 49cm

It is in reasonably good cosmetic condition with marks from use.

SPARES/REPAIR ITEM

£ 575.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova 4230 Refrigerated Incubator Shaker Spares/Repair

ITEM-36992

New Brunswick Scientific Innova 4230 Refrigerated Incubator Shaker Spares/Repair

This was removed from a university lab where it was surplus to requirements.

The unit powers but requires a replacement compressor and recharge as well as a new drive belt.

It is sold for spares/repairs.

Incubators and Growth Chambers

Filters