General Laboratory
Items 501 to 550 of 991
£ 900.00 (ex. VAT) 1 in stock
Huber 2 Litre Water Bath w/ Polystat CC3 Thermostat Lab
ITEM-44705
Huber 2 Litre Water Bath w/ Polystat CC3 Thermostat Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
£ 900.00 (ex. VAT) 1 in stock
Tecan Genesis RSP 100/4 Genesis Liquid Handling System w/ 2200 x 1000ul Tips Lab
ITEM-37708
This Tecan Genesis RSP 100 Liquid Handling System with 2200 new 1000ul Tips was removed from a university lab where it was surplus to requirements.
The item powers on and is in good cosmetic condition, we cannot test it further at our facility as it requires connection to a PC with relevant software installed.
Includes the following:
1 x case of 96 Tecan Series Disposable Tips order No. 612 512.1
1 x Gemini Software Manual V3.10
1 x Tecan EVOware Training handbook
1 x Gemini Software Training Course booklet
1 x Genesis RSP Operating Manual
1 x Genesis Instruments Setup and Service Manual V4.1
£ 900.00 (ex. VAT) 1 in stock
Carbolite CWF 1100 BenchTop Furnace
ITEM-46400
Carbolite CWF 1100 BenchTop Furnace
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
£ 900.00 (ex. VAT) 1 in stock
Labcaire Model - BH12 Class II Biological Safety Cabinet
ITEM-41421
This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab where it was surplus to requirements.
The unit powers up, and both the fans and the white lights are functioning. There is no UV light installed, and the socket tester is not included.
It is in reasonably good cosmetic condition internally and externally.
Inside dimensions - D63 W120 H70cm
Hours - 1078 1.2
£ 900.00 (ex. VAT) 1 in stock
Beckman JS 4.2 Series 4200RPM Swinging Bucket Rotor
ITEM-35614
Beckman JS 4.2 Series 4200RPM Swinging Bucket Rotor
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has not been tested.
Maximum capacity- 6x1000ml
Max RPM- 4200
Includes:
X18 Beckman 4x50ml tube slots (345371)
X14 Beckman 14x15ml tube slots (339180)
X3 1000ml buckets 1066g (368575)
X3 1000ml buckets 1067g (368575)
Model number- JS-4.2
Serial number- 07U2791
£ 895.00 (ex. VAT) 1 in stock
Wheaton 2-Tier Modular Roller Apparatus Cat No 348970CE Lab
ITEM-38695
Wheaton Modular Roller Apparatus Cat No 348970CE
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order. The speed adjustment knob is missing, but still works.
Item has 2 tiers & 12 rollers.
Roller Area x 2: 52cm x 67cm.
£ 880.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek 2000 Laboratory Automation Workstation Lab
ITEM-36280
Beckman Coulter Biomek 2000 Laboratory Automation Workstation Lab
This was removed from a university lab where it was surplus to requirements.
The unit powers up but was not tested further as there is no software with it.
It is in good cosmetic condition with minor marks.
Included with it are;
1x PC connection cable
1x Spare mounting plate
1x Bioworks opertating system manual
1x Bioworks version 1.4 release notes
1x Biomek 2000 user manual
1x Biomek 2000 quick start guide
1x Biomek 2000 installation and maintenance guide
1x Beckman plus tutorial
£ 860.00 (ex. VAT) 1 in stock
PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath Lab
ITEM-28204
PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath
This was removed from a university lab where it was surplus to requirements.
The unit powers up and the heating is in good working order.
Inside tank dimensions - L59 W31 H37cm
It is in good cosmetic condition with some marks from use.
£ 855.00 (ex. VAT) 1 in stock
PSL Rheotek TCB 8 Temperature Controlled Water Viscometer Bath Lab
ITEM-28205
PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath
This was removed from a university lab where it was surplus to requirements.
The unit powers up and the heating is in good working order.
Inside tank dimensions - L59 W31 H37cm
It is in good cosmetic condition with some marks from use.
£ 850.00 (ex. VAT) 1 in stock
10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights Lab
ITEM-35645
10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights
These were removed from a university lab where they were surplus to requirements.
Each item powers on and is in good working order. They are all in good cosmetic condition with minor marks.
Includes:
10 x Ohaus 200g weights
10 x power supplies
4 x manuals
These scales also have the option to be operated with AA batteries
Max 300g
Model number- TA301
£ 850.00 (ex. VAT) 1 in stock
AARIAC Clean Air CLR 20/30 S T UK Compressor Lab
ITEM-41804
AARIAC Clean Air CLR 20/30 S T UK Compressor Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit had been newly installed in late 2023, so has not seen heavy use.
Also included is the following:
Nardi Compressor - Dryer 400
Installed/Replaced - 23/11/23
£ 850.00 (ex. VAT) 1 in stock
VWR Micro Star 17 Micro Centrifuge Lab
ITEM-43040
VWR Micro Star 17 Micro Centrifuge
This item was removed from a facility where it was surplus to requirement.
It is in very good cosmetic condition and in good working order.
Includes;
Thermo Scientific Ch.500054PP Rotor
- Max RPM - 14800
- Max - 24x 4g
£ 850.00 (ex. VAT) 1 in stock
Beckman Coulter SX4250 Swinging Bucket Rotor 4500RPM w/ 4 Buckets Lab
ITEM-47197
Beckman Coulter SX4250 Swinging Bucket Rotor 4500RPM Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition but is untested.
Includes:
- 4 x Beckman Coulter 392252 SX4250 Centrifuge Rotor Buckets 250mL 4500RPM
- Max RPM- 4500
£ 840.00 (ex. VAT) 1 in stock
AARIAC Model Clean Air CLR 20/30 S T UK Lab
ITEM-41805
AARIAC Clean Air CLR 20/30 S T UK Compressor Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit was installed in late 2023 and had not seen much use.
Also included is the following:
Nardi Compressor - Dryer 400
Installed/Replaced - 23/11/23
£ 840.00 (ex. VAT) 1 in stock
Metrohm 702 SM Titrino & 703 Ti w/ Metrodata A.701.0009 Software & Dongle Lab
ITEM-35288
Metrohm 702 SM Titrino & 703 Ti w/ Metrodata A.701.0009 Software & Dongle
This was removed from a university lab where it was surplus to requirements.
Included are;
702 SM Titrino with remote.
The unit powers on and performs self-check.
703 Ti Stand
We were unable to locate the PSU for this unit. It was not supplied to us, so it is untested.
Metrodata software disc (A.701.0009) and accompanying dongle (6.2145.050).
£ 840.00 (ex. VAT) 1 in stock
Sanyo MCO-15AC Lab Incubator Co2 Lab
ITEM-42716
Sanyo MCO-15AC Lab Incubator CO2 Lab
This item was removed from a university lab where it was surplus to requirement.
It powers on and is in complete working order.
Item supplied with three shelves.
It is in good cosmetic condition, however the door handle has been removed, the latch and seal remain in good working order.
£ 830.00 (ex. VAT) 1 in stock
GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks Lab
ITEM-25464
This GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks was removed from a university lab where it was surplus to requirements.
The unit is in reasonable cosmetic condition with some marks from use. It has not been tested.
There are 6 Racks inside with drawers that hold 5ml tubes.
£ 830.00 (ex. VAT) 1 in stock
AARIAC Clean Air Type CLR 20/30 S T UK Lab
ITEM-41806
AARIAC Clean Air CLR 20/30 S T UK Compressor Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit was installed in late 2023 and had not seen much use.
Also included is the following:
Nardi Compressor - Dryer 400
Installed/Replaced - 23/11/23
£ POA 1 in stock
Parker Balston Lab Gas Generator Model 74-5041-220
ITEM-35061
This item is new in stock. Please enquire for further details.
£ 805.00 (ex. VAT) 1 in stock
ALC Multispeed Refrigerated Centrifuge PK 121 R + T515 4300rpm Rotor Lab
ITEM-16480
This ALC Multispeed Refrigerated Centrifuge PK 121 R was removed from a university lab where it was surplus to requirements.
The unit is in reasonable cosmetic condition but has been previously used. The start button is damaged but still works.
The unit powers on and has been tested. It spins up to 4100rpm, but the rotor is rated at 4300rpm. When set to its lowest which is -10 degrees it got down as low as -12. When set to its max which is 40 degrees it displayed 39 and was at 37.
The Rotor number displayed T515.
The Buckets Serial number is 0306/01.
The buckets Cat Number is 11210335.
The number on the bottom of the buckets is Ch. 007027 S.303.
The bucket adaptors inside the buckets were numbered ALC R2035 & the Cat Number is 11172435.
The ALC 2035 Adapter is for 50ml tubes.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 800.00 (ex. VAT) 1 in stock
Thermo Scientific Sorvall Discovery M120 SE Centrifuge Spares/Repairs
ITEM-35813
This was removed from a university lab where it was surplus to requirements
THe unit powers up but shows error 48 which is a door lock error. It seems like the door solenoid is not being sent a signal.
It is sold for spares/repairs.
No rotor included.
£ 800.00 (ex. VAT) 1 in stock
Nuaire Laboratory CO2 Incubator Model NU-5500E Lab
ITEM-46363
Nuaire Laboratory Incubator Model NU-5500E Lab
This item was removed from a university lab where it was surplus to requirement.
The unit powers up and is in good working order.
It is in good cosmetic condition.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 800.00 (ex. VAT) 1 in stock
Julabo Recirculating Chiller Model: FLW1703GB Lab Spares/Repairs
ITEM-20313
This Julabo FL 1703 Recirculating Chiller Model: FL1703GB was removed from a university lab where it was surplus to requirements.
The item is in reasonable cosmetic condition. It has scratches and stains along its surface.
The unit powers up but requires a replacement compressor.
It is in good cosmetic condition with minor marks.
It is sold for spares/repairs.
£ 800.00 (ex. VAT) 1 in stock
Oxford Cryo Systems Crystal Diffractometer Cryostream Probe Lab
ITEM-46195
Oxford Cry Systems Crystal Diffractometer Cryostream Probe
This item was removed from a university laboratory where it was surplus to requirements.
It is in good cosmetic condition. It was not possible to test the functionality at our facility.
Includes:
- Single crystal diffractometer cryostream probe
£ 800.00 (ex. VAT) 1 in stock
New Brunswick Scientific U410-45 Ultra Low Temperature Freezer Lab
ITEM-41392
New Brunswick Scientific U410-45 Ultra Low Temperature Freezer Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and good working order, it has been tested to its minimum temperature of -45ºc with our external thermometer reading -43.3ºc. (Not included).
This item features:
4 x shelves (55x55cm)
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 800.00 (ex. VAT) 1 in stock
Infors AEROTRON Shaker Incubator Lab Spares/Repairs
ITEM-39841
Infors AEROTRON Shaker Incubator
This was removed from a university lab where it was surplus to requirements.
The unit does not power up. It is sold for spares/repairs.
We think this unit would make for a great movie prop.
£ 800.00 (ex. VAT) 1 in stock
Illumina High-Speed Microplate Shaker Lab
ITEM-45049
Illumina High-Speed Microplate Shaker
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition.
RPM:
- Tested at 600 RPM (lowest)
- Tested at 1000 RPM
- Tested at 2500 RPM (maximum)
£ 800.00 (ex. VAT) 1 in stock
Beckman GS-6KR Centrifuge with PTS-2000 Rotor Lab
ITEM-37244
Beckman GS-6KR Centrifuge
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and working order.
During tested, the item reached a maximum temperature of 32ºc, but successfully chilled to a minimum of -10ºc. It was tested at the rotors top speed of: 3250 RPM.
Includes:-
- Beckman PTS-2000 Swinging Bucket Rotor Centrifuge
- 4 x Buckets, the cover for one of the baskets is not included.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 800.00 (ex. VAT) 1 in stock
Bright OTF 5000 Cryostat Microtome 5040 Lab Spares/Repairs
ITEM-42297
Bright OTF 5000 Cryostat Microtome 5040
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition.
The internal light powers on, and the manual rotary operation handle moves the specimen holder up and down smoothly.
However, despite the compressor running, the probe temperatures did not drop from ambient after three hours of operation.
Therefore, it is listed as Spares/Repair.
Includes:
- 1 x Operation Manual
- 3 x specimen platters for the quick freeze block
- 2 x stainless inner plates
£ 800.00 (ex. VAT) 1 in stock
ElectroThermal Wax Dispenser MH8523B Lab
ITEM-45517
ElectroThermal Wax Dispenser MH8523B
This item was removed from a university laboratory where it was surplus to requirements.
The unit powers up and is in good working order (thermometer not included).
It is in good cosmetic condition other than wax covering much of the exterior, including the handle.
£ 800.00 (ex. VAT) 1 in stock
Beckman Coulter Centrifuge Rotor Type 50.2 Ti Lab
ITEM-41839
Beckman Coulter Rotor Type 50.2 Ti
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.
Features:
- Type - 50.2 Ti
- Max RPM - 50,000
- The Unit Has 12 x Slots For Vials
- Only Use in Instruments Classified H, R, S
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 800.00 (ex. VAT) 1 in stock
Hitachi Sorvall Discovery M120 Refrigerated S/R Broken Motor Mount Lab
ITEM-47196
Sorvall Discovery M120 Floor-Standing Refrigerated Centrifuge Spares/Repair Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and powers on, however, further testing was not possible due to the motor mount being broken.
Therefore, it is listed as Spares/Repair.
£ 760.00 (ex. VAT) 1 in stock
Heraeus Labofuge 400 Function Line Benchtop Centrifuge 3500rpm Max Lab
ITEM-36950
Heraeus Labofuge 400 Function Line Benchtop Centrifuge
This was removed from a university lab where it was surplus to requirements.
The unit powers up and runs smoothly up to 3500rpm.
It is in reasonable cosmetic condition with light marks and rusting.
Heraeus Rotor #8179
4 x Buckets #8172 Ch.003515
£ 750.00 (ex. VAT) 1 in stock
Eppendorf 5402 Refrigerated Centrifuge w/ Eppendorf F-45-18-11 Rotor Lab
ITEM-46193
Eppendorf 5402 Refrigerated Bench-top Centrifuge
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good working order, however the display screen backlight is slightly dim.
Includes;
- Eppendorf F-45-18-11 fixed angle rotor
- Capacity: 18 x 1.5/2.0mL
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Sorvall RC-5C+ Plus Floorstanding Centrifuge Lab Spares/Repairs
ITEM-41038
This Sorvall RC-5C Plus Floor-Standing Centrifuge was removed from a university lab where it was surplus to requirements.
The unit powers up, but shortly after running it produces error code 7 preventing it from being tested, therefore this item is sold as Spares or Repairs.
Error 7 = REFRIGERATION SYSTEM FAILURE There was no apparent drop in chamber temperature thirty seconds after the refrigeration system started to cool. Notify your Thermo Field Service Engineer.
£ 750.00 (ex. VAT) 1 in stock
Eppendorf Model A-2-DWP Rotor 3,700 rpm 2 x Buckets Lab
ITEM-46921
Eppendorf A-2-DWP Rotor
This item was removed from a university laboratory where it was surplus to requirements.
It is in good cosmetic condition. It was unable to be tested further.
Includes:
- 2 x Swinging Buckets
Specifications:
- Maximum speed: 3,700 rpm
- Maximum RCF: 2,250 × g
- Capacity: Accommodates up to two deepwell plates, microtiter plates, cell culture plates, or filtration plate kits
- Compatible with Eppendorf Centrifuge models 5804, 5804 R, 5810, and 5810 R
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Beckman Optima LE-80K Centrifuge Spares/Repair Lab
ITEM-46445
Beckman Optima LE-80K Centrifuge Spares/Repair
This item was removed from a university laboratory where it was surplus to requirements.
It powers on, but encounters issues when attempting to reach set speeds; the machine beeps and displays messages about microns and speed, then slows down.
Therefore, it is listed as Spares/Repair.
£ 750.00 (ex. VAT) 1 in stock
Ealing Optical Isolation Tabletop Breadboard 149x120x25cm on Bench 156x92x72m
ITEM-42418
Ealing Optical Isolation Tabletop Breadboard on Lab Bench
This item was removed from a university laboratory where it was surplus to requirements.
The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.
It is in good cosmetic condition.
Table Specifications:
- Size: 149 x 120 x 25 cm (Length x Width x Height)
- Thread Size: Imperial UNF 1/4" - 28
- Matrix: 2" square, featuring a grid of 29 x 23 holes
Lab Bench Specifications:
- Size: 156 x 92 x 72 cm (Length x Width x Height)
- Material: Tubular steel frame with a wooden tabletop
£ 750.00 (ex. VAT) 1 in stock
Ealing Optical Isolation Tabletop Breadboard 154x120x25cm on Bench 156x92x72m
ITEM-42459
Ealing Optical Isolation Tabletop Breadboard on Lab Bench
This item was removed from a university laboratory where it was surplus to requirements.
The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.
It is in good cosmetic condition.
Table Specifications:
- Size: 154 x 120 x 25 cm (Length x Width x Height)
- Thread Size: Imperial UNF 1/4" - 28
- Matrix: 2" square, featuring a grid of 29 x 23 holes
Lab Bench Specifications:
- Size: 156 x 92 x 72 cm (Length x Width x Height)
- Material: Tubular steel frame with a wooden tabletop
£ 750.00 (ex. VAT) 1 in stock
Job Lot of 8 Helmsman Dispenser Red/Grey 20 Door Pigeon Hole Post Cabinets Lab
ITEM-38696
Job Lot of 8 Helmsman Dispenser Red/Grey 20 Door Cabinets
This job lot of items comes from a university lab, The items were no longer required.
Individual exterior dimensions: L45cm x W38cm x H 182cm. 35Kg.
Individual interior dimensions of each compartment: L43cm W32cm x H8cm.
Item is supplied with 1 Main door opening Key, which opens all cabinets, and an additional 113 Keys for individual cabinets.
Doors with keys have been tested & working.
£ 750.00 (ex. VAT) 1 in stock
Job Lot of 18 Electro Nickel Clifton 1026E Boiling Baths with ER1 Regulators
ITEM-37620
Job Lot of 18 Electro Nickel Clifton 1026E Boiling Baths with ER1 Regulators
These were removed form a university lab where they were surplus to requirements.
The units are all in good working order.
£ 750.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek 2000 Laboratory Automation Workstation
ITEM-35153
This Beckman Coulter Biomek 2000 Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.
The item powers on but is unable to be tested further without software.
The item is in a reasonable, used cosmetic condition with marks and scuffs.
It comes with a sealed box of Beckman P 20 Pipette Tips (20ul)
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
New Brunswick Innova 44R Refrigerated Shaking Incubator Lab Spares/Repairs
ITEM-45166
New Brunswick Innova 44R Incubator Broken Shaker Lab
This item was removed from a university lab where it was surplus to requirements.
The incubator is in reasonable good used cosmetic condition, with some rust around the edges of the lower base.
The unit powers on and was successfully temperature tested. However, it has a faulty shaker motor and stuck bolts on the shaker plate, which require significant work for repair, but is entirely possible for someone to do.
Due to the faulty shaker element, this item is listed as Spares/Repair.
Specifications:
- Model: Innova 44R
- Condition: Fair, requires repair for shaker motor
- Functionality: Incubation temperatures tested and reached correctly
£ 750.00 (ex. VAT) 1 in stock
Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810
ITEM-37249
Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810
This item was removed from a university where it was surplus to requirement.
It is in good, used cosmetic condition.
Specifications:
- Type: 2-in-1 Fixed Angle and Swinging Bucket Rotor
- Max RCF: 3,114 x g (Fixed Angle), 3,490 x g (Swinging Bucket)
- Radius: 116/37 mm Fixed Angle, 130/42 mm Swinging Bucket
- Angle: 45° Fixed, 12 to 87° Swinging Bucket
- Capacity: 8 x 15 mL (Fixed Angle), 8 x 10 mL (Swinging Bucket)
- Max Speed: 300 to 4,900 rpm, adjustable in increments of 100 rpm
£ 750.00 (ex. VAT) 1 in stock
Stuart SI60 Clear Chamber Forced Air Incubator, 60 L Lab
ITEM-44775
Stuart SI60 Clear Chamber Forced Air Incubator, 60 L Lab
This item was removed from a university lab where it was surplus to requirement.
It is in reasonably good cosmetic condition and in good working order.
Specifications:
- Model: SI60
- Serial#: R000100205
£ 750.00 (ex. VAT) 1 in stock
Beckman Coulter BioMek NXp Laboratory Automation System Lab
ITEM-41419
Beckman Coulter BioMek NXp Laboratory Automation System Lab
This system was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers up.
The system includes the following:
- Software
- PC and monitor
- Manual
- 40 x boxes of 10 racks of P20 pipette tips
- 8 boxes of 10 racks of P250 pipette tips
- 1 x Biomek valve Unit
- 1 x Inheco TEC Control 96/RS232
- 1 x Biomek Modular Reservoir Quarter Module 40mL Capacity (48 reservoirs)
- 1 x Biomek Modular Reservoir Half Module 75mL Capacity (24 reservoirs)
- Box of tubing
- Box of spare parts and accessories
- 1 x light curtain test rod
£ 750.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek NXp Laboratory Automation Workstation Cat no. A31840 Lab
ITEM-20385
This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.
Everything powers up and the system is in good cosmetic condition with some marks from use.
There appears to be an issue with at least one of the injectors. When we attempt to 'home' the robot head it will start to home the various parts, then stall and with an error code
'error homing: Y2 Axis error: Motion error; the axis was unable to perform the specified move. (0100)
We believe the issue is with the #2 injector side-to-side motor. The up-and-down motor appears to run well.
This error makes it impossible to home the system. So it could not be tested any further.
The system comprises of;
1 x Beckman Coulter Biomek NXp Laboratory Automation Workstation
Cat no. A31840
Unit dimensions - W77 L92 H98cm
1 x IBM ThinkCentre PC
MT-M 8113-DA1
Biomek Software Version 3.3 installed.
1 x Lenovo Monitor
Type - 9227-AC1
1 x Lenovo Keyboard
1 x IBM Mouse
2 x Nalgene 2 Gallon Waste/Supply Bottles
Box of Accessories:-
Beckman Coulter AccuFrame
Beckman Coulter Vacuum Valve Unit
Power Adaptor
Various cables
8 x 2ml Tube holders (24 tube slots in each)
94 x 2ml tubes
Vacuum Manifold Base
23mm Spacer Collar PN 719751
36mm Collar
3 x Thermo Scientific 96 well 0.2ml plates.
£ 750.00 (ex. VAT) 1 in stock
Thermo Scientific Matrix Hydra II Automated Liquid Handling System Lab
ITEM-23391
This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a university lab where it was surplus to requirements.
The system is in good cosmetic condition with marks from use. All modules power up.
We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes.
The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working.
The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal.
We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts.
The system is made up of the following;
1 x Matrix Hydra II
Cat no. 109610
1 x Matrix 2 Position Stage
1 x Apogent Discoveries Matix Hydro Pump Module
The unit powers on with all 3 Fills working.
1 x Matrix P1 Control Box
1 x Innovadyne 1-Channel Nanofill
The unit powers up.
1 x Grant Instruments Type MS1
The unit powers up.
Dell Laptop with Microsoft Mouse
Model - PP04X
Hydra II-Plus-One Control Software Version 3.1.3 Installed
The unit powers up and the software runs.
Software Discs:
Matrix Hydra II-Plus-One Control Software Version 3.1.3
Matrix Hydra II-Plus-One Control Software Version 3.1.2
SuperLogics LE Software Suite Rev 2.9
2 x Socket Installation discs
Various tubing and accessories
Operating instructions
£ 750.00 (ex. VAT) 1 in stock
Sanyo MCO-18AIC UV Co2 Incubator Lab
ITEM-42720
Sanyo MCO-18AIC(UV) Co2 Incubator Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order.
It is in very good cosmetic condition.
£ 750.00 (ex. VAT) 1 in stock
Audion AudionVac Digital VMS 133 Vacuum Sealing Machine
ITEM-47135
Audion AudionVac Digital VMS 133 Vacuum Sealing Machine
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and in working order.
Includes;
- User Manual
- 3 x Marble Platform
Items 501 to 550 of 991