General Laboratory

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heraeus Megafuge 40R Laboratory Centrifuge Lab Spares/Repair

ITEM-47421

Thermo Scientific Megafuge 40R Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge displays an E33 error, indicating a fault with the main board. The working condition of the remaining parts is unknown:

2 x Lid locks (at least one reported to have an issue)
1 x Motor
1 x Compressor
1 x Display board
1 x Temperature sensor

Due to the issues stated above, this centrifuge is listed as Spares/Repair.

Please note: There is no rotor included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Julabo FL300 Recirculating Chiller - Spares/Repair Lab

ITEM-47581

Julabo FL300 Recirculating Chiller – Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit shows minimal wear, with both of the top catches on the lid broken; this does not affect physical operation of the doors.

The cable is damaged, and the unit will not power on, so it is being sold for spares or repair.

Model: FL300

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Parker Dominick Hunter LCMS30-1 Nitrogen Gas Generator Spares/Repair

ITEM-47640

Parker Dominick Hunter LCMS30-1 Nitrogen Gas Generator Spares/Repair

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, the display screen does not power on.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Hermle Z 300 K Centrifuge - Spares/Repair Lab

ITEM-47684

Hermle Z 300 K Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and shows minimal wear.

However, during testing it failed to reach the set temperature, stabilizing at 25°C, and did not achieve the rotor’s maximum speed of 5000 RPM, reaching only 4000 RPM.

Therefore, it is listed as spares/repair.

Model: Z 300 K

Serial No.: 55060105

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf Centrifuge 5810 R w/ Eppendorf A-4-81 Rotor Spares/Repair Lab

ITEM-47794

Eppendorf 5810 R Refrigerated Centrifuge - Spares or Repair

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition but does not power on, likely due to a suspected motherboard fault. Therefore, it is being sold as Spares or Repair.

Includes:

4 x Swinging Buckets (Eppendorf 09/04 – Max Load 780g)
8 x Sample Holders (5-hole, 3cm diameter)
4 x Sample Holders (1-hole, 6cm diameter)
1 x Sample Holder (12-hole, 2cm diameter)

£ 500.00 (ex. VAT) 1 in stock

Millipore Direct-Q 3 UV Benchtop Water Purifier Lab

ITEM-48344

Millipore Direct-Q 3 UV Benchtop Water Purifier Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The lab confirmed it was in good working order prior to removal.

Please note; The Cartridges and Filters require replacement as the current ones have expired.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Spectrum Labs KrosFlo TFF System KR2i Peristaltic Pump Spares/Repair Lab

ITEM-48347

Spectrum Labs KrosFlo TFF System KR2i Peristaltic Pump – Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on; however, the previous owner has stated it is faulty, with the fault unspecified. Supplied with cables for connecting to the rest of a system, along with an Automatic Backpressure Valve (PN-900-13702-000).

Includes:

Cables for system connection
Automatic Backpressure Valve (PN-900-13702-000)

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter SW 41 TI 41,000 RPM Swinging Bucket Rotor Lab

ITEM-48416

Beckman Coulter SW 41 TI 41,000 RPM Swinging Bucket Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Specifications;

Rotor Type Ultra – Swinging Bucket
Maximum Speed 41,000 rpm
Maximum RCF at r max (g) 288,000 x g
k-Factor 124
Rotor Material Titanium
Bucket Material Titanium, Anodized Aluminum Cap

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter SW 40 TI 40,000 RPM Swinging Bucket Rotor Lab

ITEM-48418

Beckman Coulter SW 40 TI 40,000 RPM Swinging Bucket Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Specifications;

Platform: Floor Prep
Rotor Type: Swinging-Bucket (Ultracentrifugation)
Maximum RPM: 40,000 rpm
Max g-Force: 285,000.00
k-Factor: 137
Number of Tubes: 6×14 mL / 14×95 mm(6×14 mL / 1×4 in)

£ 500.00 (ex. VAT) 1 in stock

MSE Mistral 2L Floor Standing Centrifuge w/ Rotor Lab

ITEM-48544

MSE Mistral 2L Floor Standing Centrifuge w/ Swing-Out Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Genevac HT-8 Series II Centrifugal Evaporation System Accessories Spares/Repair

ITEM-48655

Genevac HT-8 Series II Centrifugal Evaporation System Accessories Spares/Repair

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but does not power on.

Therefore, it is listed as Spares/Repair.

Box of Accessories includes:

Tube racks / sample holders: 5 unwrapped, 11 wrapped in bubble wrap, 6 in the centrifuge, and 2 in the centrifuge from an HT I Series.
Rotor buckets: 23 in total, assorted sizes and shapes.
Lamps: 5 unboxed and 3 packaged Xenophot 64695 HLX bulbs.
Cables and tubing: Vacuum hose and electrical connection cables for the HT-8 system (connects to condenser and vacuum pump).
Spare parts: O-rings, gaskets, and seals in labelled bags.
Software & accessories: Control/driver CD and clear acrylic protective plates.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Statebourne Cryogenics Liquid Nitrogen Refrigerator BM12 Faulty Lab

ITEM-48690

Statebourne Cryogenics Liquid Nitrogen Refrigerator BM12 S/R Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on but the lid does not close properly. The previous owner has stated that the unit is not working.

Due to these issues, it is listed for spares or repairs.

Model: BM12 S/R

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-20 XP Floor Standing Centrifuge Spares/Repair Lab

ITEM-49365

Beckman Coulter Avanti J-20 XP Floor Standing Centrifuge Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition but fails to powers on, it is therefore listed as Spares/Repair

Please note; There is no rotor included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Heto Drywinner CT/DW110 Freeze Dryer Spares/Repair Lab

ITEM-49380

Heto Drywinner CT/DW110 Freeze Dryer Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, it failed to cool.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Lec Medical LSR288UK Fridge Refrigerator Lab

ITEM-49474

Lec Medical LSR288UK Laboratory Fridge

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 500.00 (ex. VAT) 1 in stock

BioCOLD BIO360FRSS Laboratory Refrigerator

ITEM-49475

BioCOLD BIO360FRSS Laboratory Refrigerator

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

Please note; The temperature dial is missing, but it can still be operated with the pin.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf 5804 R Centrifuge w/ A-4-62 Rotor Spares/Repair Lab

ITEM-49742

Eppendorf 5804 R Centrifuge w/ A-4-62 Rotor Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing the following error was present; Error 17, a PCB fault.

Which prevented any further testing.

It is therefore listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Infors HT Minitron Co2 Shaking Incubator 2017 - Working - Broken Door Lab

ITEM-47442

Infors HT Minitron CO₂ Shaking Incubator 2017 – Spares/Repair

This item was removed from a facility where it was surplus to requirements.

It is in very good cosmetic condition, although the outer door panel with the onboard controls is missing. The unit was tested and found to be in complete working order, but a replacement door is required before safe operation.

Therefore, it is listed as Spares/Repair.

A new door can be purchased directly from Infors.

Model: HT Minitron

Year: 2017

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Infors Multitron HT Triple Stack Incubator Spares/Repairs

ITEM-45163

Infors Multitron HT Triple Stack Incubator

This incubator system was removed from a university laboratory where it was surplus to requirements.

The units are in good used cosmetic condition with signs of general use. It has several operational issues affecting its performance:

Top Unit:

Cooling system and blower heater are faulty.
Temperature settings are inaccurate:
Set to 1.0ºC, read 9.8ºC.
Set to 37ºC, initially correct but now fails to heat.
Set to 65ºC (Max), unable to maintain temperature; reads as faulty.
Shaker speed sensor is faulty, limiting operation to a maximum of 400rpm.

Middle Unit:

The unit powers up and was successfully temperature tested, displaying accurate readings when set to 37ºc & 65ºc (MAX).
Shaker speed sensor issues cause erratic operation without displaying current speed.

Bottom Unit:

The unit powers up and was successfully temperature tested, displaying accurate readings when set to 37ºc & 65ºc (MAX).
Shaker functions up to 230rpm smoothly; above this, it becomes erratic and displays errors.

Given the multitude of issues, particularly with the cooling systems, heaters, and shaker speed sensors across all units, this triple stack incubator is listed for spares or repairs.

This setup may require significant repairs, or could be used for parts by those capable of addressing these extensive technical issues.

NEW ITEM

£ 500.00 (ex. VAT) 1 in stock

14 x Boxes Thermo Scientific Rack Side Access 1950520 Freezer Racking

ITEM-36911

14 x Boxes Thermo Scientific Rack Side Access 1950520 Freezer Racking

Code - 1950520

Dimensions - W5.5" x H10.9" x D26.5"

13 Boxes are sealed, one has been opened.

The units are new and unused.

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-175 CO2 Incubator Lab

ITEM-35162

Sanyo MCO-175 CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has been recertified. The CO2 and Heating features are working well.

This item is fixed with castors.

£ 490.00 (ex. VAT) 1 in stock

Grant SBB Aqua 12 Plus Water Bath Lab

ITEM-42220

Grant SBB Aqua 12 Plus Boiling Water Bath

This item was removed from a university laboratory where it was surplus to requirements.

The water bath is in good cosmetic condition, with some light wear below the waterline.

It powers up and is in good working order (thermometer not included).

Specifications.

Model: SBB Aqua 12 Plus
Serial No.: MJ1028005
Capacity: 12 litres
Features: Clear polycarbonate lid

£ 455.00 (ex. VAT) 1 in stock

BIOAIR Safeflow 2 Class 2 Biological Safety Cabinet Lab

ITEM-29789

This BIOAIR Safeflow 2 Class 2 Biological Safety Cabinet was removed from a university lab where it was surplus to requirements.

The unit powers up, but an Unsafe message appears on the screen. "Incorrect laminar flow & CPU alive." There is a black line through the screen. It may just need a service to rectify the issue, but we cannot guarantee this.

It is in good cosmetic condition with minor marks from use.

Internal dimensions are: L114cm x W40cm x H66cm.

£ 450.00 (ex. VAT) 1 in stock

GE HEalthcare Ready to Process Wave 25 Bioreactor System Pump & CBCU Unit

ITEM-31532

This was removed from a university lab where it was surplus to requirements.

The units have not been tested as we do not have the correct PSU.

The units are in good cosmetic condition with minor marks from use.

Included are;

1x GE Ready to Process CBCU unit

1x Ready to Process Pump 25 w/ Pumpheads

2x Pumpheads:

114DV OEM Pumpheads

•Prod No 113.5000.R33

•Ser no. 66056-3

£ 450.00 (ex. VAT) 1 in stock

Liquid Nitrogen Tank Dewar Trolley

ITEM-46992

Dual Liquid Nitrogen Tank Trolley

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.

£ 450.00 (ex. VAT) 1 in stock

Critical Point Dryer with Box

ITEM-47807

Critical Point Dryer with Box

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility.

£ 450.00 (ex. VAT) 1 in stock

Ondeo Pur1te Select Water Purification System Lab

ITEM-48565

Ondeo Pur1te Select Water Purification System Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, when powered on the display reads: 'Replace NCP Pack'.

We are unable to test it further at our facility.

£ 450.00 (ex. VAT) 1 in stock

Set of 4 x White Laboratory Storage Drawers Lab

ITEM-49582

Set of 4 x White Laboratory Storage Drawer Units

These drawer units were removed from a facility where they were surplus to requirements.

All four units are in decent overall cosmetic condition, showing light wear from previous use.

The set includes two mobile drawer units on wheels and two static drawer units without wheels, each with multiple internal storage drawers.

No further testing has been carried out.

Included

2 x Drawer units on wheels

External dimensions: 66.5 (L) × 48.5 (W) × 67 (H) cm
6 x Internal drawers per unit (approx. 60 (L) × 42.5 (W) × 5.5 (D) cm)

2 x Drawer units without wheels

External dimensions: 36.5 (L) × 58.5 (W) × 70.5 (H) cm
4 x Internal drawers per unit
Drawer 1–3: 53 (L) × 29.5 (W) × 5.5 (D) cm
Bottom drawer: 53 (L) × 29.5 (W) × 24 (D) cm (deeper storage)

£ 450.00 (ex. VAT) 1 in stock

Heraeus CO2 Incubator Type BB 6220 CUO2 Lab

ITEM-31143

Heraeus CO2 Incubator Type BB 6220 CUO2

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition externally and fairly poor cosmetic condition internally.

It has been recertified by en engineer with heating and CO2 functions tested,.

Specifications;

Model: BB 6220 CUO2
SN: 94109551
Internal dimensions: D56 W65 H66cm
6 Doors with 6 Shelves: 50 x 26cm

£ 450.00 (ex. VAT) 1 in stock

Thermo Scientific TX-1000 Swinging Bucket Rotor 4200rpm Lab

ITEM-48330

Thermo Scientific TX-1000 Swinging Bucket Rotor

This item was removed from a university lab where it was surplus to requirements.

It is in excellent cosmetic condition. No buckets are included with this rotor.

Specifications:

Max RPM: 4200
Model: TX-1000
Item Number: 75003017

The lab confirmed it was in working order prior to removal.

£ 450.00 (ex. VAT) 1 in stock

RDC Upright Display Cooler Model SS-P360FA Lab

ITEM-48414

RDC Upright Display Cooler Model SS-P360FA Lab

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition.

It powers on, is in good working order when temperature testing, however, the internal light does not function.

£ 450.00 (ex. VAT) 1 in stock

Torrey Pines Scientific Echotherm IC20 Chilling/Heating Plate Lab

ITEM-48459

Torrey Pines Scientific Echotherm IC20 Chilling/Heating Plate Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in reasonably good cosmetic condition.

The power supply is included.

£ 420.00 (ex. VAT) 1 in stock

GeneChip Model 450/400 Fluidics Station Lab

ITEM-45032

GeneChip Fluidics Station 450/400

This item was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition with all dispensers powering on.

The previous client has stated it was in working order prior to removal.

Further testing could not be completed due to the absence of required software.

£ 415.00 (ex. VAT) 1 in stock

GeneChip Fluidics Station Model 450/400 Lab

ITEM-45031

GeneChip Fluidics Station 450/400

This item was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition with all dispensers powering on.

The previous client has stated it was in working order prior to removal.

Further testing could not be completed due to the absence of required software.

£ 410.00 (ex. VAT) 1 in stock

Oxford Cryosystems Model 600 Series Cryostream Cooler Controller Lab

ITEM-39921

This Oxford Cryosystems 600 Series Cryostream Cooler Controller was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

£ 410.00 (ex. VAT) 1 in stock

GeneChip Fluidics Station Type 450 Lab

ITEM-45030

GeneChip Fluidics Station 450/400

This item was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition with all dispensers powering on.

The previous client has stated it was in working order prior to removal.

Further testing could not be completed due to the absence of required software.

£ 410.00 (ex. VAT) 1 in stock

Avidity Duo10 Water Purification System w/ 2 x TC004 POU & 1 x TC001 Lab

ITEM-47410

Avidity Duo10 Water Purification System w/ 2 x TC004 POU & 1 x TC001 Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on as it should and is in good used cosmetic condition. There are various marks from general use and some slight rusting at the rear, typical for water-based equipment.

The previous owner has stated it was in working order prior to removal.

Includes:

1 x PSU
2 x TC004 POU Endotoxin Filters (1 used, 1 sealed)
1 x TC001 Pre-Treatment Module (appears unused)

Run Hours:

TC001 hours: 743h
TC002 DI hours: 762h
TC003 UV lamp hours: 38,680h
TC009 UP (LH) hours: 2,270h

£ 400.00 (ex. VAT) 1 in stock

Texol Nitro Generator Model - NG1 T/S Lab Spares/Repairs

ITEM-24405

Texol Nitro Generator Model - NG1 T/S

This was removed from a university lab where it was surplus to requirements.

The unit does not power up and is sold for spares/repairs.

£ 400.00 (ex. VAT) 1 in stock

New Era Pump Systems Pump Model: 9000 Lab

ITEM-29846

This New Era Pump Systems Syringe Pump Model: 9000 was removed from a university lab where it was surplus to requirements.

The item is in good used condition.

The item powers on and appears to function correctly, but we were unable to test it further.

Flow rates range from a minimum of 0.041 mL/min (0.001386 oz/min) to a maximum of 904.4 mL/min (30.6 oz/min) with 3/16" id tubing.

£ 400.00 (ex. VAT) 1 in stock

Corsair Drying Cabinet Lx78 Wx34 Hx53 cm

ITEM-43114

Corsair Drying Cabinet Lx78 Wx34 Hx53 cm

This item was removed from a university where it was surplus to requirement.

It powers on and is in working order, stabilising at a maximum temperature of 75ºc.

It is in reasonably good cosmetic condition with some marks present.

£ 400.00 (ex. VAT) 1 in stock

LKB Bromma 2088 Ultrotome V Microtome System Lab

ITEM-45562

LKB Bromma 2088 Ultrotome V Microtome

This system was removed from a university laboratory where it was surplus to requirements.

The microtome is in reasonably good cosmetic condition, and its mechanism functions properly in both automatic and manual modes.

The focus lamp is operational, although the diffused light feature does not work. It is just a bulb that needs replacing.

This system comprises the following:

LKB Bromma 2088 Main Unit
LKB Bromma 2088 Microscope Stand
LKB Bromma 2088 Control Box

£ 400.00 (ex. VAT) 1 in stock

BIGNEAT F3-XIT BPXS03/01A Powder Weighing Station Safety Cabinet Lab

ITEM-34881

BIGNEAT F3-XIT BPXS03/01A Safety Cabinet Powder Weighing Station

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with marks from use.

£ 400.00 (ex. VAT) 1 in stock

Genlab Model SP/LCI/320/SS/DIG Lab Incubator

ITEM-38911

Genlab SP/LCI/320/SS/DIG Laboratory Incubator

This was removed from a working lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with minor marks

6 Baskets/Drawers - 51 x 50 x 15cm

£ 400.00 (ex. VAT) 1 in stock

Oxford Cryosystems 600 Series Cryostream Cooler Controller Lab

ITEM-39920

This Oxford Cryosystems 600 Series Cryostream Cooler Controller was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

£ 400.00 (ex. VAT) 1 in stock

Jouan EB115 EL TS SN Incubator Lab

ITEM-40921

Jouan EB115 EL TS SN Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a temperature probe (not included).

It is in good working order and cosmetic condition with minor surface damage present.

£ 400.00 (ex. VAT) 1 in stock

TripleRed Alto-UF-R Water Purification System Lab

ITEM-41696

TripleRed Alto-UF-R Water Purification System Lab

This system was removed from a university lab, where it was surplus to requirements.

Both devices power up and communicate, but we are unable to them further at our facility.

This system is in good overall cosmetic condition.

A password is required to operate the system, which is available on request.

£ 400.00 (ex. VAT) 1 in stock

Stuart See-Saw Rocker SSL4 Lab

ITEM-43038

Stuart See-Saw Rocker SSL4 Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 400.00 (ex. VAT) 1 in stock

ELGA PURELAB Ultra IO MK2 Water Purifier Purification System ULXXXIOM2 Lab

ITEM-44415

ELGA PURELAB Ultra IO MK2 Water Purifier Purification System

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, the previous client has stated it was in working order prior to removal.

Also included are the following:

2 x Elga LabPure S1 Cartridges

£ 400.00 (ex. VAT) 1 in stock

GeneChip Fluidics Station 450/400 Lab

ITEM-45028

GeneChip Fluidics Station 450/400

This item was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition with all dispensers powering on.

The previous client has stated it was in working order prior to removal.

Further testing could not be completed due to the absence of required software.

£ 400.00 (ex. VAT) 1 in stock

GenLab Incubator Model INC60F Lab

ITEM-46081

GenLab Incubator Model INC60F Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.