General Laboratory

£ 395.00 (ex. VAT) 1 in stock

Polaron Critical Point Dryer Lab

ITEM-37690

This Polaron Critical Point Dryer was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition other than a crack across the bottom of the right gauge.

It is untested due to not having the correct equipment at our facility, therefore, this item is sold as Spares or Repairs.

£ 395.00 (ex. VAT) 1 in stock

Avidity Type Alto Alto-UF-R Water Purification System Lab

ITEM-41698

Avidity Alto Water Purification System Lab

This system was removed from a university lab, where it was surplus to requirements.

Both devices power up and communicate, but we are unable to them further at our facility.

This system is in good overall cosmetic condition.

A password is required to operate the system, which is available on request.

£ 390.00 (ex. VAT) 1 in stock

Millipore Milli-Q Academic Water Purification System Cat no. ZMQS50001 Lab

ITEM-23361

Millipore Milli-Q Academic Water Purification System Cat no. ZMQS50001

This item was removed from a university lab where it was surplus to requirements.

The unit powers on with the water running, but it says that cartridges need changing. It was not tested further.

It is in reasonably good cosmetic condition, with some marks from use.

£ 375.00 (ex. VAT) 1 in stock

Eppendorf Centrifuge Swing Buckets S-4x750 max 1000g 4900rpm Lab

ITEM-36319

Eppendorf Centrifuge Swing Buckets S-4x750 max 1000g 4900rpm

These were removed from a university lab where they were surplus to requirements.

4x Eppendorf Centrifuge Swing Buckets S-4x750

M/N: NL017

Date: 03/13

Max RPM: 4800

These are in good cosmetic condition on the outside, but are slightly corroded and pitted on the inside.

They have not been tested.

£ 375.00 (ex. VAT) 1 in stock

Gilson Minipuls 3 Pump Head R2 For Peristalic Pump Part#: F117800 Lab

ITEM-36110

Gilson Minipuls 3 Pump Head R2 For Peristalic Pump Part#: F117800

This was removed from a university lab where it was surplus to requirements.

Item is in good used condition with minor surface damage.

It comes with the original packaging.

NEW ITEM

£ 375.00 (ex. VAT) 1 in stock

Thermo Scientific Sorvall Culture Flask Adapter 75008383 Lab

ITEM-35732

Thermo Scientific Sorvall Culture Flask Adapter 75008383

This was removed from a working lab where it was surplus to requirements.

The item is in brand new condition in its original packaging.

For processing Nunc™ T-75 or T-25 EasyFlasks™ in Thermo Scientific Sorvall Legend™ T/RT Centrifuges.

£ POA 1 in stock

Gallenkamp Digital Cooled Refrigerated Incubator Model: ICI180.WT2.C Lab

ITEM-29658

This item is new in stock. Please enquire for further details.

£ 350.00 (ex. VAT) 1 in stock

32 x Cryogenic Carriers L48.5 x W11 x H5 cm Lab

ITEM-46471

32 x Cryogenic Carriers Lab

These items were removed from a facility where they were surplus to requirement.

Each measures: L48.5 x W11 x H5 cm.

All are in good cosmetic condition.

£ 350.00 (ex. VAT) 1 in stock

Hettich EBA 30 Bench Centrifuge With Hettich 113 + 8 x 25g Tube Rotor Lab

ITEM-42760

Hettich EBA 30 Bench Centrifuge With Hettich 8 x 25g Tube Rotor

This item was removed from a university lab where it was surplus to requirement.

It is in very good cosmetic condition and in good working order.

Includes;

Hettich 1113 Rotor

Serial No. 000762
Max rpm 5000
8 x 25g Hettich 1122 tube holder buckets

£ 350.00 (ex. VAT) 1 in stock

Metrohm 837 IC Eluent Degasser Lab

ITEM-41845

Metrohm 837 IC Eluent Degasser Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Also included is the original User's Manual.

£ 350.00 (ex. VAT) 1 in stock

Planer Kryosave Compact KS/1.7 & Temperature Gauge Model KS10-230-B-F-H Lab

ITEM-35701

Planer Kryosave Compact KS/1.7 & Temperature Gauge Model KS10-230-B-F-H

Both units are in reasonably good cosmetic condition, but they both have various marks and scrapes.

They both power up and communicate successfully.

The system comprises;

Planer Kryosave Compact KS/1.7

Model: KS/1.7

Serial#: 3215

Planer Kryosave Temperature Gauge Model KS10-230-B-F-H

Model: KS10-230=B-F-H

Serial#: 3221

£ 350.00 (ex. VAT) 1 in stock

Jouan CR4-22 Benchtop Refrigerated Centrifuge Spares/Repairs

ITEM-45102

Jouan CR4-22 Benchtop Refrigerated Centrifuge With Swinging Bucket Rotor

This item was removed from a university lab where it was surplus to requirements.

The centrifuge powers on and is in fair cosmetic condition. The rotor did not reach the maximum RPM of 4750, stalling at 4100 RPM.

It has been temperature tested. (Thermometer not included.)

Due to the inability of reaching its max RPM, this centrifuge is listed as Spares/Repair.

Includes:

Jouan bucket rotor
4 x 85220020 buckets
4 x swinging plates
4 x bucket inserts for 50ml tubes
4 x bucket inserts for 25ml tubes

£ 350.00 (ex. VAT) 1 in stock

MSE 43124-141 4 x 200ml Swing-Out Rotor for Harrier 18/80R

ITEM-45361

MSE 4 x 200ml Swing-Out Rotor for Harrier 18/80R

This item was removed from a university laboratory where it was surplus to requirements.

The rotor is in good cosmetic condition and includes 4 x 200ml buckets.

Specifications.

Maximum Speed: 6000 RPM.
Model: 43124-141
Serial No.: B012R 9070

£ 350.00 (ex. VAT) 1 in stock

Beckman J2-21 Floor Standing Centrifuge with JA10 10000rpm Rotor Lab

ITEM-32037

Beckman J2-21 Floor Standing Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with only minor marks from use.

Included are;

Beckman J2 - 21 Centrifuge

Cat no. 341737

SN - E948

Rotor Type - JA 10

SN - 17342

10,000rpm Max

Hold 6 x Buckets 7cm diameter

£ 350.00 (ex. VAT) 1 in stock

NBS Cryo Research Ltd CO2/LN2 CO2 Back-Up Lab

ITEM-46739

NBS Cryo Research Ltd CO2/LN2 CO2 Back-Up Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 350.00 (ex. VAT) 1 in stock

Thermo Scientific 2 Litre Precision GP 02 TSGP02 Water Bath Lab

ITEM-46696

Thermo Scientific 2 Litre Precision GP 02 Water Bath Lab

this item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 350.00 (ex. VAT) 1 in stock

Scotsman AF-10 Commercial Ice Machine Lab

ITEM-46421

Scotsman AF-10 Ice Machine

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition and in working order.

£ 350.00 (ex. VAT) 1 in stock

LEC+ Laboratory Medical Freezer ISU1111 Lab

ITEM-46666

LEC+ Laboratory Medical Freezer ISU1111

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in working order.

£ 350.00 (ex. VAT) 1 in stock

Jouan S20 Swing-Out Laboratory Centrifuge Rotor 4100 RPM Lab

ITEM-46199

Jouan S20 Swing-Out Laboratory Centrifuge Rotor 4100 RPM Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility.

Specifications;

Max load 1.4kg
Max rpm 4100
Includes 2 x plate-buckets

£ 350.00 (ex. VAT) 1 in stock

LabPlant Refrigerated Immersion Probe Model RP 100 Lab

ITEM-42884

LabPlant Refrigerated Immersion Probe Model RP 100 Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 350.00 (ex. VAT) 1 in stock

B Medical Systems Plasma Storage Laboratory Freezer FR 410 G Lab

ITEM-32032

B Medical Systems Plasma Storage Laboratory Freezer FR 410 G

This was removed from a lab where it was surplus to requirements. We are told it was barely used by the client.

The unit powers up and has been tested with a digital thermometer (not included) to -41˚C.

It is in excellent cosmetic condition.

Internal dimensions - L50 W66 H87cm

2 Shelves 63 x 47cm

2 Drawers 59 x 46 x 6cm

£ POA 1 in stock

LMS Series 2 Model 230A Cooled Incubator, 290 L Lab

ITEM-47521

This item is new in stock. Please enquire for further details.

£ 350.00 (ex. VAT) 1 in stock

Evoqua Ultra Clear UV UF Water Purification System W3T198275 Lab

ITEM-31454

This Evoqua Ultra Clear UV UF Water Purification System was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further at our facility.

It is in reasonably good cosmetic condition with minor marks from use.

Operation hours since last service - 703

UV Lamp hours - 703

£ 350.00 (ex. VAT) 1 in stock

Statebourne biostor 5 Liquid Nitrogen Cryogenic Storage Tank/Dewar Lab

ITEM-17266

This Statebourne biostor 5 Liquid Nitrogen Cryogenic Storage Tank/Dewar was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but as it is a used item it will have some scrapes and marks from use.

It comes with a set of 6 storage racks and a trolley.

It has not been tested.

£ 350.00 (ex. VAT) 1 in stock

Thermo Scientific HERATHERM IMC 18 Incubator Lab

ITEM-47401

Thermo Scientific HERATHERM IMC 18 Incubator Lab

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and in good working order.

The lab confirmed it was in good working order prior to removal.

£ 350.00 (ex. VAT) 1 in stock

Sorvall Instruments RC5C Floor Standing Centrifuge Spares/Repairs

ITEM-47290

Sorvall Instruments RC5C Floor Standing Centrifuge - Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and has been tested using an SA-600 rotor (not included) at the rotor's maximum speed of 16,500 rpm.

However, during temperature testing it failed to reach its minimum set point of -20°C, only achieving -8°C.

Therefore, it is listed as Spares/Repair.

Please note; There is not rotor included.

£ 350.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek 2000 Laboratory Automation Workstation

ITEM-35153

This Beckman Coulter Biomek 2000 Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.

The item powers on but is unable to be tested further without software.

The item is in a reasonable, used cosmetic condition with marks and scuffs.

It comes with a sealed box of Beckman P 20 Pipette Tips (20ul)

£ 340.00 (ex. VAT) 1 in stock

Taylor-Wharton 35HC Liquid Nitrogen Dewar Lab

ITEM-47239

Taylor-Wharton 35HC Liquid Nitrogen Dewar Lab

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition and remains untested.

Included;

6 x Sample Storage Holders.

£ 330.00 (ex. VAT) 1 in stock

Taylor Wharton CX500 Liquid Nitrogen Dewar Lab

ITEM-37006

Taylor Wharton CX500 Liquid Nitrogen Dewar

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks but has not been tested.

£ 330.00 (ex. VAT) 1 in stock

LEC+ Model Type ISU1111 Laboratory Medical Freezer -20 Lab

ITEM-46688

LEC+ Model Type ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 325.00 (ex. VAT) 1 in stock

Syngene Blue LED Illuminator Lab

ITEM-48324

Syngene Blue LED Illuminator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The lab confirmed it was in good working order prior to removal

£ 320.00 (ex. VAT) 1 in stock

LEC+ Type No. ISU1111 Laboratory Medical Freezer Lab

ITEM-46687

LEC+ Type No. ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 315.00 (ex. VAT) 1 in stock

Gallenkamp Economy Incubator With Fan Size 1 INA.306.010J Lab

ITEM-35871

Gallenkamp Economy Incubator With Fan Size 1 INA.306.010J Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside.

£ 315.00 (ex. VAT) 1 in stock

BECKMAN JA-20 Fixed Angle Rotor Lab

ITEM-41409

BECKMAN JA-20 Fixed Angle Rotor Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has not been tested.

Specifications:

Type: JA-20
Serial Number: E.21076
Maximum RPM: 20,000
Capacity: Holds 8 x 50ml tubes
Included: Manual

£ 310.00 (ex. VAT) 1 in stock

LEC+ ISU1111 Medical Freezer Lab

ITEM-46686

LEC+ ISU1111 Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 310.00 (ex. VAT) 1 in stock

ELGA PURELAB Ultra GE Genetic MK2 Water Purifier Purification System Lab

ITEM-38469

ELGA PURELAB Ultra GE Genetic MK2 Water Purifier Purification System

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

Max Pressure inlet - 0.7/10

Max Pressure Working - 5.5/80

Comes with :

2 X ELGA Labpure S1 - Part No. LC182

2 X ELGA Sanitisation Block - Part No. LA698

1 X UV Filter

1 X ELGA Ultrafiltration Cartridge - Part No. LC151

£ 305.00 (ex. VAT) 1 in stock

Glotech GLO GT416 Low-Speed Laboratory Centrifuge with GRS-S-50-4 Rotor Lab

ITEM-23307

This GLO GT416 Low-Speed Laboratory Centrifuge with GRS-S-50-4 Rotor was removed from a university lab where it was surplus to requirements.

The unit powers up and runs smoothly up to 4000rpm.

It is in reasonably good cosmetic condition with some marks from use.

Rotor - GRS-S-50-4

Max rpm 4k

Max rcf 2700xg

4 x GLB-10 Swinging buckets fits 15ml tubes

£ 300.00 (ex. VAT) 1 in stock

Wessington Cryogenics ES-60 60L Liquid Nitrogen Storage Dewar Tank Lab

ITEM-29811

This Wessington Cryogenics ES-60 60L Liquid Nitrogen Storage Dewar Tank was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in good cosmetic condition with minor marks from use.

Capacity: 60 litre

Build year: 1995

£ 300.00 (ex. VAT) 1 in stock

Job Lot of Freezer Racking Sanyo/Denleystor

ITEM-44781

Total number needed

£ 300.00 (ex. VAT) 1 in stock

Cell Bank Fersht Group Dewar Lab

ITEM-44611

Cell Bank Fersht Group Dewar Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic, but we are unable to test it further at our facility.

Also included:

6 x Container Sample Racks

1 x Skate on Wheels

£ 300.00 (ex. VAT) 1 in stock

Heraeus Biofuge 13 Centrifuge Lab

ITEM-37826

This Heraeus Biofuge 13 Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers on and runs smoothly up to 13,000rpm. It is in reasonably good cosmetic condition but is marked from use.

We are unable to test this item further at our facility.

18 sample holders.

£ 300.00 (ex. VAT) 1 in stock

LEC+ No. ISU1111 Laboratory Medical Freezer Lab

ITEM-46685

LEC+ No. ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 300.00 (ex. VAT) 1 in stock

FisherBrand Precision Series FPRS2202 Balance Lab

ITEM-46486

FisherBrand Precision Series FPRS2202 Balance Lab

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order. (Calibration weight not included.)

The power supply is included.

£ 300.00 (ex. VAT) 1 in stock

Granite Topped Isolation Table - Removed from Zeiss Confocal System Lab

ITEM-45160

Granite Topped Isolation Table - Removed from Zeiss Confocal System Lab

This item was removed from a university lab where it was surplus to requirement.

It is in very good cosmetic condition. We are unable to test it further at our facility.

It was removed from a LSM510 Confocal System and was made bespoke to fit a Zeiss Axiovert 200M Microscope.

Table-top Dimensions:

72cm L x 54cm W.

£ 300.00 (ex. VAT) 1 in stock

Sanyo CO2 Laboratory Incubator MCO-17AIC IR Lab

ITEM-29769

This Sanyo CO2 Laboratory Incubator MCO-17AIC was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order, but will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use. The handle has come off, but this does not affect the operation of the unit.

Item is supplied with 4 shelves.

Internal dimensions are: L45cm x W45cm x H66cm.

£ 300.00 (ex. VAT) 1 in stock

Fisher Scientific DMU12 12L Water Bath Lab

ITEM-41486

Fisher Scientific DMU12 12L WaterBath Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

No lid included.

£ 300.00 (ex. VAT) 1 in stock

MSE Falcon 6/300 Centrifuge w/ MSE Swing Out Rotor Lab

ITEM-36610

MSE Falcon 6/300 Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on and runs well with he fitted rotor, though we are told it will not go higher than 3000, even with a higher rated rotor.

This item also includes the following:

1 x Mistral MSE Rotor - 43124

Capacity: 4 x 750ml
SN: 986766
Max RPM: 2500
(There are no rotor buckets included)

£ 300.00 (ex. VAT) 1 in stock

Thermo Scientific Matrix Hydra II Automated Liquid Handling System Lab

ITEM-23391

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition with marks from use. All modules power up.

We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes.

The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working.

The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal.

We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts.

The system is made up of the following;

1 x Matrix Hydra II

Cat no. 109610

1 x Matrix 2 Position Stage

1 x Apogent Discoveries Matix Hydro Pump Module

The unit powers on with all 3 Fills working.

1 x Matrix P1 Control Box

1 x Innovadyne 1-Channel Nanofill

The unit powers up.

1 x Grant Instruments Type MS1

The unit powers up.

Dell Laptop with Microsoft Mouse

Model - PP04X

Hydra II-Plus-One Control Software Version 3.1.3 Installed

The unit powers up and the software runs.

Software Discs:

Matrix Hydra II-Plus-One Control Software Version 3.1.3

Matrix Hydra II-Plus-One Control Software Version 3.1.2

SuperLogics LE Software Suite Rev 2.9

2 x Socket Installation discs

Various tubing and accessories

Operating instructions

£ POA 1 in stock

Zanussi ZFT610W Freezer Lab

ITEM-47527

This item is new in stock. Please enquire for further details.

£ POA 1 in stock

Liebherr GP1456 Laboratory Freezer

ITEM-47532

This item is new in stock. Please enquire for further details.

General Laboratory

Filters