Items 1 to 13 of 13

Image of item

£ 4,875.00 (ex. VAT) 1 in stock

Aciera F4 Manual Milling Machine Engineering Workshop

ITEM-19590

This Aciera F4 Manual Milling Machine was removed from a university engineering department where it was surplus to requirements. The department has owned it since new and it has never been used heavily by them.


The unit has been regularly serviced and is in full working condition. We have been informed it was made up to current health and safety regulations.


There are various tool holders with collets and arbours, and drill chucks. It has a digital read-out system retro-fitted although the encoder on the X-axis is broken but we were informed it is still very accurate. 


The machine bed is 80x25 and in very good condition. All the measuring calibrations are in mm.


Please enquire if you would like a delivery quote.

Image of item

£ 3,690.25 (ex. VAT) 1 in stock

Adcock-Shipley Bridgeport Turret Mill Milling Machine + Tooling Engineering

ITEM-19595

This Adcock-Shipley Bridgeport Turret Mill Milling Machine was removed from a university workshop as surplus to requirements. The workshop was being converted into a training centre and thus this machine was no longer required.


Whilst we have not tested the unit ourselves, we saw it in operation a couple of weeks before removal, and it appeared to be in good working order, with a wide variety of tooling.


If you are not viewing this directly on our site, then please get in touch if you would like to see more photos of the machine and its tooling as we are limited to a certain number of images on some selling platforms.


The unit is in good working and cosmetic condition. It has some marks from use.


The mill is sold as collection only, but we can provide delivery quotes across the UK. If you have a forklift that is capable of unloading a pallet weighing approximately 1.2-1.3tonnes this will greatly reduce your shipping costs. IF you require additional services such as getting the machine into a workshop and off pallets etc, please let us know so we can quote accordingly.



The bed measures: 42" long x 9" wide.

It comes with the following accessories:


1 x White Wooden(Pine) Wall mounted box.

Used for mill accessories.

45cm H x 45cm L x 17cm D.


1 x Victoria 6" 3 Jaw Chuck on base.


1 x Pratt Burnerd 1210- 01305/ 5" 3 Jaw Chuck on base.


2 x VEE Blocks 9"(22.8cm L x 6.6cm W x 14.4cm H).


1 x Angle Plate 9".


1 x Record Vice.


3 x 15.8mm End Stops.


1 x Zenit 847S.063 Face Milling Cutter.


1 x 1-16mm B18 Keyless Chuck.


1 x Bridgeport No.1 Boring Head (Met).


2 x A.E. Pike Parts.


1 x Vice.


2 x Handles.


1 x Britool 3/4 - 7/8 spanner.


1 x Clamping Kit with stand.


2 x Unknown threaded parts.


Catalogues and manuals.


1 x Angle Plate 5"


1 x Small adjustable table.


7 x Collets.


1 x Clarkson Autolock Collet Chuck in Box.


Large collection of milling bits.


2 x Chuck Keys.


Image of item

£ 3,750.00 (ex. VAT) 1 in stock

Beaver Mill Manual Milling Machine MK.2 Engineering Workshop

ITEM-19591

This Beaver Mill Manual Milling Machine is being sold of a UK university. The department owned the machine since new, and has never used it intensively.


The unit has been regularly serviced and is in full working condition. We were informed it has been made up to current health and safety regulations.


There are various tool holders with collets and arbours, and drill chucks. It has a digital read-out system retro-fitted. It is still very accurate. The original manual for the machine is also present.


The machine bed is 144x30. All the measuring calibrations are in mm.


Please enquire if you would like a delivery quote.

Image of item

£ 1,500.00 (ex. VAT) 1 in stock

Brierley ZB32 Drill Grinder with Extraction System

ITEM-19341

This Brierley ZB32 Drill Grinder with Extraction System was removed from a university engineering department where it was surplus to requirements.


The units are in reasonably good used cosmetic condition though being engineering equipment, they do have various marks and signs of general use.


We have not powered or tested them due to them originally being hardwired on site - but we were assured the system was in good working order.


The cupboard below the grinder contains the following:

1 x Operators Manual.

1 x 8" x 10" heavy metal rest/stand.

1 x Tray containing various spares/tools.

1 x What appears to be another extraction section.

1 x Bandsaw blade.

Image of item

£ 375.00 (ex. VAT) 1 in stock

Elliot of London No1. Bench Pillar Drill with Tool Cabinet 3 Phase

ITEM-17276

Elliot of London No1. Bench Pillar Drill with Tool Cabinet


This was removed from a university engineering department where it was surplus to requirements.


It had been unused for a number of years and no testing was carried out due to the power lead being removed. As far as the department could remember, it worked when removed and the power cable was used on another appliance. We cannot however guarantee that it is in working order as we have not tested it ourselves - but if there is a problem the unit will come with a 45-day return to base warranty.


It has a 0.5 hp 440v motor and the drill speeds are 340-2580 rpm as indicated on the panel. The motor, drive pulleys, belts and chuck all turn by hand smoothly. A chuck key is attached for the 3 jaw chuck. A safety guard/ shield is fitted at the chuck and operates as should. A clamp to hold items on the drill bed is also fitted and works.


The drill is mounted on a steel cabinet with one shelf. The lock/latch on the door has been drilled out as the key was lost some time ago.


The drill dates from the 1960s. The paintwork is peeling but the steelwork is in great condition. No damage to be seen.


Image of item

£ 168.75 (ex. VAT) 1 in stock

HIC LTD Hydraulic Pump / Power Unit for Lathe Profiling Attachment VMF534TF

ITEM-15308

This HIC LTD Hydraulic Pump / Power Unit for Lathe Profiling Attachment was removed from a university workshop where it was surplus to requirements.


We have not tested the unit.


It has a Compton Parkinson AC motor.

VMF534TF.

0.5bhp, 1425rpm.

380/440Volts.

1.05amp.

Crabtree Type D6 Switch.


It's a very old unit and there is not much more info on the unit. We think it may be Hepworth brand.


It is in reasonable cosmetic condition but it is well used.

Image of item

£ 2,512.50 (ex. VAT) 1 in stock

Keetona Powered Metalworking Guillotine 048076 (Max 1/8" Mild Steel Capacity)

ITEM-15361

This Keetona Powered Metalworking Guillotine was removed from a university workshop where it was surplus to requirements.


The unit is vintage and was made in 1967, this said it was removed from a working environment and likely has a lot of like left in it. We haven't tested it on our site, however.


It is in well-used condition but good for the age.


Max capacity 1/8" Milled Steel.

14SWG .080" Stainless Steel.

Dimensions: 210cm L x 95cm W x 144cm H.


Blade length is 132cm long.


It also comes with a rear cage and scrap trolley.


Please note the delivery option assumes you have a forklift available to unload the unit from a curtainside trailer. If you need unloading or any other delivery rather than curtainside trailer - please let us know so we can get you an accurate quote.

Image of item

£ 3,000.00 (ex. VAT) 1 in stock

Mitchell of Keighley Engineering Workshop Lathe, 170cm Chuck, 3-Phase

ITEM-17271

This Mitchell of Keighley Engineering Workshop Lathe was removed from a university engineering workshop where it was surplus to requirements.


The university told us it powers up and has been used recently, but said that it may need additional safety guards to be fitted to bring it up to modern standards. We have not conducted an assessment of this so any buyer will need to review the guards in accordance with regulations like PUWER.


There are some machine tools and gear cogs with it. There is also a safety guard supplied with it.


It has a 75cm chuck fitted. The bed length is 170cm. The speed range is from 22.5 - 750 rpm as indicated on the gear lever plates


The auto-feed screws are in good condition with no chips or bends. The bed is in good condition with no damage. It is in overall good condition for its age but does have a patina. It will need oiling before it is used again.


It requires a 415v 3 phase power to operate. The electric motor is a 5 hp / 7.8 Amp unit.


Please enquire if you would like a delivery quote. The unit is approximately 2.8m long.


Image of item

£ 1,875.00 (ex. VAT) 1 in stock

Startrite EFI FGR 7104 Heavy Duty Pillar Drill Engineering Workshop 3-Phase

ITEM-17273

This Startrite EFI FGR 7104 Heavy Duty Pillar Drill was removed from a university workshop where it was surplus to requirements.


We were informed by the university that it was in working order and was simply replaced by a newer piece of equipment. It has not been tested at our site. The main power switching unit has a broken stop button, so a new unit button will be required. The unit will also need assessment for any additional guards it may need to reach modern standards under PUWER or other regulations - we have not carried out this assessment so this will need to be assessed by the buyer.


The unit is in good condition for its age, dating from the early 1960s, but does have age and usage-related marks.


The bed size is 79 x 48. It has a drill speed range from 75-2800 rpm. It requires a 415v / 3 phase power supply to operate. It has a 1.9hp motor.


It has a suds cooler for drilling and the head takes morse taper type fittings.


Please note this unit is very heavy, and the quoted delivery assumes that you have a forklift available and delivery will be by a curtainsided lorry which you would need to forklift unload. If you do not have a forklift or require the unit be removed from the pallet inside your workshop please let us know so we can get an accurate quote.


Image of item

£ 562.50 (ex. VAT) 1 in stock

Steel Topped Heavy Metal Engineering Workshop Table / Bench

ITEM-17267

This Steel Topped Heavy Metal Engineering Workshop Table/Bench was removed from a university workshop where it was surplus to requirements.

it is in reasonably good cosmetic condition but has some rusty marks on it. It is not damaged at all, it's just showing signs of age.

It has a solid metal construction and comes with a wooden covering.


Dimensions:

Worktop size- 122X92cm

Height: 75cm





Image of item

£ 1,500.00 (ex. VAT) 1 in stock

Vacu-Honer DH 883 Sand Blasting Cabinet Engineering

ITEM-17272

This Vacu-Honer DH 883 Sand Blasting Cabinet was removed from a university engineering workshop where it was surplus to requirements.


The unit was in use up until recently. We have been informed it is still in working order, though it has not been tested at our site. Apparently it gets blocked up from time to time and so needs regularly shaking but otherwise works.


The unit dates from the early 1960s but is in good condition for its age. It does have signs of age and usage.


The door is a sliding steel type with counterbalance weights. The door opening is 71 x 32 cm.


The cabinet is 90 x 74 x 69 cm and the glass to the cabinet is in good condition with no cracks.


It requires a 415v / 3 phase power supply to operate. The bulkhead lights in the cabinet have their own 240v connection.


There are fixed thick rubber gloves fitted and blasting and blow-off nozzles in the cabinet which are operated by a foot pedal. The maximum operating pressure is 150 psi, as indicated on the gauge. The air feed is currently fitted with a broomwade air coupler but is easily changed to suit your own connection type. There is also a water trap fitted to the line.


Please note the quoted delivery prices assumed you have a forklift, and unit will be delivered on a curtain-sider lorry on a pallet. If you need other forms of delivery or do not have a forklift please let us know so we can provide an accurate quote.


Image of item

£ 300.00 (ex. VAT) 1 in stock

W&T Avery Ltd Vintage Cast Iron Weighing Scales Upcycling Engineering

ITEM-17275

This W&T Avery Ltd Vintage Cast Iron Weighing Scales was removed from a university workshop where it was surplus to requirements.


It has not been tested.


It is in reasonable cosmetic condition but has been stood for many years. It would need much restoration if it were to be used again.


It would likely be better used as a decorative piece.



Image of item

£ 2,625.00 (ex. VAT) 1 in stock

Warco 1327R Industrial Metalworking Lathe + Accessories

ITEM-19336

This Warco 1327R Industrial Metalworking Lathe with Accessories was removed from a university lab where it was surplus to requirements.


The unit appears to be in good used cosmetic condition but it does have quite a few marks and signs of use.


The unit powers up and appears to run as it should. The lubrication pump also runs when switched on. It uses a 16Amp 5 pin 3 phase power.


It comes with various spares and accessories including:

1 x 66 gear.

1 x 60 gear.

1 x 54 gear.

1 x 42 gear.

1 x 40 gear.

4 x different size chuck keys.

4 x lathe turning tools.

2 x steady rests.

2 x Manuals.

2 x Keys for emergency stop.

1 x Optibelt-VB B790 Ld/17x750 Li B30.

1 x Optibelt-VB B890 Ld/17x850 Li B34.

1 x Spare 6" 4 jaw chuck 307.

1 x Spare 10" faceplate.

1 x Square tool holder.

1 x Tray containing various threaded bars and nuts.

Also includes 3 x jaws for a chuck.


Delivery quote assumes you have a forklift to unload and delivery would be on a curtainsider lorry - if you need an alternative quote please let us know.

Items 1 to 13 of 13