Intravital Microscope System - Zeiss Examiner Z1 with Accessories & Software

This is being sold on behalf of a client. It is surplus to requirements.

The system is in full working order, and in excellent cosmetic condition with minor marks.

There are a vast amount of accessories, extras and add ons included with this system.

1. VivoTM 100 Intravital Microscopy Workstation

Includes motorized research fixed stage upright microscope stand with harmonic focusing drive, 2-position

nosepiece, motorized 5-position filter cube turret, manual narrow profile long WD condenser, slider for Dodt

contrast, LED transmitted light lamphouse, two camera ports with c-mounts, crosshair reticle and dust cover. Also

includes direct-coupled white light LED epi illuminator, high speed 2048x2048 sCMOS Flash4.0 v2+ camera, motorized

x,y translating platform stage, 36"x36" vibration isolation table and equipment rack workstation. Windows 7 64-bit workstation with dual Six-Core Xeon 1.6GHz processors (10M L3 Cache), 16GB 2133MHz DDR4 RAM, 2GB Nvidia Quadro K620 workstation graphics card, 256GB Solid State Drive (SSD) (approx. 300MB/s sequential transfer rate),

8XDVD+/-RW, 1300W power supply, backlit wired keyboard and 27" flat panel monitor. SlideBookTM software for 3D multipoint image capture and analysis and one additional offline license. System includes one day of on-site installation and training, a one year warranty on all hardware components and one year of free updates for all software components.

2. W Plan-Apochromat 40x/1.0NA Water Dipping Objective for VIVOTM

Working distance 2.5mm.

3. Upgrade from LED White Light Source Direct Coupled to LED 4-Color Light Engine for Fixed Cell Imaging for Zeiss Microscopes

includes light engines for DAPI (390/18), GFP (475/28), RFP (542/27) and Cy5 (632/22)

4. Microscope Filter Cube for DA/FI/TR/Cy5 Pinkel Set (No Exciters)

for LED illumination, includes quad-band dichroic and quad-band emitter

Photomanipulation Equipment -

5. Ablate!TM Photoablation System for Fixed Position Illumination

532nm pulsed laser, pulse energy > 60 ?J @ 200 Hz. Includes automated intensity control and Photomanipulation module for SlideBookTM.

6. Ablate!TM Epi Mount Adapter for VIVOTM

Allows attachment of Ablate!TM illuminator to the epi-fluorescence port of VIVOTM workstations. Also allows attachment of a widefield epi-fluorescence light source via light guide for simultaneous illumination

.

7. Ablate!TM 532 Notch Dichroic for Epi Mount Light Sources

transmits 532 laser, reflects visible wavelengths >90%

8. Support Kit for Ablate!

9. Microscope Filter Cube for Ablate!TM 532 Notch Dichroic and Blocker for Intensifier

includes notch dichroic for 532 illumination and blocking emitter for protection of intensifier from reflection of 532 pulses

The system is available for collection from Cambridge, UK, but we may be able to offer delivery of the system at an extra cost. Please enquire for a quote.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Olympus LV200F LuminoView Bioluminescence Microscope System

This system was removed from a university laboratory where it was surplus to requirements.

The Olympus LV200F is in good used cosmetic condition. It powers on with the camera displaying an output; however, an image could not be obtained due to the lack of suitable equipment, namely a chiller for the camera.

This system is in full working order but requires a chiller to be fully operational, as the camera needs it for cooling.

System Components:

• Olympus LV200 - LuminoView Bioluminescence Microscope

• Fujitsu Celcius Windows XP PC: Includes keyboard, monitor, and mouse. Installed software includes:
• Image J, Cell M Imaging Software
• HC Image-Live
• Total Commander version 9.0a
• Nero
• OBS system configuration

• A dongle for the software is also included.

• 2 x Installation CDs: IX2 and Cell M.

• Olympus MI-IBC CO2 Incubation System
• Model: MI-IBC-IF-2MM
• Serial No.: 429901895
• The plate carrier was warm, indicating functionality.

• Hamamatsu EM-CCD Digital Electron Multiplier Camera
• Model: C900-13

• Olympus IX2-UCB-2 Control Box: Includes an Olympus U-HSTR2 remote.

• Olympus LG-PS2-5 100w Light Guide Illumination System: Comes with LG-PS2-FL.

Also Includes:

• 5x Operating Manuals:

• Olympus LG-PS2-5 Light Guide Illumination System
• Olympus IX2-UCB-2 Control Box
• Olympus MI-IBC CO2 Incubation System
• Hamamatsu CCD Digital Electron Multiplier Camera
• Cell M imaging software

Nikon Eclipse Ni Microscope With Infinity 3 Camera Lab

This system was removed from a university where it was surplus to requirement.

The microscope is in good cosmetic condition and full working order.

It is fully operational with both software installed on the included PC.

Includes the following:

HP Desktop PC with Windows 10.

Software installed:

• Lumenera Infinity Analyze 7.1.1.66 imaging software.
• And MicroManger 2.03.

Infinity 3 camera with power supply cable.

Objectives:

• Nikon Microscope Objective - Plan Fluor 10X/0.30 Ph1 DLL ∞/0.17 WD 16.0
• Nikon Microscope Objective Plan Fluor 20X/0.50 DIC M/N2 ∞/0.17 WD 2.1
• Nikon Microscope Objective Plan Fluor 40X/0.75 Ph2 DLL ∞/0.17 WD 0.72

Eyepieces:

• 2 x Nikon C-W10xB/22

Zeiss Axioplan 2 Microscope + LSM 510 Laser Scanning System

This system was removed from a university lab where it was surplus to requirements.

The microscope is in working order, but we have not tested the laser due to safety restrictions at our site.

There are no objectives fitted.

Items included are:

-Zeiss LSM Control S/N- 000260

-Hal 100 Lamp

-Lasos Lasertechnic GMBH S/N- 04041136 M/N- 9600-07

-Zeiss HBO 100W

-Zeiss HBO 100W/2

-Zeiss Lasermodul UV

-Fujitsu Siemans mouse

-Relevant manuals and guides

-Connection cables

-Comms PCi Cards & Dongle (non USB)

This ZEISS Stemi 2000 Microscope was removed from a university lab where it was surplus to requirements.

The unit is in working order and Zoom is fully operable, we are unable to test it further at our facility.

It is in reasonably good cosmetic condition but has some marks from use.

This VWR VisiScope BL224PL T1 Digital Microscope was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. It is in full working order manually but is missing the display that should be mounted on it.

4x Objectives:

1x 4/0.1 160/0.17

1x 40/0.65 160/ 0.17

1x 100/1.25 160/0.17 OIL

1x 10/0.25 160/0.17

2x WildField Eyepieces:

WF 10X/18

This item is new in stock. Please enquire for further details.