3 x Vintage RS and Enox Tool Boxes / Chests with Pull Out Tray

These were removed from a university where they were no longer needed.

Included is;

1 x RS Silver - 61 x 21cm

1 x RS Silver - 46 x 21cm (has unknown coded padlock but is not locked)

1 x Enox Blue - 46 x 21cm

All the units are in reasonably good cosmetic condition but have marks from use. All the chests operate and have pull-out trays.

Airflow Spray Booth Extractor Fan System - Mod No 2.2KW

This was removed from a university where it was surplus to requirements.

We didn't have the means to power this up but we were told by the previous owner that it only had 20 running hours on the clock.

It is in good cosmetic condition.

Full-Scale Aerodynamic Wind Tunnel Aeronautical Engineering Device

This system is being removed from a leading UK university engineering department as it is no longer required.

It is in full working order.

This BSL Electron Variable Speed AC Drives FVR022G5S-7RS Inverter was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has some marks from use. It powers up but has not been tested further.

This Buehler Motopol 2000 Grinder/Polisher Model - 95-2800 was removed from a university lab where it was surplus to requirements.

The unit powers up and appears to be in working order. The wheel spins but it has not been tested further.

It is in reasonably good cosmetic condition but has some marks from use.

Included with it is;

1 x Operating & Maintenance Instructions.

1 x Parker Regulator

1 x 31cm Grinding disc

1 x 19cm Disc

1 x 18cm disc with bolt and 10 holes 30mm in size

1 x Lid/cover

1 x Water hose

This CNCSMART Plus CNC Router with Trend Routing Technology is being sold on behalf of a university workshop. It is surplus to requirements.

The unit is fully functioning but was disassembled for removal. It is currently located in Manchester.

The system was still in regular use and is in full working order.

It is in good cosmetic condition with the usual sorts of wear and tear from use.

This Dalair Air Handling Unit w/ Control Box was removed from a university where it was surplus to requirements.

The control box was in good working order before removal but we are unable to carry out testing. The wiring to the unit has been severed just below the panel to aid with removal, but the interior wiring is still intact. This is a 415v 3ph unit that powers a 240v / 24v system.

The unit is in good cosmetic condition with very few marks.

The air handling unit was also in good working order before removal. Again we were unable to test it as the wiring has been severed in places to aid disconnection. There is a key with this unit to open the locks on the access doors. The unit is in good cosmetic condition with very few marks.

Please note - the delivery option on this item is on the basis of pallet courier shipment with you having a forklift to unload. For buyers who do not have a forklift available, or for international buyers - please get in touch for best possible shipping options.

DMG Rubicon TesT 112.5kn Universal Tensile Testing System with Software

This was removed from a university lab where it was surplus to requirements.

The units power up but have not been tested further. The lab manager said it had been adapted for use with furnace parts.

They're in good cosmetic condition but have marks from use.

The lot contains:

1 x TesT GmbH 112.5kn Universal Testing Machine.

1 x DMG Rubicon Controller

1 x Javelin Computer Systems PC.

1 x HP SK-2880 Keyboard.

1 x Dell 0YH958 Mouse.

1 x Dell LCD Monitor.

1 x DMG Software User Manual.

1 x DMG Operating Instructions.

1 x Bag Of Spare Screws.

1 x VGA Cable.

Various Spare Metal Parts.

The PC has:

Rubicon 825 Software.

Windows XP Professional 2002, Service Pack 3.

All user data has been removed.

This Engineering Workshop Foot-Operated Sheet Metal Guillotine was removed from a university workshop where it was surplus to requirements.

The unit is in reasonably good cosmetic condition but being a used metal shop machine it is going to have various marks and signs of general use.

It doesn't appear to have any makers marks at all. It has not been tested.

The blade cutting length is 92.9cm.

Flow Visualisation Apparatus Mobile Bed -Visualisation Tank Aeronautical Lab

From a top UK University.

Custom made by university Technicians.

In very good condition.

Tested and runs smoothly.

This unit was removed from a university engineering lab as surplus to requirements.

At our site we have not tested it but we were assured it was in full working order when last used.

The unit cost £10k when originally purchased by the university.

This system is being removed from a leading UK university engineering department as it is no longer required.

It is in full working order.

• This tunnel was originally constructed at Imperial College London.
• The tunnel has four working sections of different size.
• The motor and control system were replaced at about 4 years ago.

This Gage Technique LTD Miniature Strain Meter Typer GT1174 was removed from a university engineering department where it was surplus to requirements.

The unit powers on with 6 AA batteries (not included). It was not tested further.

It has lots of age-related marks on the panel and the wooden case has sustained damage. It is in good condition generally.

This jet engine is being sold on behalf of a leading UK universities engineering and aerospace department.

The engine which would have originally cost around 1 million USD was owned by MyTravel Aircraft Engineering. It was designed for the DC10 aircraft.

In 2004, the engine type was retired as MyTravel retired the DC10 and moved to the Airbus Aircraft.

Rather than disposing of the engine, it was moved to this universities engineering department as a training resource for students.

This is a genuine full size jet engine.

Its an extremely rare opportunity to acquire a unit like this.

General Electric Model: CF6-6D1A Jet Engine

Removed from retired DC10-10 Aircraft

Has flown about 40 million miles in its 20-year working life.

Please note - whilst the engine was operational prior to going into storage, it is no longer in service and we can offer no warranties to its current performance. It is initially intended for sale for display / museum purposes only, and therefore we would need to discuss any intended flight of the engine or any of its parts.

It is a non negotiable of sale that we will need to diligence check the intended use of any prospective buyer. In most cases, a non-flight disclaimer will be required unless you are able to provide appropriate documentation / evidence to demonstrate that any intended use will meet the requirements of the Civil Aviation Authority or other relevant governing bodies. We can discuss this further with you prior to sale and then we would need to approve any proposed flight plans with our university client prior to sale.

Instron 1122 Tensile Testing Machine Complete w Manuals & Compression Load Cells

Unit was pulled from a working environment at a UK university and we were assured it is in full working order.

It comes with controllers and manuals, as well as compression load cells.

This Instron Engineering Tensile Load Cell A was removed from a university lab where it was surplus to requirements.

The unit is in reasonably good cosmetic condition with marks from use.

It has not been tested.

This Instron Tensile Load Cell B was removed from a university lab where it was surplus to requirements.

The unit has not been tested as we do not have the appropriate power cable.

It is in good cosmetic condition but has marks from use.

Lot of Vintage Measuring Equipment

This was removed from a university workshop where it was surplus to requirements. Everything is in good cosmetic condition but has not been tested.

Included in the lot are;

Set of 4 Starrett Micrometers in a Wooden Box:

1 x 125mm-150mm

1 x 100mm-125mm

1 x 75mm-100mm

1 x 50mm-75mm

& extra tips in the box:

1 x 125mm

1 x 100mm

1 x 75mm

1 x 25mm

1 x 50mm.

1 x Tesa Threaded Micrometer AC1E.

Comes in a wooden box.

1 x M&W/Moore & Wright 1-2" Micrometer No966.

Comes in a plastic case.

1 x M&W/Moore & Wright 3-4" Micrometer No966.

Comes in a plastic case.

1 x M&W/Moore & Wright Depth Micrometer.

Comes in a plastic case.

1 x Tesa Depth Micrometer.

Comes in a wooden case with extra sizes of depth tips.

1 x Mitutoyo Depth Micrometer 229-127.

Comes in a plastic case with extra sizes of depth tips.

1 x Eaves & Washbourne Dial Test Indicator.

Comes in a wooden box and original paperwork.

1 x Mercer No4458 Type 53 Gauge.

The face of the dial has some damage. It doesn't appear to affect the operation of the unit.

Comes in a wooden box with extra bits.

1 x Mercer 95011 581 Wooden box.

Contains 1 x Eclipse No 902 Magnetic Base and some attachments.

1 x Chesterman Height Gauge No 369.

Comes in a wooden box and other spare parts.

1 x Matrix IMP Slips/Slip gauge set No 3413C.

Comes in a plastic box.

1 x Starret No 237 Depth Gauge.

In the original cardboard box.

1 x Eclipse No903 magnetic base.

Comes in a wooden box.

1 x A.B.C. part.

Comes in a wooden box.

2 x Cambridge Instruments 22˚ & 17˚ Blades.

Both come in wooden boxes.

1 x John Bull Series 2 Dial Gauge.

Comes in the original box.

1 x RS 602-820 Comparator Stand.

With RS 733-671 gauge.

2 x Sets of Triangle Brand Stocks & Dies.

Both come in wooden boxes.

This Jones Shipman S4012-012 Rotary Table was removed from a university workshop where it was surplus to requirements.

The unit is in good cosmetic condition but as it is an engineering item it does have marks from general use.

The controls are smooth but it has not been tested further.

It comes with a small trolley.

Kurt J. Lesker - Thin Film Sputtering Deposition System

This system was removed from a university Physics & Electrical Engineering Department as surplus to requirements. It was used in a university lab for research and for building solar cells (200 to 300 nm thin film layers of material per deposition) the machine was routinely cleaned with vacuum cleaners and brush for avoiding cross-contamination during the depositions. The machines will contain small residues of various materials inside the main vacuum chamber. List of materials for used: Cu, Au, Zn, In, Sn, Bi, Sb, Mo, Al, Ni, ZnO, SnO2, InO2:SnO2, ZnO:Al, Mo:Na

Prior to decommissioning in May 2021 it was fully operational. We were told by the lab manager that it would require service before reinstallation by a competent engineer. Also, some parts/modules (vacuum pumps, power transformers, etc,) have been carefully disconnected by our collection team and lab technicians, to be able to remove and transport the system from the lab to our storage facilities. All the removed parts are safely packed and stored at our warehouse.

it also comes with some spare parts and tooling.

Please enquire for further details - we can conduct inspections on the unit, or happy for you to view, etc.