SCM Minimax SC 4 Elite Sliding Table Panel Saw 300x194x148 cm (LxWxH)

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Dimensions:

• External length (cm) 300
• External width (cm) 194
• External height (cm) 148

Beckman Coulter Optima L-90K Ultracentrifuge Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

Cooling performance was initially inconsistent, though later testing at 1,000 rpm confirmed the unit reached 0°C, suggesting a potential temperature sensor issue.

Please note: There is no rotor included.

Includes;

• 4x Feet
• Instruction Manual
• 2x Spare Rubber Seals
• Beckman Branded Optiseal tube holder
• 2x Zonal Keys

Scalar Technologies SG-Certus ScalarGauge Film Thickness Measurement

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note; There is no software included.

Includes;

• Fiber Optic Cables.

Invitrogen Luminex 100/200, XYP, SD and PC System w/ Software Lab

This item was removed from a facility where it was surplus to requirement.

The main Luminex 100/200 unit is in good cosmetic condition but could not be powered on due to testing restrictions regarding class 3+ lasers at our facility.

All remaining units are in good cosmetic condition and power on.

The previous owner stated the system was in working order up until it was last used in mid 2025

Systems Comprises:

• Invitrogen Luminex 100/200
• Invitrogen Luminex XYP
• Invitrogen Luminex SD
• PC, Monitor, Keyboard & Mouse (Luminex Software installed.)

Vante Tube Sealer Model 4160 with 4161 & 4162 Sealing Heads

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes;

• Vante Tube Sealer Model 4160
• Vante 4161 Sealing Head
• Vante 4162 Sealing Head

Amco Modular Enclosures Cabinet with SVT Associates MBE Modules

This system was removed from a university lab where it was surplus to requirement.

The cabinet contains five modules that were previously part of an SVT Associates Molecular Beam Epitaxy (MBE) system.

The system comprises the following:

• Oerlikon MAG DRIVE Digital module (includes manual, in German)
• Module labelled "Effusion Cell Controller" – SN: 530909192005
• Module – SN: 530908092005 (only module confirmed to power on)
• Module labelled "Gate Valve Controller"
• Another module labelled "Effusion Cell Controller" (would fail a PAT test due to missing panels exposing internal components)
• 1x Keys

Additional details:

• Approx. module space width: 44 cm
• Internal extension sockets are fitted for American-style plugs
• Includes a large number of various internal cables

MP Biomedicals FastPrep-24 5G Bead Beating Device

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good working order.

The item has been tested using the pre-programmed testing option, which ran successfully. The test tube rack lock holds the rack securely in place.

Includes:

• Additional tube rack
• Instruction sheet
• Original box

Jasco FP-8200 Spectrofluorometer System with PC & Peltier Cell Holder

This system was removed from a facility where it was surplus to requirements.

The spectrofluorometer was successfully connected to the PC system, however no further testing has been carried out at our facility.

Software/Firmware:

Driver version: 1.07.02 (Build 2)

ROM version: 1.02.02

Included Components:

• Jasco FP-8200 Spectrofluorometer

• Jasco ETC-814 Peltier Thermostatted Cell Holder with Stirrer

S/N: B002561515

• Jasco MCB-100 Mini Circulation Bath

S/N: B051961408

• Dell OptiPlex 5040 PC (Intel Core i3-6100 @ 3.70GHz)

• Dell Monitor

S/N: CN-0KKMMW-74261-61P-715L-A06

• NetPower NPW1000 Line-Interactive UPS

P/N: ANPW1K0AA3

• Additional accessories as shown in photos

Luminex 200, Luminex XYP Flow Cytometry System w/ PC & Monitor Lab

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on due to restriction regarding testing Class 3+ Lasers at our facility.

The pc powers on and has XPotent Luminex software installed.

Please note; There is no bottles included, and only 2/3 tubes.

Uterm Floor Standing Electric Kiln w/ Orton AutoFire Express Controller

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in working order, heating to 650ºc.

CTI-Cryogenics 9600 Compressor With Auto Transformer SKE 331-3

This system was removed from a university laboratory where it was surplus to requirements.

The CTI-Cryogenics 9600 helium compressor is supplied with an SKE 331-3 auto transformer, used to step down a 440V US 3-phase input to 220V suitable for the compressor.

The compressor features a dropped phase detector and will not operate unless all three input phases are present and correctly aligned. A cold head is required for operation (not included) and can be sourced separately. Replacement of the compressor adsorber is recommended as part of routine servicing.

 The helium loop is still pressurised, and so is unlikely to have been contaminated

This system must be installed and wired by a qualified electrician. The unit was confirmed to be working prior to removal, but needs wiring up.

Includes:

• CTI-Cryogenics 9600 Compressor
• Auto Transformer SKE 331-3

New Wave Research Model UP-213 with Tempest 20Hz Laser Ablation System Lab

This system was removed from a facility where it was surplus to requirement.

The unit is in good cosmetic condition. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.

The previous owner stated it was in working order when it was last in use.

Includes;

• New Wave Research Model UP-213 with Tempest 20Hz Laser
• PC, Monitor, Keyboard & Mouse
• Spare Tubing
• Coaxial Cables
• VGA Cable

Thermo Scientific Heraeus Multifuge X3R Centrifuge Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: There is no rotor included.

Emscope Sputter Coater SC500 System w/ Emscope 20004A Pump Lab

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Thermo Scientific Spinnaker Robotic Arm F01981 Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition, but we are unable to test it as it requires a connection to the full system to operate.

This item also includes the following:

• Emergency Stop Button
• MicroPlate Mount

GE AKTA Purifier 10 FPLC System – P-900, UPC-900, Box-900, M-925, PV-908, INV-907

This item was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition and in good working order.

Please note: It is missing tubing and the CU950 interface module for PC connectivity.

Included components:

GE AKTA P-900 Pump

• Model: P-900
• Serial No.: 1358382
• Code No.: 18110856

GE AKTA UPC-900 Detector

• Model: UPC-900
• Serial No.: 1359309
• Code No.: 18112895

GE AKTA Box-900

• Model: Box-900
• Serial No.: N/A

GE AKTA M-925 Mixer

• Model: M-925
• Serial No.: N/A

GE AKTA PV-908 Valve

• Model: INV-908
• Serial No.: 1352513

GE AKTA INV-907 Valve

• Model: INV-907
• Serial No.: 1355914

Peak Scientific Nitrogen Gas Generator N300DR

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered up with the compressor running, we are unable to test it further at our facility.

This system was removed from a lab as it was no longer required.

It was in full working order prior to removal from the lab.

An engineer from Pacific Biosciences prepared the system for removal from the lab, including removing all the systems cladding, but unfortunately had to cut a few cables between the main unit and the environmental chamber.

Whilst the blade server is included with the system, it has been wiped, so software may need reinstalling if you intend to use the system in full again.

Strangely the information plate on the back of the unit just says 'PacBio RS' and not 'PacBio RS II' as would be expected, but the lab called it an RS II, and the cladding on the front says RS II, so we presume this is RS II.

The engineer said that whilst getting the unit up and running again might be difficult, there is an enormous value of the system in parts. Apparently the camera part alone cost £125k.

We have not removed any parts from the system whatsoever.

This autoclave was removed from a university lab as surplus to requirements.

We were assured the unit was in good working order when last used, but was no longer required by the lab.

At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used.

Type:B-QCS-54260

To:BS.2646

Capacity:200

Maxpressure:25

Serial No:2845

Date:9-1-06

Litres:2006

Test Pressure:394

Max Filling mass:100kg

Intended use:Sterilise

Product group:2

Design temp:150 degrees c

Max Temp: 138 degrees c

Min Temp: N/A

Voltage: V00 50/60 8KW

Gilson 268 PIPETMAX Automated Pipetting System (MAX8x200) with Dell Tablet & Dock

This system was removed from a facility where it was surplus to requirements.

The robot is able to run a full protocol successfully and appears to be in working order.

Please note: the Dell Latitude 10 tablet is in poor condition. The screen is badly damaged but remains usable, and the battery is dead, so the tablet must be used while connected to the docking station.

• Pipetting Head: MAX8x200

No further testing has been carried out at our facility.

Included Components:

• Gilson 268 PIPETMAX liquid handler with MAX8x200 pipetting head
• Dell Latitude 10 (ST2e) tablet (Trilution installed; screen damaged; battery dead)
• Dell Latitude 10 docking station + PSU
• PSU for the PIPETMAX
• 2 x USB cables
• Gilson 32000274 bin, tip disposal (annealed)
• PIPETMAX tip reload block
• 96x new PIPETMAX tips
• Paperwork incl. Declaration of Conformity + Certification of Validation (software)
• PIPETMAX 268 setup guide

Foster + Freeman MVC3000 Fuming Cabinet

This item was removed from a university lab where it was surplus to requirements.

The cabinet powers on and is in reasonable cosmetic condition. Upon powering up, the cabinet initiates a 5-minute Mini Purge, after which the electronic door can be opened. However, the system displays a 'Filter Fault' status after startup, indicating a missing filter.

Therefore, further testing could not be conducted.

There is no filter fitted, the unit should work fine with one in.

Specifications:

• 1 Shelf: 74 x 58 cm
• 2 Baskets: 57 x 30 x 15 cm
• Underneath space: 75 x 64 x 32 cm

Model: MVC3000

Serial No: 3175

Life Technologies Ion Torrent System - Proton Semiconductor Sequencer & Ion Chef

This system was removed from a university where it was surplus to requirements.

All included units are in good cosmetic condition and power on, we are unable to test them further or as a system at our facility.

The previous owner stated it was in working order when last in use.

System includes;

Ion Torrent Proton Semiconductor Sequencer

• Model - Proton Semiconductor Sequencer
• S/N - 245644-0717

Comes with Ion Torrent P1 - DA003572

Ion Torrent Ion Chef Instrument

• Model - IONCHEF
• S/N - CHEF00212

Ion Torrent Ion OneTouch 2

• Model - Ion OneTouch 2 Instrument
• S/N - 2456450-2447

Ion Torrent Ion Touch ES

• Model - 8441-21
• S/N - 423928

Ion Torrent Ion Chip Minifuge

• Model - Ion Torrent Ion Chip Minifuge
• S/N - 1212 0929

Accessories

• Dell PowerEdge T620 Server
• 3 x wash bottles
• Honeywell Scanner
• 2 x Ion Chip 316

Cytiva Xcellerex XDR-10 MASTER MAX Benchtop Bioreactor System

This system was removed from a facility where it was surplus to requirements.

All components are in good used cosmetic condition.

The system comprises a benchtop bioreactor controller, vessel, weighing platform, and data recording unit, supplied with a manual.

Includes:

• Cytiva Xcellerex XDR-10 MASTER MAX Benchtop Bioreactor Controller
• Cytiva Xcellerex XDR-10
• Mettler Toledo PBA655-B60 Weighing Platform
• JUMO Logoscreen 600
• Manual

In good used cosmetic condition.

The lab confirmed that the system was in good working order prior to removal.

Wyatt Technology DynaPro DP-TH-01 Titan & DP-AMB-01 Microsampler

This system was removed from a university lab where it was surplus to requirements.

Both units are in good cosmetic condition and power up.

However, full functionality testing requires connecting to a PC with specific software, which is not included.

The previous owner has stated it was in good working order prior to removal.

Includes:

• USB cable
• DVI cable

Model Numbers:

• Titan: DP-TH-01
• Serial Number: 111-DPTH
• Laser Power (mW): 60
• Wavelength (nm): 828.98

• Microsampler: DP-AMB-01
• Serial Number: 104-DPAMB

Holmarc Opto-Mechatronics Spray Pyrolysis Equipment Model HO-TH-04N

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on, and the heated plate was successfully tested, reaching a maximum temperature of 500˚C. No further functional testing was conducted.

In reasonable cosmetic condition, with some tape residue present around the casing.

Includes:

• Integrated Holmarc Spray Pyrolysis Controller
• Serial No.: HSMC104
• (Powers on via internal socket)
• Airsa Model AFP11-3D Fan (not fitted)
• Metal part labelled 'Container' (connects to left side of unit)
• Glass chamber with pump fittings (rust present on metal parts)
• Blue hosing

Model: HO-TH-04N

MVE TEC 3000 800 Series -190°C Cryogenic Freezer with Controller

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. No further testing was possible as it requires liquid nitrogen to operate.

Includes:

• Step access platform
• MVE TEC 3000 guidance manual
• 12 x internal storage racks (each approximately 14 cm (L) x 14 cm (W) x 87 cm (H))

Model: TEC 3000

Temperature Range: Down to -190°C

Priorclave PS/MID/C60 Top-Loading Autoclave

This autoclave was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition. The previous owner has stated it was in good working order prior to removal.

Includes:

• Key

Thermo S4 S Series AA Spectrometer System, with VP 100 and ASX-520

This was removed from a university lab where it was surplus to requirement.

All elements of the system power up and are in reasonably good cosmetic condition with minor marks. The lab confirmed it was in working order when last used.

Included are;

1x Thermo S Series AA Spectrometer

P/N: 9423 400 30041

S/N: GE711747

1x Thermo VP 100 Vapour System

P/N: 9423 460 10001

S/N: GE 604091

1x Cetac ASX-520 Auto Sampler

S/N: 100520A520

This system was removed from a university lab where it was surplus to requirements.

All modules power up but have not been tested further. We are told it was working prior to removal.

4 PCs are included, but have had their hard drives removed for GDPR reasons. The PCs have been left with he system as they may contain required Pci cards.

It is in good cosmetic condition with minor marks.

Sequenom Samsung MassARRAY Nanodispenser

SN - 31-0142-F2

Bruker Agena Bioscience

Type - MT Analyzer

SN - BA060636

Sequenom Matrix

Model - PlateMate 2X2

SN - 301-9-234

Comes with Controller - Looks never used as is still sealed

2 x Matrix ControlMate Software Discs V1.0.11

Other bits:-

APC Back-UPS R S 1000 - Powers on

Sequenom Box of old chips for volume checks

Grey Case for Matrix PlateMate Plus/PM 2X2 30ul 96 Pipetting Head (Case is empty)

2 x 5000ml Simax Glass Bottles

Wash Tank with Probe

BDH Black Container

2 x Nalgene Waste/Supply Containers

40L Feed Tank with Probe

40L Waste Tank with Probe

Tubing

Small box labelled Gasket kit with 2 x Green Gaskets inside

Pfeiffer Vacuum Compact Cold Cathode Gauge PTR25500 (Not sure if this is related)

Box labelled Sequenom Parts includes:-

Shipping bracket

Plates

Power cable

MassARRAY Nanodispenser Floppy disk SN - B1-0142-F2

Various PC cables (VGA etc.)

This Perkin Elmer TurboMatrix 40 Headspace Sampler was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition and powered up.

When powered up, the item ran a sampling method that displayed the motor in good working order, we are unable to test this item further at our facility.

Thermo S4 Atomic Absorption Spectrometer Package w/ Bulbs Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on but could not be tested further.

It is in good cosmetic condition, however, 3 out of 6 plastic clips for the bulbs snapped.

Includes:

• Operators manual
• Various parts and accessories
• Various bulbs:
• Thermo K 8mA
• Thermo NaK 8mA
• Thermo Mn/Nl/Fe 10mA
• Thermo Cu/Mn/Zn 10mA
• Thermo Na 8mA
• Thermo Ca/Mg/Si 15mA
• Thermo P 10mA
• Visimax I Hollow Cathode Lamps Cd
• Visimax I Hollow Cathode Lamps Cr/Fe/Mn/Ni
• Visimax I Hollow Cathode Lamps Ca/Mg/Al
• Instrumentation Laboratory SEN 1.6 20632-02
• Instrumentation Laboratory Zn 87267
• Instrumentation Laboratory Ca/Mg 87297
• Instrumentation Laboratory Fe 87225
• Instrumentation Laboratory Ni 87235
• Instrumentation Laboratory Mn 87231
• Instrumentation Laboratory Mo 87233
• Instrumentation Laboratory Fb 87227

Finetech Fineplacer w/ FW1 and Leica Monozoom 7 Camera Accessory

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further as the power supply is not included.

Luminex Magpix Microplate Reader w/ Software & Manuals Lab

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in good working order prior to removal.

Includes;

Accessories

• 2 x 8x9 well plate
• 1 x DataLogic Gryphon
• 1 x Datashur USB 32Gb (Password locked)

Software

• 1 x Luminex xPONENT 4.2 Software for MAGPIX
• 2 x Luminex MAGPIX Verification Kit
• 1 x Luminex MAGPIX Calibration Kit
• 3 x Luminex MAGPIX Verification Kit (Mini CD)
• 1 x Luminex MAGPIX Calibration Kit (Mini CD)

Manuals

• Luminex xPONENT for MAGPIX 4.2 Software User Manual
• Luminex xPONENT for MAGPIX Quick Guide

Mettler Toledo Garvens 2 VS Checkweigher

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

GE Healthcare ÄKTA System with Workstation and Software

This system was removed from a university laboratory where it was surplus to requirements.

All units are in good cosmetic condition and power on, we are unable to test the system further at our facility.

The Lenovo Thinkstation PC has Unicorn 5.01 and MassLynx V4.2 software installed and functioning correctly.

The system comprises the following:

Amersham Biosciences UV-900

Model: UV-900

Serial No.: 01148619

Amersham Biosciences P-900

Model: P-900

Serial No.: 01146904

Amersham Biosciences INV-907

Code No.: 18-1108-40

Serial No.: 01147887

Amersham Biosciences M-925

Code No.: 18-1118-89

Serial No.: 01146475

Amersham Biosciences CU-950

Serial No.: 2448

Lenovo Thinkstation PC with:

Unicorn 5.01

MassLynx V4.2

Keys included

NEC 17" Monitor

NEC Keyboard and Mouse

Amersham Biosciences pH/C-900 Monitor (Passed calibration)

Melles Griot Anti-Vibration Isolation Table with 4 Isolating Legs Lx244 Wx126 Hx91

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition and remains untested.

Includes:

• 4 x Melles Griot Isolating Legs, Part No. 070T1055

Specifications:

• Dimensions: Lx244 Wx126 Hx91 cm
• Measurement: Imperial

Please note: Sockets and 3-phase cable/plug shown in the first two images are not fitted or included.

Cryomagnetics Inc 12T Horizontal Superconducting Magnet with CS-4 & LM-500

This system was removed from a university laboratory where it was surplus to requirements.

It is a 12T horizontal superconducting magnet with a 120mm diameter bore. The magnet features a high homogeneity central region, previously used for FT-ICR mass spectrometry measurements, and is also suitable for small-scale MRI applications. It is actively shielded with a low fringe field and incorporates a liquid helium cooled coil with an outer liquid nitrogen shield dewar.

The previous owner stated it is in full working order. The system has been refilled and maintained continuously over its lifetime with no issues and no quenches outside of training during charging.

Please note; The weight (2500kg) is approximate.

Includes:

• Magnet, discharged state (run down in 2023), flushed with nitrogen gas
• Manufactured ~2009, installed at university by Cryomagnetics soon after
• Run down and moved once in ~2010
• Insulation under vacuum
• All seals and burst discs intact and ready to use
• Instruction manual (paper)
• Cryomagnetics Inc Model CS-4 Bipolar Superconducting Magnet Power Supply 115v (Serial No: 3166)
• Cryomagnetics Model 4G Superconducting Magnet Power Supply Operating Instruction Manual for the 4G Magnet Power Supply
• Cryomagnetics Inc Liquid Cryogen Level Monitor Model LM-500 (Serial No: 3742)

Large VacGen Vacuum Tank & Beam Tube with VAT Gate Valves.

This was removed from a university where it was surplus to requirements.

The lab confirmed that all the equipment is in excellent functional condition and has been housed in a clean room lab for the full lifetime.

Tank Dimensions: L 136cm x W 126cm x H 260cm.

Tank is fitted with 6 openings.

3 x 65cm x 65cm.

2 x 10cm x 10cm.

1 x 15cm x 15cm.

Beam Tube Dimensions: L 450cm x W 81cm x H 81cm.

Opening 65cm x 65cm.

2 x Gate Dimensions: L 100cm x W 24cm x H 183cm.

Opening 65cm x 65cm.

Fitted with SMC Solenoid valves Model: VF3143.

Three studs have been snapped off in one of the Gate valves.

Photon Technology International EasyLife LS Fluorescence Lifetime System Lab

This was removed from a university lab where it was surplus to requirements.

We have powered everything up but have not tested it further at our facility. The lab confirmed it was working prior to removal.

The system includes the following :

PTI BryteBox

Part No - 30-102528

S/N - 1394

EasyLife LS Fluorescence Lifetime System

S/N 1003-EL

PTI Master S/N - 2513

PTI XenoFlash PSU

S/N - 1906-XPS2

Gold PSU

5 X Class 1 LED Product

310 nm, 440 nm, 505 nm, 525 nm, 635 nm

OPTIPLEX 330

S/N - HXK2X3J

Model No. - DCNE

Operating System - Windows XP Version 2002

We have the passwords available upon purchase

It also comes with HP Monitor, Keyboard and Mouse

Olympus Lext OLS3100 Confocal Microscope w/ MM6-ASPS Controller & OLS3000 PSU

This was removed from a university lab where it was surplus to requirements.

The lab it was removed from confirmed it was in working order prior to removal but were unable to supply the software.

All parts power on and appear to be in working condition. The control unit and emergency stop button are working correctly. The stage control appears to be working correctly with a smooth motor. Only the cables shown are included.

The system is in good cosmetic condition, but the rubber foot ends are crumbling.

There is no software included with the system.

Items included:

Main Units:

Olympus Lext OLS3100

Dimensions: 464(W)x559(D)x620(H)mm

Weight: 56.5kg

Olympus MM6-ASPS Controller

Dimensions: 381(W)x304.8(D)254(H)mm

Weight: 14.33kg

Olympus OLS3000 Power Supply

Dimensions: 355.6(W)x177.8(D)355.6(H)mm

Weight: 9kg

Accessories:

Olympus U-DICR

Olympus U-P03

Olympus U-AN360-3

Optocell Technology CuBiAn XC Fully Automated Clinical Chemistry Analyser

This was removed from a university lab where it was surplus to requirements.

The unit powers up and all passwords have been reset. These will be released on purchase. It initialises well and operates as it should.

It is in good cosmetic condition with minor marks.