All Products

£ 4,000.00 (ex. VAT) 1 in stock

Jenway 6705 UV/Vis Spectrophotometer Lab

ITEM-44406

Jenway 6705 UV/Vis. Spectrophotometer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition other than some stress cracks present on the screen protector. This does not impair its functionality.

This item powers on and passes all self-diagnostic tests on start-up. The previous client stated it was in good working order prior to removal.

£ 4,000.00 (ex. VAT) 1 in stock

Illumina MiSeq Benchtop Gene Sequencer 2015 Lab

ITEM-47141

Illumina MiSeq Benchtop Gene Sequencer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in working order.

The previous owner has stated it was in working order prior to removal.

Software installed: MiSeq Control Software 4.1.0.656

£ 4,000.00 (ex. VAT) 1 in stock

Redd & Whyte Preddator Liquid Robotic Handler Lab - No Software Included

ITEM-42833

Redd & Whyte Preddator Liquid Robotic Handler

This system was removed from a facility where it was surplus to requirements.

It is in excellent cosmetic condition. No further testing has been carried out, however, the previous owner confirmed it was working when last used.

Please note; Laptop and software are not included.

Includes:

Redd & Whyte Preddator Liquid Robotic Handler
1 x Data cable
1 x 1.5 metre plastic tubing

Serial No.: 1040

Model No.: [Not specified]

£ 4,000.00 (ex. VAT) 1 in stock

10x Genomics Chromium Controller for Single Cell Assays Lab

ITEM-41724

10x Genomics Chromium Controller for Single Cell Assays

This is being sold on behalf of a university client.

It is in good working order and is in good cosmetic condition with minor marks. The client simply upgraded to a newer unit.

The unit is available for collection from Cambridge.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 4,000.00 (ex. VAT) 1 in stock

Shimadzu GC-2014 Gas Chromatograph w/ LabSolutions GCsolution Software Lab

ITEM-43126

Shimadzu GC-2014 Gas Chromatograph with LabSolutions GCsolution Software

This system was removed from a facility where it was surplus to requirements.

The unit is in good cosmetic condition and powers on. The previous owner advised that it was in working order prior to removal.

It is fitted with 2 × FID detectors, gas sampling valves, and a packed column adapter.

Software Included:

LabSolutions GCsolution

Release: 2.31

Model: GCsolution

Cat No: 223-07370

S/N: C51744600344

Model: GC-2014

£ 4,000.00 (ex. VAT) 1 in stock

Shimadzu GC-2014 Gas Chromatograph Lab

ITEM-45025

Shimadzu GC-2014 Gas Chromatograph

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on, but there is no software included.

Therefore, we are unable to conduct further testing.

The lab confirmed it was in working order prior to removal, but were unable to provide the PCs and Software.

Includes:

Manual
Users manual on disc
LabSolutions GC Solution release 2.30

Specifications:

Model: GC-2014
Serial No.: C11484301470

£ 4,000.00 (ex. VAT) 1 in stock

Shimadzu GC-2014 Gas Chromatograph Lab

ITEM-45026

Shimadzu GC-2014 Gas Chromatograph

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on, but there is no software included.

Therefore, we are unable to conduct further testing.

The lab confirmed it was in working order prior to removal, but were unable to provide the PCs and Software.

Includes:

GC-2014 Gas Chromatograph User’s Manual
Needles
Operation Manual
SGE Inlet Liners
Restek Septa
Hamilton Syringe

Specifications:

Model: GC-2014
Serial No.: C11484301470

£ 4,000.00 (ex. VAT) 1 in stock

Perkin Elmer ProXPRESS 2D Proteomic Imaging System Lab

ITEM-41352

Perkin Elmer ProXPRESS 2D Proteomic Imaging System Lab

This system was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on.

The previous owner has notified us that this system is in full working order.

This system includes the following:

Pharmacia LKB VacuGene Pump
ProXPRESS 2D User's Guide
ProXpress Test Sheets
2950-2017 Gell Cassette Assy
2950-2019 UV Gel Adaptor (Sealed)
2950-2048 Calibration Sample Assy
PX2950-2006
2950-2049 Standard Wet Gel Cassette Assy
Phoretix Software
Proteome 1D Analyser Software and manual

$Image of Rigaku Ultima III X-ray Diffractometer (XRD) w/SA-HEM3 6 Station Holder Lab$

£ 4,000.00 (ex. VAT) 1 in stock

Rigaku Ultima III X-ray Diffractometer (XRD) w/SA-HEM3 6 Station Holder Lab

ITEM-44950

Rigaku X-ray Diffractometer (XRD) Ultima III

This system was removed from a university lab where it was surplus to requirements.

The system is in reasonable used cosmetic condition. It has not been powered on at our site due to our on-site risk assessments surrounded X-Rays.

The unit was working when put into storage in 2018.

Various components and parts are included as listed below, along with a PC setup, although no Rigaku software programs appear to be installed on the PC.

However, there are the following software disks included:

Rigaku Basic Software (Cat No.: 9240J101)
Rigaku TTRAX3 and Ultima3 Software (Cat No.: 9240J101)
Rigaku Special Order Software (U30megaP) (Cat No.: 9999)

System Specifications:

Model: Ultima III
Cat No.: 2035M410
Serial No.: DD3654N

6 Station Holder
Model: SA-HEM3
Cat No.: 4057J101
Serial No.: 00563702

Patlite Beacon
Model: LMS-L (SN-06X03M)

Rigaku DC Motor Controller
SN: DD12866

Rigaku Long Fine Focus
Type: R01-29-0202
NC: 9430 022 73201
No. DK 402688

Rigaku CBO Cross Beam Optics
Cat No.: 2220B101
SN: DD12793

Additional Rigaku parts:

Cat No.: 5738E402 (SN-DD061813)
Cat No.: 2155G101 (SN-DD12804)
Cat No.: 4601K831 (SN-DD12154)
Cat No.: 4253A101 (SN-DD11586

Vexta Stopping Motor
Model: PK543-A
SN: UR70J32307

PC Setup:

Dell Optiplex 9020 with monitor, keyboard, and mouse
The PC is in working order with all passwords cleared. It contains a few Rigaku files, but no software programs appear to be installed.

Included Manuals/Software:

2 x Rigaku D/MAX 2000/PC Series Instruction Manual
X-Ray Diffractometer Instruction Manual
Rigaku Basic Software (Cat No.: 9240J101)
Rigaku TTRAX3 and Ultima3 Software (Cat No.: 9240J101)
Rigaku Special Order Software (U30megaP) (Cat No.: 9999)

Loose spare parts included:

Rigaku Cat No.: 2701E201 (SN-AD08851)
Container of round parts: Rigaku 900003 SH, w/Groove
2 x Small containers with unknown parts
Scintag Generator Key
Key labeled: "Microscope"
Container of small metals, including:
1 x Bag labeled "Silicon"
1 x 640d Silicon Powder
2 x Tubs UCAR Spectroscopic Powder
1 x Tub labeled "Tung Flake"
Approximately 20 x small containers of Silicon metal

£ 4,000.00 (ex. VAT) 1 in stock

Bioquell Clarus L2 Vaporised Hydrogen Peroxide Mobile Sterilising Unit Lab

ITEM-50454

BIOQUELL Clarus L2 Vaporised Hydrogen Peroxide Mobile Sterilising Unit Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The previous owner stated it was in working order prior to removal.

£ 4,000.00 (ex. VAT) 1 in stock

Waters Alliance HPLC System 2695 Separations Module, 1515 IP, 2487 Dual

ITEM-50834

Waters Alliance HPLC System 2695 Separations Module, 1515 IP, 2487 Dual

This system was removed from a facility where it was surplus to requirements.

All components are in good cosmetic condition with typical signs of previous laboratory use. The system powers on, however we are unable to test it further at our facility.

System Components

Waters 2695 Separations Module
Model: WAT270886
Serial Number: H07SM7214A

Waters 1515 Isocratic HPLC Pump
Model: 186001515
Serial Number: J0515P 230M

Waters 2487 Dual λ Absorbance Detector
Model: WAT081110
Serial Number: L05487 056M

Waters TC2 Temperature Control Module II
Serial Number: H05TC2 656E

£ 4,000.00 (ex. VAT) 1 in stock

Gilden Photonics fluoroSENS Fluorimeter w/ Sens-J1 Microplate Reader Lab

ITEM-46260

Gilden Photonics fluoroSENS Fluorimeter w/ Sens-J1 Microplate Reader Lab

This system was removed from a university lab where it was surplus to requirement.

Both units are in good cosmetic condition, the FluoroSENS Gilden Photonics powers on, we are unable to test it further at our facility.

The Sens-J1 has not been tested, as it requires connecting to a PC with relevant software.

This system also includes the required manual/

£ 4,000.00 (ex. VAT) 1 in stock

Thermo Scientific Easy-Nano LC 1000 UHPLC Chromatography w/ Accessories

ITEM-51399

Thermo Scientific Easy-Nano LC 1000 UHPLC Chromatography

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note; It is missing the side access panel.

Includes;

Thermo Scientific Easy Spray - Mfc.date: 2012
P/N: ES081

8 x Nano vip-er boxes with varying cables/wires/adapters.
1 x Viper cap
1 x Acclaim PepMap RSLC
1 x 350 microLitre mixer kit
1 x large box containing various accesseries.

£ 4,000.00 (ex. VAT) 1 in stock

Synentec NyOne Cell Imager Lab

ITEM-48302

Synentec NyOne Cell Imager Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, unable to test further as it requires connection directly to a PC to operate.

The lab confirmed it was in good working order prior to removal.

RECERTIFIED ITEM

£ 3,990.00 (ex. VAT) 1 in stock

Thermo Scientific MSC 1.2 Class II Safety Cabinet Lab

ITEM-50815

Thermo Scientific MSC 1.2 Class II Safety Cabinet Lab

This item was removed from a facility where it was surplus to requirement.

It is very good cosmetic condition and in good working order.

Last Service Date: Feb 2025

External dimensions (W × D × H): 1,380 mm × 795 mm × 1,460 mm
Internal work area dimensions (W × D × H): 1,200 mm × 600 mm × 780 mm
Working height (recommended work surface height from floor, on stand): 900 mm

£ 3,800.00 (ex. VAT) 1 in stock

Nikon Eclipse TE300 Inverted Fluorescence Microscope System w/ 20x/0.50 Ph1 Lab

ITEM-36255

Nikon Eclipse TE300 Inverted Fluorescence Microscope System Lab

This was removed from a university lab where it was surplus to requirements.

This system is in good cosmetic condition with all included units in working order.

1 x Nikon Eclipse TE300 body fitted with:

1 x Nikon 065851 multi position binocular neck.

1 x Nikon manual stage.

1 x Nikon filter holder, no filters fitted.

1 x Nikon Condenser Turret fitted with 1 x LWD ∞ Ph3 & 1 x Blanking plate.

The other 3 blanking plates are missing.

1 x Nikon LWD 0.52

2 x Nikon CFI 10x/22 eyepieces.

1 x Nikon Plan Flour

20x/0.50

Ph1 DLL

Objective.

1 x Nikon LHS-H100P-1 Halogen 12v 100w Lamp.

1 x Nikon TE-PSE100 Power supply with control cable.

1 x Nikon LH-M100C-1 Mercury 100w Lamp. (Run hours not known, bulb will require replacement).

1 x Nikon C-SHG1 Power Supply. (Run time counter reset).

RECERTIFIED ITEM

£ 3,800.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 6000 SHKE6000-1CE Shaking Incubator

ITEM-48772

Thermo Scientific MaxQ 6000 SHKE6000-1CE Shaking Incubator

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

The unit has been converted from a non-refrigerated model to a refrigerated model and then back again, which explains some of the cosmetic eccentricities.

It is in good cosmetic condition.

RECERTIFIED ITEM

£ 3,800.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 6000 Incubator Shaker SHKE6000-1CE Lab

ITEM-31545

Thermo Scientific MaxQ 6000 Incubator Shaker SHKE6000-1CE

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been extensively tested. It is in full working order.

It is in good cosmetic condition with minor marks.

This is the non-refrigerated model of this incubator.

£ 3,550.00 (ex. VAT) 1 in stock

New Brunswick Scientific Ultra Low Temperature Chest Freezer Model C760-86 Lab

ITEM-47537

New Brunswick Scientific Ultra Low Temperature Freezer -80C Model C760-86 Lab

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and in good working order.

£ 3,550.00 (ex. VAT) 1 in stock

Biotage TurboVap II Sample Evaporator & 10x 200ml Biotage Tubes Lab

ITEM-51367

Biotage TurboVap II Sample Evaporator & 10x 200ml Biotage Tubes Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

£ 3,500.00 (ex. VAT) 1 in stock

Priorclave Benchtop Autoclave PS/MVA/C40 with Tactrol 2 Display

ITEM-52578

Priorclave Tactrol 2 Autoclave

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 27/6/24

£ 3,500.00 (ex. VAT) 1 in stock

DakoCytomation CyAn ADP Flow Cytometer with Fluids cart & PC w/ Software Lab

ITEM-47164

DakoCytomation CyAn ADP Flow Cytometer with Fluids Cart & PC

This system was removed from a university laboratory where it was surplus to requirements.

The main unit has not been powered on due to safety limitations at our facility with powering on Class III lasers.

However, the accompanying PC, fluids cart, and all listed peripherals power on without issue. The system remains in good cosmetic condition.

The previous owner has stated it was in working order prior to decommissioning.

Includes:

DakoCytomation CyAn ADP Flow Cytometer
Fluids cart/sheath management system
PC w/ Summit V4 Software
Samsung monitor
Keyboard
Mouse
1x Powervar ABCE800-22 Power Supply Unit

£ 3,500.00 (ex. VAT) 1 in stock

Cytiva Biacore X100 Surface Plasmon Resonance (SPR) System Lab

ITEM-48642

Cytiva Biacore X100 Surface Plasmon Resonance (SPR) System Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it requires a service and a needle replacement.

£ 3,500.00 (ex. VAT) 1 in stock

Perkin Elmer GC Gas Chromatograph Clarus 480 Lab

ITEM-46775

PerkinElmer Clarus 480 GC Gas Chromatograph

This item was removed from a university laboratory where it was surplus to requirements.

It powers on but has not been tested further. The unit is in reasonably good cosmetic condition.

Includes:

Main Clarus 480 unit only (no additional accessories or software included)

£ 3,500.00 (ex. VAT) 1 in stock

DYNO-MILL Type KDL Bead Mill Lab

ITEM-46792

DYNO-MILL Type KDL Bead Mill

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and appears to be in working condition. The unit is in a reasonable, used cosmetic condition.

Includes:

User manual

£ 3,500.00 (ex. VAT) 1 in stock

HPC Laser Model: RC2412 Laserscript Table CNC Router Lab

ITEM-38191

HPC Laser Model: RC2412 Laserscript Table Router Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order.

This item also includes:

1 x Control Panel.

1 x MPC6620 controller.

1 x MPC6620 User Manual. (V1.0) July 2013.

Item Dimensions:

L 300 cm x W 170 cm x H 137 cm.

Weight: 356 kg

£ 3,500.00 (ex. VAT) 1 in stock

Pair of Sport System Hydroplay Official S04106 Competition Basketball Goals

ITEM-45643

Pair of Sport System Hydroplay Official S04106 Competition Basketball Goals

These Competition Basketball Goals are sold on behalf of a University in Scotland.

The previous client has notified us that these items are in very good condition with little use.

This mobile basketball system features two mobile and two stationary wheels that retract or extend when the unit is lifted or lowered. It includes a 15 cm thick shield covered with synthetic, washable material and tempered safety glass boards with protected lower edges.

The complete system weighs approximately 1050 kg and includes:

Two tempered safety glass boards (180x105 cm, 12 mm thick) with edge covers
Two basketball rings with nets
Rear plates for anchoring to the floor

Specifications:

Projection: 325 cm
Required setting length: 425 cm
Dimensions when folded: 410x185x170 cm

The system complies with FIBA standards (Level 1).

This item will require collection from: UHI Perth, located in Perth, Scotland.

These can either be sold as a pair or individually.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 3,500.00 (ex. VAT) 1 in stock

1958 Commer Karrier Gamecock Fire Engine Food Pizza Truck Conversion

ITEM-41735

1958 Commer Karrier Gamecock Fire Engine Food Truck Conversion

The vehicle is a non-runner and has been parked up for the last 24 months. It has been converted into a food truck and is installed with a pizza oven and other catering equipment.

Details on the issues are listed below;

Issue: A valve failure has occurred due to a gas conversion that was done on this truck. The gas conversion was not in use but remained connected to the combustion chamber, leading to the valve failure.

Actions if Required: Repair of the valve train and removal of gas conversion, these vehicles were not made for such conversions. It would require a new head gasket and accessories to go along with the head removal and replace affected valves without a full inspection to the engine I think that the minimal requirement to have a running truck again. These kind of repairs can only be carried out by a specialist.

Pizza oven dimensions are:

Opening is 53cm x Internal Width is 100cm x Depth is 120cm x Opening Height is 26cm.

The water urn wiring has been disconnected from the unit, as has the water bath.

Vehicle Details as per DVLA website:

Vehicle make KARRIER

Date of first registration: July 1958

Year of manufacture: 1958

Cylinder capacity: Not available

CO₂ emissions: Not available

Fuel type: PETROL

Euro status: Not available

Real Driving Emissions (RDE): Not available

Export marker: No

Vehicle status: Taxed

Vehicle colour: SILVER

Vehicle type approval: Not available

Wheelplan: 2 AXLE RIGID BODY

Revenue weight: Not available

Date of last V5C (logbook) issued: 3 February 2023

It is available for collection only from Lochmaben UK

£ 3,500.00 (ex. VAT) 1 in stock

Gilson Pipettes – 42 Units (6 Stands of 7) Adjustable Volume P2–P5000

ITEM-54607

Gilson Pipettes – 42 Units (6 Stands of 7) Adjustable Volume P2–P5000

This equipment is being offered for sale on behalf of a client due to being surplus to requirements.

This lot consists of 42 Gilson adjustable-volume, single-channel pipettes supplied across 6 complete stands (7 pipettes per stand). The set covers a full range of commonly used volumes including P2, P10, P20, P100, P200, P1000, and P5000, making it suitable for a wide range of laboratory applications including molecular biology, chemistry, and general lab workflows.

Gilson pipettes are widely regarded for their precision, durability, and reproducibility, making them a standard choice in research, clinical, and industrial laboratory environments.

According to the client, all pipettes are in good used condition and have been well maintained. Please note that the pipettes are not currently calibrated, and buyers should factor calibration into commissioning prior to use where required.

Included in sale:

42 × Gilson single-channel pipettes
Volume ranges included: P2, P10, P20, P100, P200, P1000, P5000

6 × pipette stands (each holding 7 pipettes)

Please note, any additional accessories, services or documentation not specifically listed above are not included.

The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

£ 3,500.00 (ex. VAT) 1 in stock

Millipore Mobius FlexReady System CL-2 POD - MPODPILOT - MBSCB002D

ITEM-35826

Millipore Mobius FlexReady System CL-2 POD - MPODPILOT - MBSCB002D

This was removed from a university lab where it was surplus to requirements.

Millipore Mobius FlexReady System CL-2 POD Cart with Drawer

Model: MPODPILOT

Cat#: MBSCB002D

Serial#: F4DA03789

Year: 2014

The unit is in excellent cosmetic condition but has not been tested.

£ 3,500.00 (ex. VAT) 1 in stock

CAMAG Automatic TLC Sampler 4 with PC and winCATS Software Lab

ITEM-49701

CAMAG Automatic TLC Sampler 4 with PC and winCATS Software Lab

This system was removed from a facility where it was surplus to requirement.

£ 3,500.00 (ex. VAT) 1 in stock

Perkin Elmer AAnalyst 200 Atomic Absorption Spectrometer Lab

ITEM-49978

Perkin Elmer AAnalyst 200 Atomic Absorption Spectrometer Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 3,500.00 (ex. VAT) 1 in stock

Bigneat Robotics Enclosure Cabinet Class 2 RB3200/01 Lab

ITEM-42797

Bigneat Robotics Enclosure Cabinet RB3200/01

This item was removed from a university laboratory where it was surplus to requirements.

It is in very good cosmetic condition and in good working order.

Please Note; This item will require reassembling and recommissioning once purchased.

Includes:

LAC2 Class II type airflow system
Integrated Ergotron PC and monitor arm
Eight fitted castors for mobility
Two lower storage compartments (110 x 100 x 57cm each)
Opening window aperture (218 x 110cm) for equipment access

Specifications:

Airflow: > 0.4m/s
Downflow air changes per hour: 0.25 - 0.5
External dimensions: 320 x 118 x 240cm (l x w x h)
Internal cabinet dimensions: 317 x 115 x 115cm (l x w x h)
Running hours since last service: 134.1

Model: RB3200/01

Serial No.: 66166/RB3200

Year: 2007

£ 3,500.00 (ex. VAT) 1 in stock

Wild Leitz Fluovert FU 090-128.017 Inverted Microscope w/ 2 x Objectives Ph

ITEM-48739

Wild Leitz GMBH Fluovert FU 090-128.017 Inverted Microscope w/ 2 x Objectives Ph

This item was removed from a university laboratory where it was surplus to requirements.

The microscope is in reasonable cosmetic condition, with a crack at the bottom of the unit.

It could not be fully tested as the power supply required for the lamp was not included.

Includes:

Leitz EF L 20/0.32 PHACO1 160/- objective (519436)
Leitz EF 10/0.25 PHACO1 160/- objective (519767)
Leitz 2 × Periplan GF 10x/18 M eyepieces
Carl Zeiss S-PL 10x/20 eyepiece

Model: FU 090-128.017

£ 3,500.00 (ex. VAT) 1 in stock

Edwards Model iQDP80 Dry Vacuum Pump Lab

ITEM-38003

Edwards iQDP80 Dry Vacuum Pump

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but we have been advised by the previous owner that it is not in working order, therefore, it is listed as Spares/Repair.

Serial No.: M109880

Model: 3XIQDP80

Manufacturing Date: 21.11.00

Power supply cable & control module not included.

£ 3,500.00 (ex. VAT) 1 in stock

Esco Labor Model EL3 Dual Agitated Vacuum Laboratory One-Pot Homogeniser

ITEM-50215

Esco Labor Model EL3 Dual Agitated Vacuum Laboratory One-Pot Homogeniser

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition. The unit cannot be powered on as the control panel is not included, and it has not been PAT tested for this reason. The previous owner stated that it was in working order prior to removal.

Model: EL3

£ 3,500.00 (ex. VAT) 1 in stock

Dionex HPLC System - UCI-100, PDA-100, RF 2000, TCC-100, P680A LPG-4 Lab

ITEM-24808

This Dionex HPLC System was removed from a university lab where it was surplus to requirements.

The system is in reasonable cosmetic condition, but some parts are heavily stained and have sustained minor surface damage.

All included units power up and have passed self-tests, we are unable to test them as a system at our facility.

Included with this system are the following:

1x Dionex Photodiode Array Detector

Model: PDA-100

P/N: 057060

1x Dionex RF 2000 Fluorescence Detector

S/N: C2095377023OUS

P/N: 5057.0020

1x Dionex Thermostatted Column Compartment TCC-100

S/N: 2850410

P/N: 5710.0000

1x Dionex UCI-100 Universal Chromatography Interface

S/N: 2620102

P/N: 5911.0010

1x P680A LPG-4 HPLC Pump

S/N: 2780421

P/N: 5030.0015

1x Solvent Rack SOR-100

S/N: 3060402

P/N: 5030.9200

£ 3,500.00 (ex. VAT) 1 in stock

Sorvall Discovery 100SE Ultracentrifuge - No Rotor Included Lab

ITEM-47424

Sorvall Discovery 100SE Ultracentrifuge - No Rotor Included Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

It was tested using a Sorvall A1256 rotor (Not included.)

£ 3,500.00 (ex. VAT) 1 in stock

Nikon Eclipse TI-S Microscope w/ Q Imaging QI Camera & TE-PSE30 Power Supply Lab

ITEM-45446

Nikon Eclipse TE300 Inverted Fluorescence Microscope

This item was removed from a university where it was surplus to requirements.

The microscope powers on and produced a clear slide image when tested with an in-house objective (not included).

It is in good cosmetic condition, however, the protective visor has snapped off. This does not affect its functionality.

Included:

Nikon Power Supply (Model: TE-PSE30, S/N: 4010214)
Q Imaging QI Click Camera (Model: 01-QIClick-F-M-12, S/N: Q28643)
2 x CFI 10X/22 Eyepieces

Specifications:

Model: TE300
S/N: 533589

£ 3,500.00 (ex. VAT) 1 in stock

Leica DMR Type 020-525.735 Fluorescence Microscope Lab

ITEM-41444

Leica DMR Type 020-525.735 Fluorescence Microscope Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on with the bottom-mounted lamp in good working order.

We are unable to test the top-mounted lamp as the required power supply is not included.

Includes with the microscope are the following:

Leica MPS 60 Camera
Leica ∞/0.17 C Plan 100x/1.25 Oil Objective
Leica ∞/-/A N Plan 5x/0.12 Objective
504058 Leica Illuminator
Leica 807-072.057 Lamp Module (damaged)
Box of misc tools and accessories

£ 3,500.00 (ex. VAT) 1 in stock

Julabo F1000 Recirculating Chiller Lab

ITEM-41568

Julabo F1000 Recirculating Cooler Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and has been fully tested. It is in good working order. (Thermometer used for testing not included).

It is in good cosmetic condition.

£ 3,500.00 (ex. VAT) 1 in stock

BioNex Nanodrop W/ NS-2 Stage & UVR-M Chamber System Lab

ITEM-48511

BioNex Nanodrop W/ NS-2 Stage & UVR-M Chamber System Lab

This system was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition, we are unable to test it further at our facility.

Includes:

UVR-M Chamber
Nanodrop
NS-2 Stage
2 x Honeywell Burdick and Jackson bottles
Gilson 11727IN Nanobuilder Software disk
Various cables
Various Nanodrop parts and accessories

£ 3,500.00 (ex. VAT) 1 in stock

Leybold Trivac D40B & RUvac WAU251 Vacuum System Lab

ITEM-34933

Leybold Trivac D40B & RUvac WAU251 Vacuum System

This item was removed from a university laboratory where it was surplus to requirements.

This item is a combination of Leybold Trivac D40B and RUVAC WAU251 3-phase vacuum pumps. According to the previous owner, both units are in working condition; however, no further testing has been conducted on-site.

Specifications:

Leybold RUVAC:

Type: WAU251
Catalog No.: 11721
Serial No.: B891200093

Leybold TRIVAC:

Type: D40B
Catalog No.: 112 86
Serial No.: A881100069

£ 3,500.00 (ex. VAT) 1 in stock

Knauer Blue Shadow Pump 40P HPLC Lab

ITEM-46325

Knauer BlueShadow Pump 40P HPLC Laboratory Pump

This item was removed from a facility where it was surplus to requirements.

It is in very good cosmetic condition and powers on. We are unable to test it further at our facility.

The power supply is included.

Technical Specifications

Pump Type: High-pressure dosing pump
Flow Rate Range: 0.001 – 10 mL/min
Flow Rate Increment: 0.001 mL/min
Maximum Flow Rate: 10 mL/min (with 10 mL pump head)
Maximum Pressure: 650 bar (65 MPa / 9430 psi)
Flow Rate Accuracy: ±1% (measured at 5–80% of flow range using ethanol)
Flow Rate Precision: <0.1% RSD
Pulsation: <2% amplitude (typically <1.3%) or <0.3 MPa (3 bar), whichever is greater, at 1 mL/min ethanol, at all pressures >1 MPa (10 bar)
Maximum Viscosity: 100 mPa·s
Liquid Temperature Range: 4–60 °C (standard); up to 120 °C with high-temperature pump head
Pump Head Materials: Stainless steel; ceramic options available for biocompatibility
Wetted Materials: Graphite fiber reinforced PTFE (GFP), sapphire, ruby
Gradient Capability: Isocratic
Piston Seal Wash: Active
Purge Valve: Manual
Integrated Pressure Sensor: Yes
Smart Drive Control: Enhanced technology to actively prevent pressure ripple
Low Dead Volume: Yes
Inline Filter: Built-in

£ 3,500.00 (ex. VAT) 1 in stock

Thermo Scientific S52-ST Swinging Bucket Rotor 52000rpm 4 x 5ml Lab

ITEM-40022

Thermo Scientific S52-ST Swinging Bucket Rotor 52000rpm 4 x 5ml Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

Rotor: S52-ST (52K RPM)
Buckets: 4 x 5ml (0134)

£ 3,500.00 (ex. VAT) 1 in stock

Priorclave PS/QCS/SV100 Top Loading Autoclave Lab

ITEM-35118

Priorclave PS/QCS/SV100 Top Loading Autoclave

This was removed from a university lab where it was surpus to requirements.

The unit powers up but has only been partially tested as it requires a steam generator, which we do not have.

It is in good cosmetic condition with minor marks.

£ 3,500.00 (ex. VAT) 1 in stock

Beckman Biomek FXP System with Accessories, Newport Isolation Table Lab

ITEM-49525

Beckman Biomek FXP System with Accessories, Newport Isolation Tables, and Consumables

This item is sold on behalf of a client where it is surplus to requirements.

This system is in complete working order, and in good cosmetic condition.

The system comprises the following:

Beckman Coulter Biomek FXP liquid handling system (model FXP-578831) – unassembled
Two anti-vibration tables
Thermo Scientific Cytomat Microplate Hotel (model 622855)
FluidX XSD-96 Pro
Various tip consumables (20–30)
Some components already packaged in bubble wrap from previous relocation

The system was last in known working condition approximately two years ago at the previous institution before being packed for transport. It has not been assembled or tested since relocation and is currently stored in a disassembled state.

Includes:

Beckman Coulter Biomek FXP (FXP-578831)
Two anti-vibration tables
Thermo Scientific Cytomat Microplate Hotel (622855)
FluidX XSD-96 Pro
Tip consumables (20–30)

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 3,500.00 (ex. VAT) 1 in stock

Beckman Coulter Cytomics FC 500 System w/ PC & Software Lab

ITEM-49238

Beckman Coulter Cytomics FC 500 System w/ PC & Software – Lab Equipment

This system was removed from a university laboratory where it was surplus to requirements.

The Cytomics FC 500 is in good cosmetic condition, though we were unable to power it on due to facility limitations in testing Class 3+ laser systems. The previous owner indicated that it was in good working order when last used, but it has not been operated in several years.

No further testing has been carried out, and the system is therefore sold as seen.

Included Components

PC and monitor
Cytomics USB Box
Various cables
Used sheath filter
Laser power supply unit (PSU)
Some tubing
Some spare parts
Waste bottle
Cytometry UPS (Serial No. AL07035)

Installed Software

CXP Analysis
CXP Cytometer
FC Off
FC On (Warm Up)
FlowCytomix Pro

£ 3,500.00 (ex. VAT) 1 in stock

Priorclave Model PS/QCS/SV100 Top Loading Autoclave Lab

ITEM-35119

Priorclave PS/QCS/SV100 Top Loading Autoclave

This was removed from a university lab where it was surpus to requirements.

The unit powers up but has only been partially tested as it requires a steam generator, which we do not have.

It is in good cosmetic condition with minor marks.

£ 3,500.00 (ex. VAT) 1 in stock

Rodwell Ensign 125 Autoclave Lab

ITEM-45129

Rodwell Ensign 125 Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.

The item is due for a service, and no further testing was conducted.

The previous client has stated it was in working order prior to removal.

Specifications:

Model: Ensign 125
Serial No.: 2295
M24 Controller

All Products

Filters