LTE Touchclave - R Benchtop Autoclave 40 L

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

This Illumina HiSeq 1000 Genome Sequencing System was removed from a university lab where it was surplus to requirements.

This system powers on and is in good cosmetic condition, unable to be tested further at our facility.

The lab confirmed it was working prior to collection.

The system comes complete with all necessary cables integrated.

Beckman CyAn ADP Flow Cytometer with DAKO Sheath Management System Lab

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.

The SMS has been powered on and PAT tested, we are unable to test it further at our facility.

Includes;

CyAn ADP

• Manufactured: 2011
• Serial Number: 701

SMS Unit

• Manufactured: January 2008
• Serial Number: 600

PerkinElmer Flexar LC Autosampler

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on. No further testing has been conducted.

Includes:

• PerkinElmer Flexar LC Autosampler main unit
• CD containing software and documentation for a PerkinElmer Flexar and Series 225/275 Autosampler.

Illumina MiSeq Benchtop Gene Sequencer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in working order.

The previous owner has stated it was in working order prior to removal.

Software installed: MiSeq Control Software 4.1.0.656

Fluidigm BioMark System with MX & HX Modules w/ PC & Software Lab

This system was removed from a university laboratory where it was surplus to requirements.

The system powers on and is in good used cosmetic condition. All included software boots up correctly.

The BioMark tray opens and closes via the Data Collection software, and the lamp switches on and off as expected. The lamp currently installed shows 0 hours used out of 1000 and may have been replaced during a reported service in 2024.

Both the HX and MX controllers power up and appear to connect to the BioMark via Ethernet.

Power on sequence: Switch on PC before main unit; use front switch before back

Log-in information available on request.

Includes:

• Fluidigm BioMark System
• Fluidigm BioMark IFC Controller HX
• Fluidigm BioMark IFC Controller MX
• Monitor, keyboard, and mouse
• 2 x used lamps (one marked 3700 hours; one unmarked)

Installed Software:

• BioMark Data Collection 4.7.1
• Fluidigm Digital PCR Analysis 4.1.2
• Fluidigm Melting Curve Analysis 4.1.3
• Fluidigm Real-Time PCR Analysis 4.7.1
• Fluidigm SNP Genotyping Analysis 4.5.1

Perkin Elmer Clarus 500 Gas Chromatograph Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Synentec NyOne Cell Imager Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, unable to test further as it requires connection directly to a PC to operate.

The lab confirmed it was in good working order prior to removal.

SPEX SamplePrep 1600 MiniG Homogeniser Lab

This item is sold on behalf of a client. It is surplus to requirement.

It is in very good cosmetic condition and in complete working order, with minimal prior use.

Accessories included;

• 2 ml Small Tubes (with steel balls)
• 8 unopened boxes × 24 tubes each
• 1 opened box of 24 tubes
• 1 opened box with 13 tubes
• 234 spare lids
• Cryoblocks for the small 2 ml tubes
• 15 ml Short Vials (with lids and steel balls)
• 92 vials with lids
• 5 spare lids
• 94 larger steel balls
• Cryoblocks for the short 15 ml tubes

It is available for collection from Bristol UK.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Faster SafeFAST Elite Class 2 Biosafety Cabinet Lab

This item is sold on behalf of a client where it is surplus to requirements.

This item is in complete working order, and in good cosmetic condition.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Waters Alliance HPLC System 2695 Separations Module, 1515 IP, 2487 Dual

This system was removed from a facility where it was surplus to requirements.

All components are in good cosmetic condition with typical signs of previous laboratory use. The system powers on, however we are unable to test it further at our facility.

System Components

• Waters 2695 Separations Module
• Model: WAT270886
• Serial Number: H07SM7214A

• Waters 1515 Isocratic HPLC Pump
• Model: 186001515
• Serial Number: J0515P 230M

• Waters 2487 Dual λ Absorbance Detector
• Model: WAT081110
• Serial Number: L05487 056M

• Waters TC2 Temperature Control Module II
• Serial Number: H05TC2 656E

Thermo Scientific Easy-Nano LC 1000 UHPLC Chromatography

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note; It is missing the side access panel.

Includes;

• Thermo Scientific Easy Spray - Mfc.date: 2012
• P/N: ES081

• 8 x Nano vip-er boxes with varying cables/wires/adapters.
• 1 x Viper cap
• 1 x Acclaim PepMap RSLC
• 1 x 350 microLitre mixer kit
• 1 x large box containing various accesseries.

Tuttnauer 5050ELV-D Floor-Standing Autoclave

This item was removed from a facility where it was surplus to requirements.

The unit is in good cosmetic condition with typical signs of previous laboratory use. It powers on, however we are unable to test the system further at our facility.

An engineer tested the unit before it was removed and believes it is in good working order.

To service and operate the system, the following utilities are required:

• Compressed air supply
• Mains water supply
• Softened water supply

Waters nanoACQUITY UPLC Sample Manager & Binary Solvent Manager Lab

This system was removed from a facility where it was surplus to requirement.

Both included units are in good cosmetic condition and in good working order.

Includes;

Waters nanoACQUITY UPLC Sample Manager - PM Kit: 201000182 / Serial No.: C11NPS932M

Waters nanoACQUITY UPLC Binary Solvent Manager - PM Kit: 201000181 / Serial No.: M10NPB048N

Metrohm 916 Ti-Touch Magnetic Stirrer Titration System with Dosing Unit Lab

This system is sold on behalf of a client where it is no longer required.

The equipment consists of a Metrohm 916 Ti-Touch control unit with associated dosing unit and accessories. Internal self-diagnostics and pixel testing were completed with no faults reported.

The last known service was carried out in November 2021.

Please note: The unit powers on and is responsive, with the touchscreen functioning correctly, however, a display issue is present: The display now shows predominantly blue/black tones.

The system comprises the following major components:

• Main Unit & Control Interface
• Metrohm 916 Ti-Touch control unit
• Dosing & Process Components
• Metrohm dosing unit

Accessories & Included Items

• Dosing unit
• Power supply / charger
• Accessories as shown in photos

The seller can package the system securely for transport or arrange delivery by agreement, including potential drop-off. Customer courier collection is also acceptable.

The system is available for collection from Newport, South Wales, United Kingdom.

Bio-Rad S3e Cell Sorter 488/561 nm w/ Accessories & Manual Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition. It has not been powered on due to testing limitations with Class 3 and above lasers at our facility.

Last Service: 25.08.2021

It contains the following lasers;

• 488 nm
• 561 nm
• 640 nm

Also includes;

• S3 Cell Sorter Accessory Kit
• User Manual

Qiagen BioRobot 8000 Molecular Biology Workstation System w/ Software Lab

This system was removed from a facility where it was surplus to requirement.

It powers on and communicates with the software, we are unable to test it further at our facility.

Please note: The monitor is not included.

Includes various accessories as shown.

Sigma 4-16KS Benchtop Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

Includes;

• Sigma 09100 Rotor

Supertech Instruments STable Active Pneumatic Vibration Isolation Table

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes;

• SUPETECH Quiet Air Compressor

Gilson GX-271 Liquid Handler and PC w/ Biotage Controller and Editor Software

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

The laptop is installed with Biotage Controller and Editor software, which allows control of the GX-271 needle. Please note, the software may display a COM1 connection error due to missing external components (not included).

For standalone use, the GX-271 is better suited to Gilson TRILUTION® LC or TRILUTION® LH software.

10x Genomics Chromium Controller for Single Cell Assays

This is being sold on behalf of a university client.

It is in good working order and is in good cosmetic condition with minor marks. The client simply upgraded to a newer unit.

The unit is available for collection from Cambridge.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Shimadzu GC-2014 Gas Chromatograph

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on, but there is no software included.

Therefore, we are unable to conduct further testing.

The lab confirmed it was in working order prior to removal, but were unable to provide the PCs and Software.

Includes:

• Manual
• Users manual on disc
• LabSolutions GC Solution release 2.30

Specifications:

• Model: GC-2014
• Serial No.: C11484301470

Shimadzu GC-2014 Gas Chromatograph

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on, but there is no software included.

Therefore, we are unable to conduct further testing.

The lab confirmed it was in working order prior to removal, but were unable to provide the PCs and Software.

Includes:

• GC-2014 Gas Chromatograph User’s Manual
• Needles
• Operation Manual
• SGE Inlet Liners
• Restek Septa
• Hamilton Syringe

Specifications:

• Model: GC-2014
• Serial No.: C11484301470

Shimadzu GC-2014 Gas Chromatograph with LabSolutions GCsolution Software

This system was removed from a facility where it was surplus to requirements.

The unit is in good cosmetic condition and powers on. The previous owner advised that it was in working order prior to removal.

It is fitted with 2 × FID detectors, gas sampling valves, and a packed column adapter.

Software Included:

LabSolutions GCsolution

Release: 2.31

Model: GCsolution

Cat No: 223-07370

S/N: C51744600344

• Model: GC-2014

Redd & Whyte Preddator Liquid Robotic Handler

This system was removed from a facility where it was surplus to requirements.

It is in excellent cosmetic condition. No further testing has been carried out, however, the previous owner confirmed it was working when last used.

Please note; Laptop and software are not included.

Includes:

• Redd & Whyte Preddator Liquid Robotic Handler
• 1 x Data cable
• 1 x 1.5 metre plastic tubing

Serial No.: 1040

Model No.: [Not specified]

Waters Acquity UPLC H07UPT, H07UPA, H07UPB & F07UPH System

This item was removed from a university where it was surplus to requirement.

All included units are in good cosmetic condition and power on independently, we are unable to test them further as a system at our facility.

This system comprises the following:

1 x Waters Acquity TUV Detector- H07UPT

1 x Waters Acquity Sample Manager- H07UPA

1 x Waters Acquity Binary Solvent Manager-H07UPB

1 x Waters Acquity Ethernet Box -F07UPH

Mackey Bowley Diffusion Bonder, Cheltenham Induction Heating & Edwards E2M80.

The system was removed from a University Lab as surplus to requirements.

This system powers up and is in good cosmetic condition, we are unable to test it further at our facility.

Mackey Bowley Diffusion Bonder.

Serial No. S9638/91

Chamber Dimensions: L 58cm x W 38cm x H 38cm.

Bed Dimensions: L 80cm x W50cm.

Fitted with: Oerlikon Leybold Vacuum Thermvac. Type: TTR91. Serial No. 230035.

Edwards Speedivalve.

Edwards Speedivac Oil Defussion Pump. Model: 403A. Serial No. 1981.

Eurotherm Controller Type 815 & 818 Installation Manual.

Stenhoj Hydraulik 60 Ton.

Type: 500414.

Serial No. 63153.

Model Year: 1991.

Cheltenham Induction Heating Ltd.

Type: TRI 12.

Serial No. TRI2017.

Instron Control Panel.

Model: 1342.

Serial No. H2003.

Fitted with: Edwards Pirani 11 & Display One Single Channel Vacuum Display.

Display One Single Channel Vacuum Display Manual.

Edwards High Vacuum Pump.

Model: E2M 80.

Serial No. 995.

Comes with: Edwards Backing Roughing Valve. Model: BRV25PK. Serial No. 02011 & Instruction Manual.

Lancer 810 LX  Undercounter Glassware Washer Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

Brabender MT-S HYD Side Feeder – 629375.016

This item was removed from a facility where it was surplus to requirements.

The unit appears to be a Brabender side feeder system, supplied with associated mounting rails, hopper/feed components and accessories as shown in the photos.

The item is in used cosmetic condition with signs of previous use. No testing has been carried out by us.

Included:

Brabender MT-S HYD Side Feeder

Mounting rails/frame components

Hopper/feed components

Side feeder accessories/spares as shown

Thermo Scientific Easy-nLC II Nano-flow Liquid Chromatography System

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Log-in information is available on request.

Rigaku X-ray Diffractometer (XRD) Ultima III

This system was removed from a university lab where it was surplus to requirements.

The system is in reasonable used cosmetic condition. It has not been powered on at our site due to our on-site risk assessments surrounded X-Rays.

The unit was working when put into storage in 2018.

Various components and parts are included as listed below, along with a PC setup, although no Rigaku software programs appear to be installed on the PC.

However, there are the following software disks included:

• Rigaku Basic Software (Cat No.: 9240J101)
• Rigaku TTRAX3 and Ultima3 Software (Cat No.: 9240J101)
• Rigaku Special Order Software (U30megaP) (Cat No.: 9999)

System Specifications:

• Model: Ultima III
• Cat No.: 2035M410
• Serial No.: DD3654N

• 6 Station Holder
• Model: SA-HEM3
• Cat No.: 4057J101
• Serial No.: 00563702

• Patlite Beacon
• Model: LMS-L (SN-06X03M)

• Rigaku DC Motor Controller
• SN: DD12866

• Rigaku Long Fine Focus
• Type: R01-29-0202
• NC: 9430 022 73201
• No. DK 402688

• Rigaku CBO Cross Beam Optics
• Cat No.: 2220B101
• SN: DD12793

• Additional Rigaku parts:

• Cat No.: 5738E402 (SN-DD061813)
• Cat No.: 2155G101 (SN-DD12804)
• Cat No.: 4601K831 (SN-DD12154)
• Cat No.: 4253A101 (SN-DD11586

• Vexta Stopping Motor
• Model: PK543-A
• SN: UR70J32307

PC Setup:

• Dell Optiplex 9020 with monitor, keyboard, and mouse
• The PC is in working order with all passwords cleared. It contains a few Rigaku files, but no software programs appear to be installed.

Included Manuals/Software:

• 2 x Rigaku D/MAX 2000/PC Series Instruction Manual
• X-Ray Diffractometer Instruction Manual
• Rigaku Basic Software (Cat No.: 9240J101)
• Rigaku TTRAX3 and Ultima3 Software (Cat No.: 9240J101)
• Rigaku Special Order Software (U30megaP) (Cat No.: 9999)

Loose spare parts included:

• Rigaku Cat No.: 2701E201 (SN-AD08851)
• Container of round parts: Rigaku 900003 SH, w/Groove
• 2 x Small containers with unknown parts
• Scintag Generator Key
• Key labeled: "Microscope"
• Container of small metals, including:
• 1 x Bag labeled "Silicon"
• 1 x 640d Silicon Powder
• 2 x Tubs UCAR Spectroscopic Powder
• 1 x Tub labeled "Tung Flake"
• Approximately 20 x small containers of Silicon metal

Thermo Scientific Sorvall Legend XFR Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition both internally and externally.

The item powers on and works as intended, it has been temperature-tested. (Thermometer not included)

Also includes the following:

Thermo Scientific 75003607 TX-750 Rotor & 75003608 750mL Round Buckets (set of 4)

Max Speed: 4700 rpm

Max RCF:4816 x g

This was removed from a university lab where it was surplus to requirements.

The room is currently disassembled and for collection only in Bedwas, Caerphilly UK

Everything is in good cosmetic condition with minor marks. It was in good working order prior to disassembly.

Double doorway entry:

2x Sliding Doors:

5x doorway wall panels:

Perspex panels:

•14x 105 x 98cm white panels

•1x 105 x 98cm clear panel

•2x 118cm x 104 cm white panels

• 4x 115 x 96cm thicker white panels

• 7x 96 x 96cm thicker white panels

Rubber Seals:

The seals go around the perspex panelling. -as seen in photos.

22x large rubber seals

4x smaller rubber seals

1x Monmouth Circulaire air vent:

Model WCAM 2250

Air Vent Dims:

D47cm x W102cm x H96cm

2x Air Vent Legs:

The units are in good cosmetic condition and are adjustable.

1x Monmouth Scientific ON/OFF Switch:

Aluminium Frame:

6mm Hex Key to be used to attach and tighten sections together

•2x lengths of 317cm x5cm

•4x lengths of 196cm x 5cm

1x length of 217cm x 5cm

5x lengths of 230cm x 3cm

Tenco Semi-Automatic Filling & Capping Machine for Spouted Pouches – 250cc

This system is being sold on behalf of a client following closure and consolidation of a specialist food production facility.

The machine has been used for small batch food manufacturing applications and offers a compact semi-automatic solution for pilot scale and low-volume production environments.

Purchased in 2020, the machine reportedly saw only light operational use from March 2021 onwards.

The system operates pneumatically via compressed air supply at approximately 4 bar and features stainless steel product-contact components designed for hygienic operation and simplified cleaning procedures.

The machine remains in good overall condition with some cosmetic wear noted to the main bearing assembly and scratches present to the hopper from normal use.

Key Features

• Tenco Semi-Automatic Filling & Capping Machine
• Designed for spouted pouch filling applications
• Suitable for liquids and paste-viscosity products
• Pneumatic operation
• Stainless steel product-contact components
• Semi-automatic operation
• Easily dismantled for cleaning and maintenance
• 30 litre hopper capacity

Included in Sale

• Tenco Filling & Capping Machine
• Spare fitting for liquid applications
• Operations manual
• Additional technical documentation
• Removed seals, clamps, nozzle assemblies and associated components shown in photographs

Service / Maintenance History

• Purchased in 2020
• Light use from March 2021 onwards
• Cleaned after every use
• Main bearing replaced December 2023
• All removable seals reported to remain in good condition

Utilities / Site Requirements

• Compressed air supply required
• Approximate operating pressure: 4 bar

Please note; this item is being sold on behalf of a client and is therefore non-returnable and non-refundable.

New Brunswick Scientific Ultra Low Temperature Freezer -80C Model C760-86 Lab

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and in good working order.

Biotage TurboVap II Sample Evaporator & 10x 200ml Biotage Tubes Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

Pair of Sport System Hydroplay Official S04106 Competition Basketball Goals

These Competition Basketball Goals are sold on behalf of a University in Scotland.

The previous client has notified us that these items are in very good condition with little use.

This mobile basketball system features two mobile and two stationary wheels that retract or extend when the unit is lifted or lowered. It includes a 15 cm thick shield covered with synthetic, washable material and tempered safety glass boards with protected lower edges.

The complete system weighs approximately 1050 kg and includes:

• Two tempered safety glass boards (180x105 cm, 12 mm thick) with edge covers
• Two basketball rings with nets
• Rear plates for anchoring to the floor

Specifications:

• Projection: 325 cm
• Required setting length: 425 cm
• Dimensions when folded: 410x185x170 cm

The system complies with FIBA standards (Level 1).

This item will require collection from: UHI Perth, located in Perth, Scotland.

These can either be sold as a pair or individually.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

HPC Laser Model: RC2412 Laserscript Table Router Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order.

This item also includes:

1 x Control Panel.

1 x MPC6620 controller.

1 x MPC6620 User Manual. (V1.0) July 2013.

Item Dimensions:

L 300 cm x W 170 cm x H 137 cm.

Weight: 356 kg

Cytiva Biacore X100 Surface Plasmon Resonance (SPR) System Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it requires a service and a needle replacement.

Thermo Scientific Savant SPD1010 SpeedVac Concentrator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: During testing, it was noted that the unit takes longer than expected to pull vacuum.

Riello UPS Multi Sentry MST 100

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: This unit was originally hardwired and will therefore require recommissioning.

BioNex Nanodrop W/ NS-2 Stage & UVR-M Chamber System Lab

This system was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition, we are unable to test it further at our facility.

Includes:

• UVR-M Chamber
• Nanodrop
• NS-2 Stage
• 2 x Honeywell Burdick and Jackson bottles
• Gilson 11727IN Nanobuilder Software disk
• Various cables
• Various Nanodrop parts and accessories

Gilson Pipettes – 42 Units (6 Stands of 7) Adjustable Volume P2–P5000

This equipment is being offered for sale on behalf of a client due to being surplus to requirements.

This lot consists of 42 Gilson adjustable-volume, single-channel pipettes supplied across 6 complete stands (7 pipettes per stand). The set covers a full range of commonly used volumes including P2, P10, P20, P100, P200, P1000, and P5000, making it suitable for a wide range of laboratory applications including molecular biology, chemistry, and general lab workflows.

Gilson pipettes are widely regarded for their precision, durability, and reproducibility, making them a standard choice in research, clinical, and industrial laboratory environments.

According to the client, all pipettes are in good used condition and have been well maintained. Please note that the pipettes are not currently calibrated, and buyers should factor calibration into commissioning prior to use where required.

Included in sale:

• 42 × Gilson single-channel pipettes
• Volume ranges included: P2, P10, P20, P100, P200, P1000, P5000

• 6 × pipette stands (each holding 7 pipettes)

Please note, any additional accessories, services or documentation not specifically listed above are not included.

The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

Leybold Trivac D40B & RUvac WAU251 Vacuum System

This item was removed from a university laboratory where it was surplus to requirements.

This item is a combination of Leybold Trivac D40B and RUVAC WAU251 3-phase vacuum pumps. According to the previous owner, both units are in working condition; however, no further testing has been conducted on-site.

Specifications:

Leybold RUVAC:

• Type: WAU251
• Catalog No.: 11721
• Serial No.: B891200093

Leybold TRIVAC:

• Type: D40B
• Catalog No.: 112 86
• Serial No.: A881100069

Waters HPLC System 717plus, 486 TAD, 2487 Detector, 1525 Binary Pump Lab

This system was removed from a facility where it was surplus to requirement.

All modules are in good cosmetic condition and power on, we are unable to test it further at our facility.

The previous owner stated it was in working order when it was last in operation.

System comprises of the following:

• 1525 Binary HPLC Pump 25P S/N C0225P004F
• 2487 Dual λ Absorbance Detector WAT081110 S/N D02487 461M
• 717+ Autosampler 71P WAT078900 S/N C0271P 886M
• 486 Tunable Absorbance Detector S/N MX3MM7502M
• Column Heater 186001500 S/N L015CH 358M

Also comes with:

• Breeze Software Tutorial Disk
• Windows NT Easy Restore V3.2 Disk
• Maintenance and Troubleshooting Disk
• Breeze Software Disk
• Various comms cables

Esco Labor Model EL3 Dual Agitated Vacuum Laboratory One-Pot Homogeniser

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition. The unit cannot be powered on as the control panel is not included, and it has not been PAT tested for this reason. The previous owner stated that it was in working order prior to removal.

Model: EL3

This Dionex HPLC System was removed from a university lab where it was surplus to requirements.

The system is in reasonable cosmetic condition, but some parts are heavily stained and have sustained minor surface damage.

All included units power up and have passed self-tests, we are unable to test them as a system at our facility.

Included with this system are the following:

1x Dionex Photodiode Array Detector

Model: PDA-100

P/N: 057060

1x Dionex RF 2000 Fluorescence Detector

S/N: C2095377023OUS

P/N: 5057.0020

1x Dionex Thermostatted Column Compartment TCC-100

S/N: 2850410

P/N: 5710.0000

1x Dionex UCI-100 Universal Chromatography Interface

S/N: 2620102

P/N: 5911.0010

1x P680A LPG-4 HPLC Pump

S/N: 2780421

P/N: 5030.0015

1x Solvent Rack SOR-100

S/N: 3060402

P/N: 5030.9200

This Agilent 1100 Series HPLC System was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition with minor marks from use. We were unable to test it further at our facility.

Please note: Cables other than kettle leads are not included.

Included are;

Agilent 1100 Series

Model - G1314A VWD

SN - JP20217921

Agilent 1100 Series

G1311A QuatPump

SN - DE14919047

Agilent 1100 Series

G1322A Degasser

SN - JP05033959

Agilent 1100

G1364A AFC Automatic Analytic Fraction Collector