All Products

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Carl Zeiss LSM 510 META Confocal Microscope/Laser Module Parts & Accessories

ITEM-50098

Carl Zeiss LSM 510 META Confocal Microscope/Laser Module Parts & Accessories

This was removed from. a university lab where it was surplus to requirements.

It seems there are some parts missing. What is included is listed below;

Table/Rack on wheels

Dimensions - L111 W70 H62cm

Fitted inside:-

Carl Zeiss ECU-LSM 5 Live

PC - Powers on but the Hard drive has been removed.

Carl Zeiss LSM 510 META Laser Head Casing - The casing is in bits and it looks like there are parts missing

Carl Zeiss Remote for LSM 510 R3.5/LSM 5 Live

Box full of all the connection cables

Keyboard & Mouse

Box of small parts/accessories including:-

Several USB Cables

Lots of small parts/accessories

£ 2,000.00 (ex. VAT) 1 in stock

Coherent Laserbrand LT300 CO2 Laser System Class 4 Lab

ITEM-52693

Coherent Laserbrand LT300 CO₂ Laser System – Class 4 Laboratory Laser

This system was removed from a facility where it was surplus to requirement.

It has not been powered on at our facility. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.

According to the previous site, the system was operational prior to decommissioning, though we have not independently verified this.

Please note; No key is supplied with this system.

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Zeiss Axiovert M 100 Microscope System with LSM510 META & Lasos Laser Setup Lab

ITEM-46953

Zeiss Axiovert M 100 Microscope System with LSM510 META & Lasos Laser Setup

This system was removed from a university laboratory where it was surplus to requirements.

The microscope was plugged in but did not power up, potentially indicating a fault within the unit or a blown bulb. The Class 3B laser unit was only visually inspected and was not powered on or tested due to safety precautions. The LSM 510 META unit also remained untested, as the necessary power supply is not supplied. Access to the PC was restricted due to password protection, preventing verification of software functionality, and during internal review, the connection layout between the laser and microscope could not be confirmed.

Due to the issues stated above, it is listed as Spares/Repair.

The system comprises the following:

Zeiss Axiovert M 100 Inverted Microscope, fitted with:

SNT 12V 100W Power Supply
Standard mounting and optical ports (not fully verified due to power issue)

Laser Scanning & Illumination Components:

Zeiss LSM510 META Confocal Module
Carl Zeiss LSM 5 Laser Module
Lasos LGN 7812 Laser
Zeiss ECU
Zeiss MCU 28
Zeiss Joystick Controller

Computing & Software:

PC (password protected – software not accessed)
Monitor (powers on)

Additional:

Various interconnect cables (supplied as seen)

£ 2,000.00 (ex. VAT) 1 in stock

PTI Photon Technology International High Resolution Dye Laser and Nitrogen Laser

ITEM-53786

PTI Photon Technology International High Resolution Dye Laser & Nitrogen Laser System

This system was removed from a facility where it was surplus to requirements.

The equipment is in good cosmetic condition with typical signs of previous laboratory use. Due to safety restrictions on testing Class 3+ laser systems at our facility, the system has not been powered on.

The High Resolution Dye Laser and Nitrogen Laser units were manufactured in 2012, while the GL-303 Frequency Doubler is an older unit manufactured in 2002.

The previous owner stated the system was in working order prior to removal.

System Components

Nitrogen Laser – Model GL-3300

Manufactured: September 2012
Serial Number: 1506

High Resolution Dye Laser – Model GL-302

Manufactured: September 2012
Serial Number: 1506

Frequency Doubler – Model GL-303

Manufactured: April 2002
Serial Number: 1290

BryteBox – Version 2.2

Serial Number: 2277

Photon Lamp Power Supply

Serial Number: 2071-LPS220B

Photon Control Module

Serial Number: 1073-TCM1000

Photomultiplier Detection System

Serial Numbers: 5643-MONO / 5335-ELTRO

Fluorimeter System

Serial Numbers: 2883 / 2397-MP1

£ 2,000.00 (ex. VAT) 1 in stock

Zeiss Control Rack & Power Supply for LSM AIM-System Laser Scanning Microscope

ITEM-51817

Zeiss Control Rack & Power Supply for LSM AIM-System Laser Scanning Microscope Lab

This sytem was removed from a facility where it was surplus to requirement.

It has not been powered on due to testing limitations with Class 3 and above lasers at our facility.

Includes;

Carl Zeiss power supply (SN: 2562000616) which passed a Class 1 PAT test.

£ 2,000.00 (ex. VAT) 1 in stock

Hettich Universal 32 R Centrifuge with 4000rpm Rotor Lab

ITEM-45197

Hettich Universal 32 R Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge powers on and is in fair cosmetic condition. It has been tested for Temperature and RPM functionality and is in good working order.

Testing Summary:

RPM: Successfully reached 2000 RPM and 4000 RPM.

Specifications:

Model: Universal 32 R
Serial No.: 0003465-01-10

£ 2,000.00 (ex. VAT) 1 in stock

Infors HT Bioreactor Labfors System Lab

ITEM-54837

Infors HT Bioreactor Labfors System

This system was removed from a facility where it was surplus to requirement.

It powers on and passed all initialisation checks, we are unable to test it further at our facility.

Hours: 796,068

£ 2,000.00 (ex. VAT) 1 in stock

Nikon Optiphot-2 Compound Microscope w/ 4 x Objectives Plan, Planapo, DIC

ITEM-54720

Nikon Optiphot-2 Compound Microscope w/ 4 x Objectives Plan, Planapo, DIC

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes;

Objectives

Nikon Plan 10 / 0.30 DIC 160/0.17
Nikon Plan 20 / 0.50 DIC 160/0.17
Nikon Plan 40 / 0.70 DIC 160/0.17
Carl Zeiss Planapo 40 / 1.0 Oel m.l 160/-

Eye pieces

2 x Nikon CFWN 10x/20

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Job Lot of 50 x Jenway 3310 pH Meters W/ Power Supplies

ITEM-55158

Job Lot of 50 x Jenway 3310 pH Meters W/ Power Supplies

These items were removed from a facility where they were surplus to requirement.

This job lot of items comes from a facility where they were surplus to requirement. They were collected from various store rooms and facilities.

These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

£ 2,000.00 (ex. VAT) 1 in stock

Eschmann Little Sister SES 3000B Vacuum Autoclave Lab

ITEM-55610

Eschmann Little Sister SES 3000B Vacuum Autoclave Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

It includes the original box and USB.

Last Service: 12/07/2025

£ 2,000.00 (ex. VAT) 1 in stock

Thermo Shandon Finesse 325 Microtome Lab

ITEM-55591

Thermo Shandon Finesse 325 Microtome Lab

This item was removed from a facility where it was surplus to requirement.

It is in good mechanical order.

£ 2,000.00 (ex. VAT) 1 in stock

Millipore Elix Milli-Q Integral 10 Water Purification System Lab

ITEM-55559

Elix Milli-Q Integral 10 Water Purification System Lab

This item was removed from a facility where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.

£ 2,000.00 (ex. VAT) 1 in stock

ALS Automatic Label Applier Multi-Roller Unit Model ALS4310MRU

ITEM-55417

ALS Advanced Labelling Systems Automatic Label Applier Multi-Roller Unit Model ALS4310MRU

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note:

The belt has started to fray and may require replacement soon.

£ 2,000.00 (ex. VAT) 1 in stock

Illumina Genome Analyser IIx System w/ PEM IIx & Dell PC System NGS Lab

ITEM-54845

Illumina Genome Analyser IIx System w/ PEM IIx & Dell PC System NGS Lab

This system was removed from a facility where it was surplus to requirement.

Due to safety restrictions on testing Class 3 and above lasers at our facility, the Genome Analyser IIx has not been powered on.

The PEM IIx powers on, we are unable to test it further.

The included PC system contains the folllowing;

Sequencing Analysis Viewer
Genome Data Collection Software
Camera Software for the Onboard Camera in the Illumina GAIIx

£ 2,000.00 (ex. VAT) 1 in stock

Pacific Biosciences PacBio Sequel DNA Sequencing System

ITEM-51596

Pacific Biosciences PacBio Sequel DNA Sequencing System

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility due to restrictions regarding class 3+ lasers.

External length (cm) 93
External width (cm) 85
External height (cm) 168

The previous owner stated it was in working order prior to removal

£ 2,000.00 (ex. VAT) 1 in stock

Coherent Sapphire Laser Controller with Sapphire 488-200 Laser Head Lab

ITEM-41214

Coherent Sapphire Laser Controller with Sapphire 488-200 Laser Head

These items were removed from a university where they were surplus to requirement.

Both the laser head and controller are in good cosmetic condition. The controller powers on, but we cannot test the laser as the connecting cable from the controller is not supplied.

Coherent Sapphire Laser Controller

Model: Sapphire CDRH Controller HP

Sapphire 488-200 laser head.

Model: Sapphire 488-200 CDRH

Data cable not included.

£ 2,000.00 (ex. VAT) 1 in stock

Binder C150 CO2 Laboratory Incubator Double Stack Lab

ITEM-50995

Binder C150 C02 Laboratory Incubator Double Stack Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 2,000.00 (ex. VAT) 1 in stock

Binder C150 CO2 Laboratory Incubator Double Stack Lab

ITEM-50994

Binder C150 C02 Laboratory Incubator Double Stack Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: when set to 37°C, the unit runs between approximately 36–37°C, so calibration is recommended before use.

£ 2,000.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model MCO-170AIC-PE With Shelving And Tray Lab

ITEM-37999

PHCBI CO2 Incubator Model MCO-170AICD-PE With Shelving And Tray Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order. it has been fully temperature and CO2 tested.

It is in very good cosmetic condition internally and externally.

This item includes the following:

2 x Shelves: 47 x 45 cm

£ 2,000.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model Type MCO-170AIC-PE With Shelving And Tray Lab

ITEM-38000

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order. It has been fully temperature and CO2 tested.

It is in very good cosmetic condition internally and externally.

This item includes the following:

3 x Shelves: 47 x 45 cm

1 x Humidity Water Tray: 44 x 25 x 7 cm

£ 2,000.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model - MCO-170AIC-PE Lab

ITEM-37998

PHCBI CO2 Incubator Model - MCO-170AICD-PE Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

Also includes the following:

1 x Shelf: 47 x 45 cm

£ 2,000.00 (ex. VAT) 1 in stock

Nikon Eclipse TE300 Inverted Fluorescence Microscope System w/ 20x/0.50 Ph1 Lab

ITEM-36255

Nikon Eclipse TE300 Inverted Fluorescence Microscope System Lab

This was removed from a university lab where it was surplus to requirements.

This system is in good cosmetic condition with all included units in working order.

1 x Nikon Eclipse TE300 body fitted with:

1 x Nikon 065851 multi position binocular neck.

1 x Nikon manual stage.

1 x Nikon filter holder, no filters fitted.

1 x Nikon Condenser Turret fitted with 1 x LWD ∞ Ph3 & 1 x Blanking plate.

The other 3 blanking plates are missing.

1 x Nikon LWD 0.52

2 x Nikon CFI 10x/22 eyepieces.

1 x Nikon Plan Flour

20x/0.50

Ph1 DLL

Objective.

1 x Nikon LHS-H100P-1 Halogen 12v 100w Lamp.

1 x Nikon TE-PSE100 Power supply with control cable.

1 x Nikon LH-M100C-1 Mercury 100w Lamp. (Run hours not known, bulb will require replacement).

1 x Nikon C-SHG1 Power Supply. (Run time counter reset).

£ 2,000.00 (ex. VAT) 1 in stock

Binder BD 720 E2 Lab Incubator

ITEM-43003

Binder BD 720 E2 Lab Incubator

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition, however the dial is cracked.

£ 2,000.00 (ex. VAT) 1 in stock

Zeiss Axio Vert.A1 FL Inverted Transmitted Light Microscope Lab

ITEM-31570

Zeiss Axio Vert.A1 FL Inverted Microscope

This system was removed from a university lab where it was surplus to requirements.

The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted.

The instrument is configured as follows:

1 x Microscope stand Axio Vert.A1 FL (431030-9010-000)
Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination
Reflector modules: DAPI, FITC, TRITC, empty

1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000)
Position 1: empty
Position 2: 424228-9060 0.05T Neutral density filter 0.05
Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55
Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55
Position 5: empty

1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000)

1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000)

1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23

1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000)

1 x Camera adapter 60N-C 2/3" 0.5x (426112)

1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00)

1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000)

Object guide M, 130x85mm, for Axio Vert (432333-9040-000)

1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation

£ 2,000.00 (ex. VAT) 1 in stock

Thermo Elemental X Series ICP-MS Mass Spectrometer w/ Software & Accessories

ITEM-24223

Thermo Elemental X Series ICP-MS Mass Spectrometer w/ Software & Accessories

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further at our facility. We are told it was working when it was last used in 2020.

It is in good cosmetic condition with minor marks.

Included with it are;

Original software on CD-ROM X Series PlasmaLab 2.6 ICP-MS software

Several manuals, safety, performance and maintenance schedule, pre-installation and operation

New and used spare skimmer and sampler cones

Spare electron multiplier

new and used spare printed circuit boards

Various tubing and connectors

Packet of various Thermo O rings

Many other unidentified small parts in sealed packaging

£ 2,000.00 (ex. VAT) 1 in stock

Pacific Biosciences PacBio RS 2 II System DNA Sequencer Lab

ITEM-09078

This system was removed from a lab as it was no longer required.

It was in full working order prior to removal from the lab.

An engineer from Pacific Biosciences prepared the system for removal from the lab, including removing all the systems cladding, but unfortunately had to cut a few cables between the main unit and the environmental chamber.

Whilst the blade server is included with the system, it has been wiped, so software may need reinstalling if you intend to use the system in full again.

Strangely the information plate on the back of the unit just says 'PacBio RS' and not 'PacBio RS II' as would be expected, but the lab called it an RS II, and the cladding on the front says RS II, so we presume this is RS II.

The engineer said that whilst getting the unit up and running again might be difficult, there is an enormous value of the system in parts. Apparently the camera part alone cost £125k.

We have not removed any parts from the system whatsoever.

£ 2,000.00 (ex. VAT) 1 in stock

Miltenyi Biotec autoMacs Pro Separator System Lab

ITEM-44488

Miltenyi Biotec Auto Macs Pro Separator System Lab

This system was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This system does not include the required Fluid Bottles, which are available for purchase from the manufacturer's website.

£ 2,000.00 (ex. VAT) 1 in stock

Fluidigm Polaris System PCR Molecular Biology Analyzer w/ Accessories Lab

ITEM-47287

Fluidigm Polaris System PCR Molecular Biology Analyzer Lab

This item was removed from a university lab where it was surplus to requirements.

It powers on and is in good cosmetic condition. We are unable to carry out further testing at our facility. The previous owner stated it was in working order when last used and that it was last serviced in 2019. \

The total run time displayed is 00:13:35:00.

Includes:

USB Keyboard
2 x Boxes Polaris Sponge Packs (P/N 101-0492), 5 per pack, EXP. 2018
2 x Boxes Polaris Single-Cell Dosing mRNA Seq IFC (5 in one box, 4 in the other)
1 x Box C1 Single-Cell Dosing mRNA Seq IFC (10 in box)

£ 2,000.00 (ex. VAT) 1 in stock

Perkin Elmer Chemagic 360 Magnetic Separator Lab

ITEM-44783

Perkin Elmer Chemagic 360 Magnetic Separator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition.

Due to the absence of a monitor or computer, further functional testing could not be conducted.

Includes:

Manual
Cables
Plastic bottles

£ 2,000.00 (ex. VAT) 1 in stock

ABB Extrel Mass Spectrometer Quadruple Mass w/ Pumps, Chiller & Various Parts

ITEM-39890

ABB Extrel Mass Spectrometer w/ Pumps, Chiller & Various Parts

This was removed from a university lab where it was surplus to requirements.

All units have been powered up unless specified. It is in reasonably good cosmetic condition with minor marks.

Molecular Beam System:

TPU 240 Pfeiffer Balzers PM P01 620 Turbomolecular Pump

Model: TPU 240

Serial#: 12087358

Item is in good cosmetic condition.

Unable to test.

Edwards Active Pirani Gauge

Model: APG-M-NW16

Serial#: 006737606

Untested

Pfeiffer Vacuum TMH 520

Model: TMH 520 IS

Serial#: 12392520

Untested

Edwards E2M 28 Vacuum Pump

Model: E2M 28

Serial#: 100203

44kg

Mass Spectrometry Stack on frame consists of:

Extrel Core Mass Spectrometers

Model: Merlin QMS Controller

Serial#: 28934

ABB Extrel Quadrupole Mass Spectrometry

Model: 150-QC Quadrouple Power Supply

Serial#: 24512

ABB Extrel Quadrupole Mass Spectrometry

Model: QMS DC Power Supply

Serial#: 23678

Edwards Active Gauge Controller

Model: Active Gauge Controller

Serial#: D38655000

Extrel Quadruple Mass Spectrometry Fan

Model: N/A

Serial#: 24561

Untested.

Pfeiffer Vacuum TCP 380 X 2

Model: TCP 380

Serial#: 7019428

MKS Baratron Power Supply and DPM

Model: N/A

Serial#: N/A

Additional Parts:

Edwards 18 E1M18 Rotary Vane Vacuum Pump

Model: E1M18

Serial#: 006727358

35kg

Edwards 2 E2M2 Rotary Vane Vacuum Pump

Model: E2M2

Serial#: 05035

30kg

Particle Measuring System Inc Condensation Particle Counter

Model: 761003

Serial#: 816

Date: Feb 1996

Pfeiffer Vacuum TCP 380

Model: TCP 380

Serial#: 7019428

Pfeiffer Blazers TCP 120

Model: TCP 120 A

Serial#: S4758

Horiba Triax Series 180 triple grating spectrometer

Model: Triax 180

Serial#: 0109-02-97

EMS Microtron 200 Microwave Power Generator Mark 3

Model: Microtron 200

Serial#: 111272

Julaba FE500 Compact recirculating cooler

Model: FE500 GB

Serial#: 9610050 4

£ 2,000.00 (ex. VAT) 1 in stock

Iskra PIO 2020 MC18-2 Class ll Microbiological Safety Cabinet on Stand Lab

ITEM-42407

Iskra PIO Class ll Microbiological Safety Cabinet Type MC18-2 on Stand Lab

This item was removed from a university lab where it was surplus to requirement.

The cabinet is in excellent condition and good working order. The unit was fitted with a 3-pin plug for testing (not included).

Specifications;

Type MC 18-2 S16
Serial No. 200273_20
Year 2020
Airflow 0.4 m/s

Features;

2 x internal power outlets
2 x internal Ethernet sockets

£ 2,000.00 (ex. VAT) 1 in stock

PHCBI Biomedical -30°C Freezer MDF-MU539HL-PE Lab

ITEM-42396

PHCBI Biomedical -30°C Freezer MDF-MU539HL-PE

This item was removed from a university lab where it was surplus to requirement.

It is in very good cosmetic condition and in good working order.

£ 2,000.00 (ex. VAT) 1 in stock

Photon Ecomax X-Ray Film Processor

ITEM-52741

Photon Eco max X-Ray Film Processor

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note: There is no power supply included.

£ 2,000.00 (ex. VAT) 1 in stock

Life Technologies Ion Torrent Ion Proton Semiconductor Sequencer Lab

ITEM-45086

Life Technologies Ion Torrent Ion Proton Semiconductor Sequencer

This item was removed from a university lab where it was surplus to requirements.

It powers on, we are unable to conduct further testing at our facility.

The item is in good cosmetic condition and includes the following:

This system includes the following:

Keyboard
184 x new Reagent tubes
80 x Reagent tube caps
Bag of Molecular probes
14 x packs of ion proton reagent tube sippers
4 x packs of ion proton wash bottle sippers
2 x packs of ion PGM Reagent bottle sipper tubes
2 x packs of chip adapters
2 x box wash 2 bottles
1 x box template OT2 supplies 200 v2 kit
1 x box template OT2 supplies 200 v2
1 x box Hi-Q sequencing 200 solutions
1 x chip kit v2- 4 pack

Specifications:

Model: Ion Proton Sequencer
S/N: 247770005

£ 2,000.00 (ex. VAT) 1 in stock

Zeiss Axiovert S100 Microscope with 3 x Objectives Lab

ITEM-44926

Zeiss Axiovert S100 Microscope

This system was removed from a university lab where it was surplus to requirements.

The unit powers on and is in fair cosmetic condition. However, there is a cracked hole at the top front of the microscope.

Included:

Blue filter
Yellow/green filter

Objectives:

Zeiss Achrostigmat 10x/0.25 (Yellow Band)
Part No.: 44 01 31
LD Achrostigmat 32x/0.40 PH1 (Green Band)
Achrostigmat 5x/0.12 (Red Band)

Eyepiece:

2 x Carl Zeiss 44 42 32 E-Pl 10x/20

£ 2,000.00 (ex. VAT) 1 in stock

Eksigent NanoLC-Ultra 2D Plus, NanoLC-as-2 Autosampler, cHiPLC LC System Lab

ITEM-42539

Eksigent NanoLC-Ultra 2D Plus, NanoLC-as-2 Autosampler, cHiPLC LC System Lab

This item was removed from a university lab where it was surplus to requirement.

Each included unit is in good cosmetic condition and power on. The previous owner has stated the system was in complete working order prior to it being decommissioned in 2020, they also noted that all required cables (Power & Connecting) are included.

System consists of;

Eksigent NanoLC-ultra 2D Plus

Serial No. 11-01-15-236

Eksigent NanoLC-as-2 autosampler

Serial No. 111271

Year 2016

Eksigent cHiPLC Nanoflex docking station

Serial No. 11-01-18-228

Eksigent eks-PS-250 power supply

DC24v/DC5v

Part No. 800-00293

Serial No. 38080411

Protek Power 24v AC adapter

Model PUP180-14

Serial No. 113475

Also included;

1 x spare Powermax ll pump for NanoLC-ultra-2D model P21NSXC-LSS-NS-15 part No. 3000621
2 x 250 Nalgene bottles with caps
3 x data cables
1 x 12 position sample tube holder
1 x 2.4 um needle part No. 5820.3010
1 tubing set 845 1/32"
3 x packs of 10 tubing sleeves
2 x lengths of 10mm tubing
5 x used sample needles
1 x pump head manifold

£ 2,000.00 (ex. VAT) 1 in stock

Thermo Scientific Barnstead Thermolyne Pyro-Clean Glassware Oven OV134510-33 Lab

ITEM-42450

Thermo Scientific Barnstead Thermolyne Pyro-Clean Glassware Oven Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in very good cosmetic condition.

Specifications;

Model OV134510-33
Serial No. 2004100457868

Included:

1 x length of unused door seal strip
1 x bag of door seal securing screws
1 x bag of door seal washers
1 x used oven tray containing catalytic pellets
1 x 50ml bottle of red gage oil

£ 2,000.00 (ex. VAT) 1 in stock

Thermo Scientific Haake SC 100 & Thermo Scientific Haake S3

ITEM-47551

Thermo Scientific Haake SC 100 & Thermo Scientific Haake S3.

This item was removed from a facility where it was surplus to requirement.

Item is in a very good cosmetic condition and in good working order.

Water temp range: 5˚c to 95˚c.

EG & Water temp range: -30˚c to 100˚c.

PG temp range: -20˚c to 100˚c.

£ 2,000.00 (ex. VAT) 1 in stock

LD Didactic Polarimeter 657591 Lab

ITEM-47700

LD Didactic Polarimeter Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent condition and in good working order.

The previous owner stated it was not used after it's purchase in 2012.

£ 2,000.00 (ex. VAT) 1 in stock

Job Lot of 50 x Motic Moticam 1 800x600 Pix Microscope Cameras

ITEM-53797

Job Lot of 50 x Motic Moticam 1 800x600 Pix Microscope Cameras

This lot was removed from a facility where it was surplus to requirement.

They are all in good working order.

Includes;

47 Motic Camera Adapters with 8mm Focusable Macro Lens
2 Motic Camera Adapters with 12mm Focusable Macro Lens
48 Motic Camera 30mm Eyepiece Adapters (2 Sealed)
Large Supply of Power Cables for the items.

£ 2,000.00 (ex. VAT) 1 in stock

Microgen Pulsifier II Microbiology Lab

ITEM-53045

Microgen Pulsifier II Microbiology Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: The door seal is worn.

£ 2,000.00 (ex. VAT) 1 in stock

Sonics Vibra Cell Ultrasonic Processor VC 130

ITEM-52533

Sonics Vibra Cell Ultrasonic Processor VC 130

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 2,000.00 (ex. VAT) 1 in stock

Hielscher UP200St-G Ultrasonic Generator Lab

ITEM-47838

Hielscher UP200St-G Ultrasonic Generator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 2,000.00 (ex. VAT) 1 in stock

New Brunswick Scientific U725 -86 Ultra Low Temp Freezer

ITEM-54708

New Brunswick Scientific U725 -86 Ultra Low Temp Freezer

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes;

New Brunswick Scientific CO2/LN2 Back-up Module

£ 2,000.00 (ex. VAT) 1 in stock

Specac Silver Gate Evolution Single ATR Spectroscope Accessories Lab

ITEM-41938

Specac Silver Gate Evolution Single ATR Spectroscope Accessories Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and good mechanical order, we are unable to test it further at our facility.

Faults:

The mirrors in the unit need cleaning; they are removable and adjustable.

Two of the top plate assemblies with part number J have stickers stating they are poor quality.

Also included are the following:

3 x ZnSe flat crystal top plate assemblies Part No. 10683-1 Part Nos. J 21967 J 21966 M27867

1 x Bottom plate with prism

1 x Concave pellet anvil Part No. GS10532

2 x User Manuals

2 x Spare "O" rings to hold anvil in place

1 x Volatiles cover Part No. GS10503

2 x Bellows to connect unit to infrared spectrometer

1 x Glass prism marked calcium and fluoride prism DRGN2 18328

1 x Storage and transport hard case

£ 2,000.00 (ex. VAT) 1 in stock

Specac Silver Gate Evolution Single Reflection ATR Spectroscope Accessories Lab

ITEM-41937

Specac Silver Gate Evolution Single Reflection ATR Spectroscope Accessories Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and in good mechanical order, we are unable to test it further at our facility.

Also included are the following:

1 x ZnSe flat crystal top plate assembly Part No. 10683-1

1 x Bottom plate with prism Serial No. H20662

1 x Flat anvil Part No. 10567

1 x Concave pellet anvil Part No. GS10532

2 x User Manuals

1 x Original Storage Hard Case

£ 2,000.00 (ex. VAT) 1 in stock

Julabo F1000 Recirculating Chiller Lab

ITEM-41568

Julabo F1000 Recirculating Cooler Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and has been fully tested. It is in good working order. (Thermometer used for testing not included).

It is in good cosmetic condition.

£ 2,000.00 (ex. VAT) 1 in stock

Leica RM2125RT Microtome Lab

ITEM-41623

Leica RM2125RT Microtome Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition with all mechanical elements in good working order, we are unable to test it further at our facility.

The unit has no sample holder.

£ 2,000.00 (ex. VAT) 1 in stock

Qiagen PyroMark Q96 ID And PyroMark Q96 Workstation Lab

ITEM-41642

Qiagen PyroMark Q96 ID And PyroMark Q96 Workstation Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This item also includes the following:

Pyromark Q96 Lab station with plastic liquid container

£ 2,000.00 (ex. VAT) 1 in stock

1958 Commer Karrier Gamecock Fire Engine Food Pizza Truck Conversion

ITEM-41735

1958 Commer Karrier Gamecock Fire Engine Food Truck Conversion

The vehicle is a non-runner and has been parked up for the last 24 months. It has been converted into a food truck and is installed with a pizza oven and other catering equipment.

Details on the issues are listed below;

Issue: A valve failure has occurred due to a gas conversion that was done on this truck. The gas conversion was not in use but remained connected to the combustion chamber, leading to the valve failure.

Actions if Required: Repair of the valve train and removal of gas conversion, these vehicles were not made for such conversions. It would require a new head gasket and accessories to go along with the head removal and replace affected valves without a full inspection to the engine I think that the minimal requirement to have a running truck again. These kind of repairs can only be carried out by a specialist.

Pizza oven dimensions are:

Opening is 53cm x Internal Width is 100cm x Depth is 120cm x Opening Height is 26cm.

The water urn wiring has been disconnected from the unit, as has the water bath.

Vehicle Details as per DVLA website:

Vehicle make KARRIER

Date of first registration: July 1958

Year of manufacture: 1958

Cylinder capacity: Not available

CO₂ emissions: Not available

Fuel type: PETROL

Euro status: Not available

Real Driving Emissions (RDE): Not available

Export marker: No

Vehicle status: Taxed

Vehicle colour: SILVER

Vehicle type approval: Not available

Wheelplan: 2 AXLE RIGID BODY

Revenue weight: Not available

Date of last V5C (logbook) issued: 3 February 2023

It is available for collection only from Lochmaben UK

All Products

Filters