PerkinElmer Clarus 480 GC Gas Chromatograph

This item was removed from a university laboratory where it was surplus to requirements.

It powers on but has not been tested further. The unit is in reasonably good cosmetic condition.

Includes:

• Main Clarus 480 unit only (no additional accessories or software included)

DYNO-MILL Type KDL Bead Mill

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and appears to be in working condition. The unit is in a reasonable, used cosmetic condition.

Includes:

• User manual

HPC Laser Model: RC2412 Laserscript Table Router Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order.

This item also includes:

1 x Control Panel.

1 x MPC6620 controller.

1 x MPC6620 User Manual. (V1.0) July 2013.

Item Dimensions:

L 300 cm x W 170 cm x H 137 cm.

Weight: 356 kg

Pair of Sport System Hydroplay Official S04106 Competition Basketball Goals

These Competition Basketball Goals are sold on behalf of a University in Scotland.

The previous client has notified us that these items are in very good condition with little use.

This mobile basketball system features two mobile and two stationary wheels that retract or extend when the unit is lifted or lowered. It includes a 15 cm thick shield covered with synthetic, washable material and tempered safety glass boards with protected lower edges.

The complete system weighs approximately 1050 kg and includes:

• Two tempered safety glass boards (180x105 cm, 12 mm thick) with edge covers
• Two basketball rings with nets
• Rear plates for anchoring to the floor

Specifications:

• Projection: 325 cm
• Required setting length: 425 cm
• Dimensions when folded: 410x185x170 cm

The system complies with FIBA standards (Level 1).

This item will require collection from: UHI Perth, located in Perth, Scotland.

These can either be sold as a pair or individually.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

1958 Commer Karrier Gamecock Fire Engine Food Truck Conversion

The vehicle is a non-runner and has been parked up for the last 24 months. It has been converted into a food truck and is installed with a pizza oven and other catering equipment.

Details on the issues are listed below;

• Issue: A valve failure has occurred due to a gas conversion that was done on this truck. The gas conversion was not in use but remained connected to the combustion chamber, leading to the valve failure.

• Actions if Required: Repair of the valve train and removal of gas conversion, these vehicles were not made for such conversions. It would require a new head gasket and accessories to go along with the head removal and replace affected valves without a full inspection to the engine I think that the minimal requirement to have a running truck again. These kind of repairs can only be carried out by a specialist.

Pizza oven dimensions are:

Opening is 53cm x Internal Width is 100cm x Depth is 120cm x Opening Height is 26cm.

The water urn wiring has been disconnected from the unit, as has the water bath.

Vehicle Details as per DVLA website:

Vehicle make KARRIER

Date of first registration: July 1958

Year of manufacture: 1958

Cylinder capacity: Not available

CO₂ emissions: Not available

Fuel type: PETROL

Euro status: Not available

Real Driving Emissions (RDE): Not available

Export marker: No

Vehicle status: Taxed

Vehicle colour: SILVER

Vehicle type approval: Not available

Wheelplan: 2 AXLE RIGID BODY

Revenue weight: Not available

Date of last V5C (logbook) issued: 3 February 2023

It is available for collection only from Lochmaben UK

Gilson Pipettes – 42 Units (6 Stands of 7) Adjustable Volume P2–P5000

This equipment is being offered for sale on behalf of a client due to being surplus to requirements.

This lot consists of 42 Gilson adjustable-volume, single-channel pipettes supplied across 6 complete stands (7 pipettes per stand). The set covers a full range of commonly used volumes including P2, P10, P20, P100, P200, P1000, and P5000, making it suitable for a wide range of laboratory applications including molecular biology, chemistry, and general lab workflows.

Gilson pipettes are widely regarded for their precision, durability, and reproducibility, making them a standard choice in research, clinical, and industrial laboratory environments.

According to the client, all pipettes are in good used condition and have been well maintained. Please note that the pipettes are not currently calibrated, and buyers should factor calibration into commissioning prior to use where required.

Included in sale:

• 42 × Gilson single-channel pipettes
• Volume ranges included: P2, P10, P20, P100, P200, P1000, P5000

• 6 × pipette stands (each holding 7 pipettes)

Please note, any additional accessories, services or documentation not specifically listed above are not included.

The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

Millipore Mobius FlexReady System CL-2 POD - MPODPILOT - MBSCB002D

This was removed from a university lab where it was surplus to requirements.

Millipore Mobius FlexReady System CL-2 POD Cart with Drawer

Model: MPODPILOT

Cat#: MBSCB002D

Serial#: F4DA03789

Year: 2014

The unit is in excellent cosmetic condition but has not been tested.

CAMAG Automatic TLC Sampler 4 with PC and winCATS Software Lab

This system was removed from a facility where it was surplus to requirement.

Perkin Elmer AAnalyst 200 Atomic Absorption Spectrometer Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Bigneat Robotics Enclosure Cabinet RB3200/01

This item was removed from a university laboratory where it was surplus to requirements.

It is in very good cosmetic condition and in good working order.

Please Note; This item will require reassembling and recommissioning once purchased.

Includes:

• LAC2 Class II type airflow system
• Integrated Ergotron PC and monitor arm
• Eight fitted castors for mobility
• Two lower storage compartments (110 x 100 x 57cm each)
• Opening window aperture (218 x 110cm) for equipment access

Specifications:

• Airflow: > 0.4m/s
• Downflow air changes per hour: 0.25 - 0.5
• External dimensions: 320 x 118 x 240cm (l x w x h)
• Internal cabinet dimensions: 317 x 115 x 115cm (l x w x h)
• Running hours since last service: 134.1

Model: RB3200/01

Serial No.: 66166/RB3200

Year: 2007

Wild Leitz GMBH Fluovert FU 090-128.017 Inverted Microscope w/ 2 x Objectives Ph

This item was removed from a university laboratory where it was surplus to requirements.

The microscope is in reasonable cosmetic condition, with a crack at the bottom of the unit.

It could not be fully tested as the power supply required for the lamp was not included.

Includes:

• Leitz EF L 20/0.32 PHACO1 160/- objective (519436)
• Leitz EF 10/0.25 PHACO1 160/- objective (519767)
• Leitz 2 × Periplan GF 10x/18 M eyepieces
• Carl Zeiss S-PL 10x/20 eyepiece

Model: FU 090-128.017

Edwards iQDP80 Dry Vacuum Pump

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but we have been advised by the previous owner that it is not in working order, therefore, it is listed as Spares/Repair.

Serial No.: M109880

Model: 3XIQDP80

Manufacturing Date: 21.11.00

Power supply cable & control module not included.

Esco Labor Model EL3 Dual Agitated Vacuum Laboratory One-Pot Homogeniser

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition. The unit cannot be powered on as the control panel is not included, and it has not been PAT tested for this reason. The previous owner stated that it was in working order prior to removal.

Model: EL3

This Dionex HPLC System was removed from a university lab where it was surplus to requirements.

The system is in reasonable cosmetic condition, but some parts are heavily stained and have sustained minor surface damage.

All included units power up and have passed self-tests, we are unable to test them as a system at our facility.

Included with this system are the following:

1x Dionex Photodiode Array Detector

Model: PDA-100

P/N: 057060

1x Dionex RF 2000 Fluorescence Detector

S/N: C2095377023OUS

P/N: 5057.0020

1x Dionex Thermostatted Column Compartment TCC-100

S/N: 2850410

P/N: 5710.0000

1x Dionex UCI-100 Universal Chromatography Interface

S/N: 2620102

P/N: 5911.0010

1x P680A LPG-4 HPLC Pump

S/N: 2780421

P/N: 5030.0015

1x Solvent Rack SOR-100

S/N: 3060402

P/N: 5030.9200

Sorvall Discovery 100SE Ultracentrifuge - No Rotor Included Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

It was tested using a Sorvall A1256 rotor (Not included.)

Nikon Eclipse TE300 Inverted Fluorescence Microscope

This item was removed from a university where it was surplus to requirements.

The microscope powers on and produced a clear slide image when tested with an in-house objective (not included).

It is in good cosmetic condition, however, the protective visor has snapped off. This does not affect its functionality.

Included:

• Nikon Power Supply (Model: TE-PSE30, S/N: 4010214)
• Q Imaging QI Click Camera (Model: 01-QIClick-F-M-12, S/N: Q28643)
• 2 x CFI 10X/22 Eyepieces

Specifications:

• Model: TE300
• S/N: 533589

Leica DMR Type 020-525.735 Fluorescence Microscope Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on with the bottom-mounted lamp in good working order.

We are unable to test the top-mounted lamp as the required power supply is not included.

Includes with the microscope are the following:

• Leica MPS 60 Camera
• Leica ∞/0.17 C Plan 100x/1.25 Oil Objective
• Leica ∞/-/A N Plan 5x/0.12 Objective
• 504058 Leica Illuminator
• Leica 807-072.057 Lamp Module (damaged)
• Box of misc tools and accessories

Julabo F1000 Recirculating Cooler Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and has been fully tested. It is in good working order. (Thermometer used for testing not included).

It is in good cosmetic condition.

BioNex Nanodrop W/ NS-2 Stage & UVR-M Chamber System Lab

This system was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition, we are unable to test it further at our facility.

Includes:

• UVR-M Chamber
• Nanodrop
• NS-2 Stage
• 2 x Honeywell Burdick and Jackson bottles
• Gilson 11727IN Nanobuilder Software disk
• Various cables
• Various Nanodrop parts and accessories

Leybold Trivac D40B & RUvac WAU251 Vacuum System

This item was removed from a university laboratory where it was surplus to requirements.

This item is a combination of Leybold Trivac D40B and RUVAC WAU251 3-phase vacuum pumps. According to the previous owner, both units are in working condition; however, no further testing has been conducted on-site.

Specifications:

Leybold RUVAC:

• Type: WAU251
• Catalog No.: 11721
• Serial No.: B891200093

Leybold TRIVAC:

• Type: D40B
• Catalog No.: 112 86
• Serial No.: A881100069

Knauer BlueShadow Pump 40P HPLC Laboratory Pump

This item was removed from a facility where it was surplus to requirements.

It is in very good cosmetic condition and powers on. We are unable to test it further at our facility.

The power supply is included.

Technical Specifications

• Pump Type: High-pressure dosing pump
• Flow Rate Range: 0.001 – 10 mL/min
• Flow Rate Increment: 0.001 mL/min
• Maximum Flow Rate: 10 mL/min (with 10 mL pump head)
• Maximum Pressure: 650 bar (65 MPa / 9430 psi)
• Flow Rate Accuracy: ±1% (measured at 5–80% of flow range using ethanol)
• Flow Rate Precision: <0.1% RSD
• Pulsation: <2% amplitude (typically <1.3%) or <0.3 MPa (3 bar), whichever is greater, at 1 mL/min ethanol, at all pressures >1 MPa (10 bar)
• Maximum Viscosity: 100 mPa·s
• Liquid Temperature Range: 4–60 °C (standard); up to 120 °C with high-temperature pump head
• Pump Head Materials: Stainless steel; ceramic options available for biocompatibility
• Wetted Materials: Graphite fiber reinforced PTFE (GFP), sapphire, ruby
• Gradient Capability: Isocratic
• Piston Seal Wash: Active
• Purge Valve: Manual
• Integrated Pressure Sensor: Yes
• Smart Drive Control: Enhanced technology to actively prevent pressure ripple
• Low Dead Volume: Yes
• Inline Filter: Built-in​

Thermo Scientific S52-ST Swinging Bucket Rotor 52000rpm 4 x 5ml Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

• Rotor: S52-ST (52K RPM)
• Buckets: 4 x 5ml (0134)

Beckman Biomek FXP System with Accessories, Newport Isolation Tables, and Consumables

This item is sold on behalf of a client where it is surplus to requirements.

This system is in complete working order, and in good cosmetic condition.

The system comprises the following:

• Beckman Coulter Biomek FXP liquid handling system (model FXP-578831) – unassembled
• Two anti-vibration tables
• Thermo Scientific Cytomat Microplate Hotel (model 622855)
• FluidX XSD-96 Pro
• Various tip consumables (20–30)
• Some components already packaged in bubble wrap from previous relocation

The system was last in known working condition approximately two years ago at the previous institution before being packed for transport. It has not been assembled or tested since relocation and is currently stored in a disassembled state.

Includes:

• Beckman Coulter Biomek FXP (FXP-578831)
• Two anti-vibration tables
• Thermo Scientific Cytomat Microplate Hotel (622855)
• FluidX XSD-96 Pro
• Tip consumables (20–30)

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Beckman Coulter Cytomics FC 500 System w/ PC & Software – Lab Equipment

This system was removed from a university laboratory where it was surplus to requirements.

The Cytomics FC 500 is in good cosmetic condition, though we were unable to power it on due to facility limitations in testing Class 3+ laser systems. The previous owner indicated that it was in good working order when last used, but it has not been operated in several years.

No further testing has been carried out, and the system is therefore sold as seen.

Included Components

• PC and monitor
• Cytomics USB Box
• Various cables
• Used sheath filter
• Laser power supply unit (PSU)
• Some tubing
• Some spare parts
• Waste bottle
• Cytometry UPS (Serial No. AL07035)

Installed Software

• CXP Analysis
• CXP Cytometer
• FC Off
• FC On (Warm Up)
• FlowCytomix Pro

ISI ABT Scanning Electron Microscope (SEM) ABT-55

This was removed from a university lab where it was surplus to requirements. We are told it was in working order prior to being put into storage some time ago

Included are;

ISA ABT 55 Main Control Unit

With 25cm CRT monitor

Control desk with all control switches and buttons

Microscope ABT 55 Unit

Serial No. K244149

Year 1989

Controls for vacuum system, not included

ETP Sempra Robison Detector Head and Control Module

Model PSM-11-4

Serial No. 524

The main units were not powered up due to no plug on the main power supply unit, it was previously hard wired.

The Robinson Detector unit powered on and displayed readiness lights.

Accessories:

5 x used spare copper columns

4 x small aluminium fitting plates

Operators Manual

4 x 15 amp fuses

Filament cartridge

Beckman Coulter Cyan ADP Flow Cytometer

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Waters HPLC System 717plus, 486 TAD, 2487 Detector, 1525 Binary Pump Lab

This system was removed from a facility where it was surplus to requirement.

All modules are in good cosmetic condition and power on, we are unable to test it further at our facility.

The previous owner stated it was in working order when it was last in operation.

System comprises of the following:

• 1525 Binary HPLC Pump 25P S/N C0225P004F
• 2487 Dual λ Absorbance Detector WAT081110 S/N D02487 461M
• 717+ Autosampler 71P WAT078900 S/N C0271P 886M
• 486 Tunable Absorbance Detector S/N MX3MM7502M
• Column Heater 186001500 S/N L015CH 358M

Also comes with:

• Breeze Software Tutorial Disk
• Windows NT Easy Restore V3.2 Disk
• Maintenance and Troubleshooting Disk
• Breeze Software Disk
• Various comms cables

Biotage TurboVap II Sample Evaporator & 10x 200ml Biotage Tubes Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

PHCBI CO2 Incubator Model MCO-170AICD-PE With Tray and Shelves Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included). It has been fully CO2 and temperature tested.

It is in excellent condition internally and externally.

This item features the following:

4 x shelves: 47 x 45

1 x Stainless Humidity Water Pan: 44 x 25 x 7cm

PHCBI CO2 Incubator Model MCO-170AICD-PE With Shelving And Tray Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order. it has been fully temperature and CO2 tested.

It is in very good cosmetic condition internally and externally.

This item includes the following:

2 x Shelves: 47 x 45 cm

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order. It has been fully temperature and CO2 tested.

It is in very good cosmetic condition internally and externally.

This item includes the following:

3 x Shelves: 47 x 45 cm

1 x Humidity Water Tray: 44 x 25 x 7 cm

Binder CB 170 CO2 Incubator Lab

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and in good working order.

PHCBI CO2 Incubator Model - MCO-170AICD-PE Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

Also includes the following:

1 x Shelf:  47 x 45 cm

Rodwell Ensign 125 Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.

The item is due for a service, and no further testing was conducted.

The previous client has stated it was in working order prior to removal.

Specifications:

• Model: Ensign 125
• Serial No.: 1861
• M24 Controller

Rodwell Ensign 125 Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.

The item is due for a service, and no further testing was conducted.

The previous client has stated it was in working order prior to removal.

Specifications:

• Model: Ensign 125
• Serial No.: 2295
• M24 Controller

Priorclave PS/QCS/SV100 Top Loading Autoclave

This was removed from a university lab where it was surpus to requirements.

The unit powers up but has only been partially tested as it requires a steam generator, which we do not have.

It is in good cosmetic condition with minor marks.

Priorclave PS/QCS/SV100 Top Loading Autoclave

This was removed from a university lab where it was surpus to requirements.

The unit powers up but has only been partially tested as it requires a steam generator, which we do not have.

It is in good cosmetic condition with minor marks.

Affymetrix GeneChip Scanner 3000 System with 4 x Affymetrix Fluidics Station 450

This system was removed from a university laboratory where it was surplus to requirements.

The system was fully connected, and the scanner successfully communicated with the PC. All Affymetrix Fluidics Station 450 units were tested by running various test programs, which they all passed. Based on the available testing, the system appears to be working as it should.

Software installed on PC:

• Affymetrix Launcher
• Expression Console – Build 1.4.1.41
• Transcriptome Analysis Console – Version 3.1.0.5
• Affymetrix GeneChip Command Console Viewer – Version 4.1.2.1567
• Affymetrix GeneChip Command Console Scan Control – 4.0.0.1567
• Affymetrix GeneChip Command Console Fluidics Control – 4.0.0.1567

The system comprises the following:

• Affymetrix GeneChip Scanner 3000 7G with AutoLoader
• Model: AutoLoader
• Serial No.: A17990
• Part No.: 90-0351
• Condition: Powers on; great condition with minimal wear.
• Affymetrix GeneChip Scanner 3000 7G
• Serial No.: 54726240
• Part No.: 54726240
• 2 x Affymetrix Fluidics Station 450
• Model: GeneChip Fluidics Station 450
• Serial Nos.: 60102840, 60132140
• Part No.: 00-0079
• 2 x Affymetrix Fluidics Station 450
• Serial Nos.: FS1451, 60102960
• Part No.: 00-0079RS

Accessories included:

• User manuals for Expression Console Software 1.4 and Affymetrix GeneChip Command Console (AGCC) 4.0
• Symbol DS9808 scanner with stand, manuals, and software (new and unopened)
• Spare parts for one Affymetrix Fluidics Station 450, marked with “The Valve Removed Motor good etc” on a red tag

Agilent 6850 Network GC System w/ 6850 Series Auto Sampler Chromatography

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Dilor XY-800 Double Monochromator Spectrometer w/ Nitrogen Cooled CCD Detector

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

System includes:

• Dilor Main unit XY-800
• ISA Spectrum One S/N E68
• Olympus BH-2 Microscope.  (2 objectives MDPlan 5 0.10 & MDPlan 50 0.75)
• Dilor Control Box S/N XY 151.
• ISA SpectrumOne CCD-2000 S/N 0848B
• Schott KL1500 Light source
• Dilor Control Rack
• Shibaden Video Monitor S/N 010489
• Siemens Xpert PC S/N YAQU595166
• ViewSonic VA703M-4 VS11366 S/N QAP072182977
• UniPhase Helium Neon Gas Laser 1508-0 S/N 527188) (The power supply is broken but still supplied to provide information on Voltage, amps and polarity. 12V 550mA Centre+
• Various cables and manuals

Caliper LifeSciences Sciclone G3 / G3T Liquid Handler System

This system was removed from a facility where it was surplus to requirement.

It powers on with no faults noted.

• Inheco Multi Tech Control
• Model - Multi Tech Control
• S/N - 2084

Accessories

• HP PC
• Broken HP Monitor

Also comes with 3 USBs:

• 2 x Maestro 6.3
• 1 x Inheco Backup

Zeiss Axioskop 2 System Power Supply

This system was removed from a university lab where it was surplus to requirements.

All included units power on and are in good cosmetic condition.

The previous client has stated this system was in full working order prior to removal.

The system includes the following Zeiss objectives, all of which are producing clear images and are in good condition with no scratches:

• Zeiss Plan-NEOFLUAR 20X/0.50 (1004-072)
• Zeiss Epiplan 10X/0.20 HD (44 29 34)
• Zeiss Plan-NEOFLUAR 40X/0.75 (44 03 50)
• Zeiss Epiplan 50X/0.70 HD (44 29 54)

Additional components:

• Jena GmbH ebq 100 Isolated Power Supply (Model: ebq 100 isolated-z/101 26f, S/N: M 47415479)
• 2 x HAL 100 Lamps (1039-685, 44 72 19)
• 1 x HBO 100 Lamp 1007-980
• Imagingsource DFK 41AFO2 Camera
• 2 x Zeiss W-Pl 10x/23 Eyepieces (45 50 43)

Please note, there is no mercury bulb included.

Thermo Scientific Surveyor MSQ Plus Mass Spectrometer System

This item was removed from a university where it was surplus to requirements.

The system is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Additionally, the client has reported that all hardware is functioning correctly.

Included Components:

• APCI Probe
• 2 x Bottles
• 20 x Thermo Corona APCI Needles

Specifications:

• Model: Surveyor MSQ
• Serial No.: MSQ21121

FUJIFILM Dri-Chem NX500 Clinical Dry‑Chemistry Analyser Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The lab confirmed it was in good working order prior to removal.

Thermo Scientific MSC-Advantage Class 2 Biological Safety Cabinet Type MSC 1.2 (2017)

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and in complete working order. (Socket tester not included.)

Specifications;

• Model - MSC 1.2
• S/N - 420677754
• Working Volume 1200 x 780 x 465 mm

Zeiss AxioSkop 2  Microscope w/ 3 x Objectives 20/40/100x Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good used condition.

The microscope has been tested using in-house slides and is in good working order.  (test slide not included)

AxioSkop 2 Main Body

• Zeiss 45 23 44 Trinocular head with camera port
• Zeiss 45 21 87 Filter Cube fitted
• Zeiss 45 35 60 Specimen/Object Guide
• Zeiss 45 35 50 Rotary Stage
• Zeiss 44 54 39 Condenser
• Zeiss 44 72 19 HAL 100 Halogen Lamp

• Objectives:
• AmScope 20/0.40, 160/0.17 (Brand New)
• AmScope 40/0.65, 160/0.17 (Brand New)
• Zeiss Plan-NEOFLUAR 100x/1.30 Oil, ∞/0.17, 44 04 80

• Eyepieces:
• 2 x Zeiss 45 50 43 W-Pl 10x/23 Eyepieces

Applied Biosystems Hitachi 3130 Genetic Analyzer

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The lab confirmed it was in good working condition prior to removal, however it does not include a working capillary array (4 channel).

Also includes the following items:

3130 Genetic Analyzer Data Collection Software

3130 Genetic Analyzer Calibration File 627-4161 S/N - 18323-017 (Floppy Disc)

3130 Genetic Analyzer Operator Training - P/N -4365947 (CD)

3130 Genetic Analyzer Documentation - P/N -4362019 (CD)

31XX Family Service Tools - P/N -4361102 (CD)

3130 Genetic Analyzer Data Collection Software v3.0 - P/N -4363485 (CD)

Persistence JNDI-Library - P/N -4347111 (CD)

PowerQuest V2i Protector 2.0 Desktop Edition (CD)

SeqScape Software Version 2.5

ABI Prism SeqScape Software Version 2.x Tutorial (Booklet)

SeqScape Software Version 2.5 User Guide (Booklet)

GeneMapper Software Full Install Version 4.0

GeneMapper Software v4.0 Full Install - P/N -4367070 (CD)

GeneMapper Software v4.0 Documentation - P/N -4366876 (CD)

GeneMapper Software Version 4.0 Installation and Administration Guide (Booklet)

GeneMapper Software Version 4.0 Reference and Troubleshooting Guide (Booklet)

GeneMapper Software Version 4.0 SNaPshot Kit Analysis Getting Started Guide (Booklet)

GeneMapper Software Version 4.0 SNPlex System Analysis Getting Started Guide (Booklet)

GeneMapper Software Version 4.0 Loss of Heterozygosity LOH Analysis Getting Started Guide (Booklet)

AB DNA Sequencing Analysis Software v5.2

AB DNA Sequencing Analysis Software v5.2 - P/N - 4363737 (CD)

AB DNA Sequencing Analysis Software v5.2 Patch 2 - P/N - 4366168 (CD)

SeqScape Analysis Software v2.5 - P/N - 4363736 (CD)

ABI Prism SeqScape Software v2.5 - P/N - 4352544 (CD)

DNA Sequencing Analysis Software Version 5.1 for Windows XP and 2000 Platforms User Guide (Booklet)

BigDye Terminator v3.1 Cycle Sequencing Kit Protocol (Booklet)

2 X 3100 Avant Capillary Array 36 cm Part No. - 4333464

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in very good cosmetic condition internally and externally.