All Products

£ 700.00 (ex. VAT) 1 in stock

Pfeiffer TCP040 Power Supply Lab

ITEM-41313

Pfeiffer TCP040 Power Supply

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, it is untested as we are unable to test it further at our facility.

Run Time: 10797.0

£ 700.00 (ex. VAT) 1 in stock

Canon XF305 HD PAL Video/Camera Camcorder and Manfrotto 755XB Tripod

ITEM-41741

Canon XF305 HD PAL Video/Camera Camcorder and Manfrotto 755XB Tripod

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in full working order.

All items included are as follows:

1 x battery BP-970G Serial No. 201311
Charger Power Adapter CA-930 No. BCC
Manfrotto 755XB tripod and head No. A3289340 (Height from 70cm to 149cm)
Shoulder soft carry bag for camera
Shoulder soft carry bag for tripod
Power lead
Data transfer cable
Lens cap

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Corbett Research Rotor-Gene RG-3000 Lab Spares/Repairs

ITEM-25811

This was removed from a university lab where it was surplus to requirements.

The unit powers up but when we tried to connect it to a PC with software we had some issues. (Software not included).

We installed software on a test PC and it did seem to connect to the RG3000, but it is stating that there is a Fatal Hardware Malfunction. The machine can't be used until the distributor has service it. After starting it again we got another error: Thermistor is Open.

We have removed the casing to check inside the unit and cannot find any obvious issues.

There is an LCD panel inside that is showing 'TEMP OVER 140/127.5/2.1/152.0'. This displays as soon as the unit is switched on, so it looks like there is some sort of temperature error happening. There are 4 x PTC EPCOS C810 Thermistors in the power supply section of the unit. It's possible that there is a fault with at least one of those.

It is in otherwise reasonable cosmetic condition with marks from use, but is sold for spares/repairs

The item holds up to 72 x 0.1ml strip tubes.

£ 700.00 (ex. VAT) 1 in stock

Lowara E-SV 10SV18F075T Vertical Multistage Pump Lab

ITEM-41473

Lowara E-SV 10SV18F075T Vertical Multistage Pump Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, and powers on, we are unable to test it further at our facility.

This item is fitted with 3-Phase 32amp plug.

£ 700.00 (ex. VAT) 1 in stock

Shimadzu UV-2101PC Spectrophotometer & PC with Software Lab

ITEM-29677

Shimadzu 2101PC Spectrophotometer & PC Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The following software is installed on the PC:

Shimadzu Kinetics
Photometric
UVPC

System: Windows 98, Second Edition, 4.10.2222A.

£ 700.00 (ex. VAT) 1 in stock

BECKMAN Model J2-21 Floor Standing Centrifuge Lab

ITEM-21249

This BECKMAN Model J2-21 Floor Standing Centrifuge was removed from a university lab where it was surplus to requirements.

The unit is in full working order but is not supplied with a rotor.

It is in reasonably good cosmetic condition but has cracks on the door hinge and latch.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Infors Minitron Shaking Incubator Model AI 72 Lab Spares/Repairs

ITEM-44641

Infors Shaking Incubator Model-AI 72 Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition, but the door does not remain shut. The unit powers on, however, when setting the desired temperature, it remains at ambient temperature and does not raise to lower.

Therefore, it is listed as Spares/Repair.

£ 700.00 (ex. VAT) 1 in stock

4 x APC Smart-UPS Line Interactive 2200VA Tower 230V Lab

ITEM-37183

4 x APC Smart-UPS Line Interactive 2200VA Tower 230V Lab

These items were removed from a university lab, where they were surplus to requirement.

All items are in very good cosmetic condition and powered up, all items display 0% Battery, therefore we are unable to test them further.

Model: Smart UPS 2200

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Sanyo MIR-553 Incubator Lab Spares/Repairs

ITEM-36207

Sanyo MIR-553 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but the power relay is short circuited so it runs overtemp.

It is sold for spares/repairs.

£ 700.00 (ex. VAT) 1 in stock

Surgipath 04501GFS-240 Premier Dispensing Console Lab

ITEM-39972

This Surgipath 04501GFS-240 Premier Dispensing Console was removed from a university lab where it was surplus to requirements.

The item powers on and is in a reasonably used cosmetic condition.

All compartments successfully heat independently as displayed on the screen, unable to test further at our facility.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Beckman L8-60MR Ultracentrifuge Lab Spares/Repairs

ITEM-39709

Beckman L8-60MR Ultracentrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and was tested with a Beckman 70.1 Ti rotor from another item (Not included), but would not reach over 3000rpm (Rotor max is 10000). We suspect there is a vacuum issue as the vacuum light flashed red during testing. The system also will not cool down.

It is in otherwise good cosmetic condition.

It is sold for spares/repairs.

Beckman L8-60MR Ultracentrifuge

Model: L8-60MR

Serial#: 6H816

Year: 1988

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova U725 -86 G Ultra Low Temperature Freezer Lab

ITEM-40064

New Brunswick Scientific Innova U725-G Ultra Low-Temperature Freezer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on but shows power fail after 5 mins and will not run, therefore, it is listed as Spares/Repair.

£ 700.00 (ex. VAT) 1 in stock

Canon Microprinter 90 Microfiche Microfilm Reader and Printer Lab

ITEM-37719

This Canon Microprinter 90 Microfiche Microfilm Reader and Printer was removed from a university lab where it was surplus to requirements.

This item is in good cosmetic condition and powers up, but we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

Sartorius EB35EDE-IX Industrial Laboratory Scales Lab

ITEM-44655

Sartorius EB35EDE-IX Industrial Scales Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order. As seen, it is powered with a 3-Pin 16A non-standard 1-phase plug.

It was tested with an in-house 200g Calibration weight.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Job Lot of Mixed Benchtop Lab Equipment - Corning, UVP, Bio-Rad Lab

ITEM-38988

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

ITEM-39784 Various Chromatanks and Glassware

ITEM-39785 Scientific Software SS420X

ITEM-37446 Chiltern Magnetic Stirrer

ITEM-37447 Hanna Magnetic Stirrer

ITEM-37450 Hawksley Mirco Haematocrit MK IV

ITEM-37451 Corning Hotplate Stirrer PC-351

ITEM-37449 14 x Rexaloy table mount Gasbottle brackets (boxed)

ITEM-37448 2x Gasarc Techmaster regulators

ITEM-37452 2x GSE Druva Gas Regulators

ITEM-36612 BioRad 680 XR Microplate Reader

ITEM-39107 fisher scientific topmix fb15024

ITEM-39108 Techne Dri-Block DB.2A

ITEM-39109 Cole-parmer ultrasonic cleaner

ITEM-39110 Whirlmixer

ITEM-39786 Column Block Heater

ITEM-39111 Drummond Pipet-Aid

ITEM-39112 SwiftPet Pro

ITEM-39113 Thermal flask Sanso D-2000

ITEM-39114 UVP transilluminator

ITEM-36613 Beckman Coulter Centritube Slicer

ITEM-39115 Fisher scientific fb15012 topmix

ITEM-37054 Biorad Protean II xi Cell

ITEM-37055 2x Biorad TV50 Units

ITEM-37056 Pore Gradient Lipoprotien Electrophoresis System LPE-4003

ITEM-37057 Electrophoresis Dock

ITEM-37058 Kyowa Tokyo Binocular Compound Microscope

ITEM-39116 KNF VP Series

ITEM-39237 Sanyo Micro Centaur

ITEM-37059 Biorad Protean IEF Cell + trays

ITEM-39238 Oxoid Plate Shaker

ITEM-37060 5x Dalt II LF glass set of 3 (gel slot)- packaged

ITEM-37061 set Dalt II Gel slot blank inserts

ITEM-37062 Amersham Biosciences Ettan IPGphor isolelectric focusing system

ITEM-37063 Amersham Biosciences Dalt six Electrophoresis Unit

ITEM-37064 11x Biorad Protean IEF Disposable trays (17cm) with lids (opened)

ITEM-37065 Biorad Protean IEF Disposable Trays (25pk / 7cm with lids) boxed

ITEM-37066 Ettan Dalt six Gel Caster

ITEM-37067 Slab Gel Dryer

ITEM-37068 2120 Varioperpex II Pump

ITEM-37069 Ettan Dalt Si Electrophoresis Unit

ITEM-37070 Kenwood K Mix Blender

ITEM-37071 BOC Multistage Regulator (boxed)

ITEM-37072 GasArc Spec Master Regulator

ITEM-37073 Concoa Precision Gas Controls single stage Regulator (boxed)

ITEM-37074 Concoa Precision Controls Single Stage Regulator (boxed)

ITEM-37075 Brennensthul Signograph 25

ITEM-39793 Cairn Optoscan PSU, Arc Lamp PSU & Data Interface

ITEM-39795 Lambda SC

ITEM-37077 Hanna HI 1990M Magnetic stirrer

ITEM-39796 Scientifica Slice Platform

ITEM-37078 JVC KY-F55B Microscope Video Camera Nikon mount

ITEM-39246 Bio-Rad PowerPac Basic

ITEM-39245 Bio-Rad PowerPac Basic

ITEM-39244 Bio-Rad PowerPac Basic

ITEM-37079 4x Gas cylinder wall mounted brackets

ITEM-39877 Microscope stage plate and parts

ITEM-37082 Kenwood Chef Food processor

ITEM-39247 Bio-Rad PowerPac HC

ITEM-39248 Bio-rad Shock Pod

ITEM-39249 Lot of various sized cooler boxes

ITEM-39250 Fisher FB15012 TopMix Mixer

ITEM-39251 Lot of electrophoresis items

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Job Lot of Miscellaneous Microscope Parts And Laser Parts Lab

ITEM-45547

Job Lot of Miscellaneous Microscope Parts And Laser Parts

This job lot of items come from a university, where they were surplus to requirement.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

£ 700.00 (ex. VAT) 1 in stock

ESEWAY Hardness Tester SPV2P Lab

ITEM-45098

ESEWAY Hardness Tester SPV2P

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

Sound Engineering Rack with Mixing Modules TDT Tucker Davies Technologies Lab

ITEM-44972

TDT Tucker Davis Technologies Audio Processing System

This system was removed from a university lab where it was surplus to requirements.

All units power on but have not been tested further. The system includes a number of cables.

Modules (Front, Top to Bottom):

System ID 3035

MA3 Stereo Microphone Amp
RP2.1 Enhanced Real Time Processor
PA5 Programmable Attenuator
SM5 Signal Mixer

System ID 2901

MA3 Stereo Microphone Amp
RP2.1 Enhanced Real Time Processor
PA5 Programmable Attenuator
SM5 Signal Mixer

Back Units:

Daxten Scout Combo
Parasound Zamp v.3 Zone Amplifier

All items are in good cosmetic condition.

£ 700.00 (ex. VAT) 1 in stock

Perkin Elmer Sample Pan Press Lab

ITEM-44704

Perkin Elmer Universal Crimper Press Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good mechanical order.

£ 700.00 (ex. VAT) 1 in stock

MSE Mark No2 Consolidation Testing System Controlled Rate of Strain 2726 Lab

ITEM-44393

MSE Mark No2 Consolidation Testing System Controlled Rate of Strain 2726

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

Optikinetics Opti GoBoShow Projector

ITEM-39904

This Optikinetics Opti GoBoShow Projector was removed from a university lab where it was surplus to requirements.

The item's cosmetic condition is very good.

It is fully operational with the lamp functioning correctly.

£ 700.00 (ex. VAT) 1 in stock

Large Safety Cabinet/Cupboard fitted with Gas Regulators Lab

ITEM-39050

Large Safety Cabinet/Cupboard fitted with Gas Regulators

This was removed from a university lab where it was surplus to requirements.

The unit is untested but in reasonably good cosmetic condition.

£ 700.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek Robotic Transport A23467 & Two ALP Plate Movers Lab

ITEM-38067

Beckman Coulter Biomek Robotic Transport and Two ALP Plate Movers

This system was removed from a university where it was surplus to requirement.

All items are in very good cosmetic condition but are untested due to the control system not being included.

The system consists of the following:

Biomek Robotic Transport

Serial No. 2950119

XP Power PSU with 24v outlet for Biomek Robotic Transport

Model PUP110-14-S

2 x Biomek Alp Conveyers, both with Microscan barcode readers

Serial Nos. A16512AD1011110002. 394426AD0811100001

Microscan barcode readers

Model MS-710

Serial Nos. 0904608 1221144

£ 700.00 (ex. VAT) 1 in stock

Tilta BS-T03 Follow Focus Shoulder Plate And MB-T03 Carbon Fibre Matt Box

ITEM-38019

Tilta BS-T03 Follow Focus Shoulder Plate And MB-T03 Carbon Fibre Matt Box

Shoulder Plate Kit

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition, we are unable to test it further at our facility.

The kit includes the following:

1 x monitor arm

1 x tripod mount

1 x 80mm lens adaptor

1 x 95mm lens adaptor

1 x follow focus handle

1 x hard carry case

1 x 40cm steer whip

1 x 50cm steer whip

1 x top hand grip

1 x 0.5M pitch gear

1 x 0.6M pitch gear

1 x lens supporter

2 x allen keys

2 x 10cm rods

1 x nun's knickers

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Autoclave Engineers Model 300mL EZ Seal w/ Control Tower Lab

ITEM-37161

Autoclave Engineers Model 300mL EZ Seal w/ Control Tower Lab

This system was removed from a university where it was surplus to requirements.

Both units are in good cosmetic condition, however, they have not been tested beyond that due to the system being a visual PAT fail, it is being sold for Spares or Repair.

Includes the following;

1x Autoclave Engineers unit

Model: E010HM0210C112B200121E2101

1x Control tower

Model: C1211224300010C

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Applied Biosystems Mariner Biospectrometry Spectrometer Workstation Mass Spec

ITEM-19492

This Applied Biosystems Mariner Biospectrometry Spectrometer Workstation was removed from a university lab where it was surplus to requirements.

All the parts are in good cosmetic condition but do have various marks and signs of general use.

The unit powers up but makes a burning smell. It is sold for spares/repairs.

The system consists of:

1 x Applied Biosystems Mariner Bispectrometry Spectrometer.

Also comes with various extra parts;

2 x Electrospray units.

1 x Nanospray unit in a box with 2 x Genwac Cameras attached.

1 x 'Electronics box' from old Mariner.

1 x Bag of spare fuses.

1 x Waste Bottle.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Carl Padberg Zentrifugenbau Filter Centrifuge LE Lab Spares/Repairs

ITEM-36357

This Carl Padberg Zentrifugenbau LE was removed from a university lab where it was surplus to requirements.

The cosmetic condition of this item is fairly good and it has powered on.

We set the unit to 20,000rpm. It does ramp up quite slowly to speed. It reached 21,000+ and started to hold speed.

We're not sure how accurate the speed adjustment is. It didn't seem to fully hold at 20,000rpm, it kept slowly rising. The belt looks like it needs replacing too.

For this reason, It is sold for spare/repairs

The speed range is from 15000 to 40000 rpm.

Additionally included:

1x New Brunswick Scientific power supply switching/speed selection unit

1x Huber and Moser motor

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine (Missing Propeller)

ITEM-36238

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine (Missing Propeller)

This was removed from a university marine department. It was surplus to requirements.

Included are;

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine with Gearbox

Model: E40DPLIIS

Serial#: 05306542

The item appears to be in reasonably good condition.

It is missing the propeller and is possibly missing additional elements but we are unable to confirm.

The engine Cowl & Lower Engine Side Covers are Included but not assembled to the engine.

Evinrude E-Tec 40 Engine Cowl

Part#: 353643

Item is in good used cosmetic condition.

Evinrude E-Tec 40 Port Side Lower Engine Side Cover Left

Part1#: 350 499

Part2#: 350 809

Part3#: 350 603

Evinrude E-Tec 40 Port Side Lower Engine Side Cover Right

Part1#: 350 498

Part2#: 350 652

Part3#: 350 8608

Item is in good used cosmetic condition.

£ 700.00 (ex. VAT) 1 in stock

Mitsubishi Freqrol - A500 Inverter Lab

ITEM-31520

Mitsubishi Freqrol - A500 Inverter Lab

Model: FR-A520-3. 7K

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition.

We are unable to test this item as it requires a connection to a larger system.

£ 700.00 (ex. VAT) 1 in stock

Edwards Freeze Dryer Modulyo Lab

ITEM-39926

This Edwards Freeze Dryer Modulyo was removed from a university lab where it was surplus to requirements.

The item powers on and is in reasonably poor cosmetic condition, unable to test it further at our facility.

It cools down but has not been tested under a vacuum.

£ 700.00 (ex. VAT) 1 in stock

Ophir Orion-PD-ROHS Laser Power Meter Lab

ITEM-44663

Ophir Orion Laser Power Meter

This item was removed from a university laboratory where it was surplus to requirements.

The laser power meter is in good cosmetic condition but does not power on unless connected to a power supply unit (PSU). It functions properly when powered via a PSU; however, the battery needs replacing.

A modified PSU has been included to accommodate this.

Includes:

Testing Head
Threaded Mount Plate
Key
Original Hard Case
Power Supply Cable

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Rigaku X-Stream 2000 Cryogenic Crystal Cooler System CP830, XS-2000 Lab

ITEM-42071

Rigaku X-Stream 2000 Cryogenic Crystal Cooler System

This system was removed from a university lab where it was surplus to requirements.

The Rigaku X-Stream 2000 main unit did not power on when tested with a 3 Phase test plug. It is in good cosmetic condition with minimal wear.

The cryogenic crystal cooler powers on and is in good condition with minimal wear. It has passed a PAT test, but no further testing was performed.

Due to the main unit not powering on, this system is listed as Spares/Repair.

Specifications:

Main Unit
Model: CP830
Serial No.: 1831322-240105A
Cryogenic Crystal Cooler
Model: XS-2000
Serial No.: 800150

£ 700.00 (ex. VAT) 1 in stock

Ingeny PhorLI IPU-S Vertical Electrophoresis System

ITEM-37755

INGENYphorU IPU-S Vertical Electrophoresis System

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with marks from use.

The unit is watertight and the valve is working.

Also included:

FisherBrand HU13

FisherBrand HU6

INGENY phorLI

Deca Probe Series

Invitrogen Novex Mini-Cell

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Packard Tri-Carb 2100TR Liquid Scintillation Analyser (No Source) Lab

ITEM-42467

Packard Tri-Carb 2100TR Liquid Scintillation Analyser, ViewSonic Monitor, Epson LQ-350 Printer, and IBM Keyboard

This system was removed from a university lab where it was surplus to requirement.

The radioactive source from the Tri-Carb 2100TR was removed before it left its previous workplace.

The previous owner stated it was in working order prior to removal, however the Tri-Carb 2100TR could not be fully tested due to internal issues, including loose components and disconnected electrical cables found after removing the front panel.

Due to this, it will require recommission and is therefore listed as Spares/Repair, though it was confirmed as working before the source was removed.

Included Equipment:

Packard Tri-Carb 2100TR Liquid Scintillation AnalyserModel: A2100
Serial No.: 406445

Serial No.: RQK111800366
Year: 2011

Epson LQ-350 PrinterModel: PA81A
Serial No.: R9By022952

IBM KeyboardModel: RT3100 V:5NTWUK
Serial No.: 82490922

Included Accessories:

69 x sample holder racks with 18 small sample positions.
31 x sample holder racks with 12 large sample positions.
41 x Protocol Plugs Part No. 7000675.
2 x packets of rack labels.

Manuals:

1 x Tri-Carb Models 2100TR/2300TR Operation Manual.
1 x Tri-Carb 2000 Series Operation Manual.
1 x Epson LQ-300+II Printer Setup Guide.
1 x set of Tri-Carb Performance Certificates.
1 x DOS 3.30 User Guide.
1 x DOS 3.30 Reference (Abridged) User Guide.

Software:

1 x IBM DOS 3.30 on 3.5" and 5.25" diskettes (may be incomplete).
1 x set of 9 Tri-Carb A2100TR 3.5" Install Discs.
1 x Epson LQ-300+II Software CD-ROM Disc vol 2.1.

£ 700.00 (ex. VAT) 1 in stock

Coffetek Gourmet Vitro 6 4 Cannister Touch Display Coffee Machine

ITEM-44400

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. it will likely need a service before it can be used again.

Key not included.

£ 700.00 (ex. VAT) 1 in stock

Coffetek Gourmet Vitro 6 4 Cannister Touch Display Coffee Machine

ITEM-44403

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, but it has been out of use for 5+ years.

It will require a service.

Key not included.

£ 700.00 (ex. VAT) 1 in stock

Coffetek Gourmet Vitro 6 4 Cannister Touch Display Coffee Machine

ITEM-44404

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, but it has been out of use for 5+ years and it would require servicing before use.

Key not included.

£ 700.00 (ex. VAT) 1 in stock

Denford Microrouter V5 Pro CAM CNC System with Software

ITEM-44931

Denford Microrouter V5 Pro

This system was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. The vacuum pump is functional. However, we are unable to conduct further testing at our facility.

Included:

Denford Update Disc
Denford Disc
Denford QuickCam Pro CAM Software
Denford VR CNC Milling Software
Denford CNC Projects Suite Milling
Denford QuickCam 4D Milling CAM Software
User's Manual
Denford CAD/CAM Design Challenge

£ 700.00 (ex. VAT) 1 in stock

Coffetek Gourmet 83545 Touch Display Coffee Machine

ITEM-44402

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, but it has been out of use for 5+ years.

It will require a service.

Key not included.

Specification:

Model- Gourmet
Machine number- 83545
S/N- 60014387

£ 700.00 (ex. VAT) 1 in stock

Envair Bio 2+ Class 2 Biological Safety Cabinet Lab

ITEM-46744

Envair Bio 2+ Class 2 Biological Safety Cabinet Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition, with some surface wear, and is in good working order.

£ 700.00 (ex. VAT) 1 in stock

Lachat Instruments XYZ Autosampler Model ASX-260 Series Lab

ITEM-46756

Lachat Instruments XYZ Autosampler model ASX-260 Series Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

Millipore Elix 5 Water Purification System + 60L Tank Lab

ITEM-46763

Millipore Elix 5 Water Purification System + 60L Tank Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition with signs of age and powers on, we are unable to test it further at our facility.

Please not; the included filter has expired, therefore it will require a replacement before use.

£ 700.00 (ex. VAT) 1 in stock

Agilent 1100 Series G1313A Lab

ITEM-38444

Agilent 1100 Series G1313A

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Item does not contain the Sample Tray.

£ 700.00 (ex. VAT) 1 in stock

Hewlett Packard / Agilent 1100 Series HPLC G1313A Autosampler Lab

ITEM-38346

This Hewlett Packard / Agilent 1100 Series HPLC G1313A Autosampler was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition and powered up.

When powered up, the item ran a start-up self-test that displayed the motor in good working order, we are unable to test this item further at our facility.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Job Lot of 6 Hewlett Packard 1100 Series HPLC Units Spares or Repairs

ITEM-38580

Job Lot of 6 Hewlett Packard 1100 Series HPLC Units Spares or Repairs

These were removed from a laboratory where they were surplus to requirements.

All items are untested and are in reasonably good used condition.

Due to the items being untested and missing various parts, this job lot is listed as Spares or Repairs.

Included is;

Hewlett Packard 1100 Series HPLC Units:

1 x G1316A Column Compartment

Serial No. DE64302229

Missing front faceplate

3 x G1314A Variable Wave Detector

Serial Nos. JP11614743, JP64202341, JP11615583

All missing detector parts and one missing rear communication board

1 x G1311A Quaternary Pump

Serial No. DE70301670

Missing valve parts

1 x G1312A Binary Pump

Serial No. DE43616189

Missing a channel pump

3 x 1100 Series Solvent Trays

1 x 1200 Series Solvent Tray

Agilent Technologies 1200 Series top and bottom casings for G1322A De-gasser

£ 700.00 (ex. VAT) 1 in stock

Agilent HP 1100 HPLC Autosampler Model G1313A Lab

ITEM-41319

Agilent HP 1100 HPLC Autosampler Model G1313A Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

Agilent Technologies 1100 Series Degasser - G1322A Lab

ITEM-45004

Agilent Technologies 1100 Series Degasser - G1322A

This system was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition and powers on, but no further testing was carried out.

Serial No.: JP73013527

£ 695.00 (ex. VAT) 1 in stock

Dynex Technologies Scientific OPSYS MR Microplate Reader Lab

ITEM-39804

Dynex Technologies Scientific OPSYS MR Microplate Reader

This was removed from a university lab where it was surplus to requirements.

The unit powers up and passes all self-tests with no faults.

It is in good cosmetic condition with minor marks.

£ 690.00 (ex. VAT) 1 in stock

Canon XF305 HD Video Camera Camcorder With Tripod

ITEM-38024

Canon XF305 HD Video Camera Camcorder With Tripod

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and good working order, we are unable to test it fully at our facility.

The unit has been etched with the previous owner's identity. This has been hidden from the photos to protect the client.

Batteries, case & tripod included.

No charger included.

£ 690.00 (ex. VAT) 1 in stock

Dionex Eluent Generator EG40 Lab

ITEM-38968

This Dionex EG40 Eluent Generator was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It passed self tests.

It is in good cosmetic condition with minor marks.

All Products

Filters