All Products
Items 1801 to 1850 of 3343
£ 750.00 (ex. VAT) 1 in stock
Sigma 1-14 Benchtop Centrifuge w/ Rotor 14800 RPM
ITEM-52707
Sigma 1-14 Benchtop Centrifuge with Rotor – 14,800 RPM
This item was removed from a facility where it was surplus to requirements.
The unit is in good cosmetic condition and is in good working order.
Please note that a high-pitched whine becomes noticeable when the unit is operated above approximately 10,000 RPM.
£ 750.00 (ex. VAT) 1 in stock
Taylor Hobson Model K Pantograph Engraver 110.902.324
ITEM-48758
Taylor Hobson Model K Pantograph Engraver 110.902.324
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and appears to be in good working order.
There are various marks and signs of use.
£ 750.00 (ex. VAT) 1 in stock
Heraeus Laminair HV Mini Laminar Flow Workstation Lab
ITEM-54719
Heraeus Laminair HV Mini Laminar Flow Workstation Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
NEW ITEM
NEW ITEM
£ 750.00 (ex. VAT) 4 in stock
Mettler Toledo E4 Pipette Multi E8-1200XLS+ Lab
ITEM-52663
Mettler Toledo E4 Pipette Multi E8-1200XLS+ Lab
This item was removed from a facility where it was surplus to requirement.
It is brand new in its original packaging.
£ 750.00 (ex. VAT) 1 in stock
Grant XUB5 Digital Ultrasonic Water Bath Lab
ITEM-51360
Grant XUB5 Digital Ultrasonic Water Bath
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 750.00 (ex. VAT) 1 in stock
Job Lot of 10 x Brunel SP27 Compound Microscopes Lab
ITEM-48559
This job lot of items comes from a university where they were surplus to requirement. They were collected from various store rooms and facilities.
These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.
None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.
They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.
The units have not been tested at all.
All microscopes are in good cosmetic condition.
Each microscope includes;
1 x Carry Case
4 x Objectives:
- 4/0.10 160/-
- 10/0.25 160/-
- 40/0.65 160/0.17
- 100/1.25oil 160/0.17
£ 750.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek 2000 Laboratory Automation Workstation Lab
ITEM-50356
Beckman Coulter Biomek 2000 Laboratory Automation Workstation
This item was removed from a laboratory where it was surplus to requirements.
It is in reasonably good cosmetic condition.
Please note: The plastic trays within the working area show signs of use and appear to be slightly warped.
The item powers on, however we are unable to test it further at our facility.
£ 750.00 (ex. VAT) 1 in stock
Limpsfield LPN1/440 Natural Gas Burner 440 KW/hr - 1.5MBtu/hr Dungs Gas Valve
ITEM-37794
Limpsfield LPN1/440 Natural Gas Burner 440 KW/hr - 1.5MBtu/hr Dungs Gas Valve
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
The item details are as follows:
Model LPN1/440
Serial No. 01191
Manufactured 8.08.14
Output 440 KW/hr
Dungs gas valve DMV-DLE 520/11
Autoflame Mini Mk.8 MM Combustion Management System 2 x part No. 10005 serial Nos. 12473, 12467
Hanning Elektro-Werke fan motor type OE7D2B-108 240v, 0.55KW
1.5" gas inlet pipe
£ 750.00 (ex. VAT) 1 in stock
Thermo Forma Model 8031 Liquid Nitrogen Dewar Tank Lab
ITEM-34946
Thermo Forma Model 8031 Liquid Nitrogen Dewar Tank
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has not been tested at our facility.
8 x Storage Racks - 12.5 x 8 x 48.5cm
9 sections per pack - 12.5 x 7.5cm
£ 750.00 (ex. VAT) 1 in stock
Applied Biosciences 7900HT Fast Real-Time PCR Complete System Lab
ITEM-41491
Applied Biosciences 7900 HT Fast Real-Time PCR Complete System Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Includes:
- 16A 1Phase cable
£ 750.00 (ex. VAT) 1 in stock
UVP UV/White Transilluminator Imaging System & Camera TMW-20 PN 95-0145-05 Lab
ITEM-31863
UVP UV/White Transilluminator Imaging System & Camera TMW-20 PN 95-0145-05
This item was removed from a university lab where it was surplus to requirements.
The system powers up and is in good cosmetic condition with minor marks from use.
It is in full working order.
Included with it is;
1x Canon Powershot G10 Digital Camera
S/N: 7188100663
£ 750.00 (ex. VAT) 1 in stock
WATERS MECHANICAL PART FOR XEVO TQ MS EPC 4285001DC1 Lab
ITEM-38448
This WATERS MECHANICAL PART FOR XEVO TQ MS EPC 4285001DC1 was removed from a university lab where it was surplus to requirements.
The item is in good cosmetic condition but due to the power supply not being included, we are unable to test, therefore the item is sold as Spares or Repairs.
Power supply not included.
£ 750.00 (ex. VAT) 1 in stock
Carl Zeiss Axioskop El Einsatz Fluorescence Microscope w/ 5 Objectives
ITEM-39731
Carl Zeiss Axioskop El Einsatz Fluorescence Microscope w/ 5 Objectives
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.
It is made up of the following modules;
Carl Zeiss Axioskop El Einsatz Fluorescence Microscope
Model: Axioskop
Serial# : 23 7412
Carl Zeiss Microscope Power Supply VHW 50f-2b
Model: VHW 50f-2b
Serial#: 39 26 42
Lamp hours: 254.24
Carl Zeiss NAG 2, 12V 100W Stab Power Supply
Model: NAG 2 12V 100W
Serial#: 39 25 85
Carl Zeiss HBO 50 Lamp housing
Model: HBO 50
Serial#: 44 72 20
Carl Zeiss 12V 100W Halogen HAL Lamphouse
Model: 12V 100W Halogen HAL
Serial#: 44 72 18
Pl 10x/20 Eyepiece x 2
Serial#: 44 40 32
The following Objectives:
Zeiss Plan-NEOFLUAR
2,5x/0,075 ∞/-
Serial#: 44 03 10
Zeiss ACHROPLAN
40x/0,65 ∞/0,17
Serial#: 44 00 50
Olympus SPlan20PL
0,46 160/0,17
Serial#: 80 63 58
Zeiss ACHROPLAN
10x/0,25 Ph1 ∞/-
Serial#: 44 00 31
Zeiss ACHROSTIGMAT
5x/0,12 ∞/-
Serial#: 44 01 20
£ 750.00 (ex. VAT) 1 in stock
Integrated Technologies G-Sealer Variable Temperature Sealer S120499-1-A002
ITEM-39840
Integrated Technologies G-Sealer Variable Temperature Sealer S120499-1-A002
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order.
It is in good cosmetic condition with minor marks.
£ 750.00 (ex. VAT) 1 in stock
Prior Optiscan ES9Z Microscope Stage Controller with CS152Z Module Lab
ITEM-24239
Prior Optiscan ES9Z Microscope Stage Controller with CS152Z
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.
Included with it are;
1 x Rotary wheel control module with up, down and speed buttons. Model CS152Z Serial No. 36341
1 x 12v power adapter
£ 750.00 (ex. VAT) 1 in stock
BOC Edwards Turbomolecular Pump EXT 255Hi B753-03-000 Lab
ITEM-24459
BOC Edwards Turbomolecular Pump EXT 255Hi B753-03-000
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has not been tested.
£ 750.00 (ex. VAT) 1 in stock
BOC Edwards Turbomolecular Model Pump EXT 255HI B763-03-000
ITEM-24460
BOC Edwards Turbomolecular Model Pump EXT 255HI B763-03-000
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has not been tested.
£ 750.00 (ex. VAT) 1 in stock
Sanyo MCO-17AI CO2 Incubator Lab
ITEM-44771
Sanyo MCO-17AI CO2 Incubator Lab
This item was removed from a university lab where it was surplus to requirement.
The unit powers up and is in good working order.
It is in good cosmetic condition.
Specifications;
- Model: MCO-17AI
- Serial#: 90100724
£ 750.00 (ex. VAT) 1 in stock
Corbett Robotics CAS1200 Liquid Handling System
ITEM-45135
Corbett Robotics CAS-1200 Liquid Handling System
This item was removed from a university laboratory where it was surplus to requirements.
The system powers on and is in good cosmetic condition.
Includes:
- Manual
- Model: CAS-1200
£ 750.00 (ex. VAT) 1 in stock
Scanbur Scantainer Cabinet Model 50-SCNT-1-110 Lab Animal Welfare
ITEM-42844
Scanbur Scantainer Cabinet Model 50-SCNT-1-110
This item was removed from a university laboratory where it was surplus to requirements.
The cabinet powers on with the fan running. Airflow is adjustable via the control dial, and air was observed being drawn upwards to the top duct during testing.
The dials display ambient temperature and relative humidity. However, the “Insufficient Flow” warning light illuminated when the fan speed was turned to half speed and lower.—likely due to a blocked or saturated inlet filter on the bottom panel.
No further functionality testing was conducted.
Includes:
- 5 internal shelves (138 x 43cm)
- 4 lockable castors
- Integrated fan system
- Flange for optional extraction duct
Model: 50-SCNT-1-110
Cabinet Serial No. 08066
Extractor Serial No. 08079
£ 750.00 (ex. VAT) 1 in stock
Scanbur Scantainer Cabinet Model 50-SCNT-1-110 - Animal Welfare Lab
ITEM-42841
Scanbur Scantainer Cabinet Model 50-SCNT-1-110
This item was removed from a university laboratory where it was surplus to requirements.
The cabinet powers on with the fan running. Airflow is adjustable via the control dial, and air was observed being drawn upwards to the top duct during testing.
The dials display ambient temperature and relative humidity. However, the “Insufficient Flow” warning light remained illuminated even at maximum fan speed—likely due to a blocked or saturated inlet filter on the bottom panel.
No further functionality testing was conducted.
Includes:
- 5 internal shelves (138 x 43cm)
- 4 lockable castors
- Integrated fan system
- Flange for optional extraction duct
Model: 50-SCNT-1-110
Cabinet Serial No.: 08064
Extractor Serial No.: 08075
£ 750.00 (ex. VAT) 1 in stock
Sanyo MCO-18AIC CO2 Incubator Lab
ITEM-46521
Sanyo MCO-18AIC CO2 Incubator Lab
This item was removed from a facility where it was surplus to requirement.
The unit powers up and is in good working order.
It is in good cosmetic condition.
£ 750.00 (ex. VAT) 1 in stock
Sanyo MCO-17AI CO2 Incubator Lab
ITEM-46522
Sanyo MCO-17AI CO2 Incubator
This item was removed from a university laboratory where it was surplus to requirements.
The unit powers up and is in good working order.
It is in reasonably good cosmetic condition, although the door handle has snapped off. This does not affect its functionality.
£ 750.00 (ex. VAT) 1 in stock
Heraeus Heracell 150 CO2 Incubator Lab
ITEM-46576
Heraeus Heracell 150 CO2 Incubator
This item was removed from a university where it was surplus to requirements.
The unit powers up and is in good working order (thermometer not included).
It is in good cosmetic condition but will require a replacement screw-in type CO2 filter, as the original has a broken end.
The unit was successfully tested using a filter from another incubator.
Model: Heracell 150
£ 750.00 (ex. VAT) 1 in stock
Eppendorf A-2-DWP Swinging Bucket Rotor Lab
ITEM-46180
Eppendorf A-2-DWP Swinging Bucket Rotor Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition, we have not tested it at our facility.
Specifiactions;
- Capacity: 2 x deep-well plates
- Max RPM: 3700
- Compatible Models: 5804/5804R/5810/5810R
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Perkin Elmer UV/VIS Lambda 40 Spectrometer Lab
ITEM-37946
Perkin Elmer UV/VIS Lambda 40 Spectrometer
This item was removed from a university laboratory where it was surplus to requirements.
The unit powers on but is displaying "LAMBDA 40 1.20 BUSY" and failing to proceed past this screen. The problem may be related to the 'Lamp energy attenuator', as indicated in the manual. Further functionality remains untested. Therefore, it is listed as Spares/Repair.
Includes:
- 1 x Report Builder User's Guide
- 1 x Installation, Maintenance
- 1 x Operation and Parameter Description
- 1 x UV WinLab Operation Guide
- 1 x UV WinLab Tutorials
- 1 x UK KinLab Software Guide
- Power cable
Model: Lambda 40
£ 750.00 (ex. VAT) 1 in stock
TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab
ITEM-36247
TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab
This was removed from a university lab where it was surplus to requirements.
The cabinet contains the following items.
Aerotech A3200 Ndrive CP x 5
Serial#1:577057/7
Serial#2:577057/6
Serial#3:681834/7
Serial#4:681834/8
Serial#5:681834/2
All appear to be in really good cosmetic condition with no damage. Two of the units are not inside the cabinet.
National Instruments Signal Conditioning Connector Block x 2
Model: SC-2345
Both have stickers on the front of the items
Sicker on item 1: pH Sensor
Sticker on item 2: Thermocouples Inlet/Outlet Drive Relays
There are other small electrical switches and controllers inside.
£ 750.00 (ex. VAT) 1 in stock
Parker Balston 3848 NitroFlow Lab Nitrogen Generator (2017) Lab
ITEM-55576
Parker Balston 3848 NitroFlow Lab Nitrogen Generator Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 750.00 (ex. VAT) 1 in stock
Heraeus Heracell 150 Co2 Incubator Lab
ITEM-38196
Heraeus Heracell 150 Co2 Incubator Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
It is in good cosmetic condition externally but the copper interior has tarnished.
£ 750.00 (ex. VAT) 1 in stock
Jouan VXS 570 Laboratory Deep Freezer -85C Lab ULT Ultra Low Temperature Freezer
ITEM-21171
This Jouan VXS 570 Laboratory Deep Freezer was removed from a university lab where it was surplus to requirements.
The unit powers up and was tested with a digital thermometer.
It did reach -84˚C but after opening the door for the probe our thermometer measured -76˚C.
The unit is in very good condition but would benefit frmo new door seal due to splits in the top. There is no key for the lock but it is unlocked.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Leica CM 1850 UV Cyrostat
ITEM-20636
Leica CM 1850 UV Cyrostat Spares/Repair
This item was removed from a facility where it was surplus to requirement.
During testing it failed to cool beyond -18ºc, it is therefore listed as Spares/Repair.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Applied Biosystems ABI Prism 7900HT Sequence Detection System Lab
ITEM-30573
Applied Biosystems ABI Prism 7900HT
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has the following issues.
The 7900 did connect to the PC at first but there appears to be a fault with the plate loader. The door will not open when instructed. If you try to run a program you get a 3003 error. 'unable to load the plate, Tray not at up position'.
There was a loud humming noise coming from the unit which appeared to get louder the longer it was switched on. Then would no longer connect to the PC. We have removed the side panels but cannot see any obvious issues.
It is sold for spares/repairs.
The PC is included.
Dell Optiplex PC
Dell 17" Monitor
Keyboard & Mouse
USB Cable
DVI Cable
All parts power on and work, the pc has ABI 7900HT Sequence Detection Systems Version 2.4.1 Software.
£ 750.00 (ex. VAT) 1 in stock
Drager X-am 8000 Multi Gas Detector with CO₂/H₂S/NH₃/NO Sensors
ITEM-49563
Drager X-am 8000 Multi Gas Detector with CO₂/H₂S/NH₃/NO Sensors
This item is sold on behalf of a client. It is surplus to requirement.
It is In full working order, purchased new in 2021.
Includes:
- CO₂ sensor
- H₂S sensor
- NH₃ sensor
- NO sensor
It is available for collection from Preston UK.
The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.
£ 750.00 (ex. VAT) 1 in stock
Coherent Enterprise II Model ENTCII-653 Class 4 Laser w/ Power Supply Lab
ITEM-55544
Coherent Enterprise II Model ENTCII-653 Class 4 Laser w/ Power Supply Lab
This system was removed from a facility where it was surplus to requirement.
The unit is in good cosmetic condition. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.
£ 750.00 (ex. VAT) 1 in stock
Kendro Heraeus HERAcell 150 CO2 Incubator Lab
ITEM-47519
Kendro Heraeus HERAcell 150 CO2 Incubator
This item was removed from a university laboratory where it was surplus to requirements.
The unit powers up and is in good working order. The interior and shelving show signs of corrosion, and the door latch mechanism is missing from the glass door.
Model: HERAcell 150
£ 750.00 (ex. VAT) 1 in stock
GE SuperFrac Fraction Collector Lab
ITEM-49996
GE SuperFrac Fraction Collector Lab
This system was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Please note; There is no PC or Software include.
£ 750.00 (ex. VAT) 1 in stock
RS Components Stainless Steel Vacuum Bellows UHV Ultra-High Vacuum
ITEM-50220
Stainless Steel Vacuum Bellows - RS Components
This item was removed from a facility where it was surplus to requiremet.
It is in good cosmetic condition and remains untested.
£ 750.00 (ex. VAT) 1 in stock
Woodway PPS 70 med-1 Treadmill Ergometer
ITEM-50500
Woodway PPS 70 Med Treadmill Ergometer
This item was removed from a university facility where it was surplus to requirements.
The treadmill powers on and is in good overall cosmetic condition with minimal wear.
The previous owner reported that the treadmill is fully working but will very occasionally switch itself off and require a restart. This happens infrequently, sometimes with months between occurrences.
We found no issues in testing.
The treadmill has been serviced annually, with the most recent service carried out in June 2025.
Includes:
Treadmill unit
Integrated control panel
Specifications:
Model: PPS 70 Med-I
Serial Number: 12101 0208
Min Speed: 0 km/h
Max Speed: 20 km/h
Min Incline: 0%
Max Incline: 20%Woodway PPS Med 70 Treadmill Ergometer
£ 750.00 (ex. VAT) 1 in stock
Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810
ITEM-37249
Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810
This item was removed from a university where it was surplus to requirement.
It is in good, used cosmetic condition.
Specifications:
- Type: 2-in-1 Fixed Angle and Swinging Bucket Rotor
- Max RCF: 3,114 x g (Fixed Angle), 3,490 x g (Swinging Bucket)
- Radius: 116/37 mm Fixed Angle, 130/42 mm Swinging Bucket
- Angle: 45° Fixed, 12 to 87° Swinging Bucket
- Capacity: 8 x 15 mL (Fixed Angle), 8 x 10 mL (Swinging Bucket)
- Max Speed: 300 to 4,900 rpm, adjustable in increments of 100 rpm
NEW ITEM
NEW ITEM
£ 750.00 (ex. VAT) 1 in stock
5 x Boxes Thermo Fisher Lab Armor Beads Size: 4L New & Sealed
ITEM-51178
5 x Boxes Thermo Fisher Lab Armor Beads Size: 4L New & Sealed
These items were removed from a facility where they were surplus to requirements.
They are brand new in their original packaging.
£ 750.00 (ex. VAT) 1 in stock
Applied Biosystems 7900HT Sequence Detection System RT qPCR
ITEM-53819
Applied Biosystems 7900HT Sequence Detection System RT qPCR
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 750.00 (ex. VAT) 1 in stock
Hewlett Packard E4426B ESG-AP Series Signal Generator
ITEM-53840
Hewlett Packard E4426B ESG-AP Series Signal Generator
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
- Firmware revision: B.03.60
- Firmware date: November 17 2000
- Total hours on: 54739.4
- Total hours display has been on: 45681.9
- Total power cycles: 372
- Attenuator cycles: 1107770
£ 750.00 (ex. VAT) 1 in stock
Beckman DU 520 Central Purpose UV/Vis Spectrophotometer Lab
ITEM-54917
Beckman DU 520 Central Purpose UV/Vis Spectrophotometer Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 750.00 (ex. VAT) 1 in stock
Applied Biosystems 7500 Fast Real-Time PCR System
ITEM-54237
Applied Biosystems 7500 Fast Real-Time PCR System
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Last Service: 28/10/2021
£ 750.00 (ex. VAT) 1 in stock
Sorvall SLA-3000 Superlite Centrifuge Rotor 12000RPM Lab
ITEM-55361
Sorvall SLA-3000 Superlite Centrifuge Rotor 12000RPM Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition with no signs damage present.
- Rotor Type Fixed-angle
- Material Aluminum
- Capacity 6 × 500 mL
- Maximum Speed 12,000 rpm
- Maximum RCF 24,336 × g
- Minimum RCF 6,337 × g
- Tube Dimensions 70 × 190 mm
£ 750.00 (ex. VAT) 1 in stock
12 x Hanwell IceSpy Series NP3000 Temperature Sensor Lab
ITEM-55380
12 x Hanwell IceSpy Series NP3000 Temperature Sensor Lab
This lot was removed from a facility where it was surplus to requirement.
None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.
They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.
The units have not been tested at all.
£ 750.00 (ex. VAT) 1 in stock
OHAUS Frontier FC5706 Benchtop Centrifuge w/ OHAUS 21/490 Rotor Lab
ITEM-53126
OHAUS Frontier FC5706 Benchtop Centrifuge w/ OHAUS 21/490 Rotor Lab
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Includes;
- OHAUS 21/490 Rotor 6000RPM
- Frontier Centrifuge FC5706 Instruction Manual
- Frontier Centrifuge User Guide
£ 750.00 (ex. VAT) 1 in stock
FluidX X-Seal AAS Automated Adhesive Sealer with Bambi VT75 Compressor Lab
ITEM-36368
FluidX X-Seal AAS Automated Adhesive Sealer with Bambi VT75 Compressor Lab
This was removed from a university lab where it was surplus to requirements.
The system is in good cosmetic condition and is made up of the following units;
1x FluidX X-Seal AAS Automated Adhesive Sealer
S/N: 1407
This item is in very good cosmetic condition and powered on without issue - The item carried out all of its self-checks successfully on start-up - it was hooked up to the compressor, and carried out one sealing run, performing as intended.
Bambi VT75 Compressor
S/N: VT75-01229
52x42x61 cm
28.08 Kg
This item is in excellent condition (looking almost brand new), powered on without issue, and works as intended - tested to 120 psi.
1x SMC compressor regulator (with connecting tubes)
P/N: AW10-M5
2x Compressor connecting tubes
4x Rubber grommets
1x Roll of Clear Adhesive Seal
P/N: 43-1031
2x Spare Rollers
1x Connection Valve
1x RS232 cable
£ 750.00 (ex. VAT) 1 in stock
Jouan Water Jacketed Incubator Model IG150 Lab
ITEM-29770
This Jouan Water Jacketed Incubator Model IG150 was removed from a university lab where it was surplus to requirements.
This was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with both a temp and CO2 sensor (not included). It is in good working order but will require calibration upon installation.
It is in good cosmetic condition with minor marks.
Internal dimensions are: L41cm x W41cm x H60cm.
NEW ITEM
NEW ITEM
£ 750.00 (ex. VAT) 1 in stock
Bronkhorst EL-FLOW Prestige Mass Flow Controllers – Nitrogen, Hydrogen & Helium
ITEM-58385
Bronkhorst EL-FLOW Prestige Mass Flow Controllers – Nitrogen, Hydrogen & Helium
This equipment is being offered on behalf of a client, where it is now surplus to requirements.
The lot comprises three Bronkhorst EL-FLOW Prestige mass flow controllers configured for Nitrogen, Hydrogen and Helium gas applications.
The Bronkhorst EL-FLOW Prestige series is designed for precise gas flow measurement and control within laboratory, research and process development environments.
The units are supplied used and without original packaging.
The client has advised they are able to package the equipment for transport if required.
Includes;
- 1 x Bronkhorst EL-FLOW Prestige – Nitrogen
- 1 x Bronkhorst EL-FLOW Prestige – Hydrogen
- 1 x Bronkhorst EL-FLOW Prestige – Helium
- 100 sccm maximum flow rate
- 30 bar maximum pressure
- NC control valves fitted
- Power and connection cables for all units
Normal terms and conditions do not apply to this item, which is non-returnable and non-refundable.
Items 1801 to 1850 of 3343